There ‘s a balance to be struck here. As much a I love my element, my expectations have to be realistic. It will not live forever. My 19 year old 2003 with 325 000 km wasn’t really worth spending OEM prices on, so I opted for Beck/Arnley mounts from RockAuto. Aftermarket, but a “upmarket” brand. A year later and they do seem firmer than factory, but I have no real complaints or regrets about installing them.
Same. My civic is an 09 and the motor mount is 250. My pockets… I also his swap axles. Arm controls. Bearings likely need to be changed. Spark plugs are starting to give out… rear struts should be swapped… grrrr
I have an ‘07 Civic with 130k miles. Bought it two years ago and the first thing I did was replace the mounts, well not me but my then mechanic. That was in April of 2021. It is now December of 2023 and I’m with a new mechanic now having to replace the mounts again. From this experience I don’t think I’ll ever do aftermarket again. I think the price of OEM parts and the peace of mind it brings that they will function for a longer duration is better than having to worry about replacing mounts every 1-2 years. My mounts started giving out last year as my car got louder and vibration increased. The way I see it if you plan of having the car a for a while it’s better to do OEM than having to replace these parts 1-2 years because ultimately it’ll add up. What’s the difference of paying $600 for 5-6 years and paying $150 every 1-2 years
Recently picked up an 04 Element with 164k on the odo. Bought it knowing it needed A LOT of work. Long story short, my budget wasn't in the realm of OEM parts. I rolled the dice and bought the TRQ branded parts from 1A auto. Hopefully they last, but now I know how to change all those parts out LOL. 4 strut assemblies 4 sway bar links Engine mounts Alternator Power Steering pump Power steering reservoir hose (oem) 4 new tires and alignment. Been my daily for a month now and I love that Element. :D
I recently got a 2010 Accord Lx n it needs mad work. Yesterday my castle nut came completely off the lower control arm n I was stuck in a Walmart for hours. The fuckin wheel was basically off, ripped the CV axel out, n maybe bent my sway bar. I keep seeing TRQ pop up for the parts I need. I would love to fix up everything with oem parts but I’m a broke ass college student. Have you had any problems with the TRQ parts n would you recommend em ? Also how’s the car holding up ?
I have an unpopular opinion on this one from a DIYer like myself. I don't mind paying a fraction of the price and will be fully happy having it last me 2 years. I don't mind doing a job two years down the line. At that point I feel like I got my money's worth. Besides, what fun will it be if you never get to Work on your car? Having a car is an experience and working on it is part of the journey.
Disagree, I enjoy driving my cars, not leaving them down for the count because I could’ve done the job right the first time. Imagine doing a surgery twice because you wanted to cheap out on your surgeon. What are you even talking about smh
Excluding life value, the difference could be in the response curve to applied torque. You could get a rougher ride due to more force transmission between the engine and the frame. The Duralast parts, similar to many aftermarket motor mounts, have thicker and stiffer elastomer dampeners. Stiffer shocks mean more bumps. The value is the right dampening plus life of the part.
is not just how much longer the oem part will last but the felling of the car will be different - After market transfer the vibrations of the engine to the cabin
Honda OEM parts last longer, don’t want to use cheap parts and have to replace them again later. I have an 04 that I bought new and replaced my motor mounts about 3 years ago. Aftermarket are ok if you are looking to get rid of the car. Tip, you may want to consider using a scale to weigh parts.
Honda parts now is great and I never have a problem with them. I would go with Honda OEM vs the Duralast for motormounts. Lots of engineering goes into a motor mount. Not a place to skimp.
Do they actually sell real honda parts? at HondaPartsNow? I got a "genuine" key from them and the one I got @full OEM price feels like absolute junk. Rough edges, different button feel, Thinner plastic/ worse feeling texture. It came in what looks like a genuine honda package but looks/feels much different than the original key
For want is wroth, I have 2 pilots, one I bought new and the other one I bought used. When it was time to replace the motor and trans mounts I bought OEM parts from the dealer and it cost me an arm and a leg! On my used one I bought my parts from the internet, and they were way cheaper. Fast forward… a replaced the OEM at 6 years, and aftermarket at 4.5 years. I spent about $750 at the dealer and $220 at parts geek. On the OEM, I started to noticed the wear at about 4-5th year of use. Aftermarket, after 2-3 years. In my opinion, if you doing the work, buy quality aftermarket that have warranty. You will save some goodg gas money. But if you taking your cars to the shop and paying labor, buy OEM.
I've owned Hondas and Acuras throughout the years and currently do I learned my lesson many years ago not to use aftermarket motor mounts on a Honda even though AutoZone does offer a lifetime warranty you'll be paying the labor cost all over again or if you do it yourself the labor the hassle of reinstalling aftermarket replacement motor mounts when you buy a Honda OEM is the one-time job and that's it I'm in California too but I purchased from Honda factory parts no taxes and their parts are cheaper than Honda parts now .
There’s some aftermarket parts you can use and are just as good as the OEM on Honda Acura. Aisin water pump & timing kits; Kyb struts, Wix oil filter and Akebono brakes.
@@wasabitoburrion4409 literally most of the companies you mentioned produce the parts for Honda ,aisin timing belt kit is decent because it uses mostly OEM parts like koyo timing belt idler pulleys however their water pumps have been known to have quality issues yamada OEM water pumps are the best hands down
I have a 2007 Honda Accord the aftermarket mount look pretty much the same as The OEM. So the first time I went the cheapest way I started my car and had vibration. I had to put the OEM mounts in and fix the problem but a big difference of price
I think its the quality and density of the rubber. When I think about it, a good chunk of car maintenance is just replacing some sort of rubber that has worn down. Whether it be a gasket or a bushing or a dampener of some sort. The quality of the rubber is of paramount importance and you can bet that the Japanese feel this way
Used duralast on the rear mount for a 2010 Corolla and brought way to much engine vibration to the cabin. Worst than the original being replaced. Got burned on this one. Will be ordering OEM. Never again when it comes to engine mounts.
I've been thru too many aftermarket motor mounts, pure garbage (97 Accord). OEM are hard to find and if you do they are overpriced. I was lucky to find the front mounts on Ebay ($20 for original Honda) so I grabbed two. I have to do the rear, again, and I'm dreading it; can't find original (it's 12/2023). I hear Anchor isn't that good but BECK/ARNLEY may be better...HELP!!!
if you have extra rubber ears from the old top mount I'd use them on that aftermarket lower front... I should have but spaced out... but yeah the top one hardly needs it and the bottom needs those rubber buffers... since it doesnt have them the lil ears might work...
I made the mistake of going duralast per price, I regret that decision. Now, I have to return and get store credit and still get Honda parts for my Civic. Advise: Always spend the right amount for the right value and get the HONDA parts!!
The siphirical cemetric tightness in the OEM is way better years and years better and tight. A after market engine mount is loose as after market ball joints and tie rods . . Like engine oil at AutoZone on the shelf it's all aftermarket. No car dealership used AutoZone oil or cheap mounts. But the main mount needs to be OEM the rest can be aftermarket. It has a ball joint inside it.. that other mount your looking at is just plastic that they didn't cut out . It isn't part of the mount
Brother, no car maker makes their own oil. They get a fluid from the oil company and brand it themselves. You'd be surprised to learn that every dealership uses "aftermarket" engine oil. It's all aftermarket, just like parts all come from a different company but get the car logo on the box.
How have they been holding up? I’ve purchased CV axles from them for my ‘16 Civic and the fit was immaculate! They drive really well too! Hopefully they hold up but the quality seems like it’s there
genuine OEM japanese auto part made in USA WTF!!!!!!! for me genuine OEM auto parts will be for domestic cars fords, chevy or dodge its like genuine texas person born in CHINA, LOL have a nice day guys, good video by the way....
Does anyone hear him saying assembled in USA not made, just because is says assembled in the USA doesn’t mean it’s made in the USA. It’s made overseas and assembled here and put inside oem packages
Hi can I drive with a motor mount that makes clunking noise it's a aftermarket mount that Honda install because oem motor mount was backorder. Was confirm by a Honda technician thats if fact the aftermarket mount that was install. Bought a oem motor mount on ebay and want to install it to see if it fixes the noise. It's for a 2012 civic lx sedan
Yes took it to a Honda dealership for diagnosis and they told me it's the passenger side motor mount the aftermarket mount that's making the noise . Order the oem because it's backordered thru Honda.
If you change the mount you should feel less vibrations and there will be less stress on the engine bay components. I would save some cash, order the part from hondapartsnow.com and take it to a local shop that doesnt charge much. Do not go to the dealer or you will spend way way way too much money
Oh OK because it makes the noise intermittent. when I went to pick up my car was told that I could drive but would hear the noise . Also when I shift gear the engine doesn't move
@@ZacVaperIt can be proven that you are deliberately lying, or naive? Although I myself prefer OEM parts but some aftermarkets are very good. So you cant say all are bad.
Im on my 3rd engine mount on 10 civic they dont last a month keeps collapsing and car vibrates i purchased fom oreilly lifetime guarantees any idea why they just dont work?the other mounts are good just the passenger large mount . is it cheap mounts thats why they collapse?any good mounts out there other than oem or should i just get oem?
I think its the quality and density of the rubber. The japanese companies are built on solid principles and probably have relationships with suppliers that go way back. The chinese stuff is just to make a quick buck using the most cost effective raw materials
You did not do your research for this video; the thing to check is do the aftermarket mounts, with harder material, vibrate and damage the vehicle vs the softer rubber in an OEM part, or a part direct from the manufacturer. The debate regarding changing your mounts is based on the fact that they use a new, hard material for mounts nowadays that causes intense vibrations; this is why some people recommend you go to the junkyard and get a mount off one of those cars instead of buying new; that mount came from the factory and has the old, good rubber material. What you did in this video is irrelevant to the topic of the video; mounts= vibrations; a visual inspection doesn't matter.
There ‘s a balance to be struck here.
As much a I love my element, my expectations have to be realistic. It will not live forever.
My 19 year old 2003 with 325 000 km wasn’t really worth spending OEM prices on, so I opted for Beck/Arnley mounts from RockAuto. Aftermarket, but a “upmarket” brand.
A year later and they do seem firmer than factory, but I have no real complaints or regrets about installing them.
Same. My civic is an 09 and the motor mount is 250. My pockets… I also his swap axles. Arm controls. Bearings likely need to be changed. Spark plugs are starting to give out… rear struts should be swapped… grrrr
were you able to find the passenger side motor mount in beck arnley. i cant seem to find it. i can only source the front rear and transmission mount.
Well put together video and very helpful. Appreciate the information and the link to OEM Honda parts. Great presentation Thank you
I have an ‘07 Civic with 130k miles. Bought it two years ago and the first thing I did was replace the mounts, well not me but my then mechanic. That was in April of 2021. It is now December of 2023 and I’m with a new mechanic now having to replace the mounts again. From this experience I don’t think I’ll ever do aftermarket again. I think the price of OEM parts and the peace of mind it brings that they will function for a longer duration is better than having to worry about replacing mounts every 1-2 years. My mounts started giving out last year as my car got louder and vibration increased. The way I see it if you plan of having the car a for a while it’s better to do OEM than having to replace these parts 1-2 years because ultimately it’ll add up. What’s the difference of paying $600 for 5-6 years and paying $150 every 1-2 years
Recently picked up an 04 Element with 164k on the odo. Bought it knowing it needed A LOT of work. Long story short, my budget wasn't in the realm of OEM parts. I rolled the dice and bought the TRQ branded parts from 1A auto. Hopefully they last, but now I know how to change all those parts out LOL.
4 strut assemblies
4 sway bar links
Engine mounts
Alternator
Power Steering pump
Power steering reservoir hose (oem)
4 new tires and alignment.
Been my daily for a month now and I love that Element. :D
I recently got a 2010 Accord Lx n it needs mad work. Yesterday my castle nut came completely off the lower control arm n I was stuck in a Walmart for hours. The fuckin wheel was basically off, ripped the CV axel out, n maybe bent my sway bar. I keep seeing TRQ pop up for the parts I need. I would love to fix up everything with oem parts but I’m a broke ass college student. Have you had any problems with the TRQ parts n would you recommend em ? Also how’s the car holding up ?
@@creamyb03 been 3 months without any issues. Ride quality isn’t the same as OEM suspension parts, but for the price, I cannot complain.
I have an unpopular opinion on this one from a DIYer like myself. I don't mind paying a fraction of the price and will be fully happy having it last me 2 years. I don't mind doing a job two years down the line. At that point I feel like I got my money's worth. Besides, what fun will it be if you never get to Work on your car? Having a car is an experience and working on it is part of the journey.
Disagree, I enjoy driving my cars, not leaving them down for the count because I could’ve done the job right the first time. Imagine doing a surgery twice because you wanted to cheap out on your surgeon. What are you even talking about smh
Exacto, ademas autozone da garantias de por vida. Asi que es solo trabajar en el auto 👍
@@shehabossman2738this wins.
Excluding life value, the difference could be in the response curve to applied torque. You could get a rougher ride due to more force transmission between the engine and the frame. The Duralast parts, similar to many aftermarket motor mounts, have thicker and stiffer elastomer dampeners. Stiffer shocks mean more bumps. The value is the right dampening plus life of the part.
is not just how much longer the oem part will last but the felling of the car will be different - After market transfer the vibrations of the engine to the cabin
Honda OEM parts last longer, don’t want to use cheap parts and have to replace them again later. I have an 04 that I bought new and replaced my motor mounts about 3 years ago. Aftermarket are ok if you are looking to get rid of the car. Tip, you may want to consider using a scale to weigh parts.
Honda parts now is great and I never have a problem with them. I would go with Honda OEM vs the Duralast for motormounts. Lots of engineering goes into a motor mount. Not a place to skimp.
I’m debating myself. But do I want to spend $250 on a car that’s 13 years old? Probably not. But Honda parts now does have some great parts.
Do they actually sell real honda parts? at HondaPartsNow? I got a "genuine" key from them and the one I got @full OEM price feels like absolute junk. Rough edges, different button feel, Thinner plastic/ worse feeling texture. It came in what looks like a genuine honda package but looks/feels much different than the original key
@@lemoncarrot7068 everything I have gotten from them is genuine OEM Honda
For want is wroth,
I have 2 pilots, one I bought new and the other one I bought used.
When it was time to replace the motor and trans mounts I bought OEM parts from the dealer and it cost me an arm and a leg!
On my used one I bought my parts from the internet, and they were way cheaper.
Fast forward… a replaced the OEM at 6 years, and aftermarket at 4.5 years.
I spent about $750 at the dealer and
$220 at parts geek.
On the OEM, I started to noticed the wear at about 4-5th year of use.
Aftermarket, after 2-3 years.
In my opinion, if you doing the work, buy quality aftermarket that have warranty. You will save some goodg gas money.
But if you taking your cars to the shop and paying labor, buy OEM.
I've owned Hondas and Acuras throughout the years and currently do I learned my lesson many years ago not to use aftermarket motor mounts on a Honda even though AutoZone does offer a lifetime warranty you'll be paying the labor cost all over again or if you do it yourself the labor the hassle of reinstalling aftermarket replacement motor mounts when you buy a Honda OEM is the one-time job and that's it I'm in California too but I purchased from Honda factory parts no taxes and their parts are cheaper than Honda parts now .
There’s some aftermarket parts you can use and are just as good as the OEM on Honda Acura. Aisin water pump & timing kits; Kyb struts, Wix oil filter and Akebono brakes.
@@wasabitoburrion4409 literally most of the companies you mentioned produce the parts for Honda ,aisin timing belt kit is decent because it uses mostly OEM parts like koyo timing belt idler pulleys however their water pumps have been known to have quality issues yamada OEM water pumps are the best hands down
what about for discontinued parts ???
the quality looks banging
I have a 2007 Honda Accord the aftermarket mount look pretty much the same as The OEM. So the first time I went the cheapest way I started my car and had vibration. I had to put the OEM mounts in and fix the problem but a big difference of price
I think its the quality and density of the rubber. When I think about it, a good chunk of car maintenance is just replacing some sort of rubber that has worn down. Whether it be a gasket or a bushing or a dampener of some sort. The quality of the rubber is of paramount importance and you can bet that the Japanese feel this way
Used duralast on the rear mount for a 2010 Corolla and brought way to much engine vibration to the cabin. Worst than the original being replaced. Got burned on this one. Will be ordering OEM. Never again when it comes to engine mounts.
Online reviews can be helpful as well. I see the Duralast was 3 stars. I'd read that before taking a chance.
Keep it Honda 👍
I've been thru too many aftermarket motor mounts, pure garbage (97 Accord). OEM are hard to find and if you do they are overpriced. I was lucky to find the front mounts on Ebay ($20 for original Honda) so I grabbed two. I have to do the rear, again, and I'm dreading it; can't find original (it's 12/2023). I hear Anchor isn't that good but BECK/ARNLEY may be better...HELP!!!
The joys of owning decades old cars
Paint the rubber of those aftermarket’s with some shin-etsu silicone grease
if you have extra rubber ears from the old top mount I'd use them on that aftermarket lower front... I should have but spaced out... but yeah the top one hardly needs it and the bottom needs those rubber buffers... since it doesnt have them the lil ears might work...
I made the mistake of going duralast per price, I regret that decision. Now, I have to return and get store credit and still get Honda parts for my Civic. Advise: Always spend the right amount for the right value and get the HONDA parts!!
The siphirical cemetric tightness in the OEM is way better years and years better and tight. A after market engine mount is loose as after market ball joints and tie rods . . Like engine oil at AutoZone on the shelf it's all aftermarket. No car dealership used AutoZone oil or cheap mounts. But the main mount needs to be OEM the rest can be aftermarket. It has a ball joint inside it.. that other mount your looking at is just plastic that they didn't cut out . It isn't part of the mount
Brother, no car maker makes their own oil. They get a fluid from the oil company and brand it themselves. You'd be surprised to learn that every dealership uses "aftermarket" engine oil. It's all aftermarket, just like parts all come from a different company but get the car logo on the box.
@@josephfigueroa3527 yeah I've recently been seeing that.
Great video. Thanks. I thought there were 4 motor mounts and that each one was a different part number. Help me please .
I ordered the TRQ ones for my acura. Got too much other maintenance to do on this thing. Hope theyll hold up a couple years and ride ok.
How have they been holding up?
I’ve purchased CV axles from
them for my ‘16 Civic and the fit was immaculate! They drive really well too! Hopefully they hold up but the quality seems like it’s there
all honda part related to rubber using the finest rubber from Malaysia (including produced thru OEM) . . i am not sure the aftermaket product .
may someone know or meet the mounts from Thiland company called GoodRubber ? had a rumor that in there the make quality stuff
genuine OEM japanese auto part made in USA WTF!!!!!!! for me genuine OEM auto parts will be for domestic cars fords, chevy or dodge its like genuine texas person born in CHINA, LOL have a nice day guys, good video by the way....
OEM HONDA!
AutoZone is lifetime part
Has anybody used NAPA?
Can you consider 2nd hand mounts?
Id consider anything OEM thats in better shape than whats currently installed. But gotta keep labor/time/money in mind
Does anyone hear him saying assembled in USA not made, just because is says assembled in the USA doesn’t mean it’s made in the USA. It’s made overseas and assembled here and put inside oem packages
#hondaelement OEM do it once 😎👍
Agree
Thanks……,
It was funny when you said that the metal felt sturdier by hitting it with you knuckles, I could tell you don't know anything about cars
Hi can I drive with a motor mount that makes clunking noise it's a aftermarket mount that Honda install because oem motor mount was backorder. Was confirm by a Honda technician thats if fact the aftermarket mount that was install. Bought a oem motor mount on ebay and want to install it to see if it fixes the noise. It's for a 2012 civic lx sedan
Are you sure its the mount that is making noise? Some are better than others but i would stay away from anything made in China
Yes took it to a Honda dealership for diagnosis and they told me it's the passenger side motor mount the aftermarket mount that's making the noise . Order the oem because it's backordered thru Honda.
What's your advise should I replace it or can I drive with it just the noise with be annoying
If you change the mount you should feel less vibrations and there will be less stress on the engine bay components. I would save some cash, order the part from hondapartsnow.com and take it to a local shop that doesnt charge much. Do not go to the dealer or you will spend way way way too much money
Oh OK because it makes the noise intermittent. when I went to pick up my car was told that I could drive but would hear the noise . Also when I shift gear the engine doesn't move
LOLOLOLOLLO
I’m not sad bro 🫣
Assembled in usa does not mean made in the usa
Jesus. Take your time why don't ya...?
I let Jesus take the wheel
This type of dead, motionless parts only function to support other auto parts, so aftermarket parts are perhaps perfectly ok - an amateur's vuew.
OMG!!!! you are clueless...aftermarket mounts are trash and you'll be redoing them again in 6 months.
@@ZacVaperIt can be proven that you are deliberately lying, or naive? Although I myself prefer OEM parts but some aftermarkets are very good. So you cant say all are bad.
From a mechanic standpoint very terrible review
Im on my 3rd engine mount on 10 civic they dont last a month keeps collapsing and car vibrates i purchased fom oreilly lifetime guarantees any idea why they just dont work?the other mounts are good just the passenger large mount . is it cheap mounts thats why they collapse?any good mounts out there other than oem or should i just get oem?
I think its the quality and density of the rubber. The japanese companies are built on solid principles and probably have relationships with suppliers that go way back. The chinese stuff is just to make a quick buck using the most cost effective raw materials
You did not do your research for this video; the thing to check is do the aftermarket mounts, with harder material, vibrate and damage the vehicle vs the softer rubber in an OEM part, or a part direct from the manufacturer. The debate regarding changing your mounts is based on the fact that they use a new, hard material for mounts nowadays that causes intense vibrations; this is why some people recommend you go to the junkyard and get a mount off one of those cars instead of buying new; that mount came from the factory and has the old, good rubber material. What you did in this video is irrelevant to the topic of the video; mounts= vibrations; a visual inspection doesn't matter.