Thank you. My first time ever checking out TH-cam for a solution to a problem and SUCCESS!!! I had to adapt a screwdriver into a chisel and used a skewer to measure the depth but now I have a secure screen door. Now I am a miracle worker in my hubby’s eyes 😂
Brother, thank you so much from Adelaide. My screen door wouldn’t lock (the wife let me know when she left for work.) this morning and I just took it all apart and couldn’t figure out the issue. Saw your video, and boom. Doors working. Thank you!
Thanks Bill, you saved me from buying a new lock. Had similar problem as you demonstrated the latch wouldn't engage because the strike plate was slightly too high for the latch to enter. Works great now!!👍
Thanks so much. Fixed it myself after your video info. My solution was not the depth of the recess but the middle metal plate on the door frame was too flat in and didn't fully push the little latch in enough. I eventually pushed the plate out a little and it works all the time.
Thanks Bill, very kind of you to post this video, I have just fixed my parents front wire door....they were about to pay money for a locksmith or a lock replacement and you save them. God bless you and have a wonderful Xmas. Cheers Gaz.
Thanks for the great diagnosis. I could apply to my problem door. My door’s little latch was not pressed in enough to trigger the latch to come out fully. Fixed with a couple of layers of double sided tape. The problem was the door was too far to the frame. I could have moved the strike plate closer. More work.
Same problem here. I've fixed for now with tape, but long term am thinking I need something more permanent, like moving the striker plate closer, surely there has to be an easier option though? Instructions on new packet I bought to try to fix the problem (that of course didn't work) speaks of "striker spacers" they sell, but I can't find them at bunnings or anywhere, the only spacer things they have look like they require lots of work with cutting to size & stuff, so really not saving any work to buy. I would have thought there should be a "spacer" that can be bought that would fit directly on or under the striker plate to move it out. This must be a common problem as doors move over time, so why no easy fix?
Wish I'd watched this before buying & trying to install a new lock, only to have the problem remain. There's actually a second related problem that's possible though, that was the issue in my case, that top nib has to be pressed against the metal plate & if the door has moved over time, there can be too much of a gap there & the top nib not pressing in enough, so needs the opposite to the solution here, with packing between the top nib & door frame. Your video at least got me looking at the right part to find the issue though, so thanks :)
Thanks for the video mate. I have just replaced the lock with your help. The little silver trigger works but it doesn’t stay in the slot, it comes out. Is there a way to fix it or is something wrong with the lock? Thanks for your help!!!
awesome vid, thx man. we have a weird prob with our flyscreen. we can lock it with the key, but the kids can just turn the latch and get out?!?? the lock doesn't remain locked. same as not using the key. baffled.
I have a screen door where the handle doesn't return back to the upper position. Do you think it can be fixed without changing the lock? I kinda don't want to get new keys cut if i can help it.
What if everything is ok except at 1:20 the little latch is spinning around freely causing me unable to lock the door from the inside :( I don't mind taking it apart and tinkering rather than replace the whole thing what would you advice?
Thanks Bill. Have the same screen door. My little silver locking latch has fallen out... I understand there's a small clip inside to hold it in place. Are these locks easy to open up and reposition the clip and latch? Cheers
Hi, depending on the brand the latch will be held In Differently. Very easy to open up and put back together and I have a few videos that show how to do this 👍
thanks .. saved me doing something else to fix........ ie waste my time... phew I owe you 20 minutes. take it off the end of my life. Those 20 min will suck anyway
![รวมมิตร ภาพนี้ก็ฮาเหมือนกันนะเนี้ย #4 SS2 [ พากย์นรก MEME.EXE ] | easy boy](http://i.ytimg.com/vi/kl86m9gnLt8/mqdefault.jpg)
Bill, your Channel should be Called 'Bill the go to man.' Thanks heaps fixed the problem.
Thank you. My first time ever checking out TH-cam for a solution to a problem and SUCCESS!!! I had to adapt a screwdriver into a chisel and used a skewer to measure the depth but now I have a secure screen door. Now I am a miracle worker in my hubby’s eyes 😂
8 months living in my rental and finally fixed the security door. You're a bloody legend! Thank you
Stuffed around for 3 hours until I watched your vid. Fixed in 5 minutes. Great thanks 😊
Brother, thank you so much from Adelaide. My screen door wouldn’t lock (the wife let me know when she left for work.) this morning and I just took it all apart and couldn’t figure out the issue. Saw your video, and boom. Doors working. Thank you!
You’re welcome 👍
Thanks Bill, you saved me from buying a new lock. Had similar problem as you demonstrated the latch wouldn't engage because the strike plate was slightly too high for the latch to enter. Works great now!!👍
Thanks so much. Fixed it myself after your video info. My solution was not the depth of the recess but the middle metal plate on the door frame was too flat in and didn't fully push the little latch in enough. I eventually pushed the plate out a little and it works all the time.
That was a big help, the best video that explained well how to check the lock. Thank you
How do you fix it if it’s a locked screen door and it won’t unlock - even if the key?
Legend! Spot on, problem fixed and security screen safe and lockable once again. Brilliant! Thank you 😊
Straight to the point! Excellent video Bill
Thanks Bill, replaced a worn out Whitco with the Yale unit you have and wondered why it wouldn't lock ...too easy!
Thank you! It was just debris making it not work 😊
Thank you, very helpful. I was about to call someone which cost over $100
Thanks Bill, very kind of you to post this video, I have just fixed my parents front wire door....they were about to pay money for a locksmith or a lock replacement and you save them. God bless you and have a wonderful Xmas. Cheers Gaz.
Thanks for the great diagnosis. I could apply to my problem door. My door’s little latch was not pressed in enough to trigger the latch to come out fully. Fixed with a couple of layers of double sided tape. The problem was the door was too far to the frame. I could have moved the strike plate closer. More work.
Same problem here. I've fixed for now with tape, but long term am thinking I need something more permanent, like moving the striker plate closer, surely there has to be an easier option though? Instructions on new packet I bought to try to fix the problem (that of course didn't work) speaks of "striker spacers" they sell, but I can't find them at bunnings or anywhere, the only spacer things they have look like they require lots of work with cutting to size & stuff, so really not saving any work to buy. I would have thought there should be a "spacer" that can be bought that would fit directly on or under the striker plate to move it out. This must be a common problem as doors move over time, so why no easy fix?
Great video Bill. Ya should of hit em' for a lawn mow while you were there, mate.
Lol I did 👍👍👍
Thanks Bill, very helpful and a straightforward demonstration. 👍
Thanks for this Bill......I just fixed my parents front security....merry Xmas mate 👍
I fixed it! Thank you.
You're a legend mate!
Wish I'd watched this before buying & trying to install a new lock, only to have the problem remain. There's actually a second related problem that's possible though, that was the issue in my case, that top nib has to be pressed against the metal plate & if the door has moved over time, there can be too much of a gap there & the top nib not pressing in enough, so needs the opposite to the solution here, with packing between the top nib & door frame. Your video at least got me looking at the right part to find the issue though, so thanks :)
That makes sense. I never thought of that. Thanks!!
Thankyou! Great video! Great explanation, very helpful!
This was top quality advice, thankyou
👍
Your gopro/helmet body camera is so much better to watch! Thanks!!
It’s much easier to record 👍
@@billshowto u need to hook in an led light too, we couldnt see in the hole.
Thanks Bill ❤
you’re welcome 👍
Thanks Bill.
👍
Thanks Bill, much appreciated, really helped me out!
You’re welcome 👍
Thanks for the video mate. I have just replaced the lock with your help. The little silver trigger works but it doesn’t stay in the slot, it comes out. Is there a way to fix it or is something wrong with the lock? Thanks for your help!!!
awesome vid, thx man. we have a weird prob with our flyscreen. we can lock it with the key, but the kids can just turn the latch and get out?!?? the lock doesn't remain locked. same as not using the key. baffled.
so how do you fix the locking mechanism that keeps falling out when you close the door?
So is there i can do to fix my lock if if not what you suggested? Or a new is needed? Thanks
Thank you ❤🙏
with my one, it only locks using the key. but if I simply lock it using the lever , it unlocked when you open the door
Bill please help im installing new lock but snib keeps falling out and when I put it in it won't turn all way up.
good that was very helpul thanks
I have a screen door where the handle doesn't return back to the upper position. Do you think it can be fixed without changing the lock? I kinda don't want to get new keys cut if i can help it.
Hi, usually this would be due to the spring failing. You can replace the lock body and cover whilst still using the old cylinder 👍
Thanks bill, great video
👍👍
Thanks Bill 👍👍👍
Hi im able to completely remove the whole thing but the big block doesnt move, tips?
Great video, but not what the prob is on my door. Will your next video be on how to fix a lawn mower? XD
What if everything is ok except at 1:20 the little latch is spinning around freely causing me unable to lock the door from the inside :(
I don't mind taking it apart and tinkering rather than replace the whole thing what would you advice?
Sounds like a replacement. The parts wear out over time 👍
My security lock on the handle keeps popping off and falls out sometimes when I lock/unlock the door... How do I stop this? It's a new lock. :)
Wear did u get the door it cool i would like one.
Is there anyway to fix it if the problem is that when you push in the little bit the larger piece doesn’t pop out at all?
Thanks Bill. Have the same screen door. My little silver locking latch has fallen out... I understand there's a small clip inside to hold it in place. Are these locks easy to open up and reposition the clip and latch? Cheers
Hi, depending on the brand the latch will be held In Differently. Very easy to open up and put back together and I have a few videos that show how to do this 👍
Cheers Bill
thanks .. saved me doing something else to fix........ ie waste my time... phew I owe you 20 minutes. take it off the end of my life. Those 20 min will suck anyway
Will the chisel cut your grass ???
What if I slammed the door too hard and screen door locked from inside and I can't get in.
wow matey, cut your grass... just cut your grass.... hahaha
Legend has it... Whoever owns the property still hasn't cut the grass...
👍🏽
Phukkn Oath