How to Replace a Gas Grill Regulator
ฝัง
- เผยแพร่เมื่อ 12 เม.ย. 2021
- Low flame on your Barbecue Gas Grill could be a bad regulator. Reset the regulator before replacing the regulator. The hose on the gas grill in this video kinked and restricted the flow of propane gas to the burners, causing low flame and a low heat condition.
There are hundreds of videos at Know How Now, subscribe so you can always find the channel…. It’s free. I always respect your time and do my best to keep the videos brief, but informative. Check out the channel with this link:
www.youtube.com/@Know-How-Now...
Disclaimer: Due to factors beyond the control of Know How Now, I cannot guarantee against improper use or unauthorized modifications of this information. Know How Now assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Know How Now recommends safe practices when working and or with tools seen or implied in this video. Due to factors beyond the control of Know How Now, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Know How Now. - แนวปฏิบัติและการใช้ชีวิต
You might be interested in this Know How Now video - Make Hard to Open Vinyl Window Slide Easily th-cam.com/video/LKxyAiBznNY/w-d-xo.html
There are hundreds of videos at Know How Now, subscribe so you can always find the channel…. It’s free. I always respect your time and do my best to keep the videos brief, but informative. Check out the channel with this link:
www.youtube.com/@Know-How-Now/videos
Very efficient description and very helpful
Super helpful!!
Great explanation 👌
Excellent!!!
It wouldn't come loose from the grill, Tried pb blaster. Tried for three days and it wouldn't budge. Finally asked my father for help. He said they probably put it on with locktight. He warmed it with a propane torch and got it off easy.
Thanks for taking the time to share how you solved the problem, Dana. I love when people add comments like yours.
Thank you so much for this video!! I truly appreciate how thorough you are in explaining every step!
You are welcome! Thanks for commenting and watching the video.
Great video! Thanks!
You are welcome!
Great verbals. You were clear giving instructions and showed your work well thank you.
You are welcome. Thanks for the compliment, I try to make quality videos. Happy Thanksgiving if you celebrate it.
Thank you. I was not certain which way to turn to loosen. Your video helped.
You're welcome, Nelson.
But she didn’t say she said turn it this way and since we are on video I don’t want sure if we were looking at it backwards
Excellent, thanks!
You're welcome, Don!
I am replacing my regulator hose because I've added a Little Griddle to the gas grill and require a little extra BTU. The new regulator has an adjustment valve on the regulator so that I have a range of 10 psi (standard from most factories up to 30 psi. I think I'll make my adjustments incrementally so I have hair left after the change .
Very helpful. Thank you
You're welcome, it's my pleasure to help.
Thank you
You're welcome
Love your voice!
Many have joked that I am Jody Foster. lol.
@@Know-How-Now Oh yeah, I can see the similarity!
Thank you so much I reset my valve
You are welcome, Lynette.
Where have you been all my life ,I so afraid to do this!!
Thank uuu
You are welcome, Monica. It's my pleasure to help.
@@Know-How-Now 👏⚘👍
👍👍👍
The regulator hose that I removed had a compression fitting without any rubber gasket. However, the new one that I got from Amazon has the exact same fitting but WITH a rubber gasket? Anyone know what to do in this scenario? Remove the gasket? Keep it?
I'd try it with the gasket first. Brush soapy water around the connection to confirm it's not leaking. Try same thing without it if it leaks. If it leaks both ways.... back to Amazon it goes.
mine doesnt have that yellow fitting on the original grill side
its the metal clamp thing directly to the tell
so there is no way to diconnect it
any ideas ?
I'm not totally clear about your question. You are saying that there is no fitting on the hose where it connects to the grill?
@@Know-How-Now yes
its the metal silver piece before the regulator
directly to the tee piece on grill which goes to the top cook side and where all burners come to it from other side
no fitting
My thought is to go to the manufacturer's website and look for replacement parts or look for a support phone number and call them. It sounds like you may have to buy a part there.
👍🏻👏🏻
"Peanut Butter" Blaster really works, but the smell!! Yuck.
Happy grilling. 😎😋
Yes ! You had better be outside when you spray that stuff !! I am surprised they haven’t put Febreeze in it since it’s in EVERYTHING else !
Hi any new videos coming up?
Yes, I have some video clips for a few and haven't found the time to put them together. I had a crash on my bicycle in September that laid me up for a while. I am almost fully recovered.
@@Know-How-Now Hope your healing up...I enjoy the videos you put out.
No thread sealant on your connection?
There is a gasket on the end, no thread sealant needed. If it were a pipe with tapered thread, then tape or sealant would be used.
thanks@@Know-How-Now
🥳🥳🥳🥳🥳❤❤❤❤👋🙋♂️🙋♂️🍒
First.
wish you would of showen the flame difference,.
WOULD HAVE SHOWN not would OF SHOWEN. Come on dude.
@@jackwilliams5474 bad day?
@@CryptoBates All Days are great.
First
Thank you
You're welcome