Chris..what i like about you..is for sure the kick ass vehicles..and the style..no shouting..no drama..no click bait..and your eye for detail..surely deserve so many more subs.views...
I laughed so hard when you panned out from the fully installed bumper onto that lonely bumper support. Thought I was the only one that did stuff like that
Every other "flipper/builder/youtuber" needs to watch your videos and take lessons... I mean, I would have done it to my own car for sure but you went so far as to clean the dirt from behind the rear bumper cover when all it needed was a clutch!!! That's next level attention to detail my man. Seriously though, LOVE your videos, keep doing exactly what you're doing.
This series is so kickass. I'm slowly getting my Cobra cleaned up and your attention to detail has really shown me how to go that extra step to make the car really stand out.
I think it’s great you don’t edit out the little mistakes like forgetting the foam in the bumper. It’s shit we all do haha. Great progress on the ole girl!
He would have if the original clear was beyond the point of saving. With the right product, the right equipment, and the right technique you wouldnt be able to tell the difference in the new clear vs the old especially after some quality cermic coating!
@@zachniverson8816 100%. But who doesn’t want more mils to sand the orange peel out of! Think about how perfect defect free the paint can be! It’s what dreams are made of! Lol
@@brian2359 theres obviuosly plenty on the qr to take the orange peel out and to match the depth of the factory clear which also WILL NOT have any orange peel once done and again i reiterate that the clear was obviuosly thick enough mil wise to justify spraying the whole car. Also if it had any orange peel (which it did not) he would have because he is obviuosly meticulous.
Getting my own Cobra hopefully next weekend and have been binging this series to know what to look for and if I need to fix anything on it. These are awesome videos for sure! Best cobra content on YT!
@@christianfrye look for repair evidence on the core support. almost all these cars have lived long hard lives. Even cars that run are clapped out, like this one. Be careful out there. Its ok to fall in love with a POS, just don’t pay a ton for a POS. Its easy to put $30k into a $20k car
I had a Sonic Blue 2003 in 2010, 28K mile one owner, for $14K. Crazy how expensive they've become. Keep this one Chris, these blues are special and it matches your new Z06.. I've watched all of your videos, great motivation to work on my 98 cobra, like my former Termi it only has bolt-ons and low mileage. One of the very few car channels I can watch, most have annoying intros, rap music and yelling. Congrats on the success. Looking forward to seeing your blue Termi get a paint correction
Oh and I know it takes forever to edit what you feel is already a long video but trust me the process of showing each step of what you do is appreciated by surely everyone. The entire process of removing the subframe and then assembling the Teksid engine was a great example of it.
Aw man, I felt your pain when you looked over and that bumper insert was just lying there on the ground mocking you...we've all been there, lol...but not all of us suck it up and do the right thing....RESPECT!
Wow the back end looks brand new Chris! Awesome how you upgrade the cars that you restore back to value and satisfaction. Looking forward to seeing how it looks once you complete the paint correction effort!!! The wheels really make the blue stand out. The previous black wheels did not accomplish that at all!!! Great job Chris!!!!! Cheers‼️👍👊💪😎🇺🇸
That's such a nice blue. I just did an order with Rock Auto and I put you down as where I heard about them from. So expect to finally get sponsored by them and get rich. You're welcome. lol Nah, but I did put your channel down when I made the order. You are right, they are pretty awesome and faster shipping than what I selected too. Thank you sir and keep up the awesome videos!
GREAT JOB AGAIN CHRIS !! 1000% TRANSFORMATION !! GIVE A THUMBS UP TO BEN YOUR PAINT FRIEND !! ALOT OF HARD WORK GOES INTO PAINT & BODY WORK ,EVEN FOR A LITTLE FEW SCRATCHES ,GREAT BLEND JOB !!! KEEP THEM VIDEOS COMING !! JESSE VIA LAS VEGAS
Can you be honest... If you didn't do TH-cam would you go this in depth with these cars when you're just flipping them? Because man, you are insane with the level of quality you put into these cars
I'm not on TH-cam and this is the way I've always done my cars...even the ones I bought with the intentions of making a quick flip get the full treatment. There are people out there that do it the right way...we're just few and far between unfortunately.
Chris when you do the paint correction, will you please do an extended version with explanation of your process start to finish including the products you are using. I follow your channel and love all the vids and would really appreciate a full video tutorial on how you correct and detail Paint 👍
Absolutely love this channel. I love the detail, the music, the humor, even when a mistake is made, all the thorough detail. This is absolutely one of the best channels on TH-cam by far.
I knew that Marylou's right away. Biondi's does great work. They fixed a couple rust spots on my mustangs doors several years back. The car is turning out awesome, body work is the worst part of any project. (For me at least lol). Nice job Chris
That foam bumper reminded me of when you forgot to put the spring on the shock in a earlier video. Had to take everything back apart. Man that has to suck. CAN'T WAIT FOR THE DYNO!!!
Looking good Chris! Love the sonic blue paint. The expression on your face made me laugh when you forgot the foam for the bumper. Been there done that...
Love your attention to detail and how relatable all your videos are! I had to laugh at the bumper foam fiasco, we've all been there and for you to show that and not skip past it, or pretend it didn't happen, is the reason I subscribed and make sure to "like" all your videos. Thanks Chris, you keep making these videos and we'll keep watching!
Same thing! I forget which video actually popped up though but I started binging the whole series. Plus the yellow cobra series. It's nice to see the attention to detail someone else takes as I would. Makes me want to make a series on my 03 gt 🤔.
I’ve been looking forward to this episode knowing how good you are at paint correction. Having that quarter and bumper painted the car will look like new. Have a nice Easter weekend with your family. CU on the next one 😁👋🏻
Hey Chris, hope all is well. Can’t believe just how well the new paint blends…the Cobra is looking better with each upload, and the finish line is finally approaching - we’re all excited to see the final results! Thanks again for another therapeutic, and informative upload my brother. Until the next one✌🏼
Hey Chris, the car looks great ! You do good work, if I were you would keep that thing it is beautiful & goig up in value. Great video, keep'em coming 🇺🇸
Wow that was one hell of a paint job, Ben is a master, what a awesome blending the color, wow he has the talent, and you have the eye for the small details, awesome job all the way around, she is looking amazing. Can't wait to see what she does on the dyno.
That came out amazing. Can’t wait to see the car when you do the full paint correction. I have a SB terminator also and she needs some love in the detail/paint correction department to, she’s a good 5 footer 😂. Hope you keep this one it’s just to pretty to sell!
Man bro watching all the videos of you working on the car an all the attention to detail that u see is great I can not wait to hear this beast on the dyno I wanna hear that engine open up
Your content is great, I’ve said it many times, and I’ll always say it. Also you’ve come far 62k already ?! Congrats man! Keep up the great work 100k easily reachable by end of 2024 no doubt
I have to hand it to you with all your vehicles -- you're always thorough and take care of every little detail that needs addressing. All those details come together in the end and make for a huge difference and completely transform the car into a clean and well sorted example. Keep up the great content brotha!
Great content Chris, very excited to see this car finished with a final break down. Prob even more excited to see the next project. Keep em coming. Thanks.
After the sonic blue got sprayed, before the clear coat made me realize sonic blue with a satin clear would be an amazing color tone for a future project on my cobra.
Awesome! I've been waiting to see the paint correction! Man I Haye tok see the end if the content! Now im.on pins and needles waiting..til the next episode!
Yes! It is crazy how pumped I get when I see a new video from the king of the Cobro's. Chris has inspired my own builds so much. I got off my butt and started humping on my projects. Follow this guys lead, his method is lean and meticulous. I got a marker board etc. I work in LEAN and Toyota methods but never had applied them to my own garage. THANK YOU CHRIS. You absolutely kill your projects and have provided so much info and inspiration to so many of us. I always appreciate your content and attention to detail. The small things are really what takes your stuff all the way to a different level. You da man. I'm heading to Fla to attempt to drive another project car home Tuesday. Keep it coming brother, we love you and the channel.
@@ChrisSullivan69 picking up another fox body in Eustis, flying into sanford/orlando Tuesday. Attempting to drive it back 23 hours to Wisconsin. Let's roll!
Really cool to see how far this Cobra has come. Glad it found a good home. These are a national treasure. I really hope to have my own someday, always been my dream muscle car. I had a 2004 GT as my daily years ago but had to sell it because... They don't do snow.
For your next project... pour a slope at your garage door so you don't scrape. I have the same issue at my shop... I didn't fix it either. lol! 2x6's for the win!
Chris..what i like about you..is for sure the kick ass vehicles..and the style..no shouting..no drama..no click bait..and your eye for detail..surely deserve so many more subs.views...
Agreed! How I am trying to structure my videos...
I laughed so hard when you panned out from the fully installed bumper onto that lonely bumper support. Thought I was the only one that did stuff like that
Amateur move
I mean this cobra is brand spanking new!!!💪🏿 not to mention that beautiful c8 and camaro in the background 🏆
Every other "flipper/builder/youtuber" needs to watch your videos and take lessons... I mean, I would have done it to my own car for sure but you went so far as to clean the dirt from behind the rear bumper cover when all it needed was a clutch!!! That's next level attention to detail my man. Seriously though, LOVE your videos, keep doing exactly what you're doing.
Thanks man
This series is so kickass.
I'm slowly getting my Cobra cleaned up and your attention to detail has really shown me how to go that extra step to make the car really stand out.
Thanks man
Loving the last few series on Cobra content. They are iconic and hard to believe some of them are beat to hell like this 1 was.
I think it’s great you don’t edit out the little mistakes like forgetting the foam in the bumper. It’s shit we all do haha. Great progress on the ole girl!
🤙🤙
Ben has a gift man. Beautiful job, fellas. He's so focused on the spray, he doesn't even blink. 100% focus and effort.
Best channel on TH-cam right now hands down no questions asked
Paint is one hell of a skill, shout to Ben for doing that right, looks amazing.
There is no way I would've been able to resist scuffing and clearing the entire car. Lol, I appreciate your self control.
I was thinking the same, but I’m guessing that’s a whole lot more time! Lol
He would have if the original clear was beyond the point of saving. With the right product, the right equipment, and the right technique you wouldnt be able to tell the difference in the new clear vs the old especially after some quality cermic coating!
@@zachniverson8816 100%. But who doesn’t want more mils to sand the orange peel out of! Think about how perfect defect free the paint can be! It’s what dreams are made of! Lol
@@brian2359 theres obviuosly plenty on the qr to take the orange peel out and to match the depth of the factory clear which also WILL NOT have any orange peel once done and again i reiterate that the clear was obviuosly thick enough mil wise to justify spraying the whole car. Also if it had any orange peel (which it did not) he would have because he is obviuosly meticulous.
It's amazing what a little sanding will show thru the clear. I do bodywork myself. So I know u may have a car that looks good. Till u start sanding
Getting my own Cobra hopefully next weekend and have been binging this series to know what to look for and if I need to fix anything on it. These are awesome videos for sure! Best cobra content on YT!
You’ll love it! I just bought my first Cobra few weeks ago
Driving to (hopefully) get a silver 04 coupe next weekend! I can’t wait, Terminators have been my dream car for 6-7 years now.
Congrats man you will love it! I’ve had mine since 2004 and it’s still a blast.
@@christianfrye look for repair evidence on the core support. almost all these cars have lived long hard lives. Even cars that run are clapped out, like this one. Be careful out there. Its ok to fall in love with a POS, just don’t pay a ton for a POS. Its easy to put $30k into a $20k car
Appreciate it! Car has a clean and accident free carfax, obviously that’s not a 100% guarantee but that helps a little bit!
I had a Sonic Blue 2003 in 2010, 28K mile one owner, for $14K. Crazy how expensive they've become. Keep this one Chris, these blues are special and it matches your new Z06.. I've watched all of your videos, great motivation to work on my 98 cobra, like my former Termi it only has bolt-ons and low mileage. One of the very few car channels I can watch, most have annoying intros, rap music and yelling. Congrats on the success. Looking forward to seeing your blue Termi get a paint correction
Oh and I know it takes forever to edit what you feel is already a long video but trust me the process of showing each step of what you do is appreciated by surely everyone. The entire process of removing the subframe and then assembling the Teksid engine was a great example of it.
Ben good people! Anyone that would take there time like he does to help out,is what you call real friends for life!
He definitely is!
It's cool to see someone who is a master of their craft. Way to go Ben!!
Ben is the man
Babe wake up, Chris just dropped another banger! I wish I could buy this damn car!
Looks great, my OCD had been patiently waiting for the buff job since day 1 haha
Corvette and Cobra videos damn near back to back I like it 👌
Aw man, I felt your pain when you looked over and that bumper insert was just lying there on the ground mocking you...we've all been there, lol...but not all of us suck it up and do the right thing....RESPECT!
Wow the back end looks brand new Chris! Awesome how you upgrade the cars that you restore back to value and satisfaction. Looking forward to seeing how it looks once you complete the paint correction effort!!! The wheels really make the blue stand out. The previous black wheels did not accomplish that at all!!!
Great job Chris!!!!!
Cheers‼️👍👊💪😎🇺🇸
Reminder: Get the Isolator for the Mustang!!!!! Love your channel! I can't wait to see more of truck content
I binge watched these start to finish the past couple days. Can’t wait for the next episode.
THANK YOU, for finaalllly removing that 1320 sticker!
Lol my pleasure
Amazing transformation for a car that 'just' needed a clutch. I'll say it again, love that color blue from Ford.
Another excellent repair. I can’t wait to see it again after the correction. It doesn’t look bad but it will be a true gem after it. 👍👍👍👍👍
Definitely!
It’s the front coil springs again! You always have extra parts! Great job on the paint!
thank you for recording footage inside the paint booth, great video addition to the series - also great advertisement for Ben's work!
That's such a nice blue. I just did an order with Rock Auto and I put you down as where I heard about them from. So expect to finally get sponsored by them and get rich. You're welcome. lol Nah, but I did put your channel down when I made the order. You are right, they are pretty awesome and faster shipping than what I selected too. Thank you sir and keep up the awesome videos!
Awesome! Thanks
Chris needs merch
“I learned about ROCKAUTO from Chris Sullivan and all he got was a cease and desist for this T shirt”
GREAT JOB AGAIN CHRIS !! 1000% TRANSFORMATION !! GIVE A THUMBS UP TO BEN YOUR PAINT FRIEND !! ALOT OF HARD WORK GOES INTO PAINT & BODY WORK ,EVEN FOR A LITTLE FEW SCRATCHES ,GREAT BLEND JOB !!! KEEP THEM VIDEOS COMING !! JESSE VIA LAS VEGAS
Can you be honest... If you didn't do TH-cam would you go this in depth with these cars when you're just flipping them? Because man, you are insane with the level of quality you put into these cars
He's pretty much always been this way. Even before his videos took off.
I'm not on TH-cam and this is the way I've always done my cars...even the ones I bought with the intentions of making a quick flip get the full treatment. There are people out there that do it the right way...we're just few and far between unfortunately.
Been doing it this way long before youtube. My way of doing things won't allow it any other way
@@ChrisSullivan69 Chris saves dying cars and gives them another chance at life! What a guy 💪🏾😎
Chris when you do the paint correction, will you please do an extended version with explanation of your process start to finish including the products you are using. I follow your channel and love all the vids and would really appreciate a full video tutorial on how you correct and detail Paint 👍
Will do!
Chris you are great with everything you do with cars. You would make an amazing teacher.
Absolutely love this channel. I love the detail, the music, the humor, even when a mistake is made, all the thorough detail. This is absolutely one of the best channels on TH-cam by far.
I knew that Marylou's right away. Biondi's does great work. They fixed a couple rust spots on my mustangs doors several years back. The car is turning out awesome, body work is the worst part of any project. (For me at least lol). Nice job Chris
Top job as always Chris, love the Cobra series 👍shout out to Ben👊
Thank you for making videos. I really enjoy watching these!
Thanks for watching!
@@ChrisSullivan69 I completely agree that the paint correction is going to be a satisfying one. I'm looking forward to that!
That foam bumper reminded me of when you forgot to put the spring on the shock in a earlier video.
Had to take everything back apart. Man that has to suck.
CAN'T WAIT FOR THE DYNO!!!
God I miss Marylou’s coffee. Thanks Chris for the reminder
Once it your lips it's so good
Ben has very good depth perception and steady arm motion
You guys are doing it again. Making body work look SOOO easy. It is def not. Great work. Can't wait to see the full cut/buff video on this one.
🤙🤙
Looking forward to the dyno episode Chris!!
Now we just need a POV video of you driving it around after its complete!
Looking good Chris! Love the sonic blue paint. The expression on your face made me laugh when you forgot the foam for the bumper. Been there done that...
Love your attention to detail and how relatable all your videos are! I had to laugh at the bumper foam fiasco, we've all been there and for you to show that and not skip past it, or pretend it didn't happen, is the reason I subscribed and make sure to "like" all your videos. Thanks Chris, you keep making these videos and we'll keep watching!
Gotta share the blunders when I can lol
Timing is everything… popped on TH-cam to check something and this pops up… have to watch it now… my meeting can wait haha!
Let's go!
Same thing! I forget which video actually popped up though but I started binging the whole series. Plus the yellow cobra series.
It's nice to see the attention to detail someone else takes as I would.
Makes me want to make a series on my 03 gt 🤔.
Ready to see that C6 back out … probably my fav that you have rn shits a BEAST 😂🔥
Man this car has came such a long way. It’s beautiful and you’ve done a great job man. Keep it up, loving the videos! Looking forward to some more!!
Love seeing the progress of this build. It's so nice to know a good body man, they're hard to find these days
I’ve been looking forward to this episode knowing how good you are at paint correction. Having that quarter and bumper painted the car will look like new. Have a nice Easter weekend with your family. CU on the next one 😁👋🏻
Bruh... dont'chu dare sell this beauty.
Seeing your videos reminds me of my 2003 Cobra. They're such awesome cars.
They are!
Perfection, takes time, patience and experience!
You got that right!
I’m no painter but Ben seems to be a master at his craft.
Looks Awesome Chris!!! 👍🏻👍🏻
I feel your pain about the bumper foam M8!
Wow dudes got skills damn that came out nice
He sure does!
Hey Chris, hope all is well. Can’t believe just how well the new paint blends…the Cobra is looking better with each upload, and the finish line is finally approaching - we’re all excited to see the final results! Thanks again for another therapeutic, and informative upload my brother. Until the next one✌🏼
Very nice job. I like seen the Cobra but I prefer to see the fixed E63 🤞🏼🍀.
13 seconds into the video and already saying, this is sick, good job, post more, your channel is top tier! God bless!!
Great vid as always Chris. Good to see the Cobra coming together so you can get rid of it and get to the next project…that was a joke
Marylou’s is a staple for sure, hope to see this and the other cars at some north shore/southern NH shows this season
Hey Chris, the car looks great ! You do good work, if I were you would keep that thing it is beautiful & goig up in value. Great video, keep'em coming 🇺🇸
Always waiting on the notifications from the channel.
Add tint to your list!
Looks awesome! I've been wanting to do paint correction before you pulled the motor! Love shiny Sonic Blue 💙
Wow that was one hell of a paint job, Ben is a master, what a awesome blending the color, wow he has the talent,
and you have the eye for the small details, awesome job all the way around, she is looking amazing. Can't wait
to see what she does on the dyno.
Amazing job as always bro , you’re channel is so under rated . Deserves way more subs and views.
Your buddy Ben is a talented body/paint man. The color match and mirror finish on that rear panel proves it!
Sure is!
What a timing! Just finished installing my new custom steering wheel and BOOM!! New video from you! This must be my lucky day!
🤝
That came out amazing. Can’t wait to see the car when you do the full paint correction. I have a SB terminator also and she needs some love in the detail/paint correction department to, she’s a good 5 footer 😂. Hope you keep this one it’s just to pretty to sell!
Another great part to this story.
Seeing the quarter and bumper lets you know how good the rest of the paint will look after correction.
Man bro watching all the videos of you working on the car an all the attention to detail that u see is great I can not wait to hear this beast on the dyno I wanna hear that engine open up
I appreciate that
great start to my morning!
Your content is great, I’ve said it many times, and I’ll always say it. Also you’ve come far 62k already ?! Congrats man! Keep up the great work 100k easily reachable by end of 2024 no doubt
Let's hope so!
What a nice treat to receive this post on Good Friday! Great vid as always Chris. Cheers from Warwickshire, UK
Many thanks!
Great job looks fabulous keep up the great work
I have to hand it to you with all your vehicles -- you're always thorough and take care of every little detail that needs addressing. All those details come together in the end and make for a huge difference and completely transform the car into a clean and well sorted example. Keep up the great content brotha!
Great content Chris, very excited to see this car finished with a final break down. Prob even more excited to see the next project. Keep em coming. Thanks.
Ben did a great job, very much improved. Tell him the camera doesn't bite...too hard
The car looks amazing man ! Truthfully i think you need a set of chrome clear headlights for it over the black , it would pop with the wheels more
Man your Cobra with new paint looks so good! Great job Chris. I look forward to watching your upcoming videos!!
Fantastic job Cobra is amazing looking
Thanks 👍
After the sonic blue got sprayed, before the clear coat made me realize sonic blue with a satin clear would be an amazing color tone for a future project on my cobra.
Can’t wait to see the next couple videos on this car!
Should be quite the transformation!
I love what you done to the car and one of my favorite color and great choices on the rims
Glad you like it!
I’m a ford guy and mustang guy can’t wait to get me one
I love how one day in the body shop upped your rattle can game with pro mask tape etc 😂
Awesome! I've been waiting to see the paint correction! Man I Haye tok see the end if the content! Now im.on pins and needles waiting..til the next episode!
Always great keep them coming
Yes! It is crazy how pumped I get when I see a new video from the king of the Cobro's. Chris has inspired my own builds so much. I got off my butt and started humping on my projects. Follow this guys lead, his method is lean and meticulous. I got a marker board etc. I work in LEAN and Toyota methods but never had applied them to my own garage. THANK YOU CHRIS. You absolutely kill your projects and have provided so much info and inspiration to so many of us. I always appreciate your content and attention to detail. The small things are really what takes your stuff all the way to a different level. You da man. I'm heading to Fla to attempt to drive another project car home Tuesday. Keep it coming brother, we love you and the channel.
See ya down there 👀
@@ChrisSullivan69 picking up another fox body in Eustis, flying into sanford/orlando Tuesday. Attempting to drive it back 23 hours to Wisconsin. Let's roll!
Looks great Chris !
The sound of this cobra is amazing!
Really cool to see how far this Cobra has come. Glad it found a good home. These are a national treasure. I really hope to have my own someday, always been my dream muscle car. I had a 2004 GT as my daily years ago but had to sell it because... They don't do snow.
For your next project... pour a slope at your garage door so you don't scrape. I have the same issue at my shop... I didn't fix it either. lol! 2x6's for the win!
24:20 SHIT! I feel your pain. I’m the king of re-work in my garage.
Marylou’s coffee is amazing!
I bought my first 03 Cobra few weeks ago, these cars are amazing!
Chris have to say you do some incredible work! This cobra looks brand new! I can tell you love these mustangs!
My favorite YT channel and I watch car YT channels 3-4 hours per day. Yes I have a problem but first thing is admitting it.
Ain't nothin wrong with that