2014-2020 NISSAN ROGUE/PATHFINDER SHORT-CUT BLOWER MOTOR REMOVAL AND INSTALL
ฝัง
- เผยแพร่เมื่อ 13 พ.ค. 2023
- This video shows the step by step process I used to remove and replace the blower motor on a 2017 Nissan Rogue.
**FOR CONTRIBUTIONS:
Greetings everyone, if you found this video helpful and would like to make a small contribution to the channel, please use one of link below. Thanks in advance.
cash.app/$DIYYardie paypal.me/TheDiyYardie
These products are supplied by Amazon, I will receive a small commission from sale, but will not affect your cost..
**Link to replacement blower motor
amzn.to/3rtZbWR
**Link for free 30 day complimentary trial of Audible books and podcast
amzn.to/3YAkErF - แนวปฏิบัติและการใช้ชีวิต
*FOR PARTS*
For parts used in this video and much more, please click on the description box below the video.
**If you found this video helpful and would consider making a small donation to the channel
cash.app/$DIYYardie paypal.me/TheDiyYardie
Thanks Yardie, your video helped me out so much. I just did this for my in-laws and saved them 500 bucks. Took me about 30 minutes and was perfect for a nissan rogue 2016
This video was perfect. I’m no mechanic but this video made it that easy. 18 mins start to finish. Big win. Great video.
I appreciate you leaving your comment Matt, a few people left comments saying my was crap and unhelpful.
thank you for showing us non tech people how to do it the easy way!!!
you're quite welcome..
Hey Yardi, thanks for the tips. I did it today and it turned out to be mice building up a nest. Works great now. I have to say it is possible to do it this way but you need some skinny arms and a camera to see what you are reaching for blindly. But it does work 100%
Good to hear Joe
Good info!! 👍🏽 saved so much time! I changed my daughters motor out in just under 15 min. Thank you!!
I appreciate the compliment on my video, a few persons left comments saying my video is incomplete and missing certain steps, thanks for sharing that you were able to get it completed in 15 mins with the help of my video. big ups..
Many thanks DIY Yardie! watching the other videos on this job, I was ready to sell the car! Your process looks like the way to go. tomorrow's project simplified
Happy to hear that Jim, glad my video was helpful to you.
I'm now chilling in the heat I fixed earlier today thanks to this video, thanks for posting this for us
You're quite welcome Chris.
Just replaced mine took 30min, hardest part was the disconnection of the wire from the motor, mine was melted a bit. But the whole process worked for a 2016 nissan rouge! Thanks!
Much thanks for your comment Chris, I been getting a few comments that my video is useless and not helpful..
You’re the man! Follow your instructions just as he says you’ll be fine!
Much thanks Sean.
Awesome 👏, I was wondering if there was a short cut to removing this blower motor and here you go, thanks a lot! 👍🏻
you're welcome Cesar.
I like doing things the easy way! Thanks!
same here, and you're welcome Tony..
Thank you boss man, saved me an hour at work lol, cheers
You're welcome..
Hey, my name is Anderson and i have to say that you made this video incredible, i just did my 2016 nissan rogue blower motor replacement and just like you said i did and BANG i change that thing. I came here to thank you. I had a lot of leaves little tings also inside the chanels there but i am so happy that i did. Took me 30 min because i had to clean. The other videos that i found they were taking the whole desh and i foundo yours man. Bless you. Thanks a bunch. By.
Hey Anderson, I really appreciate you taking the time to give a positive feedback, and you're right, most of the videos on TH-cam will have you tearing down most of the dash, I like to do things the simplest way possible, again much thanks..
Hey Anderson, any trick to getting up there or just contorting the right way?
@@anthonymaltese7509you're not able to get the old one removed?
I did it. Mostly by feel. Thank you for the info. I have AC again!!!
you're welcome
Amazing! So easy!🎉
I appreciate you taking the time to leave your comment, some people don't seem to believe my short-cut actually work as I did it in my video.
Awesome! your the man. Thank you.
You're welcome Danny..
Thank you. Enjoy your videos
Much thanks Mario.
Thank you very very much worked just as you explained. Great explanation. God Bless you. Keep up the good work.
Good to hear Micheal, and you're welcome.
Very helpful
That was really helpful! God bless
You're welcome Izzy, blessings to you too..
Bought a "repair" book. For this item, the pictures were totally worthless. Thank you for your video. At least I now know it's up higher that the book leads you to think.
You're welcome Jeff, happy to hear my video was helpful to you..
Thanks man, this did the trick
You're welcome, good to hear.
@@thediyyardie7192 :)
nice job with this video. I feel confident I can DImyself, and save a bunch of $ ( that's why the 'thanks'). I look forward to viewing more of your vids
easy job, just takes a bit of patience, you can do it, and thanks again..
Thank you so much !!!!
you're quite welcome
Thank You! I just did a 2018 Nissan Rouge.
In addition to your instructions I also took out the side panel near the passengers calf/knee. The panel just snaps out.
It took me about 10 minutes to actually remove the blower. The issue was that the blower was stuck and would not rotate it clockwise.
I kept thinking am I missing something, is there another screw? Finally I just grabbed it and turned it clockwise with all my might. (engine side rotates down), and finally I heard: CLICK! The fan rotated and then I could remove it. It was easy to force it through the rear of the glove box, just bend the plastic a little.
The Install was very easy, 1 minute.
Thanks again for this great tip
-andy
You're welcome Andy, always happy to hear that my videos are helpful, and also some great additional info added from your experience doing this job .
Thanks!
much thanks for the Super thanks John, this is actually my first one believe it or not, much appreciated..👋👋👋🖖🤟👋👋
Thank you much my blower is acting up and I’ve read it could either be debris or the resistor I’m hoping it’s just debris and I can just take the motor out and get whatever is caught it in working will see tomorrow thanks again!
you're welcome, and good luck with that..
Good lookin
Big up
It popped right out 1love brotha
nuff bigups man..
Hey brotha do you have any vids on finding and replacing blower motor resistor???
@@alakinggg not me personally, but there are some here on TH-cam on other repair related channels..
Appreciate your shortcut but I have a 2014 Rogue and simply could not remove the blower motor without pulling the passenger side trim off that the glovebox mates up with. It’s not that difficult to get this apart and makes access much easier. Maybe my version of Rogue is different than later models.
After taking the blower wheel off, is it possible to reach the AC evaporator coil? Wondering if I can hit it with a foaming spray cleaner using this method.
I would doubt that would be necessary being that these cars carry a cabin air filters that keep the coils relatively clean, you may have a dirty cabin filter more so than the coil.
Blessing to you Yardie. I’m not a car guy at all and I was able to swap out motors in 30 min thanks 🙏 so much for this video. I didn’t want to mess with the center console and another video took off the pedals… Good luck with the channel Respect 🫡
Bless up John, good to hear my video was helpful, there's a lot a small jobs you can do to save yourself some money.
Thank you for this video. Do you happen tp have another product link. The one under the video says that one is unavailable and my ac motor literally went out today 😢
much thanks for letting me know Angela, I just updated that link..
Are you able to reach the resistor for the hvac blower this way since if i understand correctly its just the blower itself? You can correct me if im wrong please. Thank you for the response
No sorry, the resistor is only accessible from the drivers side by removing the accelerator pedal unit, its located opposite the blower motor.
How do you know if it’s the blower motor and not the resistor? Do you just change the blower motor first in hopes that it’s that and then if that doesn’t fix the problem do the resistor?
I’ve done these jobs multiple times but it’s been a while and I just can’t remember
Great question, The blower will usually only work on one or two of the speed settings when the resistor is going bad, not to say that it won't conk out at any time without warning, but before replacing any parts, you can unplug the power wires from the blower and use a volt meter to test for voltage coming across them with the engine running and cycling the speed control high to low, if you get a variety of voltage readings, then your issue is a faulty blower motor, but if there's no power coming from the wires no matter what speed it is placed on, then the problem is most likely the resistor.
Do you know if the blower location is the same on a 2015 Rogue?
yes Tony, its the same setup, I actually need to change the years on my video to 2014 to 2020..
Is this the same placement and set up for a 2018 rogue sport?
it should pretty much the same Kenny..
Thanks for the informative content. Are you open to doing any product review that related to Auto led lighting? Hope what we offer could be a part of your fantastic content. But I didn’t find any way to contact you. Is there a way we can reach out to you?
Great Video .
Do you know the location for the A/C and heater motor Resistor for the 2014 Nissan Pathfinder Platinum.
Much thanks, that resistor is located opposite the fan on the drivers side next to the accelerator pedal, which you will need to remove in order to access it.
@@thediyyardie7192, great . Thank you so much for your reply.
@@thaddeauscaldwell7101 you're welcome
How do you remove the electrical connection. I’m trying to remove it. Is there something I need to press on to remove it?
Yes, there's a locking clip
on one side that you have to press and hold down then pull back on the connector in order to unplug it,
How did you pop out the part at 2:34 I removed the motor but it won’t fit through the gap
between 1min to 1:30. I show where the crews that hold the plastic cover where the glovebox sits, are removed, following that I show how I pull the lower part of the plastic cover out just enough to slide the old motor out and the new one in. if you got the motor out, you're halfway there.
Where is this Mechanic located?
Very helpful! How can I get more info?
Much thanks Aston, what other info do you need?
Do i have to disconnect the battery or anything?
no, not necessary..
I’m tryn to figure out how u got that clip off
what clip is that?
do you mean for the power supply wires?
How do you get the Bracket off
What bracket are you asking about?
I took oit the screw but it stll wont budge
it unlocks turning it clockwise not counterclockwise..
We had the same problem. It barely moved.
@@brandypelletier7668 once you remove the screw, you turn it counter clockwise to remove, if its stuck, you can try taping it with a piece of stick and a hammer, tap it lightly to try to brake it loose.
On that vehicle, where is the location of blower motor resistor?
On the opposite side, next to the accelerator pedal, the entire accelerator unit has to be removed in order to access it. you can find videos how to do it here on TH-cam.
Mine has a different glove
What is the year and model of your car?
It don’t come out easy
there's a little tab at the side, you just have to squeeze it down then pull to unplug.
This video was pretty useless. There is a part of the process missing from this video. The box removal. I did this last week, 2 metal brackets are missing in this video making what he’s doing possible. Due to those brackets, the motor needs to be pulled to the right beyond them to bring it down. Which involves pulling the bottom part of the dash apart to access that area, as all the other videos show. Either he removed them without showing that part, or someone else did.
what is the exact year and make car that you are working on? what you saw in my video is exactly what I did to replace the motor, nothing missing..
You are right. There is definitely parts missing in the video. To begin with taking the screws out at the beginning is useless nothing comes apart by doing that. It just gives wiggle room to the dash. Once you get the glove box out there are other parts in the way. Mine is also a 2017 Rogue. This video is pointless. I don't know what's worse though, this video or the engineer that thought it was a great idea to shove the fan motor up in there where you have to pull everything off to get to it. 🤦♂️
@@keithcoleman4456 My video is intended to be a shortcut to do this job, it has helped thousands to do it the exact way I did it in my video, not everyone is mechanically inclined, so you may need the help of someone that is or just do the longer process, but what you see in the video is all and exactly what I did to replace that motor.
@@thediyyardie7192Except it isnt. I'm sure some people with some make and models are able to do it with your steps. But even if We have the same vehicle your video cuts and edits make it prohibitively difficult to know what you're doing. I think it's just a different make and model type of thing.
@@johnthetech72 is your car the same year and model as in my video or is it not?