Your plane's always look so good. I am a horrible builder. I like the hot glue because it dries so fast but it is heavy. this glue is lighter and stronger, I just need more patience. I have to repeat each step three times and it still looks bad. So thanks for the inspiration and proving that it can be done... Keep up the good work.
Superbe travail de vidéo, d'édition, super clair, avec tout en détails, plein d'astuces... Le truc que j'aurais adoré connaître avant l'Internet et le dépron. Cette vidéo et le plan partagé valent sans problème un kit de cette époque. Et si jamais on s'était persuadé que le balsa c'est mieux, impossible de ne plus considérer ceci comme du véritable aéromodélisme dans les règles de l'art ! (J'ai été initié par un ancien de la vieille école, le vol libre avec la minuterie :) Et bravo pour la création qui vole super bien.
You are very precise and clean when you work with your hands. I also built a twin engine foam plane with 1.7 m wingspan but I wasn't as clever when making every detail so perfect! Congratulations man :)
I finally got around to making the wing and as I feared, the foam does kink and break, despite my efforts to pre-bend it. I'll add material next to the kinks to restore the airfoil profile. Question: How are the flaps and aileron hinged? You show the vertical rudder and the rear stabilizer, but not the flaps and ailerons...😭
@@NumaVIG Yes, next to severely rolling with a piece of pipe to pre-bend. My foam seems to be more brittle than what you use... Laminating film hinges it is. Currently waiting for the glue to set 100%, the HK Foam safe glue takes a long timeto set in my cold workspace.
Cashier probably be like: "Ah yes a pack of foam board right?, as usual. That will be (insert price) please" Really enjoyed your content btw, clean and beautiful work as always. : )
Hi! I love your care and attention to accuracy in your builds. I am planning a winter build of a Short Solent flying boat. They were traditionally white/cream in colour. Unfortunately, over the last few years it has become impossible to get white depron sheet, and I have grey (large) depron to use for the build. Do you have any advice on how I would proceed with 'killing' the grey, and getting a nice white finish, please? Once again, thank you, take care,you and yours, Den, Cymru (Wales)
the unique dislike is perfomed by Curtiss-Wright company! Very nice and simple! have good flights. are the two motors driven by a single channel or do they have differential controls? can you put links for the electronics and brushless motors? on Banggood and Aliexpress, i have not found many thanks EDIT: at the plans link, in description, i have found all the correct links: thank you!
Please clear out the servos for me - in the plans you stated 4 different servos (4.1g and 8.6g) but here 6 x 5g. i guess 6 pieces is the correct ammount, since we have rudder, elevator, 2 flaps and 2 ailerons? (question might seem lame, but I'm a novice in RC planes)
Thank you for the lovely video, all of the details in a simple package. I'm trying to track down an equivalent to Titan Wild Premium, could you tell me what type of glue it is, or name an internationally available option such as brown gorilla glue.
Спасибо за столь подробное видео. Теперь хочу собрать свой первый пенолёт на базе этого. А насколько обклейка скотчем ухудшит лётные качества? И нужен ли руль направления, часто ли им пользуются?
Did you really install a gyro into the plane ? Thanks for the build video but I think it's really hard to try to do same thing, it lacks some importants step in my opinion. Too bad we don't see how you proceed to install electronic parts (servos for rudder, elevator and flaps) It seems you install magnets to close the electronic compartment. Did you apply something on the plane before the water launching ? However congrat for your building and your nice flight video !
That is a great looking plane and I want to make it. Typically I have used 'blue fanfold foam', but I wanted to try this underlayment foam sheet. Sadly here in the USA I cannot find what you're using at my local Home Depot or Lowe's. :( Guess it's back to the blue stuff or FliteTest craft foam.
Buongiorno..nel video voli sempre con i flap abbassati perché è più stabile o per la bassa velocità? vorrei farlo per fpv, ma dato che il peso aumenta notevolmente ho paura che senza flap diventa instabile.grazie
Only when I saw you cut the elevator, showing the 30 cm ruler, it dawned on me why my parts seemed so much bigger than what you show in the video... You're showing the 1.05 m span build, isn't it?
@@NumaVIG Another question: I intend to use 80micron laminating foil to strengthen the surface of the Depron, can I iron it on the wing halves prior to bending the leading edge, or will that make the foam too stiff to bend properly?
@@NumaVIG I call it Depron, but it's an underlayment foam similar to what you use. Downside is, it only comes in antracite (dark grey), so markings are hard to see...
On the 150 cm span version, did you make the ailerons in the same way as the flaps (using double girders), or do I cut them out after building the wing as shown?
Saludos desde España. Felicidades por el plano y la construcción. Muy limpios y sencillos. Llevo muchos años construyendo aviones de corcho y este plano me ha parecido una maravilla. Si alguna vez lo piensa bien y quisiera usted, seria impresionante que creara un plano de un P-40. Michas gracias por los planos y el vídeo. Esta tarde empiezo a construirlo. Ya comentaré como va. Repito las gracias y mi agradecimiento.
добрый день, за счет чего самолет летает так плавно, что разворачивается практически на месте? я собрал цессну и пятое падение она не пережила, я совсем новичок. управление было чересчур резким, как с этим бороться? ну а скорость видимо не уменьшить, так как иначе не хватит подъемной силы. как происходило ваше обучение полетам?
малый вес самолета при большом размахе, полный штиль, полет на грани сваливания с выпущенными закрылками, рулежка в основном рулем направления т. к. только хвост хорошо обдувается винтами, можно еще рулить моторами, но в данном случае они синхронны, элероны на малой скорости неэффективны, да и с большим креном легко свалиться. А учился я с гироскопом HobbyEagle A3 V2 и сейчас его частенько использую, т. к. постоянно новый не настроенный самолет, да еще порывы ветра
стабилизатор сам выравнивает самолет в 3-х плоскостях и управление становится не сложнее катера или машинки, даже с порывами ветра. Далее его можно прямо в полете отключить или снизить чувствительность (приемник нужен 6 канальный)
все равно слишком все тяжелое, метровая цессна без скотча грамм 200 весит, это все легко тягает 10 г. моторчик который можно долбать носом в землю сколько угодно, аккумы по 100г. тоже излишни, половина тяги уйдет на его таскание, и при падении разворотит нос запросто
@@NumaVIG i think i printed it wrong, that's where my mistake is. When you print in A4, so you print it in standard or do you actively choose to downscale it 70%?
El avión completo pesa 480 g. Está escrito en la descripción del video. El material, como se ve al comienzo del video, se encuentra en bricocentros y es poliestireno XPS (extruido, no expandido: es una esponja única, no un compuesto de bolas) utilizado como sustrato para pisos flotantes, cuesta muy poco y se encuentra en paquetes de 4-5 mm de espesor, en promedio, alrededor de 10 euros (aquí en Italia) como pegamento, recomiendo el UHU por, que no disuelve el material u otro similar
Спасибо за то что делитесь опытом и чертежами моделей. Как разрешат у нас радиоуправляемые авиамодели - обязательно с детьми будем делать каждую. К стати аэроглиссер шикарен, но бесколлекторный мотор слишком мощный для него, видимо по этой причине у Вас стоит обычный коллекторник...
@@NumaVIG ну как объяснить проще, я живу там где идут боевые действия, любые полёты запрещены и могут принять за вражеский беспилотник с вытекающими последствиями.
@@NumaVIG ohhh thanks for replying I have a request for u I live in india and here I am not getting that sheet so can send me that I will pay u plzzz 🥺 and can u give it email address for contacting u
Полметровый самолетик можно, а так 3 мм подойдет только для обшивки крыла размахом не более 1,2 м. Даже сверхлегкий Slow Flyer был сделан на каркасе из 4 мм
We used to get a green depron sheet that even came in bog rolls of 50 meters called Selitac specifically for flooring that is far more malleable than std depron sheet but no one sells it here anymore :( it literally disappeared overnight replaced by EVA
I love the sound of sandpaper on foam in the evening ...
Hahaha, me too! Especially foam with cutting and sanding sound while I holding a ice cold beer sipping on a beautiful evening...
Ohhhhh.... Mai gash... Thus is the most insane sonic in this World...
Your are very crazy :{
Sounds like...victory.....
Одно наслаждение смотреть ваши видео!)
Thank you for the ASMR. And no music. 👍 Very pleasing to hear the working sounds. Makes it more immersive.
Beautiful build.
Your plane's always look so good.
I am a horrible builder.
I like the hot glue because it dries so fast but it is heavy. this glue is lighter and stronger, I just need more patience.
I have to repeat each step three times and it still looks bad.
So thanks for the inspiration and proving that it can be done...
Keep up the good work.
Beautiful work. If people have stress, they should watch this. And thank you for not putting music on the video 👍
I really don't have any words for your best perfection..........
Good job bro ..........
Love from India.........
WOW, that’s a great job you’ve done with that plane, a lot of skill and thought put in into everything that you did, was great to watch.
Отличная модель и ролик все показал доступно и просто. Так держать!
Superbe travail de vidéo, d'édition, super clair, avec tout en détails, plein d'astuces...
Le truc que j'aurais adoré connaître avant l'Internet et le dépron. Cette vidéo et le plan partagé valent sans problème un kit de cette époque.
Et si jamais on s'était persuadé que le balsa c'est mieux, impossible de ne plus considérer ceci comme du véritable aéromodélisme dans les règles de l'art ! (J'ai été initié par un ancien de la vieille école, le vol libre avec la minuterie :)
Et bravo pour la création qui vole super bien.
You did a good job on this plane, its looking awsome. Just building it, fuselage is already done :D
You are very precise and clean when you work with your hands. I also built a twin engine foam plane with 1.7 m wingspan but I wasn't as clever when making every detail so perfect! Congratulations man :)
Ух ты сборка данной модели. Отлично. Молодец.
Сенкию,,
One of the nicest looking foamies I have ever seen.
Tremendo trabajazo.
I finally got around to making the wing and as I feared, the foam does kink and break, despite my efforts to pre-bend it. I'll add material next to the kinks to restore the airfoil profile. Question: How are the flaps and aileron hinged? You show the vertical rudder and the rear stabilizer, but not the flaps and ailerons...😭
Are you using paper masking tape for bending? Flaps and ailerons hinged similarly rudder and elevator
@@NumaVIG Yes, next to severely rolling with a piece of pipe to pre-bend. My foam seems to be more brittle than what you use... Laminating film hinges it is. Currently waiting for the glue to set 100%, the HK Foam safe glue takes a long timeto set in my cold workspace.
Benar2 pengerjaan yg teliti....good job yesss
Great!!! Thanks for plans and isntructions!!!
The best channel, the best rc builder.
Cashier probably be like: "Ah yes a pack of foam board right?, as usual. That will be (insert price) please"
Really enjoyed your content btw, clean and beautiful work as always. : )
Wow this must be so satisfying seeing it all come together
Hi! I love your care and attention to accuracy in your builds.
I am planning a winter build of a Short Solent flying boat. They were traditionally white/cream in colour. Unfortunately, over the last few years it has become impossible to get white depron sheet, and I have grey (large) depron to use for the build.
Do you have any advice on how I would proceed with 'killing' the grey, and getting a nice white finish, please? Once again, thank you, take care,you and yours,
Den, Cymru (Wales)
white packing tape th-cam.com/video/LYlE4eCADIo/w-d-xo.html or acrylic paint 18:40
Top quality filming and work as always!
Great build , i would like to try that, my grand children would love to see it fly. Great video
the unique dislike is perfomed by Curtiss-Wright company!
Very nice and simple! have good flights.
are the two motors driven by a single channel or do they have differential controls?
can you put links for the electronics and brushless motors? on Banggood and Aliexpress, i have not found
many thanks
EDIT: at the plans link, in description, i have found all the correct links: thank you!
Google : MF1905 2400KV
Please clear out the servos for me - in the plans you stated 4 different servos (4.1g and 8.6g) but here 6 x 5g. i guess 6 pieces is the correct ammount, since we have rudder, elevator, 2 flaps and 2 ailerons? (question might seem lame, but I'm a novice in RC planes)
6 servos Wingspan 1,5m = 9g, Wingspan 1m = 5g
Brilliant project. Brilliantly shot.
Very nice and thank you for sharing the plans ,that's very nice of you
I really appreciate your videos, just want to give you my compliments! Keep up the good work
Please show how you setup your servos in flysky transmitter
Good job. I love planes
Proses Build sangat istimewa 👍👍👍🥰🥰
great video and a nice flying model. will be building one, are tip floats shown on plans and how have you routed motor wiring?
1) no
2) inside the wing
OK thanks, stagger wing looks good too.
Impressive! All the cuts are so precise!
Very nice video! Is it better to use 2 OPTO ESCs and a separate UBEC?
Спасибо! Никак не соберусь собрать свой самолет :)
сколько листов подложки для ламината требуется для сборки?
Thank you for the lovely video, all of the details in a simple package. I'm trying to track down an equivalent to Titan Wild Premium, could you tell me what type of glue it is, or name an internationally available option such as brown gorilla glue.
that's all what I know drive.google.com/file/d/1y4P_mmaOIs-ImgvzsAv0txpoMzZH-fEd/view?usp=sharing
Спасибо за столь подробное видео. Теперь хочу собрать свой первый пенолёт на базе этого.
А насколько обклейка скотчем ухудшит лётные качества? И нужен ли руль направления, часто ли им пользуются?
вот из такой же подложки обклеенный скотчем th-cam.com/video/8Dm0oQcbefs/w-d-xo.html и для первого гораздо лучше подойдёт, рудер нужен
Clean and neat, light!! great! do you have the plans in A0 original Format?
Hello Numa Vig! Sometimes it seems that your airplanes are made even more accurately than those laser cut and cnc cut kits 😍😍!
But where are you from?
Perfect and nice work 👍👍👍
Thanks for plans
Nice video and also beautiful plane, great job 👍
Did you really install a gyro into the plane ?
Thanks for the build video but I think it's really hard to try to do same thing, it lacks some importants step in my opinion.
Too bad we don't see how you proceed to install electronic parts (servos for rudder, elevator and flaps)
It seems you install magnets to close the electronic compartment.
Did you apply something on the plane before the water launching ?
However congrat for your building and your nice flight video !
rudder, elevator servos installation you can see in other my videos. This plane was partially painted, I usually cover with packing tape
@@NumaVIG thanks (what about the gyro ? did you install one ?)
yes
@@NumaVIG Could you tell which parts were painted ? and what kind of paint did you use (and varnish ?)
@@ryferhide only red and green parts (acrylic paint for art th-cam.com/video/mFf7-lFTLts/w-d-xo.html)
Another Excellant build.
Great video tutorial. Can I request for a war plane next time? Thanks. Keep up these good videos!
Excellent model and video.
Beautiful and inspiring!
can I use 3s-4s 2200 mah?
Superbly worked With great pasine it came out very nice Merits note 10 I would like to build it too Can you give me the plan please? Thank you
Bellissimo si potrebbero avere i disegni e il materiale usato ?
Saya suka cara kamu Assy, apa itu perekat UHU POR?
That is a great looking plane and I want to make it. Typically I have used 'blue fanfold foam', but I wanted to try this underlayment foam sheet. Sadly here in the USA I cannot find what you're using at my local Home Depot or Lowe's. :( Guess it's back to the blue stuff or FliteTest craft foam.
Check out modelplanefoam.com Excellent foam for models.
Buongiorno..nel video voli sempre con i flap abbassati perché è più stabile o per la bassa velocità? vorrei farlo per fpv, ma dato che il peso aumenta notevolmente ho paura che senza flap diventa instabile.grazie
excelent video very detailed work. googledrive link is good. thank you for share this proyect.
Very nice work :) greetings from Poland
Малорик! А что за клей используешь?
Very nice! Thank you so much for the free plans download!!!
Nice
Will you make a F22 raptor
Amazing plane. How do you make your plans?
A fantastic build mate thanks for sharing 👍
Good. I like it
I liked the model airplane. Could you tell us what tube glue you used to build the fuselage?
UHU Por
@@NumaVIG ok
My newly found, favorite channel
trust me he is great!
beautiful video
thanks for sharing the plans. could you create an A4 version ? I cant print on A3. much appreciated
I’m so going to build this. What kind of foam and glue do you use?
Can you make mirage 2000 free plan for rc (edf)
Хорошо постарался!!!! Спасибо было интересно!!!)
Only when I saw you cut the elevator, showing the 30 cm ruler, it dawned on me why my parts seemed so much bigger than what you show in the video... You're showing the 1.05 m span build, isn't it?
yes
@@NumaVIG Another question: I intend to use 80micron laminating foil to strengthen the surface of the Depron, can I iron it on the wing halves prior to bending the leading edge, or will that make the foam too stiff to bend properly?
just try and you will get an answer, I never used Depron
@@NumaVIG I call it Depron, but it's an underlayment foam similar to what you use. Downside is, it only comes in antracite (dark grey), so markings are hard to see...
On the 150 cm span version, did you make the ailerons in the same way as the flaps (using double girders), or do I cut them out after building the wing as shown?
Saludos desde España. Felicidades por el plano y la construcción. Muy limpios y sencillos. Llevo muchos años construyendo aviones de corcho y este plano me ha parecido una maravilla.
Si alguna vez lo piensa bien y quisiera usted, seria impresionante que creara un plano de un P-40.
Michas gracias por los planos y el vídeo. Esta tarde empiezo a construirlo. Ya comentaré como va.
Repito las gracias y mi agradecimiento.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍Excelente as always , thanks for sharing.!!!!
добрый день, за счет чего самолет летает так плавно, что разворачивается практически на месте? я собрал цессну и пятое падение она не пережила, я совсем новичок. управление было чересчур резким, как с этим бороться? ну а скорость видимо не уменьшить, так как иначе не хватит подъемной силы. как происходило ваше обучение полетам?
малый вес самолета при большом размахе, полный штиль, полет на грани сваливания с выпущенными закрылками, рулежка в основном рулем направления т. к. только хвост хорошо обдувается винтами, можно еще рулить моторами, но в данном случае они синхронны, элероны на малой скорости неэффективны, да и с большим креном легко свалиться. А учился я с гироскопом HobbyEagle A3 V2 и сейчас его частенько использую, т. к. постоянно новый не настроенный самолет, да еще порывы ветра
А чтобы самолет легко переживал падения, не надо ставить на пенопласт так всеми любимый и тяжеленный мотор 2212 и аккумы по 2000 mA
Стоит 2208 и аккум 1500, а про стабилизатор возможно хорошая идея
стабилизатор сам выравнивает самолет в 3-х плоскостях и управление становится не сложнее катера или машинки, даже с порывами ветра. Далее его можно прямо в полете отключить или снизить чувствительность (приемник нужен 6 канальный)
все равно слишком все тяжелое, метровая цессна без скотча грамм 200 весит, это все легко тягает 10 г. моторчик который можно долбать носом в землю сколько угодно, аккумы по 100г. тоже излишни, половина тяги уйдет на его таскание, и при падении разворотит нос запросто
What kind of foam are you using? can't find it on lowes
How does you Design all planes your finishing work is very good i am inpired with you
Perfect neat and clean project.keep it up broo.
Подскажите, какая ширина у лезвия на 8:26? И где можно приобрести?
9 мм это OLFA черные, самые острые , я в Максидоме вроде брал
@@NumaVIG спасибо! А то нигде не мог найти)
Which glue do you use. Asmr
Hey Numavig
I'm just about to make your plane, plans printed and everything ready, but I can't seem to find the plan for the engine mount?
engine mount it's a circle
@@NumaVIG i think i printed it wrong, that's where my mistake is. When you print in A4, so you print it in standard or do you actively choose to downscale it 70%?
What wingspan do you want to print?
@@NumaVIG i would like to print A4 at first.
@@scottleerhy8930 drive.google.com/file/d/1LHlU641vpYjbBkveQRxMwi8eSjHHiNlZ/view?usp=sharing
Muy bueno , cuanto pesa ? Como se llama el material y donde lo encontraste?
El avión completo pesa 480 g. Está escrito en la descripción del video.
El material, como se ve al comienzo del video, se encuentra en bricocentros y es poliestireno XPS (extruido, no expandido: es una esponja única, no un compuesto de bolas) utilizado como sustrato para pisos flotantes, cuesta muy poco y se encuentra en paquetes de 4-5 mm de espesor, en promedio, alrededor de 10 euros (aquí en Italia) como pegamento, recomiendo el UHU por, que no disuelve el material u otro similar
I can't figure out if there are 6 Servos in the list of accessories, what is 6 for?
Two for the flaps, two for the ailerons, one for the rudder and one for the elevator.
Спасибо за то что делитесь опытом и чертежами моделей. Как разрешат у нас радиоуправляемые авиамодели - обязательно с детьми будем делать каждую. К стати аэроглиссер шикарен, но бесколлекторный мотор слишком мощный для него, видимо по этой причине у Вас стоит обычный коллекторник...
что значит разрешат?
@@NumaVIG ну как объяснить проще, я живу там где идут боевые действия, любые полёты запрещены и могут принять за вражеский беспилотник с вытекающими последствиями.
saludos desde Mexico
hello and congratulations, how long for construction?
it depends on your skills
Where do you buy XPS material ?
Beautiful work!
hi, could you tell me where to download the plan, thanks
Hi from where you get your plane plans. Thanks
No more titan glue for this one? :) Good job
and the plans? where to get them
Great job. Thank you!
Plzzz tell which foam and gum do you use to make the plane. Plzzzzzzzzzzzz reply love from india
XPS
@@NumaVIG ohhh thanks for replying I have a request for u I live in india and here I am not getting that sheet so can send me that I will pay u plzzz 🥺 and can u give it email address for contacting u
amazon . co . uk
xps underlay | depron
But at the website there are saying it cannot be shipped to your area
How do you down load the plans?
Thank you for the plans & great video .. I print the plan on A3 paper but I think its too big. Are yours using A4 paper ?
A3 - wingspan 1,5m , A4 - 1,05m
@@NumaVIG thank you very much , I love all your slowfly plans
improvisation? where would we find the plan if we were to implement the project
in description below video
@@NumaVIG thanks
какой программой на листы большой чертеж режешь?
фотошоп
Могу использовать трёх миллиметровую, а не 5?
Полметровый самолетик можно, а так 3 мм подойдет только для обшивки крыла размахом не более 1,2 м. Даже сверхлегкий Slow Flyer был сделан на каркасе из 4 мм
nice! might build it after covid (im running out of foam)
Can you give me advice on how to download the plans, thank you.
link in description
Got it, thank you.
Amazing
We used to get a green depron sheet that even came in bog rolls of 50 meters called Selitac specifically for flooring that is far more malleable than std depron sheet but no one sells it here anymore :( it literally disappeared overnight replaced by EVA