From experience, Before you take off the caliper, you should have compressed it so you could install the new brakes and rotor at the same time. Much easier is you use the crap rotor as leverage to compress.
Nissan has conveniently placed a hole on the spindle specifically for hanging the calipers. You could see the hole very clearly at 9:16. You do not have to hang the calipers on the coil spring because the hole is much closer and more convenient to do so.
dont use a torque wrench for a breaker bar, cuz that torque wrench has specific torque, and you might damage it. cheaper to buy a breaker bar than a torque wrench
I have question this looks fairly easy what do you think about a place like " just for brakes" can you screw this install up it looks striate forward your opinion thanks.
Very informative video, just one thing... NEVER use a torque wrench as a breaker bar! I have 20 years experience working with torque wrenches and that is the last thing that you want to do is knock it off spec for one reason or another.
So you say your a experienced person with jack stands? But you placed the fucking stand on your CONTROLLLLL ARMM!!!! wtf is that one day that car will slip off and kill you not joking.
!["ซี - เอมี่ " ย้อนความรัก 19 ปี ที่ต้องทนกันและกัน... | แฉ 22 ต.ค. 67 [2/3] | GMM25](http://i.ytimg.com/vi/ykv9ILzatHM/mqdefault.jpg)
![ตีสิบเดย์ [FULL] | เปิดใจ "อาจารย์ เบียร์ ฅนตื่นธรรม" นักสนทนาธรรมสายดุดัน!](http://i.ytimg.com/vi/vqaBI_mnoDk/mqdefault.jpg)
![ALLY - OH MY! [ REACTION ] 'Amarin Nitibhon' #ALLY_OHMY #ALLY #allynitibhon #แอลลี่](http://i.ytimg.com/vi/nX9qpHjVfbQ/mqdefault.jpg)
From experience, Before you take off the caliper, you should have compressed it so you could install the new brakes and rotor at the same time. Much easier is you use the crap rotor as leverage to compress.
Legend says he was never able to assembly it back together...
Nissan has conveniently placed a hole on the spindle specifically for hanging the calipers. You could see the hole very clearly at 9:16. You do not have to hang the calipers on the coil spring because the hole is much closer and more convenient to do so.
Bleeding the brakes is a wAste of time ...they are self venting, self adjusting ...great video man, thanks for posting!! Beautiful car man!!
Nice video, thanks for posting it!
Thanks for putting this together.
Great video. Thank you from France :-)
You’re the man!
dont use a torque wrench for a breaker bar, cuz that torque wrench has specific torque, and you might damage it. cheaper to buy a breaker bar than a torque wrench
Good video where is part 2 plissss
I have question this looks fairly easy what do you think about a place like " just for brakes" can you screw this install up it looks striate forward your opinion thanks.
Very informative video, just one thing... NEVER use a torque wrench as a breaker bar! I have 20 years experience working with torque wrenches and that is the last thing that you want to do is knock it off spec for one reason or another.
came here to say this
Great Video!
Yeeeeah.... So, part 2??? Awesome vid by the way
Great vid, but where is part 2?
where is part2? cant find it in your videos
awesome man keep it up!
Great video! Thanks man!
Where is part 2?
Nice DIY. I do hate seeing people with limbs underneath the vehicle while it is only on jack stands, tho.
Thank you.Now I can get out of my ass and DO IT!!!
That bolt is called a jacking screw or bolt.
where did u get u break rotors? i purchase rotors for my car and theh were not the right size
i bought mine at concept z performance, stoptech rotors and pads
I found part two guys: you play the video in reverse.
it's better/safer if yo put the jack stand on the frame, no the lower control arm which will make car move up and down.
Nice curb rash bro.....you know you can park without slamming your rims into the curb right?
Dumbass says what?
hotrodsather these cars are wide and do need special attention. Always blame the wife when curbing your rims is my motto.
Yooo where's part II?
wtf why dont you have part 2 up??
time is money, bitch. pay the man for part 2.
You really don't need part 2. Install your new products in reverse and you're done.
Fredo XD jynxed him, he probably died making pt 2
i heard stories that the rotorts actually ate him..
So you say your a experienced person with jack stands? But you placed the fucking stand on your CONTROLLLLL ARMM!!!! wtf is that one day that car will slip off and kill you not joking.
how can you see?