Thanks for the info! I'm running the Vanquish trailing arms on mine as well. However, for those that may not want to spend the $$, if you fill the areas shown in the video, with the two "X" shaped reinforcements, with plastic bond epoxy, you will greatly increase the strength of the factory trailing arms, and eliminate the buckling that normally occurs. Not sure why Axial didn't just make this area solid. But, by solidifying those voids you can eliminate much of the issue. Not to say that the Vanquish arms aren't better, but if on a budget, just filling those voids will go a long way toward making the factory arms stronger.. Just sayin'....
I love your videos. You’re Very knowledgeable !This bomber is one of my favorites. I just spent a small fortune on it. I have about 500.00 in vanquish upgrades. Tekin rx4 esc and tekin roc 412 hd motor tekin t360 servo. Took all screws out and replaced bearings and added stainless screws.I just today purchased an e revo 2.0 after watching your videos. You need commission from traxxas !!!
Hey Travis love the videos you do. You explain everything your doing why you replace the part and how to do it correctly. That’s one of the reasons I watch your videos. Also I’ve owned an e revo witch was my first basher and all it would do is break every time. Finally had to get rid of it and bought an x maxx and never looked back. Love that thing. I’m also into the crawling part of the hobby witch I’ve also built a track for . Keep up the good videos.
@@TNW84 I would NOT get a metal spur gear. There has to be something to burn up first. And the spur gear is cheap at 3.00 ea. It's more of a safety thing so you don't burn up anything else in the tranny. Just get another nylon spur, but the pinyon should be aluminum or metal and put a piece of notebook paper in between the gears when setting your gear mesh, then you won't burn one up. I have a video on just that, here is the link.
hi Travis, I really like your vids on the erevo but all of these crawling vids have turned me off. way too much crawling, it's boring as he'll sorry! but true. I just can't watch them!!!!!!!
Sorry about that, It's just what everyone is into around here. and it's what I have going on at the moment. I made 16 videos on the E Revo 2.0 and i"m not done yet. But, I can't run with just all bashing . I like change, and I had people telling me just what your saying about Crawling with Bashing to much, I can't please everyone. By the way the new videos on the bomber are all about Rock Racing not Crawling! And my channel has grown twice as much with the last 17 videos on crawling over the 16 Bashing videos. Sorry you don't like my content, but I can;t please everyone. I'll tell you what , I'm inviting my club out tomorrow to bash and crawl . I'll dedicate my next bashing video to you Saran! But only if you join my group Upgraded RC bashers Crashers and Crawlers and give me some awesome pics of you Bashing and enjoying it! Thanks for the comment, I'll be waiting for your bashing pics!!!!!
All good Travis its not that I'm unhappy with the content. Anything you have to say is worth listening to and I learnt so much about my erevo 2.0 from you and just couldn't get enough. I totally get you need to diversify to grow and interest a different bunch of people. I'll most definitely check out some of this bomber content and do a new search through your vids! Please don't take my message as just negative crawling is ok and I totally get why people love it. These new rock bouncers seem like z great medium between the two
@@elicarter1356 Who are you calling douch mate. People try to respect each other on here and use conversations with some intellectual comments whether good or bad. Besides the fact you spelled douche incorrectly you just make yourself look and sound exactly like a douchebag. Not attacking you but come on bud, have respect on here or you will lose everybody else's.
@@saransmith8773 Thanks, I appreciate that. I have 2 videos ready to be released soon. and then the very next one or 2 will be on the E Revo, then I am thinking about doing a video with a lot of friends Just Jumping at different locations
This is why your channel isn't growing. I have watched other channels start and overtake you in a matter of months. Crawling just isn't what the majority want! come on
Thanks for the info! I'm running the Vanquish trailing arms on mine as well. However, for those that may not want to spend the $$, if you fill the areas shown in the video, with the two "X" shaped reinforcements, with plastic bond epoxy, you will greatly increase the strength of the factory trailing arms, and eliminate the buckling that normally occurs. Not sure why Axial didn't just make this area solid. But, by solidifying those voids you can eliminate much of the issue. Not to say that the Vanquish arms aren't better, but if on a budget, just filling those voids will go a long way toward making the factory arms stronger.. Just sayin'....
Echo, good videos. When you replace the motor with a brushless change the spur gear with a metal one. I stripped the stock nylon spur.
Good advice, I was planning on that. Thank you Brother!
I love your videos. You’re Very knowledgeable !This bomber is one of my favorites. I just spent a small fortune on it. I have about 500.00 in vanquish upgrades. Tekin rx4 esc and tekin roc 412 hd motor tekin t360 servo. Took all screws out and replaced bearings and added stainless screws.I just today purchased an e revo 2.0 after watching your videos. You need commission from traxxas !!!
Thanks Bud, appreciate your comments. Sounds Like your Bomber is coming along better than mine so far Lol!
Yeah the erevo videos were great but what happened. no erevo bashes just crawling
Hey Travis love the videos you do. You explain everything your doing why you replace the part and how to do it correctly. That’s one of the reasons I watch your videos. Also I’ve owned an e revo witch was my first basher and all it would do is break every time. Finally had to get rid of it and bought an x maxx and never looked back. Love that thing. I’m also into the crawling part of the hobby witch I’ve also built a track for . Keep up the good videos.
Awesome instructions!
Hey I was thinking about adding a 10T pinion on my Bomber after some upgrades that added weight. Think the 35 turn motor would be ok? Thanks
Yes, stock is a 12t pinyon I have run 9t, 11t, and 13t. 10t will be fine. for my next crawling comp, I'm going to run an 8t
@@upgradedrc3697 Very cool. How bout the spur gear? I think I smoked mine the other day, was thinking about getting the metal one.
@@TNW84 I would NOT get a metal spur gear. There has to be something to burn up first. And the spur gear is cheap at 3.00 ea. It's more of a safety thing so you don't burn up anything else in the tranny. Just get another nylon spur, but the pinyon should be aluminum or metal and put a piece of notebook paper in between the gears when setting your gear mesh, then you won't burn one up. I have a video on just that, here is the link.
th-cam.com/video/vRR14ny8euM/w-d-xo.html
@@upgradedrc3697 Perfect! Thank you very much
hi Travis, I really like your vids on the erevo but all of these crawling vids have turned me off. way too much crawling, it's boring as he'll sorry! but true. I just can't watch them!!!!!!!
Sorry about that, It's just what everyone is into around here. and it's what I have going on at the moment. I made 16 videos on the E Revo 2.0 and i"m not done yet. But, I can't run with just all bashing . I like change, and I had people telling me just what your saying about Crawling with Bashing to much, I can't please everyone. By the way the new videos on the bomber are all about Rock Racing not Crawling! And my channel has grown twice as much with the last 17 videos on crawling over the 16 Bashing videos. Sorry you don't like my content, but I can;t please everyone. I'll tell you what , I'm inviting my club out tomorrow to bash and crawl . I'll dedicate my next bashing video to you Saran! But only if you join my group Upgraded RC bashers Crashers and Crawlers and give me some awesome pics of you Bashing and enjoying it! Thanks for the comment, I'll be waiting for your bashing pics!!!!!
doooooouche
All good Travis its not that I'm unhappy with the content. Anything you have to say is worth listening to and I learnt so much about my erevo 2.0 from you and just couldn't get enough. I totally get you need to diversify to grow and interest a different bunch of people. I'll most definitely check out some of this bomber content and do a new search through your vids! Please don't take my message as just negative crawling is ok and I totally get why people love it. These new rock bouncers seem like z great medium between the two
@@elicarter1356 Who are you calling douch mate. People try to respect each other on here and use conversations with some intellectual comments whether good or bad. Besides the fact you spelled douche incorrectly you just make yourself look and sound exactly like a douchebag. Not attacking you but come on bud, have respect on here or you will lose everybody else's.
@@saransmith8773 Thanks, I appreciate that. I have 2 videos ready to be released soon. and then the very next one or 2 will be on the E Revo, then I am thinking about doing a video with a lot of friends Just Jumping at different locations
This is why your channel isn't growing. I have watched other channels start and overtake you in a matter of months. Crawling just isn't what the majority want! come on
doooooooouche
crawling = boring!
dooooooouche