The manufacturer's instructions didn't adequately describe how to use install the hose via the fast-connect fitting. Thanks for covering that in this video!
Hi. I have a similar faucet but how can I turn the hanle so it starts in the upright position for hot and moves down 90 degrees forward for cold? Right now it is at -45 degrees for hot, and it touches the wall, so we can never get it to fully open, 45 degrees to the front is cold. Hope you can help
Thanks for sharing this. Any leaks so far? Many people mentioned on the Amazon's review that this faucet leaks. Few said after few days, others after few months.
Mine started leaking after a few months of installing, and now I'm having issues trying to figure out how to replace cartridge since it's different than most other models.
I just bought one off Kijiji. Although I like it, I found some very annoying design choices.. the thread pipe does not extend long enough below the sink.. My sink top is only 3/4" ply.. so would need to cut out a large chunk in order to screw on the bolt. Add to that the design with the pull out hose.. 3 hoses is difficult to pass over the washers and bolt. If pulling out the hose is not necessary, I highly advise to just get the 2 hose version, that doesn't pull out. Pulling out the hose for me is not necessary. Mine is a Forious as well... you have the 3 hose version as well.
You are an outstanding teacher. I sincerely wish every TH-cam Video was as clear and easy to follow as your video. Thank You So Much.
You're very welcome! Thanks for the feedback.
The manufacturer's instructions didn't adequately describe how to use install the hose via the fast-connect fitting. Thanks for covering that in this video!
Thank you! I just redid my kitchen and am doing the kitchen sink. I got this brand of faucet and needed to see this! Thanks!
Thanks 🙏
Thank you for your video. I’ll use it tomorrow to install my faucet!!
Huge help! Thank you so much for such a clear and helpful video ❤️
Thanks !! I got the same brand very similar faucet to install. This will be my guide. Thanks again ! Great job 👏
Thank you!! Your step by step directions are great!
You're so welcome!
Great job you guided me through doing this, my biggest issue was getting the old one out. One last step you forgot was the silicone 😅
Glad it helped. Yeah probably while recording I missed out 🙂
Thanks once again!
Just about to change my tap/faucet over & your video has helped a lot, thank you
Glad it helped
Great video thanks for sharing
Thank you! I just installed this faucet and your video really helped!! :)
Glad it helped!
Thank you so much for this!! Didn’t understand the instructions well but this was very helpful and I was able to do install easily. :)
Glad it helped!
Thanks you so much for this
You're very welcome!
Excellent instructions for this particular brand. Thank you.
Thanks 🙏
Thank you for your instructions on how to install the faucet
Thank you!
Your video is very helpful! Thanks for posting it!
Glad it was helpful!
Brilliant video. Really clear. Made the job simple. Cheers.
Great to hear!
That was really helpful, thank you very much for posting that
Thanks
Great job dude! Excellent video
Thank you sir!
Great video. Thanks!
gave me an idea! thanks so much!
Thank you for a clear concise video.
Glad it was helpful!
Thank you! This was Very Helpful!!
Glad it was helpful!
Thank you, this was very helpful.
Thanks!
Thanks for your video! Now I can install mine correctly.
Glad I could help!
Amazing and extremely helpful video, thank you
Glad it was helpful!
Thank you!
Thanks bro. Excellent information
Hi. I have a similar faucet but how can I turn the hanle so it starts in the upright position for hot and moves down 90 degrees forward for cold? Right now it is at -45 degrees for hot, and it touches the wall, so we can never get it to fully open, 45 degrees to the front is cold. Hope you can help
Much more helpful than the instructions!
Thanks. Now I'm ready to install.
Glad I could help. All the best for your project.
Great job man!
Thank you! Cheers!
Very helpful thx!
Thanks!
Champion, Thanks for the video bro
Thanks for sharing this. Any leaks so far? Many people mentioned on the Amazon's review that this faucet leaks. Few said after few days, others after few months.
Hi Miko
No leaks so far and it’s working flawlessly.
Mine started leaking after a few months of installing, and now I'm having issues trying to figure out how to replace cartridge since it's different than most other models.
Does it need the foam white thing under the metal plate or no ?
Yes you need it.
Your the best
I just bought one off Kijiji. Although I like it, I found some very annoying design choices.. the thread pipe does not extend long enough below the sink.. My sink top is only 3/4" ply.. so would need to cut out a large chunk in order to screw on the bolt. Add to that the design with the pull out hose.. 3 hoses is difficult to pass over the washers and bolt. If pulling out the hose is not necessary, I highly advise to just get the 2 hose version, that doesn't pull out. Pulling out the hose for me is not necessary. Mine is a Forious as well... you have the 3 hose version as well.
What are the screws screwing into?
In the enforcement plate under the countertop
Can you adjust the temperature with this faucet?
ofc!
It have only hot and only cold water or can have warm water?
You can control the temperature using the handle. Internally it will mix hot and cold water to give you desired water temperature
My handle keeps falling off. How do I tighten it?
Are you referring to pull on handle?
If yes, then weight on the pull on pipe is loose and you have to adjust it.
Good day why does it have 4 lines ?
4 lines? Sorry i didn’t get the question
Hiii the pause button keeps getting stuck is there a way to fix that?
That's a TH-cam app issue update your app
🕺🏿🥃🥃🕺🏻
My hot and cold lines didn't come installed and won't tighten. They just spin and it leaks. I don't recommend this faucet to anyone
You got a bad batch ask for refund mine came perfect
China made...?
Yes, Abdul. Very good quality
@@USDIY but low water pressure
Only 4mm bore compared to 10mm bore in UK standard.