No Files To Show on Janome MC 9850
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2020
- Janome Memory Craft 9850 Embroidery and Sewing Machine. The mystery solved. Why don't my .jef embroidery files show on my machine? No Files to show message. If you are trying to understand why your Janome sewing machine embroidery design file is not showing on the machine when you transfer the design to the USB flash memory stick, this video will walk thru troubleshooting steps. How to format the USB stick for embroidery file transfer. How to copy embroidery files to USB stick using Mac. How to verify size of embroidery design.
Update: 08 March 2021
The information I found about stitch count limitations was outdated. The stitch count limit I mentioned is not correct the limit is much much larger although I haven’t found it documented what it is for certain.
Make sure the stick does not contain data larger than the memory on the machine. I have heard comments that the stick can’t be larger than 16 MB. I have successfully used a 32GB USB drive. Consider the machine’s memory storage capacity of 3 MB and there are designs saved on your machine already then you are using a USB with tons of data on it, the machine doesn’t have the available memory to read much more. My advice on this subject is to not STORE too many embroidery files on the USB stick. Use it to TRANSFER the design to the machine. Here is my blog about it. frecklefacedfabrichead.com/bl...
My machine:
Janome Memory Craft 9850
amzn.to/3mDzEDr
USB extension cable to save wear and tear on the machine port:
amzn.to/3HmzuJL
Where to find me:
Etsy Shop
etsy.me/2YxyOxc
www.etsy.com/shop/freckleface...
Facebook
bit.ly/2GXJvnE
Instagram
bit.ly/3npv5wj
Pinterest
bit.ly/3eUqI9t
Redbubble Shop
rdbl.co/3an9Vd4
Amazon Affiliate Disclosure
Shelley is a participant in the Amazon services LLC Associates program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. This is at no extra cost to you, Shelley will earn a small commission on qualifying purchases. - แนวปฏิบัติและการใช้ชีวิต
![[SUB] 베몬이 교관님 멘탈을 탕탕 후루후루~٩(๑❛ᴗ❛๑)۶ FOREVER 웃게 되는 갓기들의 수련회 | 돌들의침묵 | BABYMONSTER(베이비몬스터) 'FOREVER'](http://i.ytimg.com/vi/FISAO7BwIxE/mqdefault.jpg)
I literally spent an hour and a half one day trying to get my file to open only to finally figure out that it wasn't in embroidery mode!! Now it's always the first thing I check. So many things to learn! But oh so fun!
So many variables to check. I hope this helped.
I absolutely love your channel. It is so frustrating having such a great machine but there is so little about it out there.
Glad you enjoy it!
Thank you! This video was immensely useful! I just bought this machine and am very excited to use it. This info should be in the manual. I couldn't find anything about using the usb stick. Thanks to your video I learned all I had to do was format it. Thanks again!
I’m so happy you could get it working. It’s a common problem
THANK YOU! I have been embroidering on Brother machines for years and got this machine at a great deal and was really excited then the manual with it let me down. You filled in what they left out!! I can’t thank you enough!
Wonderful! Happy sewing!
I'm so happy I found your channel. Just received my machine and not even Janome has these videos for help. Thank you!
Makes my heart happy to help another creator.
I just bought the MC9850 last week and I couldn't get my files to show up on my machine.
After watching your video I was able to solve the problem. Just needed to format the USB Stick.
Didn't know that this needed to be done. Thanks for the help. I've watched most of your video's
and truly enjoy them, plan on watching the rest, :) Thanks
This makes me super happy and motivated to make more videos to help others.
I’m so happy to help.
I wish that had been a fix for me too! Glad yours is working! How frustrating is it?!
A very useful video. I had no idea that it could be this complicated. Thanks so much. I’m so glad that I watched this before I tried it.
Glad it was helpful!
@@frecklefacedfabrichead9959 Thanks again for your research. Spent 6 hours yesterday trying to transfer design to machine. So helpful!!!!!
Thank you so much for this video showing what to do when you cannot see any files on the usb stick.
Much appreciated. Have a good day.😀
I hope you were able to figure out the problem. Happy to help.
Thanks for publishing your research on how to get files to appear on the MC 9850. Maybe Janome could provide this service to its customers or pay you for the info. The MC 9850 is a great machine, but there is very little info on how to get the best out of the machine. Thanks again
So true. I suspect Janome depends on the dealers to provide the education when they sell the machine. There are educators for the embroidery software. The rest of us try to help each other.
Thank you thank you thank you wow I just got a Janome 550E and I was lost
Welcome welcome. Enjoy your new addition.
thanks very helpful
My pleasure
I just noticed a ?Corgi in your profile pic! I’m a fluffy butt mom of 2 Tri-colors! Sweet babies! Yours is very cute! ❤️
That’s Brodie. I now have another lil boy tri named Tommy. I’ve been busy with him so not much sewing lately.
do i need to buy a special software to be able to do embroidery ?
The machine has some built in embroidery designs that do not require additional software. If you want to design and digitize your own embroidery you will need software. It is also an option to purchase embroidery files online and transfer them to the machine with a USB flash drive stick.
I am so frustrated with this issue. I have tried everything and I still cannot get my machine to see files on my drive. Thank you for your video. 16 MB? is that correct? Does anything that small exist?
16 mb was the size I found on old documents. But I have successfully used 32GB usb stick. I just don’t store all my files on the usb. I merely use it as a way to transfer the design to the machine. If you have tried opening it in software to check the size fits in the hoop everything else you might need to call Janome support.
Hi can you please help me with what software you using I am having trouble too in my file
I use a free open source software called Inkscape with a plug in called Inkstitch to digitize. However, there are several free apps like Stitch Buddy you can use to open the file and check the size, but you have to pay to edit 😏.
Is it true the only usb flash it will read is up to 2gb?? For the mb4-se
I use one that is 32gb all the time. I think the key is how much data is on the stick because the machine only has so much memory to open it. That’s why I don’t store embroidery files on the stick. I only use it to transfer a few at a time.
Curso en español de la maquina janome 9850 les agradezco
Ojalá hablara español para poder hacer una lección para esta máquina.
I've been having problems downloading and transferring my images to my sewing machine
It is a common problem. There are too many variables that can cause it. I’m happy to help if I can. My email is shelley@frecklefacedfabrichead.com if you want to send me your file. I can make sure it is okay
@@frecklefacedfabrichead9959 you talking about my images I'm new to this
@@sunshine6341 the file is the common problem. If you send me the jef file I can try to load it on my machine to see if that is a problem.
@@frecklefacedfabrichead9959 ok
Wish I could hear you. Not sure if its me sorry
Sometimes when I have trouble with volume I use the CC option for subtitles. I have been trying to speak louder for my newer videos. Maybe I should remake this video.
I’m having this now my Janome 400E 7x9 hoop it’s killln me
The most common reason for this to happen is the machine is not in embroidery mode or the design is too big. Good luck. If you want me to test out the file you can email it to me. Shelley@frecklefacefabrichead.com.
Correction. Shelley@frecklefacedfabrichead.com
To complicated for a non techie….
There is a learning curve to transfer designs. There are so many reasons why it doesn't work. I hope you were able to figure it out.