TinyHawk S - Start Your FPV Journey!
ฝัง
- เผยแพร่เมื่อ 4 มิ.ย. 2019
- Links to the TinyHawk S will be added as it becomes available.
Emax bit.ly/2WgO8e6
Banggood bit.ly/31bW8Rm Code "Drones6" $93.99
RaceDayQuads bit.ly/2wFMtUZ
Heli-Nation bit.ly/2Xt8KRR
Amazon amzn.to/2WmtZIq
GoodVenturDrones bit.ly/2We2wE1
RotorGeeks bit.ly/2EWp2LL
PyroDrone bit.ly/2HVJiiH
1s Batteries used in this video
Banggood bit.ly/2QQEk9s
RaceDayQuads bit.ly/2QSqgfN
Amazon 4 pack amzn.to/31bmHG9
Amazon single battery amzn.to/2WNBac2
In Canada bit.ly/2WLLQrL
2s ph2.0 Batteries bit.ly/2Wi1dUq
Betaflight Dump as tested bit.ly/2JYDirI
All the stuff I love to use
"Whoop" Batteries
GNB 2s 300Mah bit.ly/2TcQ5az Coupon Code Charger12 --12%off
From Amazon bit.ly/2TP2LFe
GNB 2s 350mah bit.ly/2V1nHZB
From Amazon amzn.to/2IsNiJs
GNB 3s 300mah bit.ly/2TP2LFe
RDQ 3s 300mah bit.ly/2UGL2PI
HM 3s 300mah bit.ly/2W5OzJ9
RDQ 2s 300mah bit.ly/2GtMiTF
RDQ 2s 350mah bit.ly/2Tx9683
RDQ 2s 525mah bit.ly/2Eg1y4l
Banggood
1s 300mah bit.ly/2GbxWr8 Coupon Code Parts8 --8%
2s 300mah bit.ly/2GbxWr8 Coupon Code Parts8 --8%
2s 520mah bit.ly/2S0QSKs Coupon Code Parts8 --8%
RaceDayQuads
1s 300mah bit.ly/2GsaepB
2s packs bit.ly/2DxrckR
RotorGeeks - Canada
\2s 300mah bit.ly/2EFDiJy
TBS 2s 300mah @Heli-Nation bit.ly/2HluxHo
Micro Batteries - I recommend GNB and RDQ
All RDQ Series Micro Batteries bit.ly/2ZsCob5
GNB Batteries
Banggood bit.ly/2PoJglo Coupon Code Parts8 --8%
Amazon amzn.to/2Xw5VPr
GVD bit.ly/2GqOadF
RotorGeeks bit.ly/2vde3bE
Props
RaceDayQuads all micro props bit.ly/2GqfY3b
AirBladeUAV all micro props (Canada) bit.ly/2Dd48Gp
RotorGeeks all micro props (Canada) bit.ly/2StEHdn
Heli-Nation 40mm props bit.ly/2WKevuz
FrSky X-Lite bit.ly/2OLmMdE Coupon Code Parts8 --8%
FatShark HDO amzn.to/2PLm14r bit.ly/2OA1jIi Coupon Code Charger12 --12%
RapidFire Goggle Receiver bit.ly/2q2nb03 Coupon Code Charger12 --12%
La Forge w/Diversity amzn.to/2EeZNB0 bit.ly/2uJqzSR
Battery Charger bit.ly/2KgUd8i
1s Battery Charger HTRC x4 bit.ly/2RNav9O Coupon Code Charger12 --12%
1s Batter Charger EV Peak E6 bit.ly/2JYw7Qo Coupon Code Charger12 --12%
Batteries bit.ly/2rs5rMm
Bench/Radio FPV screen amzn.to/2VnF5HY
Fastest Micro I have flown bit.ly/2kFlItK
Tranis X9D Plus bit.ly/2MdbwEE Coupon Code Parts8 --8% amzn.to/2JeSAEY
Devo 10 - modded amzn.to/2q1n8Bb
Jumper T8SG (inside) amzn.to/2GrzYE6
TS100 bit.ly/2MKn2Zk Coupon Code TS100 --$39.99 amzn.to/2pYhmku
Welder Adhesive amzn.to/2IpKKHj
Tool amzn.to/2GrCzOm
Bench Mat amzn.to/2GNemRY
Reward Free Patreon
/ nickburnsrc
NickburnsRC@gmail.com
Twitter
/ nickburnsrc
Facebook
/ nickburnsrc
Instagram
/ nickburnsrc
Thanks for Watching
Subscribe for more videos - วิทยาศาสตร์และเทคโนโลยี
![[LIVE] : ONE ลุมพินี 73 วันนี้!! คู่เอก "วรพล vs พันฤทธิ์"](http://i.ytimg.com/vi/rrOljlqse3A/mqdefault.jpg)
Sorry about popping my Ps all over you all. I will do better.
👍😀👍 love how much ypu give back to the drone community!!!!!! Thanks so mich Nick!!!! Keep the awesome reviews coming!!!!!!!!
New microphone? The tone sounds a tad different too. Not a big deal, it's just easy to notice small changes when you listen to hours and hours of over time. 😁
Its a seldom used mic. I am thinking with a slight cold I might have been using my lips more to speak than normal. Just a guess.
What is the remote you use?
I love how fast u go thru the features in the beginning of your videos, no need to draw them out. 👏
The problem is alot of youtubers love hearing themselves talk...Nick gets right to the point and feeds us the info we want to hear, no other BS.
I just got the THs after watching your review. I find it to be the most versatile quad for a person starting out or someone looking for an indoor flyer. I love mine in both 1s and 2s profiles. Thanks Nick!
that tinyhawk is amazing. Beautiful and well engineered design, great power. good for beginner pilots. this will definitely be my next whoop!!
Hi Nick , I love my Tiny hawk and This should be a new addition to the fleet .
Looks like an awesome little unit, I finally pulled the trigger on a Jumper T18 pro v2 and a mobula7 V2. I'm thinking about this one or the tinyhawk 2 for my next one.
You just told my friend better than I ever could, why he may wish to start a new hobby...or lifestyle.
Great vid combining TH-S and what a newbee should expect starting out! THX!
Nick great work THANK YOU !! For your work in the hobby.
Very nice Nick! Can’t wait to get my hands on one ...
Fantastic review and flying, Nick!!! 😃
Pretty amazing little quad! 😃
Oh man Nick, I really want on of these.. You killed it, awesome flying 4shO! 👏🏻👍🏻👍🏻👍🏻
First time seeing this, I already have the original tinyhawk and I love it so much I just going to have to have this one, ty Nick Burns....
Your reviews are the best! Appreciate your work
This video has 100% sold me on getting a tinyhawk.
Man still love watching your channel. Awesome stuff Nick :)
Thank you
I copy the PIDs and rates profiles on my custom 2S beta85 and it's freaking amazing! Thanks!
Hello Nick. You got such a good flight time 😱 4:30 OMG. Great!
Great video as always,
Greetings from Costa Rica 🇨🇷!
Nice job as always Nick, Thanks.
Great Review and Flying Nick!! that is a Cool Quad!! i Ned that One!!
you're a beast!! great review , like always.. cheers!!
Sometimes I have to force myself to stop smiling when I am flying because my cheeks start to hurt. This has to be one of the most fun hobbies ever. I tell everyone, if you are even remotely curious, TRY FPV! (get it, remotely!! HAYOOOOOOOO) Great video as usual!
for sure. This hobby should be fun fun fun, not so serious as some seem to try and make it.
Great review and advice. 👍👍👍👍👍 Awesome flying also. 👍👍
great work nick.i just ordered one of these for the kids i teach to fly.looks great.
I keep coming back 2 watch you rip around the house!!!! It just looks so fun!!!! I really wish i was smart and could build small quads and rip them!!!!!! I still cant fly acro!!! But i do love Flying all drones!!! Fpv is just the most fun!!!
:)
Great great review as always .. thanks Nick
Thank you Nick
you can see the roll is super sensitive since the aircraft is narrow. You could fix it with rates. Thanks Nick!
Great review. Unreal speed inside your house!
Thank you. We have good flight lines in the house for sure.
Got my Tinyhawk S a couple days ago. Motor connectors are on the top! Not sure why they decided to revert that. Good video, thanks for the info.
Also mine, motors connectors on top and motors are too hot in 2s. Why is that? Nick in your tinyhawks, your motors temperature is OK?
Thanks a lot for the review. Just ordered one, even I already have two Tinyhawks.
rocking all the tinyhawk you will be!
Nice house.Nice flying too.
Thank you
Thanks Nick.
I haven't seen a video of you flying in your house in a bit, you're flying way faster and smoother than you use too! Nice review as usual.
Thank you. Winter time is more classic indoor whoop season.
Great video! I really want one of these.
Awesome indoor flying
Thank you
hmm
a guy from a company i work with showed me he's Tiny Hawk few days ago
he's not a new pilot , but he told me this thing rly rly is a blast
thanks to this lil guy , he got 5 other guy's at their office to get hooked to FPV
Nice! Love to hear friends having fun together.😍
The original tinyhawk has a mockingbird CLI dump that was awesome. Hopefully we can get one for this.
There’s a new one out for betaflight 4.0 but it’s for 1s only at the moment. But what I did to my tinyhawk s was just play with the angle strength and left the pids alone. Much snappier now.
KSCFPV projectmockingbird.squarespace.com/pmb-setup-guides/tinyhawkv4
Very nice review and very thorough as usual. Interesting and quite happy to see EMAX listened to the reviews and consumers with these improvements and upgrades. My only thought is why did they have to make it all black? I fly in a lot of deep shade so this will be fun to find in a crash, but it's something that can be fixed and maybe they will offer the frame in white.
that is a good point, no buzzer and black, could be a good hunt to find.
Great flying and good video. New sub.
Hi again Nick, excellent job as usual. Very informative, also nice flying! I see with 348 comments u must find it hard to get back to everyone but if you have 2 seconds.??? I just bought the s after buying the regular rtr bundle and we excited to fly the new faster quad but I was fairly disappointed. I had the regular Tinyhawk hong pretty nicely. I had switched my profile to 3 and it 2as quite a bit faster. Well I had to pay a guy to get the bnf s version to bind with and to be able to fly with e6 transmitter. After a day and a half I get it back and what a dud. I don't know for sure but it seems like he or I did something we wrong....? As soon as I get back to work I do plan on joining your patreon Channel. thanks again Nick, if you don't have the time, I understand if you're too busy take care of yourself and your family keep those cool videos coming take care.
Sorry, I don't understand what the issue is. I understand there is an issue, just not sure what it happening.
@@NickBurnsFPV , okay so I went back into Betaflight. Well actually I am using Speedy Bee right now, long story. Anyway, I paid to have someone set up a S BNF to bind and fly with a E6 Transmitter. And it flys so slow. And initially, when I first got it back, it was changing speeds when I switched from angle to horizon to acro? Very strange, right? Well I went into Speedy Bee and changed both profiles to 1 and it worked. I now had alone modes but it was as slow a a caterpillar. Lol. I know the obvious question, why I don't I just talk to the guy who did the work?? Well he's a bit of a pre-madona, to the say the least. And again, I appreciate your time and I will be joining your patreon Channel just as soon as I go back to work. I guess my question is, does any of this make sense? I'm not that efficient in Betaflight, so when I got it and it just started going faster as I switched modes, my first concern was fly away. I figured flying slow as better than watching it fly away.....? Lol
Nick definitely one of your best videos
Thank you. I appreciate the compliment. Can you enlighten me as to what made it one of the best?
@@NickBurnsFPV The jump cuts got the pertinent information out fast. The flying was smooth and fast but also very clear. Out door was good as you were shooting between small places. It showed how small and nimble this is and also how well tuned it is. Honestly do not understand your lack of subs. At this point with the quality of content you should be well over 50k. Might be your tags,titles or thumbnails.../shrug
You could be on to something with the tags, titles or thumbs. I am definitely not a youtube guru.
@@NickBurnsFPV Nick with the quality and the shear amount of your content you should be well over 50k by now. Plus with new regs throughout the world your content is trending. You may want to study a little about how youtube works to get you trending and popping up on the sidebar. Also do some social media as well. RCgroups is pretty much dead so don't expect much there. Something isn't right, Has to be the titles, thumbs and tags. Also responding to your viewers has something to do with it as well. AndyRC does well cause his geographic location and the same with Stu.. youtube's algorithm looks at different regions and sees who else is serving the same content in those regions. So AndyRC is pretty much the only one I know of in the UK and Stu is pretty much the same in Australia. I really think Bruce is the ONLY one in new zealand plus he's been around for awhile, does planes and has a good broadcasting voice. Not really sure how Drone Camps got so many at all unless it's his "honest review" schtick. Drone Mesh has 30k already but the guy does offer allot of knowledge and his thumbnails are the best I've seen in this genre so he is growing fast.
Terrific video Nick! I love my TH V1 1s. I did have to buy a new frame. Started getting more E6000 than frame. Lol
worlds first E6000 frame! This new one should be more durable
I got my tinyhawk on Monday, flew it last night for the first time. WOW what a micro. I love my mobula7 as much as anyone but I think this thing just flies better. I think it’s faster. The motors are so buttery buttery smooth.
sounds like your having a good time. keep on
Love black color,
Any way to show those pids from the osd? I haven't downloaded beta flight and would like to copy them to my eachine novice 1
Sir there are no videos on how to bind the jumper v2 transmitter to the tiney hawk can you make one
I'm shoppin' for a brushless micro. This little bird is under consideration if I don't go the DIY rout...
WOW, you can fly man. Goals
Thank you
Hey Nick, love your vids! Just wondering what your overall favorite indoor quad is? I’ve been racing the drl sim for years and finally picked up some cool gear, sky03o and a TInyhawk freestyle but I’ve come to realize the open props are too dangerous around people and our tiny fur babies. Handling and camera/rssi are what I’d really like :) thanks for your consideration in advance!!
YAY!!!!
Just got notification emails saying you and KababFPV both just uploaded Tiny Hawk S videos.
Nice :)
yes, emax dictated the time and date of the releases.
That makes sense.
You still impress me with your indoor acro flying, my acro flying is best suited for outdoors in big spaces, indoors I've mastered angle mode pretty well, mainly because I don't live in a house as big as yours.
Our house is not only pretty large, but well laid out for fpv. Never moving :)
Because my house isn't such an ideal fpv playground for micro quads, almost 7 hours ago I decided to fly my Eachine UK65 outside, but I stayed inside, and perfected landing on the lit streetlight in the dark, because why not :) (latest video on my channel)
Nice. That light looks a bit like a duck bill.
Really nice emax does it again 😁😁
awesome
Great video to get back to addressing some new comers to FPV, need to do this one in a while.
I am interested to see how it does with something like a rdq 300mah 2s, maybe make an xt30 to ph2.0 adapter for testing purposes????
I put pre-arm on my micros just to keep in the habit of pre-arming my larger quads. :-D
I did receive my RDQ 2s 300mah ph2.0 batteries. I will work on seeing how the performance is.
Great job Nick as usual! I got myself a tinyhawk s to add to my Uruav UR65 for the winter. The UR65 in acro mode was tough to do in acro mode indoors and the Tinyhawk s is much better for acro indoors. Do you have a tutorial on flying acro inside? I am forcing myself to fly my Tinyhawk s in acro mode and I am getting better. Outside I fly acro all the time. Inside I feel like i am starting all over! How about some tips from the indoor acro mini quad master?
Lol. I don't know that I have any tips or tricks....fly a lot inside.
Great review Nick, looks like a blast!! I've already killed 2 secs in my OG Tinyhawk from flying so much, turtle mode is tough on these little quads
You're getting better at slow flying!
lol, boy it sure didn't feel like it. :)
Hiya Nick! Awesome review as always! Love the structure of all your reviews. One question, is there a flysky version?
I don't believe there is. :) We have to either add a flysky receiver, which it does have uarts available as in the video or use a multi module if your radio supports it.
Covered all the bases! Thx!!
I got a Xlite pro today. And I updated the firmware which supports d16 successfully. I can bind ac900 receiver and r-xsr receiver in d16, and both work ok. However, I can not bind tinyhawk s which should support d16( I can bind it in d16 mode with taranis QX7). Can you please try to bind xlite pro with tinyhawk s, see if it works? thanks.
Awesome 👍👍
Great video!
I'm new to the hobby..never flown a quad yet, just about 20 hours in liftoff.
Destroyed my tinyhawk s before I even flew it. I thought I plugged in my USB cable into it, but quickly realized i touched the circuitry next to the USB port...with battery plugged in. Batteries don't work anymore.
I have a lot to learn. 🙂
wow, were your hands wet?
@@NickBurnsFPV no. I didn't realize you didn't need a battery plugged in quad when plugging in USB cable to use betaflight. So I short-circuited something by touching the metal end of USB cable against the circuit board. I could smell something burn when it happened
@@nathanhunzeker6033 oh I understand better now. Thank you
Nice vid nick. I wonder when will they come out with a HD ver of tinyhawk. Coz that would be awesome
I am not sure they will. I would think the v2 or "S" version would have had more raw thrust if they were thinking an HD version next. I could be wrong, we will have to wait and see.
For the fc for this little guy why does emax show a capacitor on the top behind the vtx as well as the plugs for the motors, they show the same mounting position as the original th. Weird. But saying that my ths has the same vtx/cam issue as the original. I get white flashes in my Fpv feed and makes it hard to fly sometimes.
You showed the connections for a second Rx - enough room under the hood? I picked up the original TH and managed to get a DSMX in there, but it was a tight fit. Wish I'd held out for the S after watching this!
Sorry I missed this comment. I am sure I responded a day or so ago. I do think there is room, it will need to be a micro rx and the space should be just like the original tinyhawk.
Great footage. How long did it get you to learn to fly indoors that good?
You can just press the black plastic to press the button. No need to get your fingers in it :)
Great review!! Which 2S quad would you recommend; the tinyhawk S, the Trashcan, or the mobula7? The 200 mw vtx on the Trashcan is appealing, but which would you recommend overall? Thanks
If you have been flying a while the trashcan or mobula would be my recommendation. I prefer the mobula for the linear throttle curve where the trashcan has a large amount of thrust at the lower end of the throttle. If you haven't been flying very long the tinyhawk is going to be the most durable, the trashcan would be the next most durable and last mobula
Are you kidding me with that tune?! Wow, it's spectacular.
This video will absolutely help new pilots. Phenomenal job, bud.
Impressed by the 1s performance. 2s is ok...not a selling point from the footage. PH 2.0 connector on 2s is limiting. I'd like to see XT30/51005, but cautious of the amp spikes.
Expect to see this at the indoor races...
Yes the focus appears to be maximizing 1s performance. I asked if the ESC rating changed, no response. I did try to draw out the worst in the tune with the quick hard 180 turns, we get some chop then, but really for 1s, very good.
Hi Nick, yes the ESC is now rated to 5A continuous and 6A burst per motor. Inspirational flying and really appreciate you explaining things in simple way thats friendly to new pilots.
Thank you
Hi Nick, after watching this great review, I took the plunge on the tinyhawk s.
I'm not sure if I'm doing something wrong thou. When I try changing pid profile to 1 1 it always shows as 1 4 no matter what. Also when in air mode the craft bounces. OK if changed to other modes. I'm sure I'll figure it out. Thanks again 👍
Not sure I understand the profile issue. Do you mean it doesn't change to profile 1 4? or that it switches back after leaving the OSD? Air mode, can cause bounces off of the ground or other surfaces when making contact, this is normal. When landing hover just over the ground and disarm to land without bouncing. If you don't want to land in that method, switch out of air mode when landing, a switch assigned to air mode will be required.
Looks great! Any chance you could check on a particular battery fit when you have time? I'm curious about running either 1 or a pair of the tiny whoop 333 1s batteries. For 2s or 1s I could make a couple ph2.0 y adapters in parallel and series. Interested in these in particular because I already have a bunch and really like their performance. If the rx2 can be used to connect a nano dsmx receiver I'll probably be buying one. Nice review, as always!
Sure, seems simple. I will look into it.
@@NickBurnsFPV Thanks, I appreciate it!
Just a FYI, the TinyHawk S does have d16 support but it takes some configuration. I had to set it to FRSKY_X in betaflight and even then the binding process was a little buggy but I am now able to use it with the X9 lite which does not have d8 support.
Interesting, range stays the same?
@@NickBurnsFPV I have no idea. I'm just happy I got it to work! I didn't know I had a potential compatibility issue between the Taranis X9 lite and the Tinyhawk.
Hi Nick, is the binding procedure tricky on this one? I can’t seem to get the bind to take.
Its pretty typical. If I recall correctly, we press and hold the button for 2 seconds then bing in d8 mode on our radio.
would have been cool if they made a nano camera mount
for racer nano and nano 2
hi nick
i just purchased a tinyhawk s and on my are the motor connectors just like the old one so my question is is this ok or did i catch a clone or copy got it from ebay
That is normal. The freestyle is the first time they have direct soldered the motor wires.
Can you put a link to them 1s batteries that u used to get well over 4min in the video and thanks
Here are a few depending on purchase preference. I did add these to the video description...forgot that details.
Banggood bit.ly/2QQEk9s
RaceDayQuads bit.ly/2QSqgfN
Amazon 4 pack amzn.to/31bmHG9
Amazon single battery amzn.to/2WNBac2
In Canada bit.ly/2WLLQrL
I own the original tinyhawk. Can i convert it to tinyhawk s ? I only fly it with 1s. Did i only need to change the motors and get better performance?
Not without big expense. The s version is 2s compatible, the main board would need to be replaced and the motors.
Video looks good, what antennas do you use? That video was legacy mode? What is that after market antenna you got on the x lite? I get pretty low reception with mine.
I don't think it was legacy mode, but I am not certain. I use AXII antennas. The antenna on the x-lite is for the jr module on the back of the radio.
Hi, which goggles and controller can I use for this?
any fpv goggle and many frsky radios support d8 mode. Examples would be skyzone 03O googles and the frsky x-lite radio.
Bardwell has a good video about "project mocking bird" (not the CIA operation). It's a team of people who specialize in optimizing performance in micro quads.
As far as quad retrieval is concerned, you could design a tennis ball shooter running on compressed air to knock the quad out of trouble.
yes, Patrick J Clarke is a wizard with PMB. I have only been stuck in a tree twice, both times I was able to get it with a rake and knock it out with a ball :)
So with the exception of the camera mounting Emax listened and fixed EVERYTHING about the original, and kept it at the same price, well done Emax!! That is great!! Was wondering about your indoor audio, nice to know. Great review as always Nick! Also what is your take on the new rules and LAANC system?
At this time I am not well informed on the LAANC system.
@@NickBurnsFPV I'm not sure how it's gonna affect the sub 250g quads but doesn't seem to be any distinction between weight class now for regulations
I am hopeful we will follow Canada to some degree
@@NickBurnsFPV Right!! Love their rules for sub 250g quads....basically, don't be stupid, and almost in those words
WOW
What are top 5 all time favorite micros? Preferably those that are great indoors and outdoors?
Thanks Nick!
whoa, thats a hard one. In the moment, mobula 7, tinyhawk s, sailfly x, sky starz x120, sky starz x140 pro. These are all RTFs, builds would be even tougher.
how do you access that menu at 13:58 to change pid profile?
we use the sticks on the radio. If flying mode 2, right stick middle full up and left stick middle full left, the select profile. A video might be more beneficial. Maybe search youtube for "fpv osd tutorial".
@nick, awesome review. I got a quick question. i'm just starting with the hobby and i don't want to spend a lot of money on a charger. Do you think the little charging board that comes with this package will help me out for the first couple of months? i really like the small form factor and that it works with 1 and 2s. I only fly whoops and toothpick class! thanks in advance!
The included charger will work just fine, it won't charge very fast and I suggest using a cell phone charging brick no a computer. I don't trust them enough to plug into a computer.
@@NickBurnsFPV Thanks for the quikc reply. I was thinking about using it with an Ipad Charger.
yes, that will work too.
Hi there, just wanting to know what goggle are you using in this video?
I use the skyzone 03O goggles
Hahaha, everyone must have had their review lined up and ready to go. There was a whole lot of reviewers releasing their review within a minute of the EMAX release video for this quad. I watched yours first of course ;-)
Yes, Emax coordinated the release and time. Any video published before was out of line with Emax.
Once again emax has made a fairly solid model after everyone else. Not that that's bad, it just seems like they don't rush their products to market to meet hype which arguable means they get to avoid the pitfalls everyone else fell prone to. Seems like you put a bit more background/intro into this one, probably a good idea since this probably will be a popular beginner model. 👍
Yes and yes. I think this is designed for someone just getting started or still pretty early in their fpv journey. I would expect most experienced pilots to prefer more aggressive 2s whoops like the mobula, or betafpv "Power whoops", or outside the 40gram non ducted designs we have been seeing.
There’s a little clip on Thingeverse to hold the camera in. I have one one mine & knock on wood the cares has never come loose
Lol you beat me to that comment lol peace 👌
My feed breaks up a lot more than yours did you take the antenna out of the canopy?
No, I am using the rapidfire module and axii antennas. Also wifi can cause interference. try it with wifi off.
can i bind the tinyhawk s to the turnigy evolution?
no, we have to add a flysky receiver, as the evolution is flysky
will this bind to a dx6i? thank you
Not out of the box. It would require a dsmx receiver be added
Do you see any improvement in the VTX performance of the new model? I love my original TH but the video feed is barely useable. Your video seems to be working pretty well.
I don't see improvement, but as you said mine is pretty good and the original was good too. The only improvement in vtx that I am aware of is the smart audio. If video reception isn't good I would pull the antenna out of the housing to test that. Also we might need to change bands and channel to get out of the normal wifi band, or turn our homes wifi off to see if that helps. Otherwise we are looking at a new goggle module if that is an option. I have been running the rapidfire module shortly after it came out...but it is expensive.
Great review and amazing skill, I can see you have fun with this. I have a question if I can, my tinyhawk s suddenly start to not connecting to my google (or other google) so I have to push the button near the USB for 5 second, after for 2 seconds change the band, I guess, and after pushing it for other 5 second (I think to exit this procedure) and like that I can have video again, but when I replace battery I need to redo the whole process. Any suggestion to fix this? thanks
does auto scan on your goggles not pick up the video signal. Sounds like the vtx is on a different channel/band than your goggles, pressing the button then gets the channels to the same or near, then battery change resets, the reset is due to betaflight osd control of the band/channel. When you have signal go into the osd with left stick mid and full left, right stick full forward middle. Then select the features and then I think its tramp, change the band and channel to the one your goggles are on, select set, the video should now be on the same channel when batteries are changed.
@@NickBurnsFPV It worked for me :) thanks a lot. It is my first drone with betaflight and stuff so for newbe is not that easy to understand all the settings. But thanks a lot I appreciate
@@giropiro yes, the learning curve is a difficult barrier, but each day we learn more and youtube/online has many wonderful learning opportunities. Good to hear your all set for more fun.
How does the charger work? Do you plug in the balance leads for 2s? Also how do you know when they are done? BTW Awesome video. One of the best channels on youtube.
Yes, the charger charges off the balance led. I don't recall specifically, usually either the light will change color or go from on to off on these little chargers. Thank you
@@NickBurnsFPV Thanks.
Nick, are u anle to tell if the guts from the original TinyHawk will fit in new style frame ? Great review.
🤘😁👍
the one bit I am uncertain about is the camera. I looks so similar, but I can't be completely sure the camera will natively mount cleanly. If a bit of diy for the camera is acceptable, I am pretty certain all the other components will fit right in.
Great video as allways! How does it stack up to the Mobula? Does it have the same power as the Mob on 2S?
No it does not. This designed or iteration is targeted at maximize 1s performance. M7 has more power and thrust to weight ratio.
Aww, thats to bad, guess we can´t have it all!
Also, what do think about missing this camera and installing the nano split 3. With the HD and the sd card slot? And I have a 200mw Switchable VTX, that I would like to add...., probably too much weight, maybe one or the other?? Ty
installing a split is going to be a big mod job, new canopy or lots of glue etc.
@@NickBurnsFPV I figured the same. Here's a mind bender, if I were to swap the frame for a V3 Mobula frame, would I have to switch motor direction?
Nick, I tried to join your patreon Channel and does it only take PayPal? If I could use my credit or debit card that would be great..?
Also, any idea how to make this S fly faster? It's a dog
Nice video. I would have expected a vtx with adjustable power, I don't know why this choice
Go elsewhere for critical reviews, this is marketing.
@@peregrineflow7354 it's not a critical review, I appreciate this hobby from years ☺️