Amazing work you guys are doing at Z1! I have looked at every alignment option available for Frontier/Xterra and this is by far the best for any lifted application. My SPC UCAs were maxed out inboard just to get .5° positive camber. That is in conjunction with Essentric LCA alignment bolts. Amazing job on the new catback exhaust as well! Thanks for investing in the Nissan community with these RAD products!!
I would definitely recommend these upper control arms. The only problem I had was having a 4 X shop install them. I had redo the install. The shock tower was to close and cut the ball joint boot. I ordered a new boot and received it in a couple days. I ground the tower away about 3/16” allowing for plenty of clearance for boots. Another high quality Z1 product.
Ive had these for months now just waiting for good weather to install. I do have one concern though. Is it possible for the ball joint boot to contact the coil bucket when the truck is jacked up or on a lift? Ive heard of some people trimming the coil bucket. Id like to avoid that if possible. Thanks Z1
No need to modify the hole for the FUCA pick up points or the pocket that mounts the arm (like some of the other brands). Usually no modifications at all if you are using eccentric bolts full wide or our eccentric lockout bolt kit, but it is advisable to swing the arm past the coil bucket during install just to make sure the outer edge of the bucket isn't going to nick the ball joint boot. No more than that should be expected for for install with most lifts. If you have any questions feel free to give us a call or shoot us an email, we may catch that quicker than here. The arms pair perfectly with our eccentric bolt lockout kit www.z1offroad.com/suspension-components/z1-off-road/nissan-frontier-offset-eccentric-bolt-lock-out-kit-by-z1-off-road-p-45414.html
We don't have one currently in queue but we can try and get one together. In the mean time we do have a detailed install guide for each on their respective listing like this cdn.z1motorsports.com/upload/Install_Z1OR_FUCA.pdf
What parts would be required for front end titan swap on 2023 pro 4x? Control arms (top and bottom), cv joints/axle, and tie rod ends, plus shocks, correct?
Not for clearance, but if you’re looking for alignment adjustment the OEM eccentric bolt kit is our preferred option. www.z1offroad.com/front-suspension/assembled-by-z1-off-road/oem-frontier-xterra-pathfinder-eccentric-bolt-kit-p-20173.html
Amazing work you guys are doing at Z1! I have looked at every alignment option available for Frontier/Xterra and this is by far the best for any lifted application. My SPC UCAs were maxed out inboard just to get .5° positive camber. That is in conjunction with Essentric LCA alignment bolts.
Amazing job on the new catback exhaust as well! Thanks for investing in the Nissan community with these RAD products!!
I would definitely recommend these upper control arms. The only problem I had was having a 4 X shop install them. I had redo the install. The shock tower was to close and cut the ball joint boot. I ordered a new boot and received it in a couple days. I ground the tower away about 3/16” allowing for plenty of clearance for boots. Another high quality Z1 product.
that is one beautiful U.C.A.! i'm definitely going to run this whenever i begin my lift project.
Can we get a video install please.
nice, im adding these to my wish list lolz
Ive had these for months now just waiting for good weather to install. I do have one concern though. Is it possible for the ball joint boot to contact the coil bucket when the truck is jacked up or on a lift? Ive heard of some people trimming the coil bucket. Id like to avoid that if possible. Thanks Z1
I'm guessing you can buy the Titan version for a Frontier Titan Swap?
Correct!
Do i need to make hole larger just like with spc uca requires to make one side hole larger to fit the bolts?
No need to modify the hole for the FUCA pick up points or the pocket that mounts the arm (like some of the other brands). Usually no modifications at all if you are using eccentric bolts full wide or our eccentric lockout bolt kit, but it is advisable to swing the arm past the coil bucket during install just to make sure the outer edge of the bucket isn't going to nick the ball joint boot. No more than that should be expected for for install with most lifts. If you have any questions feel free to give us a call or shoot us an email, we may catch that quicker than here. The arms pair perfectly with our eccentric bolt lockout kit www.z1offroad.com/suspension-components/z1-off-road/nissan-frontier-offset-eccentric-bolt-lock-out-kit-by-z1-off-road-p-45414.html
So do I have to do do modifications with this using it into a 2023 titan P4X? I didn’t quite understand.
Anytime you are lifting one over 1.5" then it is recommended to go with aftermarket UCAs to prevent and coil bucket contact.
Is this will work with 6" RC ? Swap the oem UCA with Z1 UCA?
Both will work with RC 6”. If going 6”+ extended travel shocks you’ll need arms with more clearance like these.
Will there be an install video for these?
We don't have one currently in queue but we can try and get one together. In the mean time we do have a detailed install guide for each on their respective listing like this cdn.z1motorsports.com/upload/Install_Z1OR_FUCA.pdf
Can you please make one
What parts would be required for front end titan swap on 2023 pro 4x? Control arms (top and bottom), cv joints/axle, and tie rod ends, plus shocks, correct?
Yea sounds about everything for the front the rear is very simple just shackles and wheel spacers.
nice
Are these uniball or sealed ball joints?
sealed and serviceable
do these arms fit a 2014 Nissan NV 2500
Are they lifetime warrantied?
Z1offroad, do any mods need to be done if your using these on a D40 Frontier with stock ride height ?
Not for clearance, but if you’re looking for alignment adjustment the OEM eccentric bolt kit is our preferred option. www.z1offroad.com/front-suspension/assembled-by-z1-off-road/oem-frontier-xterra-pathfinder-eccentric-bolt-kit-p-20173.html
@@z1off-road Yes I was wondering about clearance. Thank you.
Will this fit a 2024 Frontier Pro 4X?
Yes
Would this fit a 2010 QX56?
Yes, our Titan arms will. www.z1offroad.com/z1-products/z1-off-road/nissan-titan-front-upper-control-arms-by-z1-off-road-p-40601.html