How To Use an Induction Motor as a Generator With Permanent Magnets

How to use an induction motor as a generator with permanent magnets. Don’t spend money on expensive generators to use in your windmill or on any hydro electric project to harvest free energy. It can be an old induction motor from say a swamp cooler or any other induction motor that was about ready to be thrown out. The core of the motor can be modified and permanent magnets can be installed instead to become a permanent magnet generator to harness electrical energy for your house or to store energy in deep cycle batteries for later usage or emergency. Here is one video we made about that subject, we might make another video about the same subject. One thing to point out is that one needs to count the number of coils in the stator and the number of magnets needs to be the same based on the number of coils. In this video, in the rotor a number of smaller magnets are being used to make up a single pull of the motor. The permanent magnets need to alternate: north, south, north, south so that alternating current (AC) can be generated. This is a tutorial on how to use an induction motor with permanent magnets for free energy projects.
Website: mindoftesla.com

[@Emporator]

Awesome. Nicely done.

[@DP-hy4vh]

You can also turn an induction motor into a generator without magnets if you add capacitors to the motor leads and spin it faster than it's rated rpm speed (synchronous speed).

[@vasileroberto1165]

BRAVO MESTERE

[@glennbaxter7254]

Daniel, how do you connect up the wires that come from the copper windings to a plug board? which one goes where? Good video though.

[@carlitomadrona6211]

What can you use the starting coil in that motor after conversion, sir?

[@ArbitraryOnslaught]

Is this for wind or dynapod?

[@teslabrasileiro]

👀🧠 Fantastic

[@traviscamp5345]

I don't understand what happen d to the metal one you drilled out ?

[@overunityinventor]

Nice build!
Please replicate Thane heins bitoroid overunity transformer once.

[@clunkerhulk5448]

Your videos are interesting and I went to your website but why is every simple project you are selling “sold out” and priced like that? Just curious 🧐

[@DanielsInventions]

We want to sell some stuff but we are not sure what direction to go at this time. We know there are a lot of people out there that are working on their own free energy prototypes/patents. We have a lot of different CNC machineries that can cut a lot of very precise parts that are needed for attempting one of these inventions. We were thinking possible and hopefully soon to maybe begin selling DIY kits with parts needed for free energy motors. People could purchase and assemble all of the pieces together and install the permanent magnets and coils and so on. That would be a good start and they could do their testing and experimenting and inventing.

[@tonygau65]

How much power does it produce

[@fuellessgenerator6893]

Can it also run as a motor for low current consumption?

[@skybolt3802]

When we plug in a transformer why is the main coil not "shorting out" and using huge amounts of wattage? Because of resistance?

[@patrickwatkins7572]

almost nothing to do with resistance, IE; if you remove the steel laminations from the transformer and power it up... overheat and smoke in 3 seconds.- - need the steel for inductance, or impedance
and nice try on the perendev geometry. they seem to be possible, however i suspect its because of trickery with the magnets asmuch as the geometry. - eg "effective monopole " creation by using long magnets and making a T shape with 2 of them. - thus channeling the N pole into the center or "null" point of the second magnet.

[@bastelanofboria]

It only works with AC.
DC doesnt work, the transformer will get very hot though🔥

[@skybolt3802]

My thought is how does circuit connection through primary not draw huge current because it's basically a "short." Is this why they moved from ferrous cores to other "electronic components." Otherwise, I could put power on switch to a transformer going to my outside air conditioner. So that induction powers it rather than a straight feed.. actually two transformer. One step up and one step down. Because maybe the draw would appear smaller?

[@user-sd4ij7ko7w]

That’s good Why don''t you make it and start selling it?

[@user-eb8sc7rl2w]

смешение магнитов,уменьшает генерацию.Попробуйте на узких магнитах.

[@rafigrafigdust4825]

nicht machbar.

[@alexanderris7310]

No.ise fake

[@pizzahutgaming8590]

This is as real as it can get. The only thing that is fake is you, you are living in a fake virtual reality. -Samantha from Pizza Hut

[@user-ko2up6tj4g]

LOL 😂😂😂😂

[@timh.2137]

@@pizzahutgaming8590 Alexander is correct this is fake as shit!

[@danielememo9089]

Scusa ... guarda che non hai fatto nulla di strano!! Hai fatto un esercizio di fisica. Non hai inventato nulla. Oppure non sai un cazzo di elettrotecnica (più probabile)

[@romanivancheko3700]

Супер🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝🤝 👍👍👍👍👍👍👍👍👍👍👁👁👁👁👁👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍