Driven 2017 Yamaha R6 Block Off Plate Install | Sportbiketrackgear.com

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 พ.ย. 2024
  • Driven 2017 Yamaha R6 Block Off Plate Install
    www.sportbiket...
    Fresh air injected into the exhaust system on modified sportbikes can cause back pressure in the headpipes and muffler due to unburnt fuel from modified fuel mapping combined with additional oxygen spontaneously combusting in a high heat environment. Our blockoff plates will stop the annoying and possibly damaging back pressure from occurring while allowing you to remove a few pounds in associated valves and hoses fromyour bike. On late model EFI bikes with 02 sensors, ESPECIALLY when using Dynojet's Power Commander V with the Autotune feature, the air injection system MUST be blocked as it will introduce additional oxygen into the system which will skew your 02 sensor's values and make it impossible to get a correct tune.
    Sportbike Track Gear is the #1 online eCommerce site for protective motorcycle apparel and performance parts. Buy popular brand name motorcycle helmets, riding gear, tires and parts at SportbikeTrackGear.com today! If you have any further questions call 888.784.4327, send an email to orders@SportbikeTrackGear.com or leave a comment. Don't forget to subscribe!
    / sportbiketrackgear
    / stg_moto
    / stg_moto
    blog.sportbike...

ความคิดเห็น • 114

  • @nickdemsey7188
    @nickdemsey7188 3 ปีที่แล้ว +2

    This guy is soooo imformative. Doesn’t miss a single thing.

  • @ttuckerTNT02
    @ttuckerTNT02 4 ปีที่แล้ว +10

    I just did this on my 2019 R6. I definitely could not of done this without your help! Keep the videos coming!

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว +3

      You are welcome, happy to help out! - Van

    • @RTK171
      @RTK171 4 ปีที่แล้ว

      Did you keep the cut off valve connected to the ecu or do you get the ecu flashed to remove the engine light

    • @ttuckerTNT02
      @ttuckerTNT02 4 ปีที่แล้ว

      @@RTK171 my ECU was off getting flashed by bauce racing and I told him that I was performing this mod and for him to go ahead and flash it for this

    • @jonathangenavia7539
      @jonathangenavia7539 4 ปีที่แล้ว

      Just got done doing this but now my bike won’t start! Help!

    • @24james
      @24james 3 ปีที่แล้ว

      @@jonathangenavia7539 - did you get it fixed? I am in SoCal so no local shops to take my 2019 R6 to for flash & dynotune. I was thinking of send the ECU to Barcelona as well.

  • @snowrider4343
    @snowrider4343 5 ปีที่แล้ว +1

    Just got my block off plates installed thanks to your vid Next is the power commander

  • @-DC-
    @-DC- 6 ปีที่แล้ว +2

    The only good PAIR system is the one that's in the bin ! Great video my man !

  • @littlez3325
    @littlez3325 9 วันที่ผ่านมา

    Awesome videos on the r6 super helpful guides! love this video and ur other install vids keep it up!

  • @jakedragsknee
    @jakedragsknee 6 ปีที่แล้ว +3

    Pain in the ass but the video helped me along. Thank you Van.

    • @sportbiketrackgear
      @sportbiketrackgear  6 ปีที่แล้ว

      You are welcome and thank you for watching! - Van

  • @TheYAMAMAHA
    @TheYAMAMAHA 2 ปีที่แล้ว +2

    Not to be one of those guys, but would vacuum plugs kinda of do the same? Obviously not as nice and well you know..

    • @sportbiketrackgear
      @sportbiketrackgear  2 ปีที่แล้ว +1

      You could do that it is just not as clean. - Van

  • @nathanlyman10
    @nathanlyman10 6 ปีที่แล้ว +3

    How come on the 17 the engine light pops on, but the 16 does not? I have my AIS deleted and had not programmer or flash and never came on

    • @sportbiketrackgear
      @sportbiketrackgear  6 ปีที่แล้ว +4

      The 17 and 18 use different electronics than the previous models do. - Van

  • @bradleyhannen3507
    @bradleyhannen3507 3 ปีที่แล้ว +1

    If you don’t have the Ais disabled with an ecu flash and you don’t keep the solenoid in place will the bike give issues starting. Just did this install and triple checked everything and the bike won’t start but will crank and fuel pump comes on with ignition. That’s the o key thing I could think of. Replaced battery as well

    • @sportbiketrackgear
      @sportbiketrackgear  3 ปีที่แล้ว

      This should not prevent the bike from starting as far as I know. We have done this before the flash and had the light turn on. The bike still fired up with the light on. - Van

  • @ivanlee2785
    @ivanlee2785 4 ปีที่แล้ว +3

    Hi Van may i know block off plate only use on track? If install already need tune the bike?

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว

      They are designed for track use. That said I am sure there are plenty of people that run them on the street as well. You do not need to tune the bike to run them. That said depending on the year, make and model of your bike you may need a flash or an AIS eliminator to keep the check engine light from coming on. - Van

  • @richlawrence1169
    @richlawrence1169 4 ปีที่แล้ว +2

    Hey Van. Love the videos. Currently building a 14 r6 for track use and bought block off plates from y’all. Question: is the procedure basically the same on the previous gen R6?

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว +2

      Thanks for the business and the kind words. The process is pretty much identical. - Van

  • @darronbuchner9113
    @darronbuchner9113 4 ปีที่แล้ว +1

    Hi, I will be installing block off plates soon and once done add a PC 5 (will order off your STG site), I will not be flushing the ECU and I have bought O2 sensor eliminators for my 2018 R6. I hear you say in the video that these eliminators arent available for this year range? Has this changed since you uploaded the video? I dont want to do all this work and then when I install the eliminators it will still give me a check engine light. Great video as always keep it up! Thanks

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว

      Sorry there is not an PAIR elim for this model. IMO flashing the ecu is the best way to go on the R6. This will improve the performance and keep the lights off. Below are links to the flash kits we offer for your bike on our site:
      FlashTune ECU Type 18 Bench Tuner Kit Yamaha YZF-R6 17-19
      www.sportbiketrackgear.com/flashtune-ecu-type-18-bench-tuner-kit-yamaha-yzf-r6-2017/
      FlashTune ECU Type 8 Bike Side Tune Kit Yamaha YZF-R6 17-19
      www.sportbiketrackgear.com/flashtune-ecu-type-8-bike-side-tune-kit-yamaha-yzf-r6-2017/

  • @TechAndMotorcycles
    @TechAndMotorcycles 2 ปีที่แล้ว +1

    The new ones are so much more complicated than my 03 lol watched video for differences

    • @sportbiketrackgear
      @sportbiketrackgear  2 ปีที่แล้ว

      The newer the bikes get the more challenging they become to work on. - Van

  • @joshuaowens4797
    @joshuaowens4797 ปีที่แล้ว +1

    You can unscrew the reed valves and remove those. However, you need reinstall the reed valve frame with the seal (gasket).

    • @sportbiketrackgear
      @sportbiketrackgear  ปีที่แล้ว

      IMO it is easier to just leave them in place. - Van

  • @matthewmyers6583
    @matthewmyers6583 3 ปีที่แล้ว +2

    Where did you get that T handle tool? I’ve looked everywhere I want it to be exchangeable

    • @sportbiketrackgear
      @sportbiketrackgear  3 ปีที่แล้ว

      Motion Pro Spinner II T-Handle
      www.sportbiketrackgear.com/motion-pro-spinner-ii-t-handle-3-8-08-0562/

  • @xroadracer
    @xroadracer 4 ปีที่แล้ว +1

    Killer video. No way I could have completed this without it. You're the bomb. There's a bike, Dyno/Tuner nearby. He seems to think it's okay to Dyno/Tune my '20 R6 with 300 miles on it. Seems kind of aggressive to pin the throttle this soon. What do you think?

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว

      We only heat cycle a new motor a couple of times before it hits the dyno or the track. I would not worry about running the bike hard at all. - Van

    • @xroadracer
      @xroadracer 4 ปีที่แล้ว

      @@sportbiketrackgear Thanks much for your input.

  • @JonWC96
    @JonWC96 6 ปีที่แล้ว +2

    What is the point to get Block off plates? thank You 😎

    • @sportbiketrackgear
      @sportbiketrackgear  6 ปีที่แล้ว +5

      You install these if you have installed a full exhaust system so you can get a proper tune into the bike. It will also reduce the popping and farting on deceleration after installing an exhaust. - Van

  • @r-monsolace2630
    @r-monsolace2630 6 ปีที่แล้ว +1

    Awesomeness at its best.

  • @justsailmiamillc2866
    @justsailmiamillc2866 4 ปีที่แล้ว +1

    I just added my driven block off plates to my 2015 R6. Installation was smooth it's fairly easy. However, once I started the bike and ran it for a few minutes, I did not have my check engine light on. Any thoughts as to why?

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว

      Beginning in 2016 the light would be illuminated after eliminating the PAIR system. Your 2015 it is not an issue. - Van

  • @martindyn4896
    @martindyn4896 5 ปีที่แล้ว

    Hey Brian,
    Seeing the placement of the block of plates towards the front. Do you think another way to get there could be via the front of the bike, radiator off and fans out of the way?
    I know it forces to do a coolant flush but maybe that's the right time to combine these two jobs at the same time.
    I did that on an FZ1 to replace the spark plugs (since I also had to do a coolant flush anyways).

    • @lillnemo1
      @lillnemo1 3 ปีที่แล้ว

      That's a possibility too.

  • @sendit2873
    @sendit2873 2 ปีที่แล้ว +1

    older vid but I was told to remove the entire reed assembly would you say that is wrong or does not really matter my bike is also a 05 model

    • @sportbiketrackgear
      @sportbiketrackgear  2 ปีที่แล้ว

      You need to use the gasket and most all of the models have the gasket and the reeds as part of the same unit. Leave it in is the way to go. - Van

  • @Marwixvlogs
    @Marwixvlogs 4 ปีที่แล้ว +1

    Hey Van, is it recommended to install block-off plates if you flash your ECU? I have the akrapovic full system on my R6 2017 with PC-V but I am currently doing a ECU flash at some company.

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว +2

      I would install the block off plates when doing all that work. End of the day you could leave it if you prefer but I would finish the job. On decel you will have more popping and farting if you leave them. - Van

  • @snowrider4343
    @snowrider4343 5 ปีที่แล้ว +1

    So I installed a m4 slip on muffler and the m4 y pipe cat delete. I have a power Commander that I’m going to have installed and the bike dynode do I still need this block off plates ?? Sorry it’s a 2018 r6

    • @sportbiketrackgear
      @sportbiketrackgear  5 ปีที่แล้ว

      If you are going to have the bike dyno tuned you will need to install the block off plates. - Van

  • @chasp_0784
    @chasp_0784 2 ปีที่แล้ว +1

    Is it bad that I miss the exhaust popping

  • @jameskwok339
    @jameskwok339 4 ปีที่แล้ว +1

    Can I get my ECU flashed before removing AIS system?

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว

      Yes you could flash the ECU while still having the AIS on the bike. - Van

  • @ivanlee2785
    @ivanlee2785 4 ปีที่แล้ว +1

    May I know I just have install fullsystem exhaust.. So I can install block off? It got any function?

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว +1

      Installing the block off plates will reduce back the popping and farting you will get on decel while on track. They also are necessary if you plan to have the bike mapped on the dyno. - Van

  • @Ro6entX
    @Ro6entX 5 ปีที่แล้ว +1

    I got my ecu flashed (expect it to be here tomorrow or monday) and just ordered some block off plates. My bike is '12 R6. Just to clarify before I go crazy with a wrench, is the 08-16 set up similar to newer models?

    • @sportbiketrackgear
      @sportbiketrackgear  5 ปีที่แล้ว +1

      Yes the project is pretty much identical my man. - Van

    • @Ro6entX
      @Ro6entX 5 ปีที่แล้ว

      @@sportbiketrackgear Okay cool. I know you mentioned this set up is more ideal for track (which I plan to do) but would any damage happen if I had to ride some before the blocks will be installed? Mainly freeway riding to/from work in case wondering.

  • @darronbuchner9113
    @darronbuchner9113 3 ปีที่แล้ว +1

    After the install i have a ticking sound. I saw on another install someone have the same problem. He removed the butterfly valve under tye block off plates. Can you confirm this or have any idea? Thanks

    • @sportbiketrackgear
      @sportbiketrackgear  3 ปีที่แล้ว

      Sounds like you have the plates on backwards. Do not remove the value as that is part of the seal that needs to be in place. Take them back off and look closely to see if they are sitting flush on the valve cover. - Van

    • @darronbuchner9113
      @darronbuchner9113 3 ปีที่แล้ว

      @@sportbiketrackgear cheers for the reply Van. Will have a look. Here is a video that is exactly what my bike sounds like now th-cam.com/video/8p5flD849HI/w-d-xo.html he replied in the comments that its the butterfly valves. Here is that video th-cam.com/video/0AsPTG-uyBA/w-d-xo.html

  • @philg6046
    @philg6046 4 ปีที่แล้ว +1

    So where can i find that little resistor he was talking about to plug in so i dont get a check engine light? I have a 08 R6

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว

      I do not believe the 2008 will get a check engine light when you eliminate the PAIR system on that model. This is more relevant for current models. You used to be able to remove this without any issues. As emission requirements changed so did the electronics on the bikes. - Van

    • @philg6046
      @philg6046 4 ปีที่แล้ว

      Good deal. Thank ya sir!

  • @vrodlifts
    @vrodlifts 3 ปีที่แล้ว +1

    Quick question - I have a 2009 Yamaha R6. just ordered a full M4 exhaust from you guys and i plan to put a K&N Air filter on as well. i’m getting the bike dyno tuned come April. I ride street 24/7 with OCCASIONAL track days (4 in the summer MAX). I actually like all the popping on deceleration and any pops when shifting but, if i DONT install these, would it damage my engine in any way? Also, do i NEED to have this done before i get it dyno tuned? I would appreciate any and all responses!

    • @sportbiketrackgear
      @sportbiketrackgear  3 ปีที่แล้ว +1

      You will not hurt the engine if you do not install the plates. That said when you take it to the dyno you should have the PAIR system removed so the tuner can build you a good map. Thank you for the business! - Van

    • @vrodlifts
      @vrodlifts 3 ปีที่แล้ว

      @@sportbiketrackgear Thank you so much for the response! It is greatly appreciated. What is the ‘PAIR’ system?

    • @lillnemo1
      @lillnemo1 3 ปีที่แล้ว

      Alternative to removing the system is plugging the tubbthat comes from the airbox (ex a marble) of pulling the connector of the airpump

  • @Gunmaker55
    @Gunmaker55 3 ปีที่แล้ว +1

    What’s the benefit of gettin block off plates ?

    • @sportbiketrackgear
      @sportbiketrackgear  3 ปีที่แล้ว

      They help to reduce popping and farting on decel, help a tuner build a better map and removing the PAIR system drops a little bit of weight. - Van

  • @thereal_FASTA
    @thereal_FASTA 3 ปีที่แล้ว +1

    Video was on point.

    • @sportbiketrackgear
      @sportbiketrackgear  3 ปีที่แล้ว

      Thanks for watching! - Van

    • @thereal_FASTA
      @thereal_FASTA 3 ปีที่แล้ว

      @@sportbiketrackgear only thing I would have done differently was the flap insert that snaps in place. Flip it 😉.

  • @IExiledGhost
    @IExiledGhost 5 ปีที่แล้ว +1

    Is it necessary to install block off plates if you have installed a full exhaust but are still running stock ECU with no tune yet?

    • @sportbiketrackgear
      @sportbiketrackgear  5 ปีที่แล้ว

      No you do not have to install the plates in this case. When you are ready to flash the ECU do the plates at the same time. - Van

    • @lillnemo1
      @lillnemo1 3 ปีที่แล้ว

      You NEVER ... NEED to replace them.

  • @orlyperez2004
    @orlyperez2004 5 ปีที่แล้ว +1

    Hey Van can I remove the ais with the stock exhaust system on it?

    • @sportbiketrackgear
      @sportbiketrackgear  5 ปีที่แล้ว +1

      Hot sure why you would want to do this but do not believe it will cause any problems for you. - Van

  • @yzf46r21
    @yzf46r21 3 ปีที่แล้ว +1

    Hello 👋 im beginner why install block off?? I want reason 😋

    • @sportbiketrackgear
      @sportbiketrackgear  3 ปีที่แล้ว

      You would install this when you are building a track bike and eliminating some of the emissions systems. This allows a tuner to build a more accurate fuel map. - Van

    • @yzf46r21
      @yzf46r21 3 ปีที่แล้ว

      @@sportbiketrackgear thank you sir : )

  • @berniejamespomario6355
    @berniejamespomario6355 4 ปีที่แล้ว +1

    Why do block off plate is need in r6??

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว +1

      If you have installed a full exhaust system and plan to have a dyno run done this needs to be done as well. - Van

  • @Scrotumlips
    @Scrotumlips 6 ปีที่แล้ว +1

    I installed block off plates took them back off an there was fuel on them an my bike sounded like a v motor could this be the reason?

    • @sportbiketrackgear
      @sportbiketrackgear  6 ปีที่แล้ว

      Sounds like you had the plates misinstalled, have seen this a couple of times. It makes a strange noise for sure. - Van

    • @Scrotumlips
      @Scrotumlips 6 ปีที่แล้ว +1

      No there on right the sound is coming from my exhaust like I have a miss. I had 6 codes on my r6s 13,15,33,34,35,36. But all the coils are firing I dont understand I'm stumped all I did was valve adjustment. The throttle response just isnt there an sounds weird

    • @Scrotumlips
      @Scrotumlips 6 ปีที่แล้ว

      @@sportbiketrackgear thanks for the reply

    • @sportbiketrackgear
      @sportbiketrackgear  6 ปีที่แล้ว

      Valve adjustment is a pretty big job. I would suggest double checking your work if you did not have a light before you did the valves. - Van

    • @Scrotumlips
      @Scrotumlips 6 ปีที่แล้ว

      @@sportbiketrackgear thanks, in the process of taking it to a buddy who is a Yamaha mechanic.

  • @yamaharacingr667
    @yamaharacingr667 4 ปีที่แล้ว +1

    why someone remove the Valve plates?

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว

      You do this when you install a full exhaust system and have some back firing on decel or plan to get a full tune. - Van

  • @dover1966
    @dover1966 5 ปีที่แล้ว +1

    Mine still back fires why please answer???i installed them and it still back fires like if i didn't install anything

    • @sportbiketrackgear
      @sportbiketrackgear  5 ปีที่แล้ว

      A little bit of this is normal, depends on the conditions when it occurs etc... Have you flashed the ecu or installed a fuel controller? - Van

    • @dover1966
      @dover1966 5 ปีที่แล้ว +1

      @@sportbiketrackgear yes still back fire's idk if the person who installed it installed it wrong but im worried

    • @dover1966
      @dover1966 5 ปีที่แล้ว +1

      @@sportbiketrackgear do u have a shop in California

    • @sportbiketrackgear
      @sportbiketrackgear  5 ปีที่แล้ว

      @@dover1966 Odds are you are good to go. Have you asked the shop to double check their work? Do you know exactly what they installed?

    • @sportbiketrackgear
      @sportbiketrackgear  5 ปีที่แล้ว

      @@dover1966 No sir, we only have the shop here in MI. We do not service bikes, we only sell parts and accessories. - Van

  • @millimusic
    @millimusic 9 หลายเดือนก่อน

    THANK YOU

  • @Mario-tq9pi
    @Mario-tq9pi ปีที่แล้ว +1

    all tools would be helpful

  • @edcaso11
    @edcaso11 6 ปีที่แล้ว

    hello such greetings from Mexico friend a question in which part of the United States you will soon visit the country and I would like to know your workshop and your tune I would appreciate the answer

    • @sportbiketrackgear
      @sportbiketrackgear  6 ปีที่แล้ว

      We do not do dyno tuning here at STG. If you want to stop by we are located at 56844 Mound Road, Shelby TWP MI 48316.

  • @LostLarz
    @LostLarz 3 ปีที่แล้ว +1

    I hope I put these on right lol those plates were a bitch to do in 100 degree weather pardon my French

    • @sportbiketrackgear
      @sportbiketrackgear  3 ปีที่แล้ว

      If you followed this you will be good to go. - Van

  • @srwardo93
    @srwardo93 4 ปีที่แล้ว +1

    Ok... I just need it a cheaper way to NOT get the check engine light, just leave the solenoid plugged in.... THANKS

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว +1

      You can leave the solenoid plugged in if you prefer. - Van

  • @keepup2472
    @keepup2472 6 ปีที่แล้ว

    Best

  • @JamieS1992
    @JamieS1992 4 ปีที่แล้ว +1

    i watched this video to find out i am gonna let my mechanic deal with this i did it on the R3 but i aint gonna try on the R6

    • @sportbiketrackgear
      @sportbiketrackgear  4 ปีที่แล้ว

      For sure if you are not comfortable doing the job the best bet is to take it in. - Van

  • @adanchavez6999
    @adanchavez6999 3 ปีที่แล้ว +1

    One of my screws on my air box cover is stripped how can I remove it without damaging box and thread. Last screw I cant take off. Smh. Can I get some help?

    • @sportbiketrackgear
      @sportbiketrackgear  3 ปีที่แล้ว

      Remove the rest of the screws leaving the stripped one in. Now put some outward pressure on the the opposing edge of the airbox cover and try to remove the screw. Odds are this will work. - Van