Fitting a Saxophone Tenon & Receiver for an Airtight Seal
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- In this live stream we'll be demonstrating how to fit a saxophone tenon and receiver for an airtight seal!
Here are the different tools we used in the stream:
Tenon Sizing Tool:
www.musicmedic...
Leak Tester:
www.musicmedic...
Neck Leak Isolator:
www.musicmedic...
Tenon Sizing Collets:
www.musicmedic...
Cork Lubricant:
www.musicmedic...
Key Oil:
www.musicmedic...
Thick Teflon Tape:
www.musicmedic...
Repair Courses:
www.musicmedic...
The most important repair video for me this year because I always have this problem with my saxophones. Thanks.
Glad to help!
A repair shop without cork grease??? I like the teflon method, it has less clean up. Nice video guys!
Thanks Doug!
A beautiful demonstration.
Thank you guys!
Our pleasure thank you!
This is satisfying AND Informative!
Lovely
Very Nice 👍
Thank you!
Eximia información del Tudel gracias maestros saludos respetuosos y cordiales.
¡Gracias, estamos felices de ayudar!
Hi, when I am testing for a leak in that area without any specialty tools, I should be play testing with the neck attached but without tightening the neck screw, and then do the same when I apply the teflon tape. Am I correct to say that?
How’s about king super 20 double wall necks? Just expand the body side tenon?
These are more involved. The inner sleeve of the neck needs to fit tight on the inside diameter of the body tenon. The collar on the neck goes around the "tenon" on the body tube and prevents it from rotating. What you're fitting is the inner tenon on the neck to the ID of the tenon on the body tube. The outer sleeve is not used for airtightness, it's just used to keep the neck from rotating as the player is playing. Hope this help!
Meta on Metal is not good . My tenon is forever wearing out on my MK6. So frustrating , leaking like nobody's business
Sounds like it's time to have it fit! Tenons can become out of round quite easily on instruments that are played all the time, especially if the material is a little thinner like on the vintage Selmers.