Did anyone else notice that the spigot shaft splines are almost completely chewed away? A pretty pointless job with the crap beat out of everything during the strip down and reassembly. No lube on the bearing surfaces etc etc. Pretty much a textbook example of how not to fit a bearing lol.
La lavó , limpió y la volvió a armar. Le faltan las trabas de 2da y 3ra, el seguro del ruleman de directa, donde va la planca esta muy comido y va a tener juego y la guía de directa esta rota🤷♂️
No new seals or gasket once that transmission gets in installed and the transmission once it has tranny oil in it and that dude starts shifting gears there’s going to be oil every wear that transmission was not properly sealed.
Estupendo tanto el contenido como el resultado obtenido en esta restauración de la caja de cambios de un coche antiguo, mis respetos y saludos desde Venezuela.💯💯💯💯💯👍👍👍👍👍🤘🤘🤘🤘🤘🤘🙏🙏🙏🙏💯💯💯💯💯
Eso no es restauración, solo lavo las piezas y las volvió a poner, no cambio baleros nuevos, no puso juntas, uso silicón , a eso no se le llama restauración solo lavado de piezas y no entiendo porque trabaja en el suelo, no seria mas facil usar una mesa de trabajo? pero hace bien en compartir sus videos pues algo aprendemos diario.
As I've said before doing this for 50 years one of my best friends on the planet is a hot pressure washer I try very much to push myself to pressure wash everything before I touch it the last thing I want to be a super filthy Plus all the scraping and scratching and while brushing and all that time wasting the pressure washing takes a maximum of 10 minutes with the right pressure washer if you spray purple step on it and go to the pressure washer it takes it all off down to nothing if you put you drain the fluid out and then put in a quart of kerosene and spin it or shake it or whatever and wash it out now you got a nice clean internals I've seen guys on restoration shops doing cars all they do is scrape with a wire brush and screwdriver a putty knife paint remover get a fucking 3500 Pound Pressure Washer and pressure wash the son of a bitch and it takes two hours to do the whole car
The thing I've always strive to do in 50 years is clean the shit now I've worked on greasy shit and I've worked with greasy hand from the greasy shit but when you're rebuilding stuff wash your Flippin hands because you get grease marks all over everything and wiping it off or wiping it off with WD-40 doesn't work it's like painting a car and then touching it with Your Filthy Hands that's not a mechanic that's not rebuilding and you don't do it on the floor do it on the bench
The thing I've always strive to do in 50 years is clean the shit now I've worked on greasy shit and I've worked with greasy hand from the greasy shit but when you're rebuilding stuff wash your Flippin hands because you get grease marks all over everything and wiping it off or wiping it off with WD-40 doesn't work it's like painting a car and then touching it with Your Filthy Hands that's not a mechanic that's not rebuilding and you don't do it on the floor do it on the bench
![[TH] VCT Masters Shanghai Swiss Stage DAY 5 // FPX vs TH | FUT vs LEV](http://i.ytimg.com/vi/r61uDZTmu44/mqdefault.jpg)
![[TH]FFWS SEA Spring 2024 Final](http://i.ytimg.com/vi/TK2mu-8yBFU/mqdefault.jpg)
Nice video of how not to restore a gearbox
Yeah where are the measurements and replacement of worn out of spec parts?
Подшипники явно угондошены
@@ragnarragnarsson3128 i didnt see any bearings so what to replace 😂. The amount of space on the main bearing at 10.00 hahahah
@@rikmanders3094 yep horrendous...lol
That’s not a restoration , that’s cleaning.
It’s a revision
Looks like a clean up only to me
Did anyone else notice that the spigot shaft splines are almost completely chewed away? A pretty pointless job with the crap beat out of everything during the strip down and reassembly. No lube on the bearing surfaces etc etc. Pretty much a textbook example of how not to fit a bearing lol.
Glad I'm not the only one thinking this. Lol. Dry assembling everything and pounding in the bearings like that killed me
He’s bangin’ on them bongos like a chim-pan-Zee, oh that ain’t workin’...
Yep, saw that and the way that the shaft wobbled around. That thing's going to screech like a banshee if it ever gets fitted to a car.
Did not install any new bearings?
Это называется разбирай посмотрим ,собирай походит🤣🤣🤣🤣
I am cynthia like old greabox and bearings were very old rusty l love your people in china
Неясна причина разборки коробки передач, все для того чтобы ее помыть?
Good work, next time use gasket and replace bearings and seals.
Just washed parts not restoration.
Don't spoil it Lazarus, we don't know any different.
Love the safety footwear. What are you going to do with the gearbox, use it for a boat anchor, its certainly no use as a car gearbox.
Дриставрация🤣
Называется "выкрасить да выбросить"
Разобрал омыл покрасил собрал - реставрация. А смазку то чего не положил?
thank you
Новые запчасти?неее,не слышал.подшипники менять надо
i liked when he opened the drain plug, and nothing came out
La lavó , limpió y la volvió a armar.
Le faltan las trabas de 2da y 3ra, el seguro del ruleman de directa, donde va la planca esta muy comido y va a tener juego y la guía de directa esta rota🤷♂️
No new seals or gasket once that transmission gets in installed and the transmission once it has tranny oil in it and that dude starts shifting gears there’s going to be oil every wear that transmission was not properly sealed.
Estupendo tanto el contenido como el resultado obtenido en esta restauración de la caja de cambios de un coche antiguo, mis respetos y saludos desde Venezuela.💯💯💯💯💯👍👍👍👍👍🤘🤘🤘🤘🤘🤘🙏🙏🙏🙏💯💯💯💯💯
yes thank you
@@restoration-bq3921 💯👍
Eso no es restauración, solo lavo las piezas y las volvió a poner, no cambio baleros nuevos, no puso juntas, uso silicón , a eso no se le llama restauración solo lavado de piezas y no entiendo porque trabaja en el suelo, no seria mas facil usar una mesa de trabajo? pero hace bien en compartir sus videos pues algo aprendemos diario.
Easily done .. 100/100
Dép tổ ong biết là việt nam rồi
Тип в туфлях и без носков)))
Clean Up, but not restoration
I didn't see any grease going on the bearings?
Front bearing retainer broken.
what about the broken gear teeth in frame 3:43 and frame 4:26
I guess the carpet needs restoration
very nice restoration👍👍👍
thank you very muck
Where do you see any restoration work? It´s only cleaning.
@@GettingNervous cleaning is also a kind of restoration or renovation :)
@@RESTORATIONOFSCRAPMETAL So do I restore my dishes every day? What nonsense.
Me: No way he can restore this
BQ Restoration: Hold my beer
Good like
Could have just cleaned and painted the outside, what he achieved was not a workable gearbox.
Yep. Ooga booga BIX N00D muh dik
Туфли времен разработки этой коробки. 🤣🤣🤣
Граф трансмисьён. 😭😭😭
This makes want to go out and restore something lol
Bubble wrap, because why not?
Thanks ! Silence is better all natural it help to concentrate on what you doing insted of listening some music which is so anoying 😎👍nice job!
Whats it out of ??
Don't forget to like this video🙏🙏🙏🙏❤
Good as new and sold to a sucker on eBay 😂
As I've said before doing this for 50 years one of my best friends on the planet is a hot pressure washer I try very much to push myself to pressure wash everything before I touch it the last thing I want to be a super filthy Plus all the scraping and scratching and while brushing and all that time wasting the pressure washing takes a maximum of 10 minutes with the right pressure washer if you spray purple step on it and go to the pressure washer it takes it all off down to nothing if you put you drain the fluid out and then put in a quart of kerosene and spin it or shake it or whatever and wash it out now you got a nice clean internals I've seen guys on restoration shops doing cars all they do is scrape with a wire brush and screwdriver a putty knife paint remover get a fucking 3500 Pound Pressure Washer and pressure wash the son of a bitch and it takes two hours to do the whole car
I like it 🙂 sweet very nice work 🤠 for all others to bad 😉. I am Lee GoldenEagle f u the man did good very nice work 🤠 Lee thanks
thank you
Stop mecanic man. No Newtonspower
sorry...............he failed to replace bearings and seals.
Аааа сойдёт и так.
Good video restoration BQ KAKA
THANK YOU VERY MUCK
вал первічний нада мінять шліци там збиті підшипники також правильніше назвать розібрав, помив, покрасив і викинь
E.do.melhor
This is a disgrace on so many levels...
You have me a heart for that comment? I'd hate to see your bad work...
Разбирал чтобы покрасить и герметиком помазать? Ну чудик!
The thing I've always strive to do in 50 years is clean the shit now I've worked on greasy shit and I've worked with greasy hand from the greasy shit but when you're rebuilding stuff wash your Flippin hands because you get grease marks all over everything and wiping it off or wiping it off with WD-40 doesn't work it's like painting a car and then touching it with Your Filthy Hands that's not a mechanic that's not rebuilding and you don't do it on the floor do it on the bench
Like video
А если по хорошему то там половина коробки в хлам идёт
What
Бомж-пакет. !
Why your skip video cleaning the mesin?.....i dont like it 👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎👎
The thing I've always strive to do in 50 years is clean the shit now I've worked on greasy shit and I've worked with greasy hand from the greasy shit but when you're rebuilding stuff wash your Flippin hands because you get grease marks all over everything and wiping it off or wiping it off with WD-40 doesn't work it's like painting a car and then touching it with Your Filthy Hands that's not a mechanic that's not rebuilding and you don't do it on the floor do it on the bench