Here for the first time? Or 100th? Check out our latest Redline Rebuild: th-cam.com/video/94ijZ68-hf8/w-d-xo.html This time we take a rusty old Ford dirt track race car with a Chrysler 440 V-8 and bring them back to life!
"Wake up buddy" - "Uuuugh..!" - "Wake up youre late" - "*** off" - *kick* - "What time is it..?" - "2023" - "..." - "You gotta work to do" Imagine if that were you, in your retirement past a 100th anniversary
Whoever recorded this and edited it is doing some absolutely INCREDIBLE work. Its what MAKES these videos as good as they are. To whomever you are, good.freaking.job.
I cannot recall when was the last time I had so much pleasure watching a time-lapse. Kudos to the filmmakers for putting together such an astonishing video.
Watching this brought back some memories. I run these engines 50 years ago and have worked on them. They were called Babbitt bangers because they have poured Babbitt bearings in the rods. The rods are not pressure fed they dip oil with each stroke out of the trough. The insert rod conversion was a good improvement that helped the engine hold up better under high RPMs.
I’m not a car or engine guy but my god that video was so incredible I couldn’t look away. Amazingly well shot and edited and so much work went into that project. Really outstanding guys!!
I'm 65 and I remember when there were lots of old bubble nose Chevy trucks still on the road. Makes me feel good every time I see one of these sweet old pickups brought back to life.
Blown away with the videography! The editors at hagerty must be one of the best in the entire community! Hagerty never disappoints. Best timelapse and stop motion I've ever seen!!!!!🔥
I'm 44, I've never rebuilt an engine, always wanted to learn, that sense of accomplishment and satisfaction when you first fire it up has to be amazing.
I just finished rebuilding my second motor. First was an overheated 70's 85hp, 3 cylinder, triple carb, 2 stroke Chrysler outboard that was in three cardboard boxes when I bought it. I was 16~17 at the time, and my dad was so mad that I bought this boat. He swore that I'd never get it to run. I bought the books and needed tools, had the cylinders bored and head surface planed, replaced the pistons, rings, bearings, head, and gaskets. One month from the day he told me it would never run, I had it back in the boat and started it up! Never did get an apology or anything. 😄 Second was a 70's Ford 3 cylinder diesel that puked its oil and seized. Went through the same procedure, and while it took significantly longer to complete, it also is back up and purring. Ya just gotta go at it and get it done. Fear is our biggest obstacle.
@@sadmachines6991 I bet that's the truth! That bugger injection pump fought me a full ten days before I got it straightened out. That's definitely a cost you really couldn't pass to a customer, if I had been rebuilding for a customer. Headaches can throw profit down the toilet in a hurry.
@@sadmachines6991 500! 500 engine rebuilds. That's the number I figured when I was a kid! 500 teardowns before you could consider yourself a legitimate engine rebuilder. You need it for experience - to develop leather skin! So I got started ... I tell you, you learn a lot of things on the way to 500. None more important than this ...😉😎😂
Makes me appreciate my Football Coach and Drivers Ed teacher who restored a 1950 GMC pickup to perfection and sold it to me for $300. Yes that was in 1973, but man what a truck that was. Looked as though it just came off the production line. 6 volt battery located under drivers side of bench seat, floor starter, box-heater under passenger side dash, hugh steering wheel because there was power steering...ran, drove and looked immaculate. RIP Coach.
Because the world has moved on from 40s-70s junk welcome to the 21st century where old "jewels" dont matter. We like putting hard effort/work towards more oh i dont know useful projects per say?.
I'm a lady with no knowledge of the workings of cars, but THAT was delightful to watch. The hours and hours of attention to detail was impressive. Great timelapse!👍👍👍
My great grandfather was a machinist for Chrysler. The way he held his tools and the precision he did everything thing with was amazing to watch. This video reminded me of him.
Just pulling the pictures off onto the timeline. Frame duration of 1/24 sec each and it should be pretty quick. Actually taking the time to take the pictures though is the tough part.
Just for those of you who were wondering, all the music used in this video is by *Tigerblood Jewel* . Here's the timestamps: 0:00-2:23 Let's Go Go Go 2:24-3:39 Ghostly 3:40-5:23 I think You Better 5:24-6:56 Feels Like I'm Going Crazy 6:57-7:40 Demon
I had a 48 Chevy stylemaster Town sedan with the same motor in it men this video brings back memories I had taken my motor out just like he did and I had everything on it Chrome plated the oil bath the intake exhaust manifolds everything love it
So satisfying to watch these incredibly talented restoration professionals bring a classic, like this, back to life. I'm so impressed by talent like this. Killed it guys!
@@Chris-tl9wd as an example, was the Ford Flathead owner wrong to add a custom Ardun head to prevent overheating back in the day? Maybe they kept the original head. More recently, Jay Leno owns at least 1 original Lotus Elan and 1 almost completely custom Elan. Anyone is free to prefer 1 or the other, the 1989 Mazda Miata that copied it, or the faster and safer 2019 MX-5 Miata for more money that will likely be more reliable, at least short-term. See the recent Consumer Reports top ten list for reliability. I bought a Dodge Dart with a slant 6 engine for $200 decades ago- very reliable engine and better gas mileage than a V8. After the automatic transmission lost reverse it went to a junkyard for parts. I got my money's worth from it by then.
The entire production of this video just makes me tingle with enjoyment! Who, as a car and truck enthusiast, doesn't love this 100%?! Excellent job everyone involved!!
Let alone to bring a 70-year old 6-cylinder block engine back to life. Yet it goes to show you that simpler is better, as older cars were all mechanical, and not electronic like today's cars and trucks.
Hello friends, I love what you do, give life to an old vehicle that had to stop maybe due to lack of budget, how beautiful it is to live in a country where nothing stops you to rebuild such a vehicle, I have a Jeep truck that has been in my garage for almost 12 years stopped because here in Venezuela it is practically impossible for a person with few resources to be able to do something like this, I love mechanics and I swear that I would love to revive my truck again but as I already told you I said that here it is impossible ... I liked your video I do not speak English ok but for that we have the internet right hahaha thanks for sharing
@@JuanHernandez-ub3ez YES, that is also very true. As a retired industrial mechanic/machinist/ welder I have personally experienced that too. But then I never had a problem finding a job, repairing or building my own equipment either. I value that self worth highly when I look at the shop labor rates ($75.) and trying to keep things running, put food on the table and paying bills. What do millennials do to keep their things running... pay, pay, pay?!
My great grandfather had a truck almost identical! I used to ride in it! It’s awesome to see new life a come back to it! And come back to almost brand new! With extra added character! Awesome video!
@Charles Mc Cathy..... The real difference is can a surgeon bring someone back from the dead? An not after being dead for a minute..... Nuf said both are equally important an skilled
I'm 77, my dad had a 53 five window. I worked on that many times, including engine rebuilds. Very reliable truck, had it for 20 years. Good memories, thank you.
Hitting the starter and just hearing the engine turn over, took this ”50's boomer" back to my early teenage days. Thanks for the memories and a very well done video.
You will see some guys spending most of their time with a computer. In 20 years all the electronics will be obsolete and impossible to recreate it would be like rebuilding a 1970 computer and you will miss all the software. So actually concerning.....
Cars; - everybody wants it, people buy it new - people buy it used - it’s too old, yet not old enough to be cool. People throw it away because nobody wants it anymore - it’s old af, people will rebuild and restore it - it ends up being worth silly money, often more than it’s original retail price
If that happens to you, remove the master link that holds the 2 ends of the chain together. Then hang the chain by one end and make sure it is not bent. If it doesn't hang straight it's bad and should be replaced or repaired i.r. grind off the pin heads and punch out. Remove the bad links and replace with more master links. Then put the chain back on to the sprockets (priorly inspect sprockets for quality and alignment too) and bring it under tension with the pedal. You should then be able to join the 2 ends of the chain together enough to replace the master link. You could do that with help of a small pionted tool driver or a pocket knife type of multi-tool to remove and install the master link clip. Good luck 🍀
I really appreciate these time lapse videos. I understand how long they take to film VS just putting the engine together and it makes it great fun for all of us
My girlfriend and I were walking down her street one day and we saw one of these, it was in great condition and bright red. Now she’s not a car or truck person, but she actually said she thought it was a pretty awesome truck. I think I’ll buy her one some day,
Тут еще как бы к месту анекдот про фотографа и кастрюли. Инструменты у мастеров хорошие спору нет, но вот без таких мастеров это груда металлолома. Если человек рукожоп, то и хорошие станки его не поправят. Автор канала и его коллеги из золота.
Wonderful video! I loved the time lapse. Great editing of both sound and video. From a car guy perspective I appreciate seeing someone restore the stovebolt as apposed to sticking a 350 in it. I recently got a pair(49 and 51) of old Chevy trucks and can't wait.
Watching this rebuild was so satisfying! Engine rebuilding is a dying art. New generation cars are made to be disposable. The engines are becoming less rebuildable with the use of cheap metals and materials. They are making them where it almost makes no financial sense to rebuild, instead to just replace altogether. Engine rebuilders are in demand as the older guys are retiring.
Me too, I wish we could recycle all the engines in the junk yard not only better than today's engine also solve many problems as pollution and be good for the environment.
This is an awesome, totally awesome production. Wow. Each and every step covered, in a great and precise way. Wow. Sat in awe here of not only the job done but the filming.....
That was an excellent show, in presentation, camera use, and especially the music. Absolutely nailed it! In school we would call this made by the talented and gifted.
With the proper knowledge, pride of workmanship, tools and equipment, a project like this is a pleasure. I've seen backyard guys try an prep the head gasket surface with an angle grinder....
@@rykerhayward8606 yup. Before I studied automotive engineering I only had a vague idea of an engine (pistons, crankshaft, valve rods, camshaft, sparkplugs, that was about it), but now this video looks like a reasonable project
@@timbroski4487 have u ever heard of Studebaker well I got a 1950 2r5 thats been sitting for about 20 years now and im trying to get it running i think imma have to do this to it 😂 just wish I knew what I was doing all the time
@@hollowsquad901 first motor I messed with was a 350 out of a 79 Chevy Bonanza big 10 I was 13 my dad threw a Chilton book at me and said see ya, I had no fucking clue what I was doing 🤣🤣🤣 I wish I still had that truck though 😣 she was ugly but my God!!!! Did she get nasty lol
Wow! This is really something... outstanding job. Really like the time lapse photography...great work on the motor, great production values... this puts a lot of mainstream commercial shows to shame!
Auto building in America used to be an art ! It's nice to see some traditions are still holding on!! Great video! The paint job on the engine is beautious! How about the completed truck ??
What a wonderful sound when it fired up. I have one about twenty feet from me in the garage that hasn't run in 45 years. Makes me want to start it! ❤ Thank you!
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
Here for the first time? Or 100th? Check out our latest Redline Rebuild: th-cam.com/video/94ijZ68-hf8/w-d-xo.html
This time we take a rusty old Ford dirt track race car with a Chrysler 440 V-8 and bring them back to life!
272nd.
Nice❤️❤️
"Wake up buddy" - "Uuuugh..!" - "Wake up youre late" - "*** off" - *kick* - "What time is it..?" - "2023" - "..." - "You gotta work to do"
Imagine if that were you, in your retirement past a 100th anniversary
In Brazil, this engine is called GM 261 "canavieiro
Amazing video! The step-by-step instructions made the repair process much easier to understand 0:33
The camera work is just as skilled as the mechanic work. And none of the fake drama of TV shows.
Just wondering how many days before they have finished it 🙂😂
Thats high end Entertainment
+Chuck Coy Watch Tim Allen parallel this would have been fun.
The best of the best.
I was just thinking how good/cool the editing is.
Whoever recorded this and edited it is doing some absolutely INCREDIBLE work. Its what MAKES these videos as good as they are. To whomever you are, good.freaking.job.
Agree. Super visually interesting- I think someone would enjoy this even if they weren't into cars.
@@MediumHalf That's the thing, I dont know a damn thing about cars other than how to change my oil.
Exactly my thoughts. Do you happen to work in production, too?
@@ramowas Not anymore, but I did briefly
Well said, this was brilliant!
I cannot recall when was the last time I had so much pleasure watching a time-lapse. Kudos to the filmmakers for putting together such an astonishing video.
Well put.
❤❤😊
So cool. The engine rebuild is amazing...but lets give a shout out to whoever did this amazing time lapse video!
I was very proud of myself yesterday when I successfully adjusted my bicycle brakes.
I couldnt even do that 😪
Well done
I wish i could adjust mine.
Mine is on the way haha long time trying to solve it
Not sure if it’s the truth! But sure life is all about achieving achievements one after another 👍 well done to you if it’s the truth 🌟
Not sure why TH-cam thought I needed to see this... TH-cam was right, definitely needed to see this.
Same.
Hey! I loved every fast minute of it!
Lol same here. It also helps since the video is really well made.
You`ve got to thank the guys at Hagerty for doing it!!! Huauuuuhhhh!! Taking my hat off!!!
Check out my TH-cam channel
The amount of skill on display in this video is epic, from the engine rebuild to the camera work, very well done!
I think the video was harder to do than the rebuild
Great work, great video story boarding
Watching this brought back some memories. I run these engines 50 years ago and have worked on them. They were called Babbitt bangers because they have poured Babbitt bearings in the rods. The rods are not pressure fed they dip oil with each stroke out of the trough. The insert rod conversion was a good improvement that helped the engine hold up better under high RPMs.
❤❤😊
Loved the clear and practical tips in this video. It’s very informative!
I’m not a car or engine guy but my god that video was so incredible I couldn’t look away. Amazingly well shot and edited and so much work went into that project. Really outstanding guys!!
Just goes to show all the painstaking details, steps and parts thst go into rebuilds. Also, the bigger the worktable, the better. 😉
I didn't see it running or maybe a test run that might be a good ending
Im still like wtf.
@@humblelastguy6895 He started the motor and had it idle at 500 rpm.
@@glenhardy4770 WOW amazing 😀
Best time-lapse rebuild footage I've ever seen. Well done with the production!
BallaMOTO I was about to comment that the video editor needs a raise
BallaMOTO and John M.
100% agree ... absolutely great work
👍👍👍😎😎😎
My words exactly.
Right! Unreal
I agree bro, I don't even watch stuff like this but dam this was perfect for impatient people lol
I'm 65 and I remember when there were lots of old bubble nose Chevy trucks still on the road. Makes me feel good every time I see one of these sweet old pickups brought back to life.
Blown away with the videography! The editors at hagerty must be one of the best in the entire community! Hagerty never disappoints. Best timelapse and stop motion I've ever seen!!!!!🔥
❤️❤️😊
I'm 44, I've never rebuilt an engine, always wanted to learn, that sense of accomplishment and satisfaction when you first fire it up has to be amazing.
I just finished rebuilding my second motor. First was an overheated 70's 85hp, 3 cylinder, triple carb, 2 stroke Chrysler outboard that was in three cardboard boxes when I bought it. I was 16~17 at the time, and my dad was so mad that I bought this boat. He swore that I'd never get it to run. I bought the books and needed tools, had the cylinders bored and head surface planed, replaced the pistons, rings, bearings, head, and gaskets. One month from the day he told me it would never run, I had it back in the boat and started it up! Never did get an apology or anything. 😄
Second was a 70's Ford 3 cylinder diesel that puked its oil and seized. Went through the same procedure, and while it took significantly longer to complete, it also is back up and purring.
Ya just gotta go at it and get it done. Fear is our biggest obstacle.
Yeah, until youve built your 500th engine and barely making enough money to feed yourself and pay rent...been there, done that
@@ElementofKindness " Fear is our biggest obsticle." I like it.
@@sadmachines6991 I bet that's the truth! That bugger injection pump fought me a full ten days before I got it straightened out. That's definitely a cost you really couldn't pass to a customer, if I had been rebuilding for a customer. Headaches can throw profit down the toilet in a hurry.
@@sadmachines6991 500! 500 engine rebuilds. That's the number I figured when I was a kid! 500 teardowns before you could consider yourself a legitimate engine rebuilder. You need it for experience - to develop leather skin! So I got started ... I tell you, you learn a lot of things on the way to 500. None more important than this ...😉😎😂
The time lapse guy gets a raise this time. The tape roll down was epic.
Dave Butler faxx!
👍
Omg yesss and the parts coming out of the box
You should watch the harley and vw rebuild if you liked that
and how there were two of him while doing the piston rings...
awesome!
The amount of knowledge, skill, work, money and dedication to this task is staggering! Job well done!
Biggest is money, with money, all things are possible.
Makes me appreciate my Football Coach and Drivers Ed teacher who restored a 1950 GMC pickup to perfection and sold it to me for $300. Yes that was in 1973, but man what a truck that was. Looked as though it just came off the production line. 6 volt battery located under drivers side of bench seat, floor starter, box-heater under passenger side dash, hugh steering wheel because there was power steering...ran, drove and looked immaculate. RIP Coach.
It does my heart good to see somebody still knows how to work on those old straight sixes
Love it when they get headers, EFI and a turbo
May not have been too powerful, but they were solid reliable workhorses. You could overheat them 156,000 times and still be no worse for wear.
Not too many of those old school mechanics anymore. Especially when I saw the guy rebuilding the distributor with points
Not nearly enough of society appreciates the talent and intricacy needed for something like this.
We need urgently a society to make stuff to last and BE transform and fix... The making new all the time is not sustainnable.
Sad 1.4K dislikes this video. 🤔
Because the world has moved on from 40s-70s junk welcome to the 21st century where old "jewels" dont matter. We like putting hard effort/work towards more oh i dont know useful projects per say?.
cmd1zz13 agree..
I'm a lady with no knowledge of the workings of cars, but THAT was delightful to watch. The hours and hours of attention to detail was impressive. Great timelapse!👍👍👍
This is the best time-lapse I've ever seen. Also, this looks expensive...
+Conrado Balbinot That it does. Very expensive. A ballpark dollar figure eludes me though.
Probably about 5-6 grand for a rebuild like this if you wanted someone to do it for you
@@judgejudy7283 THANK YOU! You have given me a starting point.
My thoughts exactly, my goodness the labor cost of these rebuilds!!
@@judgejudy7283 i'd think it was twice that.
People who can rebuild an engine have my full admiration great video chap.
My great grandfather was a machinist for Chrysler. The way he held his tools and the precision he did everything thing with was amazing to watch. This video reminded me of him.
I dint know what's more impressive, how beautiful that engine looks or the incredible stop motion timelapse done by your production team.
You know it's a pro when they don't cheer and laugh when the engine fires up for the first time
Yeah, just a normal thing :)))))
Yeah. There was still an unseen huge sigh of relief.
I would be too nervous to move
He just simply says: "This one's done." LoL!
He's probably too busy listening to it. (Ears are diagnostic tools)
I have incredible respect for anyone who can do this type of job. The coffee break around the 4 min mark cracked me up. The guy deserved a break!
❤️❤️😊
As a fellow TH-camr, I would not want to edit one of these video's. *I couldn't imagine the time spent.* Good job Hagerty team. 👍👍👍
And please don’t stop!
Just pulling the pictures off onto the timeline. Frame duration of 1/24 sec each and it should be pretty quick. Actually taking the time to take the pictures though is the tough part.
Farm Alarm I’m like how much of their budget is editing
@@SteedDigital1 you could film and edite the parts you don't want. Tan speeeed up. This would be my simple solution haha
Just for those of you who were wondering, all the music used in this video is by *Tigerblood Jewel* . Here's the timestamps:
0:00-2:23 Let's Go Go Go
2:24-3:39 Ghostly
3:40-5:23 I think You Better
5:24-6:56 Feels Like I'm Going Crazy
6:57-7:40 Demon
EVILBUNNY28 Thanks, the music is always good in those videos.
Bloody legend!
Two worth quality of this video:
1. The rebuilding process.
2. Cameraman+editing.
What camera and gear was used in this video? Absolutely incredible time lapse. Seriously next level. Thank you
Play it back in slow motion its awesome
I had a 48 Chevy stylemaster Town sedan with the same motor in it men this video brings back memories I had taken my motor out just like he did and I had everything on it Chrome plated the oil bath the intake exhaust manifolds everything love it
The first song is really cool too.
I was gonna say the same thing then i saw your comment. It s a incredable job, isn't it?
So satisfying to watch these incredibly talented restoration professionals bring a classic, like this, back to life. I'm so impressed by talent like this. Killed it guys!
❤️😊
I enjoy seeing old engines brought back to life.
Hagerty
Your film and editing team really has their time-lapse game together. Some of the consistently best time-lapse stuff i've ever seen.
This is how a timelapse ought to be done.
👌
The amount of skill and knowledge is just humanity at its best.
It's manufacturing skills shipped off shore for greed. This is what america is capable of
Enjoy your restoration and rebuilds much more than any of your other videos
The amount of labor, expertise, parts, money put into this is amazing. No wonder restoration is so expensive. Very interesting.
Love the fact it is using the original engine.
To be more practical, a newer small-block Chevy crate engine would be less money and time consuming, but some prefer original.
@@jeffruebens8355 That's the problem with with the car culture now a days.
@@jeffruebens8355 ah but a good ol' inline 6 is a great engine anyways
@@Chris-tl9wd as an example, was the Ford Flathead owner wrong to add a custom Ardun head to prevent overheating back in the day? Maybe they kept the original head. More recently, Jay Leno owns at least 1 original Lotus Elan and 1 almost completely custom Elan. Anyone is free to prefer 1 or the other, the 1989 Mazda Miata that copied it, or the faster and safer 2019 MX-5 Miata for more money that will likely be more reliable, at least short-term. See the recent Consumer Reports top ten list for reliability. I bought a Dodge Dart with a slant 6 engine for $200 decades ago- very reliable engine and better gas mileage than a V8. After the automatic transmission lost reverse it went to a junkyard for parts. I got my money's worth from it by then.
@@jeffruebens8355 sir i am srilankan i want to work with you how can
It's possible
I'm more impressed with the amount of editing and set-up it took to get a lot of these shots. The video itself is a work of art
The entire production of this video just makes me tingle with enjoyment! Who, as a car and truck enthusiast, doesn't love this 100%?! Excellent job everyone involved!!
OMFG, just the sheer amount of effort went into this production! This is like distilled humanity. Awesome!!
Let alone to bring a 70-year old 6-cylinder block engine back to life. Yet it goes to show you that simpler is better, as older cars were all mechanical, and not electronic like today's cars and trucks.
Hello friends, I love what you do, give life to an old vehicle that had to stop maybe due to lack of budget, how beautiful it is to live in a country where nothing stops you to rebuild such a vehicle, I have a Jeep truck that has been in my garage for almost 12 years stopped because here in Venezuela it is practically impossible for a person with few resources to be able to do something like this, I love mechanics and I swear that I would love to revive my truck again but as I already told you I said that here it is impossible ... I liked your video I do not speak English ok but for that we have the internet right hahaha thanks for sharing
Your English is fine, more than ok. I hope you find help for your Jeep.
Hermano latino ojala que las cosas se pongan mejor en tu país saludos de El Paso, TX
Do you request America to help deliver Freedom? We gotta fix that JEEP.
These men are engine machinists!!!!!!
More than a brilliant mechanic, you’re an artist. Love these time lapse. Well done to the production crew too
only those of us that have actually done it can truly appreciate the work and time that go in to doing something like this
I feel this will soon be a "lost art", rebuilding a engine of this era.
Already is!
As a machinist/fabricator is super easy to find a job due to not many qualified people, some try but fail
@@JuanHernandez-ub3ez Not too many millennials wanna get their hands dirty doing skilled labor.
@@ICOWBOYIM also most shops trying to low-ball employees
@@JuanHernandez-ub3ez YES, that is also very true. As a retired industrial mechanic/machinist/ welder I have personally experienced that too. But then I never had a problem finding a job, repairing or building my own equipment either. I value that self worth highly when I look at the shop labor rates ($75.) and trying to keep things running, put food on the table and paying bills. What do millennials do to keep their things running... pay, pay, pay?!
Какой калосальный труд был проведен. Уважение и благодарность людям за трудолюбие! И какой результат ошеломительный.
Can you imagine what it was like when this guy heard the sound of the first engine he rebuilt? Getting this good at this kind of art is a passion.
My great grandfather had a truck almost identical! I used to ride in it! It’s awesome to see new life a come back to it! And come back to almost brand new! With extra added character! Awesome video!
...and the cameraman deserves special mention.
Credit 2 moto surgeons
Credit goes to the tripod
Damn it's nice having a garage. Opens up a world of possibilities
Right? Last motor I rebuilt, I was practically having to do it outside, with only a Harbor Freight tarp garage to provide a little protection.
Not really its a head full of headaches
@@iamasmurf1122 if you don't like your shop I'm happy to take it off your hands
@@iamasmurf1122 ok boomer
ygtcbee23 it's cool
This man rebuilding the whole engine is no different from a heart surgeon 👍
But an engine has more parts and takes wayy longer to fix
This was soooooo satisfying to watch
If not better👍👌
@Charles Mc Cathy..... The real difference is can a surgeon bring someone back from the dead? An not after being dead for a minute..... Nuf said both are equally important an skilled
There is one difference,
These guys fixing car when the engine is not running.
Heart surgeon guys fixing people when the ‘engine’ is running.
I'm 77, my dad had a 53 five window. I worked on that many times, including engine rebuilds. Very reliable truck, had it for 20 years. Good memories, thank you.
The job you do of restoring those engine's is a work of art... Such beauty in the craftsmanship. Thanks
who ever is the camera and editing guy, WELL DONE!!
Seriously, those smooth timelapse pans have got to be tricky to pull off.
Exactly, echoed my thoughts, superb photography, excellent editing and a great build, the Cat's Meow.
I know! How the time lapses move too 😒👌
Dudes...Awesome Work...!
@@Mcfc2Rich how you have tutorials there?
Я русский , я водитель грузовика в сельском хозяйстве, и я чётко понемаю то ,что вы делаете. Вы молодцы, ваш труд достоин уважения.
Поддерживаю, но это безумно дорогое удовольствие. Конечно если есть деньги или спонсор то да, делать такое восстановление можно.
школоло
Восхищаюсь простотой и надёжностью тех лет. В боксах чистота и полный набор инструмента. Быв.вод. МАЗ 500.
Loved the clear and practical tips in this video. It’s very informative!❤❤❤❤ 1:12
Просто дикий восторг от сделанной работы.Четко,слажено и качественно.Браво!
Браво этому мастеру.ниразу глаза не отвёл от видео,как зачарованный смотрел.восторг
Straight 6's used to be pretty common back in the day... strong running engines too! Good to see the straights getting some love!💪👍
Tower of power?
straight six been getting love all this time. 2jz is a straight six and they call it the v8 killer.
Hitting the starter and just hearing the engine turn over, took this ”50's boomer" back to my early teenage days.
Thanks for the memories and a very well done video.
Настоящая работа мастера старой школы. Хорошо, что такие люди ещё есть, на них держится мир.
In 20 years there probably won’t be anyone left that can do this work.
The production quality is insane.
Also the project of restoring this engine. 😲
I honestly can't imagine 60 years from now anyone would say, "oh yeah, I'm restoring my 2015 Tesla." This is absolute art.
Someone will, gotta remember that when this truck it was just a truck, nothing special
You will see some guys spending most of their time with a computer. In 20 years all the electronics will be obsolete and impossible to recreate it would be like rebuilding a 1970 computer and you will miss all the software. So actually concerning.....
Plastic print
Lol, check out rich rebuilds if you want to see some tesla restoration magic
Cars;
- everybody wants it, people buy it new
- people buy it used
- it’s too old, yet not old enough to be cool. People throw it away because nobody wants it anymore
- it’s old af, people will rebuild and restore it
- it ends up being worth silly money, often more than it’s original retail price
Never lose your camera guy. What a solid lad.
Fantastic video! This popped in my feed and is one of the best videos I've seen on TH-cam
Time lapse and stop "animation" was amazing... great editing and sound track.... freaking fun to watch...
What an amazing job!! Just cant beat the sound of those old engines!! I love the fact that it was done correctly and 100% original!🙌🙌🙌🇺🇸
Sometimes my bike chain falls off and i can’t get it back on
Kyle Carson epic comment
Dead
ha ha ha
Get a new bike it can't be fixed....says the bicycle shop.
If that happens to you, remove the master link that holds the 2 ends of the chain together. Then hang the chain by one end and make sure it is not bent. If it doesn't hang straight it's bad and should be replaced or repaired i.r. grind off the pin heads and punch out. Remove the bad links and replace with more master links. Then put the chain back on to the sprockets (priorly inspect sprockets for quality and alignment too) and bring it under tension with the pedal. You should then be able to join the 2 ends of the chain together enough to replace the master link. You could do that with help of a small pionted tool driver or a pocket knife type of multi-tool to remove and install the master link clip. Good luck 🍀
I gotta say this has been the most entertaining rebuild I've seen so far.
Better than sex
Darren Keen not quite better but definitely close lol
Sinclair really awesome!
@@nickwebb9937 🙏 lol indeed brother
You guys are real masters at your craft!
That older gentleman was like a surgeon but for metal.
This was amazing.
This by far has been THE GREATEST CONTENT IVE SEEN EVER !
This is art. I am a video editor for 15 years and I give huge respect the videographer. Mad respect.
This is the most epic teardown and rebuild that I've ever seen! Completely captivating! Nice work!
the best channel for engine rebuild porn on youtube.
Couldnt say it better . Lol
i wouldnt mind if they didnt do this kind of editing but its pretty cool
@@dinobot_maximize If you look on their channel they do build update videos which go through everything in a raw kind of way
honestly, if they upload this on pornhub, i'm not even mad
@@dinobot_maximize the editing is so cool
I really appreciate these time lapse videos. I understand how long they take to film VS just putting the engine together and it makes it great fun for all of us
My girlfriend and I were walking down her street one day and we saw one of these, it was in great condition and bright red. Now she’s not a car or truck person, but she actually said she thought it was a pretty awesome truck. I think I’ll buy her one some day,
That two merged scenes when he was assembling pistons and drinking coffee at the same time were super awesome! Keep it up guys👍
About as close as we're gonna get to going back in time and hearing one right off the lot. Such great work.
Как все красиво происходит с нужными станками и инструментами . Супер
Да, только нормальной мойки не увидел
Поддерживаю, старый древний мотор, оживили и превратили в сисю, да ещё и электробензонасос поставили на карбюратор, приятно смотреть
Тут еще как бы к месту анекдот про фотографа и кастрюли. Инструменты у мастеров хорошие спору нет, но вот без таких мастеров это груда металлолома. Если человек рукожоп, то и хорошие станки его не поправят. Автор канала и его коллеги из золота.
I like turtles!
Wonderful video! I loved the time lapse. Great editing of both sound and video. From a car guy perspective I appreciate seeing someone restore the stovebolt as apposed to sticking a 350 in it. I recently got a pair(49 and 51) of old Chevy trucks and can't wait.
❤️❤️😊
Watching this rebuild was so satisfying!
Engine rebuilding is a dying art. New generation cars are made to be disposable. The engines are becoming less rebuildable with the use of cheap metals and materials. They are making them where it almost makes no financial sense to rebuild, instead to just replace altogether.
Engine rebuilders are in demand as the older guys are retiring.
I just love seeing the motor worked on from Rust to back to it’s glorious days when it’s a Lean and Mean old school Machine. 💪🏻👍🏻
Me too, I wish we could recycle all the engines in the junk yard not only better than today's engine also solve many problems as pollution and be good for the environment.
Stopped the vid before halfway because I was so impressed with the edit and had to say so... great job!
This is an awesome, totally awesome production. Wow. Each and every step covered, in a great and precise way. Wow. Sat in awe here of not only the job done but the filming.....
That is the Lord's work right there. Bringing these classics back to life, makes those who designed and built them, look down on you with smiles.
This is just wonderful and satisfying to see another classic vehicle rescued!!
Long may your great work continue... God bless you!!
That was an excellent show, in presentation, camera use, and especially the music. Absolutely nailed it! In school we would call this made by the talented and gifted.
The amount of knowledge, experience, time and sacrifice behind this is incredible. Hats off to all the people involved in this project!
With the proper knowledge, pride of workmanship, tools and equipment, a project like this is a pleasure.
I've seen backyard guys try an prep the head gasket surface with an angle grinder....
Jim Hallal Yea...or shave the heads down with sand paper!!
OUCH! 😬
@@glenturney4750 ouch and them some
Love the video! But the the amount of effort and skill in the filming of this was on another level amazing work 👏💯
These guys are the absolute best, they leave no bolt unturned, wish i was able to let them restore my 54 F100, great job guys!
I keep coming back and watching this like every other month for a year now!
I think this is the coolest video I've ever seen. Unreal how smart people are!
And equally how dumb people are
What a great video. I love the simple older engines and their desire to run. Great job fellas!
That had to be one of the coolest engine rebuild videos I've seen so far and a little six-cylinder finally got the photo opt deserved lol
Newest Redline Rebuild is LIVE! Check out our Honda Trail 70 motorcycle restoration: th-cam.com/video/oeX-JC5yUMc/w-d-xo.html
Your mobile number please
Одновременно сложно и красиво!Очень красиво!специалисты своего дела👍
@@محمدبنجبر-خ9ع . Mmmm mmmm lin tudi
@@TestTest-sl7dd 😁
Highlight of rebuild videos
How can there be so many dislikes. This is so cool.
The number of idiots on the internet NEVER surprises me anymore.
SERIOUSLY WHYYY
jealousy
Fat fingers
Because, 27M views. There's that many Chinese troll bots working over time.
Whoever directed the editing is on a whole new level
As someone who has zero mechanical skills I find this to be like brain surgery.
ziggy morris All the most knowledgeable mechanics with vast experience and room sized tool boxes, at one point, also had zero mechanical skills.
@@rykerhayward8606 yup. Before I studied automotive engineering I only had a vague idea of an engine (pistons, crankshaft, valve rods, camshaft, sparkplugs, that was about it), but now this video looks like a reasonable project
@@timbroski4487 have u ever heard of Studebaker well I got a 1950 2r5 thats been sitting for about 20 years now and im trying to get it running i think imma have to do this to it 😂 just wish I knew what I was doing all the time
@@hollowsquad901 first motor I messed with was a 350 out of a 79 Chevy Bonanza big 10 I was 13 my dad threw a Chilton book at me and said see ya, I had no fucking clue what I was doing 🤣🤣🤣 I wish I still had that truck though 😣 she was ugly but my God!!!! Did she get nasty lol
For context, are you a neurosurgeon?
Wow! This is really something... outstanding job. Really like the time lapse photography...great work on the motor, great production values... this puts a lot of mainstream commercial shows to shame!
The production quality on this was just frickin astounding. Great job
Auto building in America used to be an art ! It's nice to see some traditions are still holding on!! Great video!
The paint job on the engine is beautious!
How about the completed truck ??
This by far the best timelapse I've ever seen 🙌🏾🔥🔥🔥
What a wonderful sound when it fired up. I have one about twenty feet from me in the garage that hasn't run in 45 years. Makes me want to start it! ❤ Thank you!