How to make Lake Clipper RC slow flying boat DIY
ฝัง
- เผยแพร่เมื่อ 10 ส.ค. 2021
- Build video tutorial : How to make lightweight twin engine RC slow flying boat with sponsons at home DIY
RC plane specifications:
Wingspan: 1,8m (71")
Flying Weight: 552g (19,5 oz)
Material: XPS foam 5mm / Depron
Motors: MF2405-1300KV (28g x2)
Propellers: 8038 x2
Receiver: FrSky S8R (14g)
ESC: VGood 12A (14g x2)
Servos: EMAX ES9051 (5g x2), EMAX ES08D II (9g x3)
Battery: LiPo 1100mah 2S 7.6V (44g)
Lake Clipper water motor glider free plans: numavig.com/plans/lake-clipper/ - แนวปฏิบัติและการใช้ชีวิต
I have yet to watch a NumaVig video without having learned something new. And I've been building foam for 10 years. Absolutely fantastic stuff man.
Finished the enjoyable build last week, and performed the maiden yesterday. VERY VERY nice! Well done, sir.
Fun to see you're still making stuff.
Looks great!
Fantastic attention to detail and precision. I'm amazed how light it is for its size.
Thanks for the walkthrough great job 👏
Never got bored watching your videos 😁
Excellent Workmanship!
Grazie, per aver condiviso ancora una volta il tuo fantastico modello. Ciao.
Great job...
Love these planes.
Oh man, that'beautiful. Superb design. Nice engineering. Perfect building. I love.
Yes! Excellent job!!!
amazing wing building technics
excellent model! I appreciated the greater care you put into the construction of this compared to previous models, especially in the construction of the ailerons, congratulations!
Yes, those were a rather fascinating build.
Merci de tout partager, vous êtes vraiment très fort et très habile.
Très bon travail. Merci.
Yes he is back and in big style, planes, are awesome, great job bro, keep it up.
Спасибо большое дорогой друг 🤝👍👍👍
Expert foam mechanic this video
Very nice build, Thumbs up.
Nice job, congrats...keep the good work
Красивая работа, снимаю шляпу
Очень достойно! Молодец!!!
He is finally back!
Great!
Great plane
Excellent Work. How do you draw plans ?
How much payload can it carry?
awesome 👍
Seus aeromodelos são incríveis. Parabéns, disponibiliza seus projetos? Brasil
please could you do a vid of how are you making the plans of your planes ? It would be very cool !
I make a DIY seaplane model and call it ORCA, it is aggressive sport seaplane with with two e-Max 2300kV motors on 4S1500mA Black Label battery. Like your build! I recommend it for DIY in my Facebook group.
Which glue is best for xps foam sheet
Начал скупать жлектронику на ALIEXPRESS/ Хочу спросить а почему рулевые машинки у вас не все однотипные а двух сортов ? СПАСИБО
What do you build with exactly? I can't find the foam you showed in the extra 330 vid at any stores here. I usually build with dollar tree foamboard. Would that work?
Would you make a A-10 thunderbolt ?
Классній материал у вас плоский ровній. Я смотрел на нашу подложку под ламинат тольщиной 5 мм она с одной стороні сильно рефленая. Попробую поискать что то плоское ровное
Do you have a non tiled plan ?
Распечатал чертежи, буду приступать к сборке планера
What's a good Depron substitute, for those of us living in the US were the stuff is very hard to come by?
Where do you get the foam from?
What's the controller and list of materials
This is fabulous! And I have started building it too! But it need a few tips (length of the balsa struts, etc...) Any way I can contact you please? Or directly here maybe? thanks in advance ! And thanks for the free plans!!
measure the printed wing template
@@NumaVIG Great thanks! So its 85cm long (twice, one for each side) and another 75cm long strut (twice...) for the top strut.
@@NumaVIG Yes thanks I did ;) got that
Еще один маленький вопросик. Я раньше не видел такого способа крепления пропеллера на моторе. Вижу вы применили пропеллеры типоразмер 8043 Подскажите как при покупке пропеллеров не лохануться со способом их крепления на моторы ?
я специально для этого дал ссылки на все необходимое
@@NumaVIG Я воспользовался Вашими ссылками.Да это облегчило задачу. Я БЛАГОДАРЕН ВАМ. Просто там пропеллеры какие то флюорисцентные, я думал купить черненькие или оранжевые. Я так понимаю моторы нужно выставить вращение в разные стороны и пропеллеры нужны парой CW CCW ?
So another question (since you are so kind to answer here ;) : I have 6mm thick foam panels. When I bend one to make the wing it breaks. (it has much less suppleness than yours apparently). How thick is yours for the wing please?
read the description: 5 mm!!! and use pipe and masking tape as shown in the video!!! or glue it th-cam.com/video/cNMn8gUhUXU/w-d-xo.html
@@NumaVIG I did I did :( (you also say to use 5, 3 or 6mm). I think I will try your other method: gluing it as 2 parts (upper part and lower part) wing.
Once again thanks for all your great tips!!
Hello I loved that model. What kind of glue is the one you are using and how long it takes to apply the glue. A great greeting from Buenos Aires.
✈✈👍😎👍✈✈
3:10 left top
NumaVIG can Your next plane be a small one? Please?
✋️😎🤚
you can print my plans in any scale you want (75%, 50% or...)
Автору. Распечатал чертеж на стандартных листах офисой бумаги А4. При склеивании если клеем ПВА промазываю край для склеивания бумага мгновенно намокает и брызжится. Деформируется. И становится почти невозможно акуратно состыковать два листа. Подскажте как Вы выходите из такого положения.
Спасибо за поддержку.
Надо распечатывать на картоне.
Complimenti, bellissimo ed il video è fatto molto bene..ma le ali sono in depron da 6mm? grazie
5mm
Ok grazie mille.. inizierò a costruirlo👍
Две рулевые машинки на єйлероны, третья руль направления 4_тая руль высоты. А еще одна куда ? СПАСИБО за ответ.
руля высоты два: левый и правый
And another: why 3 servos on the middle of the aircraft? (I understand 2 for rudder and elevator, and 1 in each wing for the ailerons... Why a third? Thanks!!
2 servos on elevator
@@NumaVIG Really! Wow! ok is that for less flutter?
я не совсем понял а третья сервомашинка в фюзеляже для чего? 1. Руль направления, 2. Руль высоты, а 3?
Поплавки должны быть паралельно крылу или они свобоно вращаются?
руль высоты из 2-х частей с отдельными сервами, спонсоны приклеены
How big is the gap between the 2 wing halves when you fold it over at 9:43? Im having trouble making the wing fold into an airfoil because I think I made that gap too small
th-cam.com/video/YqgAL4OHaU4/w-d-xo.html
@@NumaVIG Im just finishing this plane, but I can't find anywhere saying the center of gravity range.
@@benm5902 www.flitetest.com/articles/where-should-an-rc-airplane-center-of-gravity-be
Сколько полезного груза может нести?
полкило
А не слабоват ли киль в один слой пенопласта?
полоска карбона
Can You Made a Mitsubishi A6M Zero?
There is no shop in our island so that we can buy all the materials
При печати буду выводить на листы А4 склеиватьи вырезать заготовки. Подскажите как проверить что размер распечатанного соответствует правыильному размеру ? СПАСИБО.
перед каждым чертежом написано Print in actual size (100%) 100% это Масштаб
@@NumaVIG Конкретно на чертеже этого двухмлоторного гидроплана написано что он дляч печати на листах формата А3. У меня нет принтера для печати на А3 буду печатать на А4 , склеивать листы и вырезать детали. Спросил у вас чтобы понимать не накосячил ли я при танцах с бубном при переносе А3 на А4
@@AlexanderBessalov я никогда не печатал листы A3 на принтере A4 и для таких вопросов есть Google
@@NumaVIG ну простите что вас напряг своим глупым вопросом.
А как распечатать на стандартніх листах А4 ?
What is the 5th servo for?
right and left elevator
А что в мешках для веса ?
Песок
Круто, но сложновато)
На самом деле все наилегчайше
Главное с пенопластом качественно работать а електроника поверь очень легко
А ты русскоязычный?
Кто я?
Мужик, где ты берёшь депрон?
это не Депрон, а обычная подложка под ламинат
@@NumaVIG я пробовал синюю 3мм, она при краше разбивается как стекло, в отличие от потолочки, которая сминается. Что за производитель у тебя, как себя ведет при ударах?
@@nikolaikarev8672 Solid куплена 2 года назад, ведет себя отлично, гнется без скотча, но разные партии могут сильно отличаться
@@NumaVIG спасибо, будем пробовать!
#NumaVIG? You say: "Flying Weight: 552g" ! I have a final weight over 1kg!! electronics and battery included...? Is that normal? Anyway I have finished the Lake Clipper.... It's great!
may be different density of foam, my white XPS sheet 1200x500x5mm weighs 80g
@@NumaVIG thanks I will check mine... anyway... the Lake Clipper take's off!! I am thrilled! thanks a lot.. I will post it soon!
260g per sheet 6mm 1250x800mm. Hence: Mine is almost double yours!! 162% your weight! strange! Anyway IT TAKES OFF!!! It's all that counts so thanks!
Is it possible to get full dxf plan ? There is only A3 tile plan at website.
I don't have dxf files for this plane, for vector files I will have to make a 3D model with mortice and tenon joints and it won't be free
But you have one ark file ? Also A4 would be help. I just cant do much with a3 tiles.
no, I don't have ark files, www.google.com/search?q=how+to+print+a3+on+a4+printer
did anyone else see the "do is yourself" poster at the end???
do a boeing 737 please man
Moter kv rating
Please next time make a Messerschmitt Bf 109 (German fighter)
А как скачать рисунки выкройки.
в описании под видео
@@NumaVIG
Can u give us full dimensions from the start
you can print plans in any scale you want
@@NumaVIG how bro ?
using printer
@@NumaVIG ohh man I hadn't seen the photos u given in the link
😂😂😂
Thanks for support
Well I subscribed u today after watching your amazing contact and quality of work.❤️👍👍
information. as a result of the high-located mass of two motors, there is (some) top-heaviness in the dom of this design. distribution of mass. this condition SHOULD be mitigated, by the use of a heavy battery or ballast mass; located low, and vertically aligned with twenty-five percent of chord. googletranslate
Make Messerschmitt bf109 rc plane
Would you contact me on an IDEA?
Ты русскоязычный???
да
Gran precisión y mucha paciencia , por eso vuelan tan bien sus realizaciones .Bonito modelo. Muchas gracias.
Начал делать гидроплан. Все по ссылкам купил на алике. Распечатал Ваш PDF файлик через просмотрщик PDF XChange Viewer, он позволяет большой документ распечатывать на А4 и склеивать. При печати указал 100%. Ваш чертеж 7 страниц.При апечати на листах А4 каждая страница чертежа складывается из 4х штук листов А4 Хотя на вашем сайте указано что Ваш чертеж на листах формата А3. Лист формата А3 должен складыватся из двух листов формата А4.
Что я сделал не так ?
все верно A3 это два листа A4 это можно было узнать изначально, у форматов бумаги есть четко заданные размеры не только в пикселях но и в сантиметрах и 100%(реальный размер) это 300 DPI (пикселей на дюйм) Линейка в хозяйстве имеется?
@@NumaVIG Ну конешно и не одна. Я для удобства построения самолета купил еще и метровую металическую на всякий случай. Я резак сделал как у Вас из деревянного брусочка и лезвие зажато болтиком. Я сделал из двух кусочков алюминиевого уголка 30х30х1 мм
@@NumaVIG Дак Вы поможете определиться с размером при печати ?
половинка крыла 90 см распечатал - померил
@@NumaVIG Спасибо
Привет
О Русский
at 12:19, a dihedral wing is SUPPOSED to have a FUSELAGE-spanning CENTER SECTION.!!!!! in other words, a wing Typically consists of three sub-assemblies: a CENTER SECTION, to which two wing halves are attached.!!!!!! googletranslate
Sir can i get your mail id
do a boeing 737 please man
do a boeing 737 please man
do a boeing 737 please man