ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
RV Pad Site Prep and Completion
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2019
- Pad Size: 45'X30' (Supplies List Below)
Lots of dirt, gravel, and a couple hornet attack scares later we have a completed pad site. Next up - installation of the awning and creating the clearing for Oncor. Electricity coming soon (hopefully)!
Want to support our channel? - / bluespringfarm
Supplies List:
Select fill - 4 loads
Woven Geotextile Fabric -
www.amazon.com/gp/product/B07...
Roadbase gravel - 4 loads
36" wooden ground stakes
Line level - www.homedepot.com/p/Empire-3-...
Open wheel measuring tape - www.harborfreight.com/330-ft-...
String - www.homedepot.com/p/Everbilt-...
T595 Bobcat Compact Track Loader - bobcatofdallas.com/listings/b...
nice work,looks like South TX
Correct!
New sub here Great Job you guys!!! I am making a RV pad too. This looks like it turned out great! Thanks for sharing your experience : )
Great job. Im about to do almost the same down here in the Houston area. How many inches of gravel did u put on the select fill. Great advice. Thanks again.
Woo hoo go Ashley- Riley
Thanks Riley (:
👍🏻👍🏻
how much was the gravel?
Gravel in our area was roughly $260/load at the time of video.
How many yards gravel did it take?? I'm.makinh one too
Hello,
The pad took about 48 yards of gravel.
@@BlueSpringFarm tyvm I have a 21 ft class b chinook. I have a 16 inch raised pad framed and so far it has taken 12 yards of shell marl. It packs down hard. It was a low spot in the yard, not much now! I 🤔 think I need at least three more yards. (Try heoad is 22 ft long 16 ft wide and 18" deep) I will top off with crushed limestone. I'm guessing six yards tops.i have lined the wood with cement blocks as well and the wood will not touch the ground.
👍🏻👍🏻