@@jayfletcher8936 , The one who can do it better himself has admitted the right to point this out. However, and in public space, in my opinion, it is quite legitimate to point out something that is obviously wrong or incorrect, regardless of whether the person has proven it himself to do it better. Because constructive criticism, if formulated politely, can only help everyone. It is important to make up your mind and not accept everything willingly! Always and in all areas of life!
This was in no way a restoration. In fact, it is a FAIL. Removing and reinstalling the old rubber simply ensures leaking. Painting the case makes it harder to shed heat. All that was done here, only shortens the life of the unit. In a professional shop, even a simple cleaning includes seal replacement, which was also not done here. A restoration comes with a long list of parts to be replaced.
I viewed this expecting a complete overhaul. Well, these guys have just cleaned the exterior, no checking.of.end float, renewal of bearings, thrust washers, gaskets etc.... This transmission is no better of than when they started. In my humble opinion, an utter waste of time and effort. What have you proved that you can clean and put togther an assembly!!! what a joke.
Oms guys thank you so much. My toyota hilux gearbox 4the gear is f..ked. Ill clean it up and put it back. You saved me so much money. Keep on with the good work👍😃
Love Japanese manual transmissions. My 2006 Nissan Frontier manual transmission still shifts like a dream. When I heard Nissan executives got rid of them, I told Nissan I'm getting rid of them and going back to Toyota who still makes them.
RIP to the meaning of "Restoration", this was just a cleaning, nothing more, there's no checking of bearing or synchronizer, and most is the gears, good cleaning but not a restoration
Русский комментарий, осуждающий покраску внутрянки коробки из баллончика и сборку на старой рваной прокладке. Это только то, что я заметил своим обывательским взглядом. Плеваться хочется.
Ну да ну да нахй эти подшипники менять, главное помыть тогда и работать как новая будет, даже не смотря на то что она горела так не происходит же никаких изменений структуры металла, главное помыть с Фейри! Давно такого бреда не смотрел
Все стало понятно когда чел начал откручивать гайковертом с головками не срывного типа) Ещё и через удлинитель обычный из набора) Орнул знатно, смотреть дальше гайковерта не стал и так все понятно)))
Надо название Угарный ремонт коробки. Что она с горевшей машины эт понятно. Такое ощущение ,что ее разбирали раза три. Я тоже до последнего ,думал то что все ремонт коробки. А тут мойка в порошке корпуса. За чем-то главную пару ,было мыть. И так подшипникам уже каюк. Еще и бинзинчеком помоем. Высушили все . А еще одно ,прокладки бензином им же трандец,она и так дубовая они еще ее помыли. 😄😄😄😄😄😄
This was somebody cleaning a transmission and leaving brush bristles inside of it. Also you should not paint the transmission after cleaning. The video is really not titled correctly as the bearings,seals and other wearable parts were not replaced as would be in a proper stock rebuild or restoration. Good try though as everybody starts someplace and will learn as they progress.
Ну видимо да. Подшипники судя по цветному окрасу перегретые. Дефектовка не сделана, разобрали, грубой корщеткой все зачистили, даже посадочные места, герметик при сборке только в одном месте помазали, и то чуть ли не пол тюбика. А вообще в начале видно что коробка со сгоревшей машины
But see it’s not terrible to him. Now he’s got a clean good looking transmission that someone will buy off of them. Plus to him it is fun to do these things
@@Radionut Yeah I know. Everyone likes shinny machines. Though it is misleading to call it "Restoration". I feel bad for anyone who would buy it. They would end up with a whole lot of headaches a few km/mi down the road.
I didnt catch the name of the micrometre? what was it? , How much ware was on the baulk rings? they are made of bronze so they ware evenly?. How was the fork fingers?. Did you pre-load any of the bearings?. at least they had some freebies! extra burs you left them on the flats. I didnt see a torque wrench used anywhere. But at least its clean and shiny
Nice cleaning and washing of an old transmission, but really, really far from being a restoration, in fact if you put it back on a vehicle most likely would fail soon. For ckeaning a trnsmission you dont need to disassemble it, washing and cleaning is on the outside surface.
This is not a restoration, in fact all the components and mechanism inside were already in good condition..Cleaning of outside casing was enough, which you did :)
Os Srs deram uma aula sobre como pintar o Câmbio, mas também deram uma aula sobre oq não fazer. Não desmontaram o câmbio, não trocaram os anéis sincronizados, não trocaram os rolamentos mais importantes, não trocaram as juntas e não trocaram a trava da 5° marcha. Coitado de quem comprar este câmbio.
Tearing and assemble gearbox on the floor?👀 Thousands of sand and dust get in it freely 🤣 No part was replace.. No gasket.. Just wash and paint it and we good to😌
@@ануарануар-т8у сколько я уже коробасов перебрал с нашего автопрома .. классика , заз , луаз , 2108 , раздатка нива.. еще кучу редукторов .. и все это было в толстом до 1,5 см слое масла с землей ..так что я знаю что такое отреставрировать кпп
Japnese & Korean manual gearboxes like Honda , Toyota, suzuki , Hyundai - Kia made are the best in the world. They don’t cause transmission loss of power like other brands. Because of that the horsepower & torque measured on Crank is transferred to wheels without any major loss like other car brands
I've seen a few of these uploads now, I think the title would be more accurate if it said, Deep Clean Gearbox,, Restoration usually requires atleast one new part.
For years plus of doing this stuff one of my favorite things to do when I had a chance and access was to steam clean everything or pressure wash everything drain everything out and put kerosene in it and run it and wash it out then when you take it apart it's all clean when you pressure wash it it's all cleaned off too many people on TH-cam waste time with screwdrivers wire brushes and scrapers and air tools with discs on them get the grease off first especially some of these TV shows where they're using drills and wire wheels when they're doing restoration they're spending hours and days when all you need is a high-powered pot pressure washer to blast everything off rather than scraping and scrubbing and hand wire brushing and wire Wheeling with a drill I did this crap a long time ago I'm just not the lucky one to have a shop given to me by my parents
@15:08 using the old broken gasket...feel bad for whomevers car that's going in. I'm no expert, but most mechanics I know don't rebuild transmissions bare foot...
Пиздец, до последнего ждал когда же поменяют хоть посиневший подшипник, или хоть сальник в хвостовике, а помыть и покрасить трудно назвать реставрацией
No soy partidario de pintar las cajas de velocidades. Con el tiempo su aspecto se deteriora mucho porque la pintura se descascara y al limpiarla se nota cada vez más. Es mejor su tono de aluminio o acero limpio.
Ma come lo hai revisionato, ottimo l'impegnio ma lo hai solo lavato hai lasciato i cuscinetti vecchi, li dovevi sostituire gli alberi non sono stati controllati e gli ingranaggi avevano la ruggine......risultato discitibile
I can guarantee the transmission was better untouched. Makes you think twice about purchasing rebuilt/restored transmissions. Looks new from outside, absolutely nothing repaired inside besides replacing parts where they belong to. Great idea actually for a quick flip, but an absolute disservice to the person who will be using that transmission.
Она где-то лежала и гараж горел либо снята с горелой машины. При чем давно, даже масло всё выкипело и всё заржавело. Собрано конечно с грязью. Сожрет там всё со временем. Болты видно что сорваны до этих чудо мастеров раз сто.
Это не реставрация, это создание видимости, аля перекуп стаил... Старые просто отмытые запчасти, как тут уже написали новых запчастей таких как сальники, подшипники, синхронизаторы просто непоставлены так как не дефектовалось ничего... Так показуха для просмотров
3rd world repairs, 3rd world performance. Not a single bearing or seal replaced, paint on gasket surfaces, no torque wrenches used during reassembly...yeah this won't end well.
It’s like they learned from a LEGO set. Restoration should be replacing old worn parts and not taking it apart and building it again with the same old parts.
So u just cleaned it and painted it... Great job. Next time change bearings, synchros and seals
You save me 15 minutes thanks!!
Not to mention when he painted it he got inside the case was this a video on how not todo it?
L
Make your own channel and see how much success you have and let others do what they please
@@jayfletcher8936 , The one who can do it better himself has admitted the right to point this out. However, and in public space, in my opinion, it is quite legitimate to point out something that is obviously wrong or incorrect, regardless of whether the person has proven it himself to do it better. Because constructive criticism, if formulated politely, can only help everyone. It is important to make up your mind and not accept everything willingly! Always and in all areas of life!
This was in no way a restoration. In fact, it is a FAIL. Removing and reinstalling the old rubber simply ensures leaking. Painting the case makes it harder to shed heat. All that was done here, only shortens the life of the unit.
In a professional shop, even a simple cleaning includes seal replacement, which was also not done here.
A restoration comes with a long list of parts to be replaced.
Also reusing the rounded off bolts which looks like it happened from buffing them. Not replacing bearings which should always be done as well.
Painting without covering, No checking gear part properly, Re-using old bolts & gasket... XD
قصققثقث
Not only that but 2k likes..... I hope that thouse who like it dont do the same thing 😅
Restoration is different from Rebuilding
Rename the title
"detailing a gearbox"
А смысл было разбирать? Нужно просто было покрасить. По босым ногам можно сразу было догадаться что к чему
Чтоб замылить глаза (пусть буржуи попробуют перевести это выражение)
Согласен, где же тут реставрация... помыли, покрасили🤣🤣🤣
Щупальцы запустили ,хана коробке.мосло поменяйте и все
@@АлесейЛеонидович-о6щ Ну да, это не реставрация, а ТО (техническое обслуживание).
@@don_Alonso_di_Almeyda_i_Valdes это шляпа полная, а не ТО!!! Замылили глаза и покрасили! Для ТО, там надо кучу всего поменять...😉
18 minutes on how not to rebuild your transmission.
It’s not rebuild, they just wash it
@@shadipost and painted also! I don't know why they don't cover all gears with black... It might be black edition
@@shadipost They didnt clean it properly either. They left brush bristles inside of it.
Вы в следующий раз просто в стиральную машину положите деталь и она станет новой ,только порошка побольше
подщипники даже не поменяли.а им не известно сколько осталось
А зачем их менять! Ведь самое главное правило таких реставраторов - это все разобрать и помыть в мыльной воде!
Думаю тупа надо было на просмотры собрать и то думаю что человек в кпп не разбираться
@@сергейскрынников-у4щpp
From iraq well done good job
I viewed this expecting a complete overhaul. Well, these guys have just cleaned the exterior, no checking.of.end float, renewal of bearings, thrust washers, gaskets etc.... This transmission is no better of than when they started. In my humble opinion, an utter waste of time and effort. What have you proved that you can clean and put togther an assembly!!! what a joke.
Actually, it is worst than when it was dirty. They did a shit of work.
Totally agree. Bearings and thrust washer was the first thing I was waiting for after the clean but just got thrown back together
Thank you, my dear brother, I wish you safety, wellness and success in your blessed work
This is how customers are cheated in the name of rebuilt transmission.
Lmao
Hopefully they do not sell it as rebuilt,restored or even as good but just as is.
Ни сальников ни прокладок при реставрации не меняют?
Excelente travajo de recontruccion saludos desde panamá👍🇵🇦👌🙋♂️
Суть реставрации в том что её разобрали и помыли? 👎👎👎
нет конечно, поверх грязи краску нанести и спилить грани болтов.
Фуфлыжники
@@КириллКириллов-м4м а чего большего ты хотел? это ж коробка от ТОЙОТЫ
Вы многа болтаете
А потом на авито: "...в отличном состоянии, без пробега по РФ..." )))
...От сгоревшей тачки...
Скорее без пробега по пакистану))
Oms guys thank you so much. My toyota hilux gearbox 4the gear is f..ked. Ill clean it up and put it back. You saved me so much money. Keep on with the good work👍😃
Зачем было разбирать если не менялись подшипники и прочее.С таким успехом можно было помыть и покрасить собранную.
Love Japanese manual transmissions. My 2006 Nissan Frontier manual transmission still shifts like a dream. When I heard Nissan executives got rid of them, I told Nissan I'm getting rid of them and going back to Toyota who still makes them.
What did Nissan say
Не одной прокладки не сальника не заменили .
Прокладки, сальники, подшипники без замены помыли в бензине и обратно поставили 😁
Так это же тойота 💪🏻
@@НикитаДьяков-о2п мыли не в бензине, а в супротеке) резинки мягче, а подшипник обратно в себя зарос и стал новым)
@@Nuremberg менять нужно краску с балончика
RIP to the meaning of "Restoration", this was just a cleaning, nothing more, there's no checking of bearing or synchronizer, and most is the gears, good cleaning but not a restoration
Главное в реставрации - побольше порошка и покраска из баллночика. Сальники им новые подавай, ещё чего!))
Эта коробка, походу без реставрации этой дольше бы ходила)))
Русский комментарий, осуждающий покраску внутрянки коробки из баллончика и сборку на старой рваной прокладке. Это только то, что я заметил своим обывательским взглядом. Плеваться хочется.
Ну да ну да нахй эти подшипники менять, главное помыть тогда и работать как новая будет, даже не смотря на то что она горела так не происходит же никаких изменений структуры металла, главное помыть с Фейри! Давно такого бреда не смотрел
Главное, чтобы пакли с краской не было! А фейри я переживу!🤭🤭🤣🤣🤣
Yup it's a toyota clean inspect reasemble. No need to install modern Chinese seals.
😱😱 WHY?!? Why go through all this work if you’re just going to make it worse than it was before?? 😲😲
Керхером сразу нужно было помыть и нормально было, реставрация
This is only a disassembly, cleaning and reassembly
Все стало понятно когда чел начал откручивать гайковертом с головками не срывного типа)
Ещё и через удлинитель обычный из набора)
Орнул знатно, смотреть дальше гайковерта не стал и так все понятно)))
Надо название Угарный ремонт коробки. Что она с горевшей машины эт понятно. Такое ощущение ,что ее разбирали раза три. Я тоже до последнего ,думал то что все ремонт коробки. А тут мойка в порошке корпуса. За чем-то главную пару ,было мыть. И так подшипникам уже каюк. Еще и бинзинчеком помоем. Высушили все . А еще одно ,прокладки бензином им же трандец,она и так дубовая они еще ее помыли. 😄😄😄😄😄😄
There is still literal rust on the gears. That gearbox looks "pretty" on the outside, but inside its junk!!
My friends, top and Galaxy Very good 👏👏👏👏👏
А где новые подшипники, шестерёнки, синхронизаторы?
Вы разве не знали что мыльная вода восстанавливает износ всех деталей ?
@@ПВЛ-щ9ч 😂😂😂😂😂
Разобрал рабочую коробку и помыл её 🙈
This was somebody cleaning a transmission and leaving brush bristles inside of it. Also you should not paint the transmission after cleaning. The video is really not titled correctly as the bearings,seals and other wearable parts were not replaced as would be in a proper stock rebuild or restoration. Good try though as everybody starts someplace and will learn as they progress.
👍👍
нахер вы ее разбирали? что бы с баллончика покрасить?))))))))))))
Ну видимо да. Подшипники судя по цветному окрасу перегретые. Дефектовка не сделана, разобрали, грубой корщеткой все зачистили, даже посадочные места, герметик при сборке только в одном месте помазали, и то чуть ли не пол тюбика. А вообще в начале видно что коробка со сгоревшей машины
И покрасили то на грязь
Класс и на болтах грани слизаны!
Did you bury this gearbox then dug it out for this video?
All that trouble just to "Clean" an old transmission.
But see it’s not terrible to him. Now he’s got a clean good looking transmission that someone will buy off of them. Plus to him it is fun to do these things
@@Radionut Yeah I know. Everyone likes shinny machines. Though it is misleading to call it "Restoration".
I feel bad for anyone who would buy it. They would end up with a whole lot of headaches a few km/mi down the road.
Нет ребят,это уже слишком!!!кто им дал это чудо МКПП и второе-как,как довели его до такого состояния
I didnt catch the name of the micrometre? what was it? , How much ware was on the baulk rings? they are made of bronze so they ware evenly?. How was the fork fingers?. Did you pre-load any of the bearings?. at least they had some freebies! extra burs you left them on the flats. I didnt see a torque wrench used anywhere. But at least its clean and shiny
Would have sandblasted the outside and painted it no need to dismantle
You forgot to show the part where you filled in with 90 weight gear oil... And sawdust, lol.
painting transmission is a better name for video
Good job ,
My man cleaning parts like dishes 😂
klo di indonesia pakai air accu zur buat menghilangkan kerak oli nya . ga capek pake gerinda begitu 😅😅😅
Nice cleaning and washing of an old transmission, but really, really far from being a restoration, in fact if you put it back on a vehicle most likely would fail soon. For ckeaning a trnsmission you dont need to disassemble it, washing and cleaning is on the outside surface.
This is not a restoration, in fact all the components and mechanism inside were already in good condition..Cleaning of outside casing was enough, which you did :)
Os Srs deram uma aula sobre como pintar o Câmbio, mas também deram uma aula sobre oq não fazer.
Não desmontaram o câmbio, não trocaram os anéis sincronizados, não trocaram os rolamentos mais importantes, não trocaram as juntas e não trocaram a trava da 5° marcha. Coitado de quem comprar este câmbio.
Inputshaft and counter shaft bearing need to be replaced.
Good job 👏🏽👏🏽👏🏽
Did you check gears for ware and did you put new seals in?
Реставрировать там особо нечего было, почистить и покрасить. Но парни молодцы, дали вторую жизнь забытому агрегату.
То есть помыть агрегат внутри и с наружи, это реставрация?????
Tearing and assemble gearbox on the floor?👀 Thousands of sand and dust get in it freely 🤣 No part was replace.. No gasket.. Just wash and paint it and we good to😌
Колхоз на коленках😝👎У меня стиралка крутится , и то смотреть за ней прикольней
В каком месте это реставрация? Это даже переборкой не назовешь .. даже дефектовки наверняка не было .. просто придали товарный вид
Вы сами так папробуйте
@@ануарануар-т8у сколько я уже коробасов перебрал с нашего автопрома .. классика , заз , луаз , 2108 , раздатка нива.. еще кучу редукторов .. и все это было в толстом до 1,5 см слое масла с землей ..так что я знаю что такое отреставрировать кпп
Muito bom, ficou novo! 👍
thank you
Это просто чистка, но никак не реставрация!
А в чем собственно заключался ремонт и реставрация? Помыли и покрасили.
Japnese & Korean manual gearboxes like Honda , Toyota, suzuki , Hyundai - Kia made are the best in the world. They don’t cause transmission loss of power like other brands. Because of that the horsepower & torque measured on Crank is transferred to wheels without any major loss like other car brands
А понял! Помыл и покрасил - это реставрация КПП)
I've seen a few of these uploads now, I think the title would be more accurate if it said, Deep Clean Gearbox,, Restoration usually requires atleast one new part.
Craigslist rebuilt gearbox XD XD But to be fair its a great video none the less for people that want to work on their own 21R gearbox.
What I saw was, how to repaint and clean🥴🥴🥴🥴, not rebuild...
For years plus of doing this stuff one of my favorite things to do when I had a chance and access was to steam clean everything or pressure wash everything drain everything out and put kerosene in it and run it and wash it out then when you take it apart it's all clean when you pressure wash it it's all cleaned off too many people on TH-cam waste time with screwdrivers wire brushes and scrapers and air tools with discs on them get the grease off first especially some of these TV shows where they're using drills and wire wheels when they're doing restoration they're spending hours and days when all you need is a high-powered pot pressure washer to blast everything off rather than scraping and scrubbing and hand wire brushing and wire Wheeling with a drill I did this crap a long time ago I'm just not the lucky one to have a shop given to me by my parents
Lindo trabalho parabéns.
Nice W154 gearbox.
It’s a w58
@15:08 using the old broken gasket...feel bad for whomevers car that's going in. I'm no expert, but most mechanics I know don't rebuild transmissions bare foot...
Excellent 👌
that rubber seal were the shifter is to old to put it back on it but great video
ma dudes change the seals at least
Пиздец, до последнего ждал когда же поменяют хоть посиневший подшипник, или хоть сальник в хвостовике, а помыть и покрасить трудно назвать реставрацией
I can smell the gas you used to clean the parts with 😂
Dude crank that gun good video
Good afternoon congratulations, for the video, excellent work
My transmission is the later version it must me as the stick is not over the yoke connection.
Thanks for a great how to video on genuine JDM quality.
Floor striper would get every bit of drit and grease mixed with water of course
now you can put it in the cart, to guide the horses
This thing looks good but it’s gonna leak hella more than it did before
No soy partidario de pintar las cajas de velocidades. Con el tiempo su aspecto se deteriora mucho porque la pintura se descascara y al limpiarla se nota cada vez más. Es mejor su tono de aluminio o acero limpio.
Is that a is300 manual transmission
Ma come lo hai revisionato, ottimo l'impegnio ma lo hai solo lavato hai lasciato i cuscinetti vecchi, li dovevi sostituire gli alberi non sono stati controllati e gli ingranaggi avevano la ruggine......risultato discitibile
Waste of time, if you're not change bearings and seals...
Так называется ремонт с точки зрения маркетолога!
No need to disassemble for visual repair.
Perfection to the core! Well done!
pressure washer boss
I can guarantee the transmission was better untouched. Makes you think twice about purchasing rebuilt/restored transmissions. Looks new from outside, absolutely nothing repaired inside besides replacing parts where they belong to. Great idea actually for a quick flip, but an absolute disservice to the person who will be using that transmission.
Ficou zerada.👏👏👏👏🇧🇷
Is it totota 1C engine s gear box
Please reply
Bcoz this gear box in my car
So I want to know about the gear box
Keren, salam dari Indonesia
Good job
good for nothing! just cleaning!! new bearings????? new seals????? just paint paint paint!!!!!!!!!!!
where is the restoration? all i see is strip and clean
Classic Asia. Working on the ground.
Lol yeah, I swear they don’t own work benches over there.
Она где-то лежала и гараж горел либо снята с горелой машины. При чем давно, даже масло всё выкипело и всё заржавело. Собрано конечно с грязью. Сожрет там всё со временем.
Болты видно что сорваны до этих чудо мастеров раз сто.
Это не реставрация, это создание видимости, аля перекуп стаил... Старые просто отмытые запчасти, как тут уже написали новых запчастей таких как сальники, подшипники, синхронизаторы просто непоставлены так как не дефектовалось ничего... Так показуха для просмотров
Новая!без пробега.
3rd world repairs, 3rd world performance. Not a single bearing or seal replaced, paint on gasket surfaces, no torque wrenches used during reassembly...yeah this won't end well.
It’s like they learned from a LEGO set. Restoration should be replacing old worn parts and not taking it apart and building it again with the same old parts.