Jeep YJ Speakers and Radio Upgrade! Replace that Old Factory System

แชร์
ฝัง
  • เผยแพร่เมื่อ 19 ธ.ค. 2024

ความคิดเห็น • 43

  • @billhogg9287
    @billhogg9287 ปีที่แล้ว +6

    My brother-in-law just gave me a ‘95 YJ. Been sitting for nearly 5 years. Got it running. Need to replace the radio and speakers. I appreciate you sharing this! Thanks, Chris!

    • @tophersgarage9841
      @tophersgarage9841  ปีที่แล้ว

      That’s awesome! Congrats on your new YJ!

    • @greggroves2303
      @greggroves2303 ปีที่แล้ว +1

      Do you have to have an Amp for this scenario I have a 92 jeep and looking to do the same

    • @tophersgarage9841
      @tophersgarage9841  ปีที่แล้ว +1

      You don’t need an amp! The head unit is plenty to power these speakers

    • @greggroves2303
      @greggroves2303 ปีที่แล้ว

      @@tophersgarage9841 yup 100% correct no Amp required

  • @randomlibra
    @randomlibra 2 หลายเดือนก่อน +2

    I have a 92 YJ and I will NEVER, I repeat NEVER, replace the dash speakers again. I will be floor pods or mount them somewhere else. That dash removal was a nightmare LOL.
    I have pods behind the seats and I think I will be getting a soundbar soon.

  • @seanspears4434
    @seanspears4434 ปีที่แล้ว +6

    Great video made me decide to keep using my Bluetooth speakers or just enjoy the sound of the wind lol! ✌🏼

    • @tophersgarage9841
      @tophersgarage9841  ปีที่แล้ว +1

      It’s not to bad of an install, but the sound of the wind isn’t bad either 🤣

    • @CowboyTech
      @CowboyTech 4 หลายเดือนก่อน

      I'll just use earbuds and my phone.

  • @CowboyTech
    @CowboyTech 4 หลายเดือนก่อน +1

    That is so much work. I think I will just get bluetooth headphones and connect to my phone.

  • @DailyBrewGarage
    @DailyBrewGarage 2 ปีที่แล้ว +3

    Good stuff Chris. I need to do the same on my 88 but am going to wait and combine it with a much needed complete Painless Wiring system rewire.

  • @deannaaguado4512
    @deannaaguado4512 ปีที่แล้ว +2

    This was a really nicely done and instructed video! Thank you! I’m planning to change my speakers out too

  • @NashTony
    @NashTony 2 หลายเดือนก่อน +1

    This video was awesome. Thank you so much.

  • @grasseletricboogaloo5069
    @grasseletricboogaloo5069 ปีที่แล้ว +1

    Great setup but how did u connect the back speakers to the sound console?

    • @tophersgarage9841
      @tophersgarage9841  ปีที่แล้ว

      Speaker wire and the head unit wiring harness had wires to connect. I used wire connectors to splice them together

  • @zachporter8939
    @zachporter8939 ปีที่แล้ว +1

    Thank you for the video.

  • @tatchik77
    @tatchik77 2 ปีที่แล้ว +1

    Your torque bolts came out a lot easier than mine did. I have a couple that are not coming out...trying to find a work around for dropping the windshield 🤦🏻

    • @tophersgarage9841
      @tophersgarage9841  2 ปีที่แล้ว +1

      Spray them with PB blaster and give it a day or two. I just removed some from the tailgate and at first they wouldn’t budge! PB Blaster is a life saver!

    • @tatchik77
      @tatchik77 2 ปีที่แล้ว +1

      @@tophersgarage9841 did that, the head is getting wallered(🤔) out 😝

  • @mrlaw711
    @mrlaw711 ปีที่แล้ว +1

    Great job and descriptions.

  • @HOCKMAN1981
    @HOCKMAN1981 10 หลายเดือนก่อน +1

    Size are the front speakers? 4inch?

    • @tophersgarage9841
      @tophersgarage9841  10 หลายเดือนก่อน +1

      4x6 the ones I used are linked in the description!

  • @chrishunt5291
    @chrishunt5291 ปีที่แล้ว +1

    I've been watching your videos, they are good. I puta beware speaker in the front driver's side. Same as the ones you got. You had so much more room. With min being a automatic. It does not go out that far. It was a bear.

    • @tophersgarage9841
      @tophersgarage9841  ปีที่แล้ว

      I didn’t even think there would be difference.. glad you got it done!

  • @chasechevy8933
    @chasechevy8933 ปีที่แล้ว +2

    Nice Job, Thnx

  • @jaycastaldi941
    @jaycastaldi941 ปีที่แล้ว +1

    What phone mount are you using for YJ in the video?? Do you like it?

    • @tophersgarage9841
      @tophersgarage9841  ปีที่แล้ว

      It’s this cheap one from Walmart, I’ve had it for several years now and seems to work!
      : www.walmart.com/ip/onn-Car-Window-or-Dash-Phone-Mount-Compatible-with-2-in-3-7-in-Wide-Mobile-Phones/260075964?athbdg=L1200&from=/search

    • @jaycastaldi941
      @jaycastaldi941 ปีที่แล้ว +1

      Thanks.. i got one!!

  • @dougharlow6037
    @dougharlow6037 2 ปีที่แล้ว +1

    Just curious why you didn’t use a sound bar for the rear speakers? Nice video. Thanks

    • @tophersgarage9841
      @tophersgarage9841  2 ปีที่แล้ว +5

      The Jeep didn’t come with a sound bar. The price of buying a sound bar is pretty comparable to the cost of these speakers and I thought they looked a little more unique!

  • @felipebarrera1535
    @felipebarrera1535 ปีที่แล้ว +1

    Onthe head unit, my current setup has a face plate and the back to it in my jeep. Can I still use the one you listed if I uninstall the whole thing?

    • @tophersgarage9841
      @tophersgarage9841  ปีที่แล้ว

      I would assume so, but you may need a wiring adapter

  • @michaelgutierrez2975
    @michaelgutierrez2975 ปีที่แล้ว +1

    Does the head unit come with the wiring

  • @jacobkeller29
    @jacobkeller29 2 ปีที่แล้ว +1

    Thanks for sharing

  • @danielabilez3619
    @danielabilez3619 2 ปีที่แล้ว +1

    Thank you. Mystery solved