3D Printed Rocket Launcher. Anti-Tank Rocket
ฝัง
- เผยแพร่เมื่อ 7 พ.ย. 2022
- We're still humming away at getting our H.E.A.T and H.E. rounds produced and ready for the guys at OrdnanceLab to arm.
Look for them in a coming video!
This round is the culmination of all of our efforts and we will shift all testing to producing it. They will be pricey though. About $150 per test fire.
Details for Ordnance Lab upcoming tests
Specifications
Designator - 76mm MK2 H.E.A.T (High Explosive Anti-Tank)
Warhead - Conical shaped charge
Overall Length in flight - 469mm
Overall Length in cartridge - 545mm
Overall weight at launch - 849g
Rocket Motor - 236.1 Newton Second (53 lbs thrust)
Rocket Motor Dimensions - 29mmx195mm
Warhead charge - 207 grams
Shaped Charge Diameter 54.8m
Liner material - Copper
Liner mass - 45 grams
Liner opening 59.3 degrees
Standoff ratio - 1.6 diameters
Muzzle Velocity - 150 fps
Top speed - (projected) 800 FPS or 545 mph
Initial Acceleration - 28.8 Gs
Primary Boost (launch) Charge - 18g pyrodex P
Secondary Boost (launch) Charge - 50g pyrodex P
Countermass - 150g corn syrup solids (powder)
Overall weight 1287g
It’s so funny how I just said I’m about to make an rpg and the cia is recommending me this.
i need this
Those will make some nasty little shards on the receiving end too, nice!
Possibly!
i need it
@@DandSCreations plz send cad files
This is homeland security well be contacting you shortly 😂
Like the fins but personally I would use a smaller rocket engine just to keep it from slowing down as much cause the big one might not be as accurately. It’s really cool
Unguided Rockets aren't accurate anyway. If you can hit a stationary tracked vehicle at 150 yards %50 of the time you're doing great. The next version will be an be an ATGM. Also the bigger and faster burning the rocket the more accurate the projectile. A shorter a burn duration will induce less instability.
@@DandSCreations what about thrust vectoring control, that could be sick
@@DandSCreations smaller rocket motor does not mean shorter burn time. With a small geometry, it's just a weaker burn/less gas over the same time.
@@DandSCreations A 3-D printed ATGM, you absolute madman I love it. I can’t wait to see both of them in action
Would it be possible if you publish the files for this?
fr i asked this lol i like your profile pic
Don't they scrape onto the barrel?
You should add “R candy”. 😉 they’ll definitely be at your door then.
We use APCP it's for more high performance.
@@DandSCreations ohhh the very strong stuff
Super cool
Ty Dbd
What a beauty great job
Why this pfp?
@@peacebrothersgv7627 because I love my foot 🤣🤣🤣🤣
FBI wants your location sir
Already had my face to face ATF chat... It's all good
@DandSCreations I've been trying to find the files, are they released or did the atf say that's a no no
@@hunterbidenscokedealer I haven't released the shaped charge warhead files. I'd rather not put a target on my back. Eventually someone else will see our work and probably figure it out.
@DandSCreations Well damn, I'm not that good at CAD lol, I'm willing to donate to the cause though
Hamas has entered the chat.
be great if we could get the stl files
😮
I wanna do this moulage!
Where is a full video
I don't know the winglets are not actually wings, they're just symetrical parasite drag, i'll suggest you to smoothen them to make them as much wing as possible.
I think you need them to be bigger but overall very cool :]
Any chance this stuff will be on defcad for research purposes eventually? Lol
Were weighing options, this project cost alot would like to somehow recoup some of that and not break any laws.
@@DandSCreations a book would be a really interesting read as well if it were to include replicateable details. If it were just stl files I probably wouldn't buy but if there was a how too guide with a history of how it was researched it would make a really neat coffee table gun room book.
@@Ragnar.Lothbrok.3.14 Sounds like a good idea.
Hopefuly somewhere else, DefCad requires payment and doesn't allow foreigners to download.
How do the fins deploy?
Is it springs or some other simpler mechanism?
The one I’m making is potato gun with the same rocket except not folding wings, but spiraled wings.
what about an rifled barrel or an gyroscopical balanced rocket with fins?
Im currently working on developing a 3D-printed TOW that will be able to deploy controllable fins and will be gyroscopically stabilized and guided vie radio frequency! it will use a pvc tube that will be able to be mounted onto the device like a 9m133 kornet
That would be impressive
bro is in fbı watch list
Probably
I thought it is a mortar 🤣🤣🤣
Wouldn’t it be a lot easier to make a recoilless launcher?
It's both recoilless and rocket.
Can you send me the files?
Signal
Batman
arrange files for 3D printing?
The design still needs changes to be fully effective.
Some powder and a primer
Can I get those 3d printed files..!
Высуши пластик. Он "пукает"
Stl
Can I have files plz
Pls don't use rocket fuel for a AT missile, its easy do destabilyze in flight because of the velocity and the weight... do a conventional rocket launcher or a delay rocket fuel
What?
Are the STL files public?
Not at this time
@@DandSCreations, forgot to ask, do the fins have a slight angle to them in order to achieve a spin effect when they deploy?
@@jackgyver4683 This design shouldn't require spin stabilization
десь можно взяти таку 3д млдель?
В окопах, Мыкола, в окопах, ХАХАХА!
Wait ain’t those guns carbon fiber? Then I wouldn’t count that as “3d printed” yes you printed PARTS but the whole thing wasn’t “3d printed”
Do you want him to print them in cf-pla? What's the point, anyone who wants to make this could get some cf boards and cut those anyway.