I love how the fuel flows around the coolant! In other designs I’ve seen here, it’s the other way around. This is probably the better design of the two.
Clever, and simple!!!! And every bit of warmth for diesel fuel, can make a huge difference... I remember struggling in my wrecker while loading a SUV that slide off the banked highway, and I noticed my wreckers high idle for PTO / hydraulic control, the idle started to slow, and then stutter. Please note, I was 50 miles away from any help, and it was (-19 degrees F and -35 wind chill)... I drop all connections and ran to my truck cab, and rev'd the engine, and started back towards town, and would acquire the downed vehicle in less violent winter weather... If that truck stalled out due to the diesel gelling / freezing up on me, I likely would have been dead, or to say, froze to death out there... So, I will be harrowing this idea and adding this type of unit, made from aluminum or stainless steel, and wrap it with a heating blanket / pad as well... Scary situation!!! 30 seconds later, I wouldn't be writing this to compliment your idea... Well done, Sir... Thank you!
You better use fuel filter heater, made from silicone. It allows you to start the heating process, before starting the engine and so, you will have heated fuel at the ignition. And this is the most important for diesel.
Good evening! Mad Wheel, Can supply with vegetable and animal oils, used! And only micro Filter and put in a reserve tank! Logico that has to give ignition in the diesel and after approximately 10 mnutes change to the bio oil. Uses a timer solenoid! Execente work of lathe and weld. TOP!
I love how the fuel flows around the coolant! In other designs I’ve seen here, it’s the other way around. This is probably the better design of the two.
Ive made these out of old transmission coolers from scrap radiators and steel pile. Very nice!
Lol came back to say the Mercedes diesels I was making these for actually had one as a dealership option, and theyre only $35 on ebay lol.
Fantastic , Great craftsmanship, and looks good and seems to work well. Thanks for sharing.
Clever, and simple!!!! And every bit of warmth for diesel fuel, can make a huge difference... I remember struggling in my wrecker while loading a SUV that slide off the banked highway, and I noticed my wreckers high idle for PTO / hydraulic control, the idle started to slow, and then stutter. Please note, I was 50 miles away from any help, and it was (-19 degrees F and -35 wind chill)... I drop all connections and ran to my truck cab, and rev'd the engine, and started back towards town, and would acquire the downed vehicle in less violent winter weather... If that truck stalled out due to the diesel gelling / freezing up on me, I likely would have been dead, or to say, froze to death out there... So, I will be harrowing this idea and adding this type of unit, made from aluminum or stainless steel, and wrap it with a heating blanket / pad as well... Scary situation!!! 30 seconds later, I wouldn't be writing this to compliment your idea... Well done, Sir... Thank you!
Absolutely Fantastic !!
👍👍👍👍👍👍👍👍👍
Great idea.
Amazing
You better use fuel filter heater, made from silicone. It allows you to start the heating process, before starting the engine and so, you will have heated fuel at the ignition. And this is the most important for diesel.
yes but heat exchange dose not use electrical power which is very important in some cases
Well done excellent idea
I was wondering if that fixed the problem?
Good evening!
Mad Wheel,
Can supply with vegetable and animal oils, used! And only micro Filter and put in a reserve tank! Logico that has to give ignition in the diesel and after approximately 10 mnutes change to the bio oil. Uses a timer solenoid!
Execente work of lathe and weld. TOP!
very nice
Thanks!
I really do love Russia.
A company called ArticFox makes these for like $1,000 here in the US.
Превосходно. Вы не задумывались о продаже обогревателя? Привет из США. Большое спасибо.
👍👍👍🇺🇸
Heater for diesel. Culer
Heater for diesel fuelv
nice
but I give to you one ideea
to think for an diesel heat carburator
1:40 - I make a new one
Please please build a geet reactor.
Can you add subtitles instead? Becase this voice is annoying.