Nice job. You should have put some aluminum plates on the inside to balance the weight out. I have 2 small piece on my jackplate .: I’m just afraid the extra weight would rip through my fiberglass
I’ll take it back out and film soon. Short answer, game changing. It’s plenty of power and I think above 40 would start being overkill. This will be a tender by crane so weight matters too.
Yep! Here you go: www.wholesalemarine.com/th-marine-cmc-5-inch-motor-mount-vertical-extension.html?gad_source=1&gclid=CjwKCAjwyJqzBhBaEiwAWDRJVNgXLNRmamcy44EEvWIlGVUjaKR0Lspi3AGpc0FwJU4TxwY291cKOhoC2JUQAvD_BwE
Nice job. You should have put some aluminum plates on the inside to balance the weight out. I have 2 small piece on my jackplate .: I’m just afraid the extra weight would rip through my fiberglass
Thanks for the tip!
Great job👏👏👏
Thank you! 😃
Wat was the results with a load in the boat. Did the 40hp make much of an improvement?
I’ll take it back out and film soon. Short answer, game changing. It’s plenty of power and I think above 40 would start being overkill. This will be a tender by crane so weight matters too.
Do you have a link for that motor mount?
Yep! Here you go: www.wholesalemarine.com/th-marine-cmc-5-inch-motor-mount-vertical-extension.html?gad_source=1&gclid=CjwKCAjwyJqzBhBaEiwAWDRJVNgXLNRmamcy44EEvWIlGVUjaKR0Lspi3AGpc0FwJU4TxwY291cKOhoC2JUQAvD_BwE