Hello sir, it wars really a great tutorial Can you please tell me is there is any gap between tool and job Or they ae just touched or toll is penetrated in job?
Hello. And could you send me the finished work "Friction Stir Welding"? I want to see how it all works, and I need a finished model for the Abaqus program. Thank you in advance.
Hello, Very good simulation. How much was the computational time to simulate? Please let me know.. I had tried this CEL approach & it is taking me 1 week to just to simulated for 2 seconds after that it doesn't show increment in step time..
Greetings sir, i'm a UNDERGRADUATE student working on my FSW machine setup. Sir i face a problem in this simulation. I copied your tutorial step by step but in the end it shows error that fsw tool is not meshed properly for some reason. I tried 4 times but still got this error . Please help me.
Hello sir, it wars really a great tutorial
Can you please tell me is there is any gap between tool and job Or they ae just touched or toll is penetrated in job?
Initially there is a gap, then the tool moves downward and penetrate the job at appropriate depth
Sir, is shoulder just touching the work or it is inserted too. Please tell.
thank you sir for the clean presentation
Great video sir, can u help me in the analysis of friction stir spot welding?
ok
Great work. Do you have an idea about EDEM-ANSYS Fluent coupling for friction stir welding?
Thanks so much for your efforts
Is it possible to get a PDF file for this case study ?
Not, yet
Great video! Just a small question, can the same analysis be done in Ansys too? If yes which package will be appropriate?
Sure! It is possible! It is possible by Ansys fluent but I prefer ANSYS APDL
@@Abaqus-Tutorials How can simulate on Ansys Please suggest
could you please upload part2 video?
hello just I wanna know how did you calculate the time period please?
Sir have you used any subroutine codes using FORTRAN etc in this abaqus analysis for heat flow
How Did you created partitions or offset face for seperating welding region
You can in different method, example, 3 point method
re bhai cursor use korte ki hoy??
Is it possible to get a PDF of all the material properties and model parameters?
Not, yet
Dr i want to do simulation on Abaqus please 🙏 guide me from where to start . I have no idea about this .
Waiting for your response
Sir can you share your thermal stress values with me. It will be very helpful.
Hello sir, what is unit of specific heat that you have entered here?
SI unit
Hello. And could you send me the finished work "Friction Stir Welding"? I want to see how it all works, and I need a finished model for the Abaqus program. Thank you in advance.
The finished work is almost similar to the video
Hello, Very good simulation. How much was the computational time to simulate? Please let me know..
I had tried this CEL approach & it is taking me 1 week to just to simulated for 2 seconds after that it doesn't show increment in step time..
In my case it took not more than 3days in 8ram computer
@@Abaqus-Tutorials and processor ?
thanks
Dear brother, it is quite interesting and you have demonstrated very well. can you write your contacts ? so that I can contact you.
CAN U PLEASE PROVIDE SOFTWARE LINK FOR INSTALLATION
go to getintopc.com
how can assign the interaction between the pin and the plate?
That is general interaction, follow all 3 parts! This video is one of the 3
That is general contact. Follow each steps in all 3 videos
The unit of conductivity is W/(m.K) but you are working in mm so why you did not change it to W/(mm.K)
it's changed.
That would be mW/mmK
At minute 9:01, do you mean tonne/mm3 instead of kg/mm3 ?
The value of 2.7e-09 corresponds to tonne/mm3 unit.
Can you please clarify the units used in this video in the description ? Thank you.
Dear Dr,
Could you please tell me why you choose 875000 for specific heat capacity of steel
In similar unit like other parameters! In your case you can customize based on your material
Greetings sir, i'm a UNDERGRADUATE student working on my FSW machine setup. Sir i face a problem in this simulation. I copied your tutorial step by step but in the end it shows error that fsw tool is not meshed properly for some reason. I tried 4 times but still got this error . Please help me.
Create mesh by creating proper partition, or change mesh type and mesh size
From where you get values of Fsw ?
Do you mean temperature value?
@@Abaqus-Tutorials yess
@@alokvikas2487 Check the "Nodal temperature" in field output request
Is ti possible to perform this simulation on ANSYS with plunger.
Definitely ! it possible and you can do in either APDL or Fluent
@@Abaqus-Tutorials Many videos are available on TH-cam but no. One Showed weld tool with plunger in simulation. Only frictional heat simulation
Is possible to do so?
@@sahilgupta9675 I was tried in ANSYS fluent a couple years ago, and I know it is possible!! try in fluent
Can you make video on this topic on ANSYS to guide
How to simulation the rocket impact and explopsion? Please help me. Thank so much
I will upload about it
@@Abaqus-Tutorials thank you so much
How can we get the CAE file of this simulation
Mostly, not working due to it may corrupt or different version
@@Abaqus-Tutorials I need the file for project work ,as it is similar to mile project .can we get connected on Gmail.
Don't just some parts while uploading the video ,it's creates confusion
Ok, Thanks!