Seriously thanks for posting this video. I bought the same WEWE at a liquidators store and luckily it had all the parts but not the instructions. You're a life saver! My only suggestion from watching other videos is that the plumber recommended having a towel and bowl ready for any extra water coming out of the hoses. Another good recommendation was to turn off power at the circuit breaker for garbage disposal. Better safe than sorry.
I rent but I don’t like bothering the landlord so I’m seriously thinking about changing the faucets in the bathroom and the kitchen myself, as they look like they could use changing because they are getting older and I’ve never done this before so I have discovered your videos and have been watching them because you explain things step-by-step in very simple terms and Innoway I can understand this in an easy way so thank you very much for sharing
Thank you so much for this how to guide! I'm just about to instal my WeWe faucet and I feel much more confident in my abilities after watching this. Thanks!
Only thing I would do extra is to run some threading tape around water line connections. Just extra waterproofing. Other than that you covered it all. Thx
I had this same product, one thing to not overlook is before turning on the hot and cold valves, unscrew the head of the faucet, then turn on the valves, PRIOR to turning on the water the filter will fall out when you turn it on, let it run for like 30-60 seconds. Then install everything back and you're set. One problem I had was not running the water, where hardwater and such and clog the filter right away, luckily for me the filter flew right off and I was able to inspect it and clean it and everything works fine! :)
Thanks for this, I'm going to give it a shot soon. I think I'm going to reverse the hot and cold lines, though. I want the cold when you pull the lever towards you and the hot when you push it back. Maybe. Or I'll just rotate it to the left side.
Should I run a bead of silicone around the white foam base I need to use for my 3 hole sink? I didn't -and it seems fine, but I'll have this in a rental and...
I’ve just bought one of these and have yet to install it. I only have one thing that I’m curious about: the foam pad under the deck plate seems really thick. It seems like I won’t be able to tighten the faucet down enough so that the deck plate is flush with the sink without the pad showing around the edge. I’ve tried to smash it down with my hands to sort of test it and I’m unable to get the plate to cover the foam. Does anyone have any advice or experience with this?
I don't know what I did wrong. I installed the new one and the water was running fine. I went to get my son ready for bed and came back and turned the faucet on and no water came out. I made sure the water was turned on both hot and cold. Now I can't figure out what's wrong ☹️ Thanks for a great instructional video though!
LOL I must share: so I had to replace one of these. It's SUPER hard to unscrew this plastic fixture from underneath. I'd given up and expected I'd have to get a plumber (this was after trying to loosen it or chip it away from underneath with small hammer and chisel) and then I just let loose and started whacking the faucet fixture with the hammer from the top. Voila! It broke the plastic sleeve below. SO gratifying!!! So enjoy yourself if you have to replace one.
We installed ours today and your video was extremely helpful! The hardest part was getting the old (36 year old) faucet out! Thanks for a great video!
Seriously thanks for posting this video. I bought the same WEWE at a liquidators store and luckily it had all the parts but not the instructions. You're a life saver! My only suggestion from watching other videos is that the plumber recommended having a towel and bowl ready for any extra water coming out of the hoses. Another good recommendation was to turn off power at the circuit breaker for garbage disposal. Better safe than sorry.
I rent but I don’t like bothering the landlord so I’m seriously thinking about changing the faucets in the bathroom and the kitchen myself, as they look like they could use changing because they are getting older and I’ve never done this before so I have discovered your videos and have been watching them because you explain things step-by-step in very simple terms and Innoway I can understand this in an easy way so thank you very much for sharing
Thank you so much for this how to guide! I'm just about to instal my WeWe faucet and I feel much more confident in my abilities after watching this. Thanks!
Just purchased one this last weekend. Looking forward to the easy installation!!
Only thing I would do extra is to run some threading tape around water line connections. Just extra waterproofing. Other than that you covered it all. Thx
Dude your assistance DID make this so easy to do!
I had this same product, one thing to not overlook is before turning on the hot and cold valves, unscrew the head of the faucet, then turn on the valves, PRIOR to turning on the water the filter will fall out when you turn it on, let it run for like 30-60 seconds. Then install everything back and you're set. One problem I had was not running the water, where hardwater and such and clog the filter right away, luckily for me the filter flew right off and I was able to inspect it and clean it and everything works fine! :)
You can hide the buttons by rotating the nozzle. The buttons end up on the back so they're not visible.
Thank you for this info. I’m an avid fan of your channel
Dude I know how great is this! So helpful!
Such a super helpful video! Thank you so much!
Great video!! This was extremely helpful. Thank you!!
Thanks for sharing this video! Did the hot and cold supply lines connect to a 3/8 inch or 1/2 inch connection? Thanks 👍
Thanks for this, I'm going to give it a shot soon. I think I'm going to reverse the hot and cold lines, though. I want the cold when you pull the lever towards you and the hot when you push it back. Maybe. Or I'll just rotate it to the left side.
That's a great idea! So I just need to attached the cold to hot vice versa. I may use painters tape to remarked the hoses.
Should I run a bead of silicone around the white foam base I need to use for my 3 hole sink?
I didn't -and it seems fine, but I'll have this in a rental and...
Thanks, I was able to install my faucet,
First thing I would've done was made sure the breaker was off for that outlet you have right next to the pipes
Thank you! Your video helped a lot!
I’ve just bought one of these and have yet to install it. I only have one thing that I’m curious about: the foam pad under the deck plate seems really thick. It seems like I won’t be able to tighten the faucet down enough so that the deck plate is flush with the sink without the pad showing around the edge.
I’ve tried to smash it down with my hands to sort of test it and I’m unable to get the plate to cover the foam. Does anyone have any advice or experience with this?
como desmontar las mangueras de agua de los labamanos modernos
I always start my day with a nice fresh breath of WD-40. It's how I've stayed alive until my ripe old age of 65.
Thanks
Good video, bit it would be nice if you replied to some of the questions left in the comments. It will help build your subscriber base😉
Does it bend a lot
Well done sir.
Nice video, I would have moved the switch to facing you so you can move to cold and hot easier... Installing my WEWE tomorrow..
that looks like shit! He did it correctly!
I don't know what I did wrong. I installed the new one and the water was running fine. I went to get my son ready for bed and came back and turned the faucet on and no water came out. I made sure the water was turned on both hot and cold. Now I can't figure out what's wrong ☹️
Thanks for a great instructional video though!
i almost want to just take my sink apart and put it back together
looks just like the same thing sold on ebay for nineteen bux, except the ebay ones are not branded
LOL I must share: so I had to replace one of these. It's SUPER hard to unscrew this plastic fixture from underneath. I'd given up and expected I'd have to get a plumber (this was after trying to loosen it or chip it away from underneath with small hammer and chisel) and then I just let loose and started whacking the faucet fixture with the hammer from the top. Voila! It broke the plastic sleeve below. SO gratifying!!! So enjoy yourself if you have to replace one.
Just twist the nozzle to the back and you won't see the buttons.