One more sub closer to 17k 👍 I've watched several of your videos and they are always informative and a great help, along with the humor thrown in 🙃 it's a joy to watch. I've ordered a few things from you in the past but for some reason never subbed your channel, don't know why but my bad 🤦♂️ I did sub this time and rang the bell 😊 Thanks guys and keep em coming!
Just got my Tinyhawk S from you guys last week. This video is going to be a big help setting it up with my T16. I'm a newb so I'm completely lost so any info is a huge help!! A big THANKS to you all!!
Hello its me again can you guys do a video on how to solder and set up an frsky xm plus on the new larva x yhat would be greatly appreciated love ur reviews thanks
Because I'm STILL using my original T8SG(the grey version) and have yet to move to the T16 I've had for months, this is a Great video! The first thing I realized is that I don't have the right kind of data cable. It's not the same one I use for Betaflight and has a larger small type. So, I'm going in search of....
Awesome video guys can't wait for part 2 and 3 seriously considering getting this and we'll be coming from Spectrum will need all the help I can get LOL
So I’m following your instructions but have hot a wall. Using a Jumper T-18 my minimums/maximums won’t let me use a decimal point. Do I use -98% and +98% ?? Thanks for the help in advance
Great Information guys , I’ve got a little problem with my Jumper T16, when I plug it into my computer, running OpenTX companion, I get a error message “USB Device not recognized” any ideas ?
Kelly Caudle I thought that too, but I was using the USB cable supplied by Jumper, the USB Type B mini are hard to find now but I was able replaced it and sure nuff the one supplied was bad.. thanks for the reply
I have been messing with this all night. When I disconnect from the t16 I get "storage warning - Bad radio data" What did I do wrong? It wont save my new model.
Thanks for this video. On my Jumper T16 models, the trims show up with a different unit of measure (us not %).. i.e. -512.0us not 0%. How can I change this? Thanks.
Man, I am so new to this I got the e-max tiny hawk and fell in love with it so I got the jumper T16 and the Taranis X-lite pro not knowing anything about updating, flashing bootloaders, and firmware. I got the XJT external module so I can get to D16 D8 mode to work on the X-lite pro got it to show up but won't bind .now I'm trying to fine-tune the jumper but have no clue on setting things up. can you guys make us a video on how to get things going like how to set up the jumper T16 for dummies . a walkthrough on setting up like switches etc. thanks guys
Hi guys, lots of people say you cant use/its not compatible, Companion with the T16, but you dont have any trouble at all ?? Do you know something they dont ??
D.D. i got my drone set up on the jumper 16 and it all works thank you for all you do and thanks for the call are you going to get more fat-shark attitude 5 i would like to get it from you
Do you need a pack of quads? We have some good deals lol --- > Thanks for the support guys, almost at 17k subs!
One more sub closer to 17k 👍 I've watched several of your videos and they are always informative and a great help, along with the humor thrown in 🙃 it's a joy to watch. I've ordered a few things from you in the past but for some reason never subbed your channel, don't know why but my bad 🤦♂️ I did sub this time and rang the bell 😊 Thanks guys and keep em coming!
Wow, thanks so much for the kind words and thanks for subscribing
@@graysonhobby 👍
2020: 20.000 subscribers. 3k a year. That's not bad at all, congrats!
Just got my Tinyhawk S from you guys last week. This video is going to be a big help setting it up with my T16. I'm a newb so I'm completely lost so any info is a huge help!! A big THANKS to you all!!
Yep 2 days shipping to Mississippi. Awesome. Thank you for your service!
Hello its me again can you guys do a video on how to solder and set up an frsky xm plus on the new larva x yhat would be greatly appreciated love ur reviews thanks
we do not carry the larva,
Why is that u guys carry everything else?
Great video Guys! Really helpful to us crossing over from spectrum and getting to know open tx.Thanks. keep em coming!
Thank You, we have a Spectrum Airplane / Open TX tutorial coming
Because I'm STILL using my original T8SG(the grey version) and have yet to move to the T16 I've had for months, this is a Great video! The first thing I realized is that I don't have the right kind of data cable. It's not the same one I use for Betaflight and has a larger small type. So, I'm going in search of....
Awesome video guys can't wait for part 2 and 3 seriously considering getting this and we'll be coming from Spectrum will need all the help I can get LOL
So I’m following your instructions but have hot a wall. Using a Jumper T-18 my minimums/maximums won’t let me use a decimal point. Do I use -98% and +98% ?? Thanks for the help in advance
DUDE thanks, best video ever. helped so much
Hey are u guys going to do a video on installing open tx on the jumper t16 pro and the throttle warning that comes with open tx for some reason?
Can u reset t18? So i can start from the begining
After writing to the radio I unplug and get a message. Storage warning bad radio data press any key. Then goes into calibration mode. Any ideas?
I have the same issue!
Great Information guys , I’ve got a little problem with my Jumper T16, when I plug it into my computer, running OpenTX companion, I get a error message “USB Device not recognized” any ideas ?
Make sure the USB cable supports data transfer and is not just for charging.
Kelly Caudle I thought that too, but I was using the USB cable supplied by Jumper, the USB Type B mini are hard to find now but I was able replaced it and sure nuff the one supplied was bad.. thanks for the reply
I have been messing with this all night. When I disconnect from the t16 I get "storage warning - Bad radio data" What did I do wrong? It wont save my new model.
Thanks for this video. On my Jumper T16 models, the trims show up with a different unit of measure (us not %).. i.e. -512.0us not 0%. How can I change this? Thanks.
for some reason my t16 model button works like the telemetry buttone and i cant figure it out....PLEASE HELP
Hi I'm prasanna... I'm a bigginer I thing I bought transmitter. My budget is under 10,000 so give u r suggestion which is best of this cost?
I bought Jumper T16 yesterday and there is a key stuck error. there is no solution
Great work on How to setup a drone
thank you
Umm my first radio was is Jumper T8SG V2,are you really using a drop down menu to set switches?im so lost with Open TX
From @7:45 to @8:45... Why did you change all the values from 100 to 97.7? You didn't really explain why you did that.
Man, I am so new to this I got the e-max tiny hawk and fell in love with it so I got the jumper T16 and the Taranis X-lite pro not knowing anything about updating, flashing bootloaders, and firmware. I got the XJT external module so I can get to D16 D8 mode to work on the X-lite pro got it to show up but won't bind .now I'm trying to fine-tune the jumper but have no clue on setting things up. can you guys make us a video on how to get things going like how to set up the jumper T16 for dummies . a walkthrough on setting up like switches etc. thanks guys
Another fantastic video keep it up
Hi guys,I've managed to bind my tinyhawk freestyle to my t16,but when I arm it,nothing happens,any idea's, Tia.
Hi guys, lots of people say you cant use/its not compatible, Companion with the T16, but you dont have any trouble at all ?? Do you know something they dont ??
Did you watch the video?
D.D. i got my drone set up on the jumper 16 and it all works thank you for all you do and thanks for the call are you going to get more fat-shark attitude 5 i would like to get it from you
awesome - glad it worked -
Great work once again,
thank you
Hi, first i introduce myself. im prasanna from India im intersted in rc planes extra uav ... U r video's is use full Thanku guys.🤝
can you guys do a video on How to setup helicopter on with open TX
no one here flies helis - sorry :(
Real helis lol
Gday Basil and Will, great vlog and are you going to do a vlog on fitting the new internal multi module to the t16 transmitter.👍
We will look into it
this is D.D. thank you i think i can set up my drone now
I hope it work with my Jumper T12🤞🤞🤞
THUMBS UP
👍
Thank you.
you dont explain the whats or whys, not a video for a newbie!