Great video! Thanks for the advice on the plugs. I think it is worth the extra effort to remove the cowling in order to get to the rear plugs and while I am there, I replaced the PCV valve (on metal valve covers it screws in and on the plastic valve covers it fits in a grommet that hardens over time).
PCV is something I have sorely neglected, good move on your part! Knowing how to remove the cowling helps in so many other jobs back there, O2 sensor, heater hoses, valve cover gaskets...
Great video I replaced only the wire and not the spark plug and coil before the car was yanking forward engine light came on the highway. Sometimes pulling forward. Something is not ok
You can turn your key 3 times quickly ( without starting the engine) and your error codes will be displayed on the dash, look up the code and it will tell you why the engine light came on. I have a current problem, when maintaining a steady speed I feel small jerks and was afraid it was the torque converter. It now happens when accelerating etc now, but still no codes. More likely an engine misfire, likely cause: ignition coil pack. I ordered a new one and it is due to show up tomorrow and I will make a video, hopefully it solves the problem. This guy shows you how to display the codes.: th-cam.com/video/vyJdY4pIwB0/w-d-xo.html
My opinion you don't show how to remove the filter air and explain how you take off the wires one at the time and put it in one at the time also to explain to beginners so as not to make mistake
Actually I do at the end of the video and I provided links to my other video showing how to disassemble the windshield wiper assembly for easier access. th-cam.com/video/h6YBFV3pU1I/w-d-xo.html
My miny van 2008 put new cable apart plug still do saint problem got to work stared put drive got like 15 or 20 minutes stared like no power stop running with power put pedal do no want run take pedal out put back stared run-in again do like no power little be power motor coming back any body can let me know got saint problem o whatt can be the problem thank
Great video! Thanks for the advice on the plugs. I think it is worth the extra effort to remove the cowling in order to get to the rear plugs and while I am there, I replaced the PCV valve (on metal valve covers it screws in and on the plastic valve covers it fits in a grommet that hardens over time).
PCV is something I have sorely neglected, good move on your part! Knowing how to remove the cowling helps in so many other jobs back there, O2 sensor, heater hoses, valve cover gaskets...
Great video I replaced only the wire and not the spark plug and coil before the car was yanking forward engine light came on the highway. Sometimes pulling forward. Something is not ok
You can turn your key 3 times quickly ( without starting the engine) and your error codes will be displayed on the dash, look up the code and it will tell you why the engine light came on.
I have a current problem, when maintaining a steady speed I feel small jerks and was afraid it was the torque converter. It now happens when accelerating etc now, but still no codes. More likely an engine misfire, likely cause: ignition coil pack. I ordered a new one and it is due to show up tomorrow and I will make a video, hopefully it solves the problem. This guy shows you how to display the codes.: th-cam.com/video/vyJdY4pIwB0/w-d-xo.html
@@DIYBenzGarage ok my friend thank you much g blessings you
Thank you sir.
My opinion you don't show how to remove the filter air and explain how you take off the wires one at the time and put it in one at the time also to explain to beginners so as not to make mistake
Great video…very detailed but you don’t show show how to get to the rear plugs 🤔
Actually I do at the end of the video and I provided links to my other video showing how to disassemble the windshield wiper assembly for easier access. th-cam.com/video/h6YBFV3pU1I/w-d-xo.html
❤.❤.❤.❤.❤
My miny van 2008 put new cable apart plug still do saint problem got to work stared put drive got like 15 or 20 minutes stared like no power stop running with power put pedal do no want run take pedal out put back stared run-in again do like no power little be power motor coming back any body can let me know got saint problem o whatt can be the problem thank
I am not familiar with the 2008, that is a Fiat built motor if I am not mistaken, completely different.