T-bone After Hours is our other channel Please Subscribe, link below www.youtube.com/@@TBoneAfterhours Part 1 video mentioned in this video th-cam.com/video/Ix9Vy3OmgiQ/w-d-xo.htmlsi=Upa-nj9O3TbKyMqE Part 2 video mentioned in this video th-cam.com/video/7D6B8U8F2xE/w-d-xo.htmlsi=eaHbSldmoJTijk1_ Part 3 video mentioned in this video th-cam.com/video/XBXkBT-6URg/w-d-xo.htmlsi=Xi5fO6xETe2tyzch
Why the heck didn’t I ever think about putting the pull cord on the pulley first and THEN through the exit grommet?!!! Sometimes the simplest things are the ones that evade us! 😉🔧👍
T-Bone..... I was getting so frustrated watching you struggle with the tube and the rolling cart, I couldn't decide if I should just keep laughing my butt off or drive over and help! hahahahaa Billy
@RaleysSmallEngines the.only thing is I had to take it to the mower repair shop here in Putnam county Georgia to get the carburetor worked on because of the ethanol gas in Spalding county Georgia messed it up 😐😑🥺😭😳👎😔😠😠🤬
I probably would have drilled and tapped for half a dozen T27 machine screws held in place with threadlocker, knowing how much stress that joint is subjected to constantly. Screws just long enough to get through. Otherwise, a great fix! 👍
Thanks for your comment. Most of the time it's nothing to worry about especially a Stihl. I work on a ton of them and most of them have pressure in the tank.
@@RaleysSmallEngines Thank for the info T-Bone I took my still blower out of service thinking something bad was going to happen....Im start using it again. Thanks
Recoil repair is solid but that elbow on all backpack blowers needs to swivel as you wave the tube back and forth all day in commercial properties I think this catastrophe could have been avoided if they would've simply adjusted the handle/throttle switch by loosening one pinch bolt and sliding it forward when purchased ✌️
T-bone After Hours is our other channel Please Subscribe, link below
www.youtube.com/@@TBoneAfterhours
Part 1 video mentioned in this video
th-cam.com/video/Ix9Vy3OmgiQ/w-d-xo.htmlsi=Upa-nj9O3TbKyMqE
Part 2 video mentioned in this video
th-cam.com/video/7D6B8U8F2xE/w-d-xo.htmlsi=eaHbSldmoJTijk1_
Part 3 video mentioned in this video
th-cam.com/video/XBXkBT-6URg/w-d-xo.htmlsi=Xi5fO6xETe2tyzch
It is what it is
Whatever works. Great job Tbone....👍
Nice save!
Thanks my friend, glad you enjoyed it.
Great tip on the starter rope. I like how you don’t need to guess how much you need doing it that way. No waste! Thank you for sharing.
Great job restoring the classic! Keep them coming
If it was mine that's exactly how I would fix that tube!👍
Fantastic repair
Screw works every time
Good 1 T bone
Hoping your ready for the cold front
Stay warm and keep fixing the equipment 😊
It's gonna be a cold one for sure!
Good fix T-Bone. 👍
Hey Mrs T-Bone 👋
Hey!! 😊
That’s a good fix T-bone, good camera work Mrs T , have a good-en !
She does a great job of getting the repair work to us, 😊😊😊
Thank you David & Phillip!! 😊
great fix
Good job T-bone you’re still the best there’s ever been
Old machine gets a new life guy can't ask for more !
Another awesome video tbone
Thanks my friend, glad you enjoyed it!
You made that look extremely easy!!! I would have at least lost 2 fingers. Somebody tighten the screws quick 🤣🤣🤣🤣
😆 🤣
Great job 👍🏿
Why the heck didn’t I ever think about putting the pull cord on the pulley first and THEN through the exit grommet?!!! Sometimes the simplest things are the ones that evade us! 😉🔧👍
Happy new year Tbone
Happy New Year to you too my friend!
Another good one! And the best part, it ran! Great. Happy New Year to you and Mrs. T bone.
Happy New Year Phil and family! 🎉
Self tapping screws fix a lot of things T-Bone, and thats one of them great job done👍, happy new year to you and Mrs T
Happy New Year Taylor and family! 🎉
Thank you for the video
T-Bone..... I was getting so frustrated watching you struggle with the tube and the rolling cart, I couldn't decide if I should just keep laughing my butt off or drive over and help! hahahahaa Billy
Nice
Thanks for watching my friend, glad you liked it!
👍👍👍. Thanks
Thank you too
Back in early December I had My br400 Stihl back pack blower 27 years it is still in running condition
Wow that's impressive !!! That shows how well you take care of your equipment. Thanks for sharing my friend.
@RaleysSmallEngines the.only thing is I had to take it to the mower repair shop here in Putnam county Georgia to get the carburetor worked on because of the ethanol gas in Spalding county Georgia messed it up 😐😑🥺😭😳👎😔😠😠🤬
@@robertmailhos8159 dang it
@RaleysSmallEngines you got that right Raley ethanol gas is a pain in the back pocket 💵💸
@@robertmailhos8159 yes it is
Lol.. Woo-hoo I watch over and over. Man wrestling blower hose😂
🤣 🤣
👍
I probably would have drilled and tapped for half a dozen T27 machine screws held in place with threadlocker, knowing how much stress that joint is subjected to constantly.
Screws just long enough to get through.
Otherwise, a great fix! 👍
That blower was not cooperating with your plan! Lol
It was flopping around like a fish out of water LOL
T-Bone I have a lot of pressure in the gas tank of my blower what to do. I replace the valve in the tank I still have pressure
Thanks for your comment. Most of the time it's nothing to worry about especially a Stihl. I work on a ton of them and most of them have pressure in the tank.
@@RaleysSmallEngines Thank for the info T-Bone I took my still blower out of service thinking something bad was going to happen....Im start using it again. Thanks
I have the same blower.When I shut it off it sputters for a second or twoWhat would cause that.I really enjoy your channel.Thanks Jack
Love your videos brother and your wife is smoking hott!! I wish y'all all the love and happiness and success that life can bring.
I'm glad you enjoy the videos my friend!
😊
Recoil repair is solid but that elbow on all backpack blowers needs to swivel as you wave the tube back and forth all day in commercial properties I think this catastrophe could have been avoided if they would've simply adjusted the handle/throttle switch by loosening one pinch bolt and sliding it forward when purchased ✌️
Mr Railer tell me how to replace ex.mufler on 23hp v twin Briggs.i can do it but i want to do it right. WEY.
That a boy Tbone another one out the door.
yes sir, quick fix
how many CFM will those self-tapping screws take away?? lolol