DIY RGB BASEBOARD TRIM - START TO FINISH - DIFFUSING LED STRIP LIGHTS
ฝัง
- เผยแพร่เมื่อ 16 พ.ย. 2021
- 🚨 AMAZON’s BEST DEALS (Updated Daily): bit.ly/48FGnUv
☑️Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chrismaher
BTF WS2812b Lights: amzn.to/3CtFI91
BTF WS2812b AliExpress: s.click.aliexpress.com/e/_DnB...
Govee Lights I recommend: amzn.to/3BnMgrq
Govee Website: govee.sjv.io/WDYK0O
ESP8266 Board I used to control the lights: amzn.to/3pSfo54
L shaped connectors: amzn.to/3Boc18l
Wood: 1" x 2" x 8' long wood from Home depot. An 8 foot long board cost about $3.50.
Acrylic I recommend: Acrylic: amzn.to/3zyiUCL
Paper Roll: amzn.to/3jzjhIg (less expensive at local stores)
Poster Board: amzn.to/2ZklKQ4 (less expensive at local stores)
Best Diffusers if you didn't want to DIY it:
Spotless Regular LED Diffuser Channel 1m Amazon: amzn.to/47aIujz
Spotless Regular LED Diffuser Channel 2m Amazon: amzn.to/3QoHeDb
5% Discount Code: CHRISMAHER Spotless Regular LED Diffuser Channel 1m or 2m Muzata LED Store: bit.ly/3NHG5Uw
Spotless Corner Diffuser 1m Amazon: amzn.to/3DFhRpf
Spotless Corner Diffuser 2m Amazon: amzn.to/3Krqw2q
5% Off Discount Code: CHRISMAHER Spotless Corner Diffuser 1m or 2m Muzata LED Store: bit.ly/3D3yI4R
How to install WLED on an ESP8266 and control Lights: • How to install WLED on...
How to install WLED on an ESP32 and control Lights: • How To Install WLED on...
How to hook up and control Govee LED Strip lights with WLED: • Control Govee Strip Li...
Link to some of my full DIY LED how-to project videos:
LED Board and Batten Accent Wall: • DIY LED Board and Batt...
LED Baseboard Trim: • DIY RGB BASEBOARD TRIM...
RGB Lamp Hack: • Easy RGB Lamp Hack - A...
Corner LED Light using Pex pipes: • Crazy DIY Light - Comp...
DIY Govee Glide using only paper: • DIY GOVEE GLIDE / LIFX...
Simple Corner LED Project: • Easy DIY Corner Lights...
DIY Customizable Light Up Images: • DIY LED Lightbox - Ful...
LED Strip Diffuser Ideas: • DIY LED STRIP DIFFUSER...
DIY Hexagon Project: • Making My Own Version ...
DIY Edge Lit Designs: • DIY LED Gaming Room Li...
DIY Black Acrylic Floating Shelves: • DIY Nanoleaf - Black L...
LED Tutorials:
Soldering Tutorial: • THE BEST Soldering Tut...
Installing WLED on esp8266: • How to install WLED on...
Power Options for LED Strips: • Power LED Lights + Inj...
Use WLED with Govee Lights: • Control Govee Strip Li...
Re-Use Leftover LED Strips: • Power Leftover LED Str...
Unboxing Videos:
Best Diffuser Channels (same ones used in this video): • NO HOTSPOTS - Best Dif...
Lytmi Neo 2.0: • Amazing TV LED Syncbox...
Govee Lyra Floor Lamp: • Govee Lyra Floor Lamp ...
Govee Glide Hexa Panels: • Govee Glide Hexagon Li...
Govee Glide Light Bars: • Govee Glide Wall Light...
Music:
The song at the end is from my favorite artist Kalax. In my opinion he is the best there is in the Synthwave genre. Make sure to check his music out and support him in any way you can!
Kalax - Fight for Us
• Kalax - Fight for Us
Link to his website: www.iamkalax.com/?fbclid=IwAR...
Link to his TH-cam channel: / kalax
Song: Jarico - Landscape (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video
Song: INOSSI - Runaway
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • INOSSI - Runaway (Vlog...
#Govee #RGB Ideas #LED Diffuser #Kalax #Synthwave #NoCopyrightMusic #VlogMusic #vlognocopyrightmusic
The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!
![Genshin Impact | กาชา Clorinde ไวฟุนั้น ควร C6 [เทสตัวละครต่อ]](http://i.ytimg.com/vi/SOVaBvL7K20/mqdefault.jpg)
🚨 UPDATED DAILY! BEST DEALS on AMAZON: bit.ly/48FGnUv
☑Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chrismaher
BTF WS2812b Lights: amzn.to/3CtFI91
BTF WS2812b AliExpress: s.click.aliexpress.com/e/_DnBQWTD
Govee Lights I recommend: amzn.to/3BnMgrq
Govee Website: govee.sjv.io/WDYK0O
ESP8266 Board I used to control the lights: amzn.to/3pSfo54
L shaped connectors: amzn.to/3Boc18l
Wood: 1" x 2" x 8' long wood from Home depot. An 8 foot long board cost about $3.50.
Acrylic I recommend: Acrylic: amzn.to/3zyiUCL
Paper Roll: amzn.to/3jzjhIg (less expensive at local stores)
Poster Board: amzn.to/2ZklKQ4 (less expensive at local stores)
Best Diffusers if you didn't want to DIY it:
Spotless Regular LED Diffuser Channel 1m Amazon: amzn.to/47aIujz
Spotless Regular LED Diffuser Channel 2m Amazon: amzn.to/3QoHeDb
5% Discount Code: CHRISMAHER Spotless Regular LED Diffuser Channel 1m or 2m Company Site bit.ly/3NHG5Uw
Spotless Corner Diffuser 1m Amazon: amzn.to/3DFhRpf
Spotless Corner Diffuser 2m Amazon: amzn.to/3Krqw2q
5% Off Discount Code: CHRISMAHER Spotless Corner Diffuser 1m or 2m Company Site: bit.ly/3D3yI4R
How to install WLED on an ESP8266 and control Lights: th-cam.com/video/l8OMi7SMpqs/w-d-xo.html
How to install WLED on an ESP32 and control Lights: th-cam.com/video/TOEnFKLm9Sw/w-d-xo.html
How to hook up and control Govee LED Strip lights with WLED: th-cam.com/video/l0sRG1WAbq0/w-d-xo.html
Link to some of my full DIY LED how-to project videos:
LED Board and Batten Accent Wall: th-cam.com/video/b13VLiK7AOU/w-d-xo.html
LED Baseboard Trim: th-cam.com/video/Ik8HnGxfQq0/w-d-xo.html
RGB Lamp Hack: th-cam.com/video/UNPR_98xLQY/w-d-xo.html
Corner LED Light using Pex pipes: th-cam.com/video/rIbTzUD2E4k/w-d-xo.html
DIY Govee Glide using only paper: th-cam.com/video/n9LsiQARFas/w-d-xo.html
Simple Corner LED Project: th-cam.com/video/ZB5HqWhMXNo/w-d-xo.html
DIY Customizable Light Up Images: th-cam.com/video/2q_zrEcbXHE/w-d-xo.html
LED Strip Diffuser Ideas: th-cam.com/video/09-fiWjP42Y/w-d-xo.html
DIY Hexagon Project: th-cam.com/video/t9xGyB4ahyY/w-d-xo.html
DIY Edge Lit Designs: th-cam.com/video/0_TtHkBB3vA/w-d-xo.html
DIY Black Acrylic Floating Shelves: th-cam.com/video/6csSMtV_op0/w-d-xo.html
LED Tutorials:
Soldering Tutorial: th-cam.com/video/apSz3NXYlx8/w-d-xo.html
Installing WLED on esp8266: th-cam.com/video/l8OMi7SMpqs/w-d-xo.html
Power Options for LED Strips: th-cam.com/video/KFtjf5mD6tA/w-d-xo.html
Use WLED with Govee Lights: th-cam.com/video/l0sRG1WAbq0/w-d-xo.html
Re-Use Leftover LED Strips: th-cam.com/video/ASnuk-XDVbI/w-d-xo.html
Unboxing Videos:
Best Diffuser Channels (same ones used in this video): th-cam.com/video/1SKo_HdKVYA/w-d-xo.html
Lytmi Neo 2.0: th-cam.com/video/sth-EdEfSis/w-d-xo.html
Govee Lyra Floor Lamp: th-cam.com/video/NFDYz37ZoXU/w-d-xo.html
Govee Glide Hexa Panels: th-cam.com/video/UDYUvfce4tM/w-d-xo.html
Govee Glide Light Bars: th-cam.com/video/e3jJye-fYoM/w-d-xo.html
Music:
The song at the end is from my favorite artist Kalax. In my opinion he is the best there is in the Synthwave genre. Make sure to check his music out and support him in any way you can!
Kalax - Fight for Us
th-cam.com/video/qvIbL6dAiy8/w-d-xo.html
Link to his website: www.iamkalax.com/?fbclid=IwAR...
Link to his TH-cam channel: th-cam.com/users/Kalax
Song: Jarico - Landscape (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: th-cam.com/video/EwRdKJURDHw/w-d-xo.html
Song: INOSSI - Runaway
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: th-cam.com/video/fIeMo72_bh4/w-d-xo.html
#Govee #RGB Ideas #LED Diffuser #Kalax #Synthwave #NoCopyrightMusic #VlogMusic #vlognocopyrightmusic
The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!
Dang. I gotta say I was skeptical given all the “cheap” routes you took…but colored me RGB’d, the final effect was impressive. I may use this for my theater. Well done and thanks for sharing.
lol thats hilarious! "color me RGB'd" Thanks for watching and taking the time to comment! I'm glad you enjoyed it!
Well considering that even in the professional scene condoms are used as temporary replacement diffusers on huge displays it not a stretch that you can get a nice light setup on the cheap.
Edit: speaking from experience, worked on a display for the Grammies during college. All the broken diffusers were replaced with condoms.
Came just to hoghlight this comment. I completely agree and can’t believe what I just seen..in a good way. Luckily for me I have a 3D printer and a small room to cover lol
LOL SAME
Like others have mentioned, this was definitely "budget", and I was skeptical too when I saw that paper going in as a diffuser as too how good it would actually look, but oh my. This turned out way better than I was expecting
Lol yeah I wasn't sure how the paper was going to look either but it looks great! Could certainly use some acrylic but its a little more expensive and unless you have a big piece, you might see little gaps at the seams! Thanks so much for watching!
This is what the people need!
A lot of other say things are diy and then get the most expensive materials. And this is 100% cleanly reversible.
Thanks so much! I'm glad you liked the video and thanks for taking the time to comment!
Whoa! Chris this is awesome stuff man. Budget friendly and looks incredible. Great job 👊🏼
Thanks so much!! Appreciate you taking the time to comment. Glad you enjoyed it! Thanks again for watching!
pretty impressive results for a low budget build. quite brilliant. I dig it.
Thanks so much! Thanks for the comment. I appreciate it!
I love whenever you come out with new videos! You always do things that are very unique and original but not re-inventing the wheel complicated. Thanks!
Thanks as always buddy! Glad you enjoy the videos! Thanks for watching and taking the time to comment!
This is such a great way to show how if you didn’t see how it was made you would think you had spent easily $200+ on this. Wow. Impressive and this is something that people who rent an apartment or house could utilize without causing damage
Thanks so much! I never though of it but that's a great idea how you can do this without putting holes in the wall. Thanks so much for watching and for taking the time to comment. I'm glad you enjoyed the video
That looks incredibly for the materials you've used! to think how much cheaper paper is than acrylic to still get that finish! Awesome Stuff Chris!
Thanks! Yeah much cheaper than acrylic. I wish i could find acrylic that is one solid piece but i think i would have to have a plastic manufacturing plant nearby otherwise it would be astronomically expensive. I'm just glad the paper worked great! Thanks so much for watching!
I use WLED for every led thing I make. I’ve bought close to 30 esp devices for projects for myself and other people, even made a control panel with a power button, brightness control, and preset selector knob that works amazingly well. Also fairyreef is my favorite palette.
WLED is really awesome! Glad you agree! That sounds amazing! did you by any chance make a video on how to do that?! I would love to watch it if you did!
I just did my baseboards in my office at my new house and I gotta say... I wish I would have seen this about 2 months ago... nice work and a great idea!
Thanks so much! Appreciate the kind words and thanks for watching!
This is incredible! Also thank you for the visual for the acrylic and the explanation!
You are very welcome and I'm glad you liked the video! Thanks for taking the time to comment. Hope you have a good one!
This is so well done with a fantastic result. Can't wait to buy my own place to be able to do this!
Thanks so much and I'm glad you liked the project! Thanks for taking the time to comment!
White paper instead of white acrylic! Genius! Now, why didn't I think of using that? Love this video. Subscribed.
Thanks so much for watching and for the support! Appreciate it!!
Very innovative ( as always ) . Happy that i subbed to your channel. I can see your projects progressing and getting more innovative. There are thousands of channels doing the same RGB decorative stuff and copying each other . Keep up the amazing work :)
Thanks so much for watching and subscribing! I'm glad you are liking the videos. Thanks again!
Very clean! I like how premium it looks even if you decided to take de "cheap" route (paper instead of acrylic and the paper roll for the wires) Great job
Thanks buddy! Glad you liked the project and thanks for watching! It might not be good enough for everyone but luckily I'm not a perfectionist lol Have a good one!
What amazed me the most was the blue paint tape that you used just to stick things on the wall!!!! I had to rewatch it again because i didnt catch that the first time around. But even that roll up you did to manage the cables made me laugh. You really got it figured out here and the results were very impressive!😮 A job well done! I think im a have to use your roll up idea to manage my cables too haha thank you for this video!
Very nice. I did a very similar build but used a couple diffused fluorescent light covers cut into strips to diffuse the light. I also had the corner problem and just made 3/4" squares instead of a triangle.
Thats a great idea! Yeah, part of the fun is trying to come up with solutions and materials that will work! Thanks for watching!
Didn't know I needed RGB baseboards till now. Looks great!
Lol yeah I tried finding a video on youtube how to make it before I started but couldn't find a single one! Thanks so much for watching and taking the time to comment!
You should invest in a set of feather boards for your table saw. They keep the piece of material that you are cutting pressed against the fence.
Ugh, I totally forgot that I got a feather board a couple months ago! I can't believe I forgot about it. That definitely would have made it easier and probably a little safer as well. Good call!
I'd call the second operation(second and third cuts) Rabbeting.
Granted you're not using that connect to anything but I think it's still the term.
LEDs don't like making turns in that direction. The little clips you used or soldering is nearly required.
I like that paper idea for diffusion. Something I haven't nailed yet for my projects.
Looks great!
Thanks for watching and thanks for letting me know the correct term! Rabbeting! Appreciate you taking the time to comment. Thanks again!
Man, that turned out AMAZINGLY!
Little pro tip:
Don't cut 45s on your inside corners. A cleaner and better fit is to run all the way into the corner on one. For the piece that will now butt up to that, cut it just a hair longer than you need. Then start on the free end and work toward the corner. You'll have to tap the end into the corner. After that, a tiny bit of wood putty across the top and inside edge and you'll have what appears to be a seamless connection.
The reason for this is that getting walls perfectly perpendicular to each other and getting two perfect 45s is a lot less likely than simple square cuts.
Thanks so much for watching and taking the time to comment. That's a great tip and as you can probably tell, I don't know much about woodworking so I appreciate all the advice I can get! Thanks!!
@@ChrisMaherDIY
No worries. Everyone starts somewhere. Also, if you have normal trim, you'll need a coping saw for my trick to work.
Lastly, and I forgot to say in my OP, really cool light setup. Provides just enough ambient light for pauses during movies.
Hands down the best DIY LED strip project I’ve ever seen!
Thanks so much! Glad you liked the project and thanks for taking the time to comment. Have a good one buddy!
@@ChrisMaherDIY Keep up the great work! I subscribed to see more! 👌👍
Hi Chris
I did like the way to enhance the environment of the room. I must say it is incredibly beautiful and would take the opportunity to do a simple project for my room in near future. Hats of to you Chris.
Thanks so much!! I'm glad you enjoyed the project. Let me know if you have any questions down the road! Thanks for watching!
Looks amazing man... I love the finished diffused look!
Thanks so much! Glad you liked the video and thanks for watching!
👏 for eliminating the hotspots. Great craftsmanship makes a difference, regardless of materials used
Thanks so much! Appreciate the kind words!
this. is. awesome. wow... everything about it. simplicity = genius. great job, and thank you for sharing. i just may do this for my office/gaming room.
Thanks so much and I'm glad you liked the video! Let me know if you add it to your game room! I'd love to see how it turned out.
I love how you've done this. I've seen bought ready made one's before but I didn't even like them. Your idea is better than those. Thanks
Thanks so much! That means a lot. I'm glad you enjoyed the project! Thanks for watching buddy!
Wow! Thank you for doing this. I have been wanting to do something like this for my childrens room.
You are very welcome and thanks for watching! I'm glad you enjoyed. Let me know if you have any questions!
WOW another super unique and creative project! LOVE IT CHRIS!!
Thanks as always :) hope to see you all sooner rather than later! Tell everyone hi!
the end result surprised me way more than i expected. would've loved to see a longer video on the end result in different settings :)
Thanks for watching! Yeah I never know how long to make the final pictures/videos. I though about installing it down one of my hallways but ended up not doing it. Maybe in a follow up video i will. Thanks!!
even with the price cuts you make it still looks really professional, great job. :)
Thanks so much! I'm glad you think so. Thanks for watching and taking the time to comment! Hope you have a great day!
Awesome video. Love the design to avoid the hot spots
Thank you! Glad you enjoyed buddy! Thanks for watching!
You've given me a project I want to take on 100% I love this so much
Thanks so much! Glad you enjoyed! Let me know if you have any questions!
pretty awesome final result for a budget oriented build. thanks for sharing!
Thanks for watching and taking the time to comment! I'm glad you liked the video!
Wow, amazing! Congratulations for this great job!
Thanks so much! I'm glad you enjoyed the video and thanks for watching!
Its magic is in its simplicity. Great job.
Thanks so much! Glad you liked the project. Thanks for watching and taking the time to comment.
Love the design! Definitely will use this in my music studio in the future
Thanks so much! Glad you liked it. Let me know if you have any questions!
I am loving this.. very inspiring! Have to give this a try!
Thanks so much! I'm glad you liked the video. Thanks for taking the time to comment and let me know if you have any questions if you try it!
Creative and great use of the long thin paper and the rolled-up poster paper!
Thanks! It definitly makes for a seemless look and much better than using a bunch of regular size sheets of paper. Thanks for watching!
Now here is something I wanted thanks man for giving the great idea with cheap budget ❤️
You are very welcome and thanks so much for watching!!
I love that. If only I had an extra room that I could make into a cinema, it would certainly be like yours. 🤩🤩🤩
Thanks so much for watching and taking the time to comment! I'm glad you like the look!
Looks awesome man! Great video. Thank you.
Thanks so much and you are very welcome! Glad you enjoyed it. Thanks for watching!
This is awesome Chris. Really great idea man.👏👏
Thanks! Glad you enjoyed the video. I'm a huge fan of your work! Thanks again for watching buddy!
Amazing work man. Thank you for sharing! I gotta try this out for my house.
You are very welcome and thanks so much for watching! I'm glad you liked it! Thanks for taking the time to comment!
Well, all in here makes sense to me. :) We use paper for making lanterns after all! If you want to still go the cheap route but make it a little more resistant, try different fabrics instead of papers. You can explore patterns and textures, see what you like the most. Very nice budget build for an awesome effect. Will be saving this.
Thanks so much for watching and for the great advice! Experimenting with different textures and styles is for sure a fun part of building something! Thanks!
What paper is used?
This is fantastic... Cant wait to build my house and have a cool, set up like this
Thanks so much! Glad you liked the video! Its definitly fun doing little projects like this. Thanks for watching!
Once again, fabulous video! What a cool idea.
Thanks as always buddy! Appreciate it!
Nice finished look! Creative man! Love the corners
Thanks! Glad you liked the video. Thanks so much for watching!
Awesome job increasing your sources of ignition and fire load!
Thanks for watching and for taking the time to comment!
Your work is amazing brother
This is awesome mate, I have now designed my own and when its done I'll post it up. Awesome Video
Congratulations for this amazing job!
Thank you! Cheers!
That it came out nice, damn i would that in my game room with all the RGB i have. Nice Job!
Thanks so much and thanks for taking the time to comment. Glad you liked the finished results! Thanks for watching!
Woah man, this looks so good! I'll definitely be making this!
I'm also really surprised that you don't have at least 100k subs since your video looks professional!
Thanks so much! Glad you liked the project and thanks so much for the kind words. Maybe someday I'll get there! Have a blessed day my friend!
that towers reacts on sound thats amazing😍
I'm glad you like the video! Thanks so much for watching!
Gorgeous! Like the glittering C-beams near Tannhaiser Gate…
Thanks!! That's a great comparison! Never would have thought that but i for sure see it now! Thanks for watching and taking the time to comment!
Well then.... if'n you'll excuse me I need to make a trip to Lowes and order some more Govee LED strips. The results you achieved look awesome, and far exceeded what I expected especially for the cost of your materials! Thanks for sharing!
lol glad you liked the project! Thanks so much for watching and taking the time to comment!
Looks incredible and so simple. Even the rolled up paper looks good lol
Thanks so much! I'm glad you liked the video and my cheap ways of doing things lol.
That is the cheapest yet best looking diffusion of RGB L.E.Ds I've ever seen.
Thanks so much Aaron! Appreciate you taking the time to comment and to watch!
Great job Chris. Going to use your idea for a project of mine.
Thanks so much! Glad you liked the video and thanks for watching buddy!
For a temp job going budget, looks really good. Quite impressive.
I love the simple design. Very nice idea
Thanks! I'm glad you enjoyed it! Thanks so much for watching.
bookmarking this video for a future project.. Thanks for this man! :)
You are very welcome and thanks so much for watching! Hope you have a blessed day!
I was like how will that works then keep watching .. wow creative! Good job man!
Thanks so much and I'm glad you enjoyed the video! Thanks for watching buddy!
LOOKS PROFESSIONAL!
Thanks so much for watching and I'm glad you enjoyed the video!
im doing this ! this looks good.
Really neat design for base molding
Thanks so much!! Thanks for watching buddy!
Excellent job! One of the best I've seen!
Thanks so much for watching and taking the time to comment!
Great video!! Your light setup is looking sweet man!
Thanks so much! Glad you liked the video. Merry Christmas!
Looks awesome with the lights out!
Thanks! I appreciate the support and thanks for taking the time to comment. Have a good one!
That's so cool. I might have to do this to my living room.
Thanks! Let me know if you have any questions if you do. Thanks for watching!
Thanks, for your channel testing BTF-Lighting LED, and have done a good job.
You are very welcome! Love your lights!
Very cool project - I like it and will definitely work that into a future project ✊
Thanks so much! Love your work. Thanks for taking the time to comment and to watch. Have a good one!
Amazing idea, will definitely try this out!
Thanks so much for watching and taking the time to comment. I'm glad you enjoyed!
You know that bar or nightclub that looks really cool and hip until they turn the lights on? Yeah, this is giving me those vibes.
Lol it doesn't look bad with the lights on (my wife might disagree haha) but for sure they were built for having the lights off. The next step would be to make everything look very sleek and premium so during the day it looks great as well. Thanks for watching and taking the time to comment.
Those are sick man! Very well done!
Thanks buddy! Excited to see your next project! Yours are always so epic!
Awesome stuff, I really like your videos!
Thanks so much! Thanks for watching buddy!
This looks amazing. Great job, my man 🌟👏💝
Thanks buddy!! Appreciate the support and thanks for taking the time to comment!
No Comment’s - Great 👍🏼 Job …..
Hi 👋 from Russia 🇷🇺 (Moscow City 🌆) …..
Thanks so much and hello from America! Hope you have a blessed day!
re: Thanks for the answer, there is a lot of gray in the world - I'm glad that you make it a little brighter.....
p.s. Sincerely, President: Chertanovo Chopper Custom Club.....
Moscow City
(I am writing to you from my daughter's account - my name is Maxim Nikolaevich)
Looks great. Excellent job and idea.
Thanks so much for watching and taking the time to comment! I'm glad you liked it!
thanks for sharing! this looks awesome!
You are very welcome and I'm glad you enjoyed the video! Thanks for taking the time to comment. Have a great day!
Nice job Chris. Good luck finding your new home!
Thanks so much! Its a crazy market out there at least in MN!
That looks great !
Thanks!
Hats off to you, Sir! Awesome video :)
Thanks so much! Glad you enjoyed it!
Absolutely badass
Thanks so much!! Appreciate the support!
Awesome man. Straight to the point.
Thanks so much! Lol yeah I jump right in. I'm not creative enough to have a cool intro lol. Thanks for watching!
@@ChrisMaherDIY Nah. "Problem solving content" > "cool intro".
Nice idea. Another thing to help diffuse the light would be to angle your cut on which you mount your LEDs away from the diffuser. Say 45 degrees or so, that way you have no way of seeing the direct LED and the light is diffused off of the back wall in addition to you acrylic, paper, or whatever diffuser you use.
BTW, are you syncing all of your lights with just WLED and running it on its effects?
Thanks for watching and love the way your thinking! That is definitely a great idea and I know exactly what you mean. And you are correct. I think I have 4 esp8266 boards controlling all the light projects you see and since they are all on the same wifi network I can control them all at once. All the animations are just some sort of variations of the preset ones on WLED. Thanks again and thanks for taking the time to comment!
Budget and it works. Paper might not work on floor led due to physical interaction but on the ceiling, this could probably do. Many thanks for the idea.
Thanks so much for watching and glad you liked the video! Always many different ways to do things for sure!!
Pine is very prone to warping under normal conditions. Paint only one side and you've made it worse. The acrylic would have helped a _little_ , but paper is basically a moisture wick. Add in the heat, minor as it is, from the LEDs, and I'd be very surprised if that thin section doesn't curl up and/or crack on you.. probably by now, since it's three months later. Paint both sides of the wood (yes, even though it won't be seen) to seal it. Sealing any end grain will help too. Wood glue works great for this - end grain will soak up a LOT of paint. If it'll be seen, sand the end grain well, then coat it with wood glue and give it a few minutes to soak in. Wipe or scrape off any excess and let the glue dry. Now you can sand lightly and paint it. The glue will help fill some of those deep pits that pine sometimes has when you cut across the grain. If you want it perfectly flat, use wood filler, but do the glue trick first. Most wood fillers are water based these days, and water + end grain... nope.
Thanks so much for watching and thanks for the great woodworking tips and advice! Thats such great information and I'll for sure remember this! Thank buddy!
Been wanting to this since 2001. Nice.
Thanks so much! Glad you enjoyed it and thanks for taking the time to comment!
Amazing setup!
Thanks! I really like it and its great for just having some mood lighting as i'm relaxing and listening to music. Thanks for watching!
Who would give this video a dislike ?!
Lol i'm glad you did not! Thanks so much for watching and taking the time to comment! Hope you have a good one!
subbed!!! absolutely amazing!!! 😍🤯
Thanks so much!!
This looks so good! great job. 👍
Thanks so much! Glad you enjoyed the video and thanks for watching!
Need this around my whole house!
Thanks so much for watching and taking the time to comment! Lol that would be quite the project doing in the entire house!
Cheap done right 👍 dayum looks gorgeous
Thanks so much! Appreciate the support and thanks for taking the time to comment!
@@ChrisMaherDIY I'm so doing this in my apartment
great job man it looks awesome!!
Thanks so much for watching and taking the time to comment!
very cool build looks so good when its on
Thanks so much! I'm glad you liked the end result. Thanks for taking the time to comment. Have a great day!