I'm new to crossbows and I got the new M10 and in all I like it. The odd bolt drops out when I cock it, the handle broke the second day on cocking it, but they sent me a new one. Accuracy down the sights is a wast of time but it is a cross bow not a gun, so use red dot or something and zero, and it's great. I only use it once in a blue moon but I would recommend it. I can take it out the case and use in less than 20 seconds, that's cool.
yup, its not the best and its nor perfect, but at least theres a website you can go to, get parts and at least speak to some one. try and do that with ek, when your new 1k crossbow fcks up!
yup, same here, I don't find a fault with them. I think its just a case of product bashing... as I show in the video, Ek archery famously sold the cobra for years as rated at 80lbs, when the bow was actually 55lbs, so its not uncommon to over rate and under deliver on spec. will be interesting to see, if they send the parts.
Exceptional video. Home defense is paramount. An upgraded Steambow is a perfect companion. This New Year has already started off with orchestrated madness. Stay Vigilant 'Stoned people shouldnt throw glass houses.'...😁
yup, makers should be getting there heads together, not knocking them together, it could kick off major, at any time! any place any where, no one is safe.
A really interesting video mate. Well explained and demonstrated. I've finally convinced 'er indoors that we need a crossbow for home defence (not hard given the state of things right now!) and after watching one of your earlier videos, l ordered a Stinger ll closed version at an excellent price, with a view to opening up myself. I cannot believe A: how hard it is to find UK dealers who sell accessories for the Stinger and B: how bloody EXPENSIVE they are when you can find them! £28 for a limb mounting block, plus delivery! Do you know of a cheaper place to buy accessories?
I've got 4 M10 mags and not had a single problem with them. I have had the issue with the rear upper receiver pin working its way loose after a few bolts though. This is bloody dangerous, so I punched it out and replaced it with a thumbscrew and nut.
@ the factory upgrade is an o-ring, I'm not trusting that. Where can I share a pic with you, are you on twitter? I'll take a few once I've cut the bolt to size and tidied it up, still prototype atm.
Mark the Steambow M10 magazine has some rectangular springs inside. Do you know what diameter wire the springs use? If you have the other dimensions of the springs that would be most helpful. Interesting video.
yup, basically I think Poe lang are using the steambow limbs on the new Ek and sabotaging production to drive there own product. that's what I think! id have to break open one of my mags now, they are all glued together lol :)
@@markhuckercelticcrossbows7887 The Revo does look like a good product at least. I saw the springs on the channel that invented the replacement part that goes under the springs to prevent dry firing. Have you tried that part yet?
@evropapagan5551 hiya, no I haven't seen them, I've not had a problem with mine, so I haven't bothered, but now you have mentioned it, I'll have a look thanks. yes the revo does look a class product, but its a hell of a lot of money and you have to buy the complete system, rather an upgrade. no problem with that, especially if your old system is knackered or coming in fresh, I'm sure that can do those mags cheaper, they got to be on double if not triple mark up, on those!
Thanks for the forecast! I need some advice: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). What's the best way to send them to Binance?
we have some big hitters on this channel, including farimier! happy new year dude, Dani from spraying paint, keep safe butty, Kevin Hicks from the history squad, crossbow concepts th-cam.com/video/AAeMQlRcEMk/w-d-xo.html many more. happy new year to you all and stay safe.
Funny thing I’ve found with the Sprave fanboys dissing the M10 is, they never talk about the price of GoGun products. You pay a hell of a lot for the Mey Interceptor, almost double compared to the M10, so I’m not surprised the quality is better.
The interceptor has flex in its butt stock which includes the trigger. The for-grip is placed too far forward to be accurate while standing and it's a whale. Tell me where the quality is better?
I'm new to crossbows and I got the new M10 and in all I like it. The odd bolt drops out when I cock it, the handle broke the second day on cocking it, but they sent me a new one. Accuracy down the sights is a wast of time but it is a cross bow not a gun, so use red dot or something and zero, and it's great. I only use it once in a blue moon but I would recommend it. I can take it out the case and use in less than 20 seconds, that's cool.
yup, its not the best and its nor perfect, but at least theres a website you can go to, get parts and at least speak to some one. try and do that with ek, when your new 1k crossbow fcks up!
I have an M10 system with 2 x magazines, they both work flawlessly for me with the 90/120lb limbs.
yup, same here, I don't find a fault with them. I think its just a case of product bashing... as I show in the video, Ek archery famously sold the cobra for years as rated at 80lbs, when the bow was actually 55lbs, so its not uncommon to over rate and under deliver on spec. will be interesting to see, if they send the parts.
Exceptional video. Home defense is paramount. An upgraded Steambow is a perfect companion. This New Year has already started off with orchestrated madness.
Stay Vigilant
'Stoned people shouldnt throw glass houses.'...😁
yup, makers should be getting there heads together, not knocking them together, it could kick off major, at any time! any place any where, no one is safe.
A really interesting video mate. Well explained and demonstrated. I've finally convinced 'er indoors that we need a crossbow for home defence (not hard given the state of things right now!) and after watching one of your earlier videos, l ordered a Stinger ll closed version at an excellent price, with a view to opening up myself.
I cannot believe A: how hard it is to find UK dealers who sell accessories for the Stinger and B: how bloody EXPENSIVE they are when you can find them! £28 for a limb mounting block, plus delivery!
Do you know of a cheaper place to buy accessories?
Wait till the Steambow website has some offers on. Even with the import tax, the price should be lower than buying in the UK.
i make and sell some of the limb blocks and custom tunning triggers, magazines, stocks etc, ovr on my ebay, pagan welsh
@markhuckercelticcrossbows7887 Ah, brilliant! I'll head over there.😊
Waiting for an opinion on that mag, I've got the metal one. Great video mate but where are the links?
I've got 4 M10 mags and not had a single problem with them.
I have had the issue with the rear upper receiver pin working its way loose after a few bolts though.
This is bloody dangerous, so I punched it out and replaced it with a thumbscrew and nut.
you`ll have to send me a pic butty, but i think there is a factory upgrade for that!
@ the factory upgrade is an o-ring, I'm not trusting that. Where can I share a pic with you, are you on twitter?
I'll take a few once I've cut the bolt to size and tidied it up, still prototype atm.
@@darkchild130 emails top of page, in the about section butty :)
@@markhuckercelticcrossbows7887got the pics mate, not seeing any email address anywhere on your channel info.
@@darkchild130 here you are butty
markhucker@gmx.com
Mark the Steambow M10 magazine has some rectangular springs inside. Do you know what diameter wire the springs use? If you have the other dimensions of the springs that would be most helpful. Interesting video.
yup, basically I think Poe lang are using the steambow limbs on the new Ek and sabotaging production to drive there own product. that's what I think!
id have to break open one of my mags now, they are all glued together lol :)
@@markhuckercelticcrossbows7887 The Revo does look like a good product at least.
I saw the springs on the channel that invented the replacement part that goes under the springs to prevent dry firing. Have you tried that part yet?
@evropapagan5551 hiya, no I haven't seen them, I've not had a problem with mine, so I haven't bothered, but now you have mentioned it, I'll have a look thanks.
yes the revo does look a class product, but its a hell of a lot of money and you have to buy the complete system, rather an upgrade.
no problem with that, especially if your old system is knackered or coming in fresh, I'm sure that can do those mags cheaper, they got to be on double if not triple mark up, on those!
Thanks for the forecast! I need some advice: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). What's the best way to send them to Binance?
lol i know what us saying, but i cant say on here. anything indoors 90lbs n over steambow. heavy broadhead razor tip is good for the shaving stuff.
I'll post a video on my community page, using a 35lbs limb, bare in mind, the foam is a lot denser and harder to, ummmm you know.
we have some big hitters on this channel, including farimier! happy new year dude, Dani from spraying paint, keep safe butty, Kevin Hicks from the history squad, crossbow concepts th-cam.com/video/AAeMQlRcEMk/w-d-xo.html many more. happy new year to you all and stay safe.
Funny thing I’ve found with the Sprave fanboys dissing the M10 is, they never talk about the price of GoGun products. You pay a hell of a lot for the Mey Interceptor, almost double compared to the M10, so I’m not surprised the quality is better.
The interceptor has flex in its butt stock which includes the trigger. The for-grip is placed too far forward to be accurate while standing and it's a whale. Tell me where the quality is better?
@ Just going off what people have said online. Also I assumed the high price tag meant they used higher quality materials.
same with the air rifles, give me a Daystate any day, not something never established for insane money.