Thanks for the vid. Just swapped bumpers on a 2015, minor notes: - The fender liners have been updated. They're not plastic anymore, more of a heavy carpeted material (guessing for sound reduction). Now the upper bolt is easily accessible without messing with the liner. - If you have a reverse camera, there is no clip on it to unplug as it's hardwired. You have to remove the whole lights/camera/buttons assembly together, no need to unplug anything. It's 5 10mm bolts. You have to do it with the bumper still kind of on the car since the camera wire is short. - The 3 metal tabs along the top (above the nissan logo) on the body of the car are easily bent, be careful when pushing the bumper back on and sliding the bumpers plastic lip into them.
at the top of the bumper, there are 3 plastic tabs. there are also 3 tabs on the metal body. where do the plastic tabs on the bumper go in relation to the tabs on the metal body?
If you're referencing the 2 electrical connections on the inside of the bumper (ie. fog lamp and license plate lamp), it's pretty straight forward what they are connected to. Either way, an image from the service manual is posted here: lh5.googleusercontent.com/-NRNymF4twNM/VO06vkVr_XI/AAAAAAAADO0/JzFOT7OOC4c/w993-h277-no/Screen%2BShot%2B2015-02-24%2Bat%2B8.53.58%2BPM.png
Thanks for the vid. Just swapped bumpers on a 2015, minor notes:
- The fender liners have been updated. They're not plastic anymore, more of a heavy carpeted material (guessing for sound reduction). Now the upper bolt is easily accessible without messing with the liner.
- If you have a reverse camera, there is no clip on it to unplug as it's hardwired. You have to remove the whole lights/camera/buttons assembly together, no need to unplug anything. It's 5 10mm bolts. You have to do it with the bumper still kind of on the car since the camera wire is short.
- The 3 metal tabs along the top (above the nissan logo) on the body of the car are easily bent, be careful when pushing the bumper back on and sliding the bumpers plastic lip into them.
Thats precisely what issues I had !!
props for doing that by yourself! now i can install a new bumper with some help!
Thanks bro helped me out before I went ahead and removed my bumper.
Great video. Thanks for the help.
Again a nice video, ty
Great video and explanation! Appreciate it.
Thank you for the video 😁
Nice job. Thx
Thanks for the video brother
The two electrical connections one connects to the license plate (black square one) the other one (gray) connects to what??
Very helpful. Thanks!
Great video very helpful thanks!
at the top of the bumper, there are 3 plastic tabs. there are also 3 tabs on the metal body. where do the plastic tabs on the bumper go in relation to the tabs on the metal body?
Does the diffuser come off the rear bumper?
Any video for the front?
thank god I didn’t remove the front taillights
Fuck the FSM, literally would rather watch your vids
Bro, it's 2015 get yourself a laser pointer!
VG
The most important part of the video. Where are the electrical connector connected to and that wasn't shown. Lol out fucking standing.
If you're referencing the 2 electrical connections on the inside of the bumper (ie. fog lamp and license plate lamp), it's pretty straight forward what they are connected to. Either way, an image from the service manual is posted here: lh5.googleusercontent.com/-NRNymF4twNM/VO06vkVr_XI/AAAAAAAADO0/JzFOT7OOC4c/w993-h277-no/Screen%2BShot%2B2015-02-24%2Bat%2B8.53.58%2BPM.png
nerd
great video very helpful