This is a package opener feature on the large flat screwdriver tool. One important thing to note: this is truly a ONE HAND multi-tool (Px, Tx, Kx) for all tools. Leatherman has shown its great capacity for innovation and engineering with its FREE models.
@@hvacbudget8600 The FREE models have been widely but unfairly criticized. It is true, however, that it should not be placed on iron filings :) Come on, I dare, a marvel of engineering.
I have both the surge and the wave and the p4 is my favorite as a practical edc multitool. One hand operation and easy deployment are advantages that I will never go back from again. Had huge anxiety that I was going to miss the bit holder but haven’t even once actually needed it. Free is by far my favorite multitool and I bet if you use it for over a couple weeks you will agree. Side note: fidget factor is 100/10
This has been my every day carry at work and away from work for about 8 months now and I love it. I mostly use it over the surge for the one handed operation. I work in residential construction and I mostly use the serrated knife for package opening, the large flat and phillips drivers and the scissors. But its been great for me so far
I totally get that! I switched from the Surge to the SOG Poweraccess Assist for testing purposes and one of the many things I love is the outside opening toolset.
Comments to drive engagement, you’re really helping me put together the proper multi tool for my front desk job at a hotel right now I’m looking at a Gerber mp600 blameless! But really excited to mod a wave to have no blade other than scalpel for a removable blade, definitely grabbing that wave t shank adapter
One hand operation including deploying all tools is a must if you are holding whatever you are working on. The flat Phillips is sturdy and works great on small and medium screw heads.
Been carrying mine for 2 months or so, whenever i got pants on, with shorts i dont carry it. But ive gotten made a custom made Horizontal leather sheath for it, and removed the pocket clip. I freaking love it. Ive taken a dremel to most sharp edges, i found it to have WAY too many hotspots out of the box, but ive fixed it now. I just love that P4 :)
@@hvacbudget8600 Well im not considering ever getting rid of it, i used the tool for a week, then decided its a keeper, and took the dremel to it and got the sheath specially made :D
This is a great tool for older folks like my Dad and his best bud who are now in their early 80's.They still have their 1st gen Leatherman tools and wear them every day. Now that they are having tactile issues, I am building them both a tricked out P4 with the bit holder from zapwizard. Doing offset colored cutter blades, and cool pocket clips from Donk. I am also getting them each bit kits and ratchet drivers (when they are back in stock at a reasonable price) Lol Amazon is gauging them for $68 at the moment so $74 with tax or so. Meanwhile I will keep fiddling with their P4's so they are butter smooth when I gift them.
@ Hvac Budget any thoughts on additions or extra items such as a micro light that would fit in one of the sheath tunnels? I am ditching the stock grey sheaths for the black ones to accommodate the bit kits and ratcheting bit driver.
That sounds like an amazing project and very thoughtful! I love how it's turning out! As far as a light I'm not sure, there aren't many good options. Klecker knives made a stowaway flashlight that is nonchargeable but it is compact. You might be able to use 3M tape they use with the niteize clip and attach a very slimline light to the sheath.
@@D-Man-lv9vu It's discontinued but still sold on Amazon and eBay through old stock. There are several keychain micro or nano lights. And Royvon sells some amazing keychain rechargeable lights as well but they are thicker profile.
Another great review. I have the P4 - it's brilliant. Very smooth opening, a good tool selection, pocket clip, all locking tools, relatively compact (although still weighty), nice scales & looks pretty sleek too. What's not to like...?
I honestly don't see a reason why people heavily criticize this model. I think it is great tool, and the one hand functions are amazing for those who need it.
@@themightychippy3756 The heritage PST is another option. Some of the older Gerber's were no locking as well. Even some of the older SOG pocket power pliers were non locking but pretty nice tools!
@@themightychippy3756 Gerber MPT Gerber Original Multi Plier Leatherman PST Leatherman Mini Tool Leatherman Bond SOG Pocket Power Plier SOG Power Plier SOG Para tool I believe these are all non locking. The Leatherman fuse, blast and kick I can't remember if they lock or not.
People either love ‘em or hate ‘em, and the ones that hate ‘em, don’t like the magnetic architecture because they work around metal shavings, etc., and I get it. Then there’s the wobble, and I get that, too… but I find them very unique. 👍🏻
If they switch out the serrated blade for a file and then replace the file with a small serrated blade like on the sidekick which is perfectly capable of cutting rope then this tool would be great. Also add the ruler to the large flat head and make the ruler something else like a chisel or something. Oh! and also make a proper awl! I dont need 5 flat heads! I barely need one... then the tool would be great
@@hvacbudget8600 me too. leatherman should just update the P4 to use the existing bit adapter and i shall move all the bits, the rotating ratchet and the extender from my surge to the P4. lol
@@hvacbudget8600 by the way, my SOG poweraccess assist has reach local courier agent. Going to pick it up tomorrow. Gerber diesel arrived 2 weeks ago. Green splice and red clutch probably have to wait till next week. Then i can have a "family photo". lol
I had a P4 since they first came out. It was a birthday gift so I will keep it but I really don’t like it in its current form. The scissors aren’t very good compared to a Victorinox, the lack of a bit driver is a deal breaker and the file is not really very useful. Also, I tried to use this tool but I’m around a lot of metal and metal filings and it gunks up pretty easily. That in and of itself isn’t a dealbreaker but it’s just one more problematic thing. If they added a bit driver and replaced the saw with a blade exchanger ala the Surge, I’d definitely be interested. Otherwise it’s a mediocre tool at a premium price.
@@hvacbudget8600 yep. I have it and installed it. Unfortunately, it doesn’t seem like it’ll last under moderate torque. I’ve seen mine flex. It also doesn’t fix the file issue.
@@dalecarr5445 Interesting. Zapwizard on shapeways also sells the t shank adapter which would give a file option. That is to bad the bit adapter seems flimsy.
@@dalecarr5445 You're right it is more involved and it doesn't hold a file. I just assumed a t shank would hold a file but it sounds like it's just jig saw blades.
I dont like the wiggling handles. Also weight can be a sign of strength too. This is not something you gonna use while building your house or garage and they never advertised it as such a tool. It is a hobby tool for people who occasionally do something other than watching tv. Nice review though.
Free p4 Is the Better leatherman multitool and the more practical. Despite woht evryone say in America. The tools are very practical and design Is a real revolución in multitool world. Is the only leatherman Almost comparable with Victorinox swisstool quality. If It wosnt for the usual leatherman poor and soft pliers steel. Specially in the pivot. After few hard wire cutting muy free p4 be came with a horrendous play in the pliers. Worst than MY others leatherman. With a Little mod in the Phillips screwdriver i can use the leatherman bit adapter. Leatherman must absolutley improve steel quality or Heat treatment. Pliers are ti soft and rapidly take a indecent Play. And the theets Always bend. If leatherman put on pliers the same steel of Victorinox pliers maybe can be comparable. And only in free series.
Sheath went immediately into the trash. Why tf can’t it ship with a Portland-made sheath? I will pay extra, guys, jc I just paid $150 for a Portland-made multitool 🙄
I haven't read, heard, or seen anything that convinces me that the Free series is anything more than a collection of toys. The serrated blade is actually pretty good, but the rest of the tools are jokes in search of a punchline. They have the balls to charge $150 for this POS? Shame on you, Leatherman.
This is a package opener feature on the large flat screwdriver tool.
One important thing to note: this is truly a ONE HAND multi-tool (Px, Tx, Kx) for all tools.
Leatherman has shown its great capacity for innovation and engineering with its FREE models.
Thanks for the info! I really appreciate this tool a lot more since I've carried it.
@@hvacbudget8600 The FREE models have been widely but unfairly criticized. It is true, however, that it should not be placed on iron filings :) Come on, I dare, a marvel of engineering.
Yes of course..Shame for the bad quality of steel respect to Victorinox pliers.
I have both the surge and the wave and the p4 is my favorite as a practical edc multitool. One hand operation and easy deployment are advantages that I will never go back from again. Had huge anxiety that I was going to miss the bit holder but haven’t even once actually needed it. Free is by far my favorite multitool and I bet if you use it for over a couple weeks you will agree.
Side note: fidget factor is 100/10
It's pretty great!
The Leatherman free p4 is a pretty good multi tool. It will do the job. 👍
This has been my every day carry at work and away from work for about 8 months now and I love it. I mostly use it over the surge for the one handed operation. I work in residential construction and I mostly use the serrated knife for package opening, the large flat and phillips drivers and the scissors. But its been great for me so far
I totally get that! I switched from the Surge to the SOG Poweraccess Assist for testing purposes and one of the many things I love is the outside opening toolset.
@@hvacbudget8600 still waiting for my Access Assist to arrive. Say I have a question for you on this set of post threads.
I just picked up a Free P4 last week. I’m loving it so far. The pocket clip and one hand blade are important for my EDC.
Great! I was shocked how light it is to carry.
I love the free series. The P4 is my most carried multi-tool. Appreciate your videos.
Thanks for watching!
Comments to drive engagement, you’re really helping me put together the proper multi tool for my front desk job at a hotel right now I’m looking at a Gerber mp600 blameless! But really excited to mod a wave to have no blade other than scalpel for a removable blade, definitely grabbing that wave t shank adapter
Very cool!
One hand operation including deploying all tools is a must if you are holding whatever you are working on.
The flat Phillips is sturdy and works great on small and medium screw heads.
Been carrying mine for 2 months or so, whenever i got pants on, with shorts i dont carry it. But ive gotten made a custom made Horizontal leather sheath for it, and removed the pocket clip. I freaking love it. Ive taken a dremel to most sharp edges, i found it to have WAY too many hotspots out of the box, but ive fixed it now. I just love that P4 :)
Sounds great! I really like that you've made it so it works good for you.
@@hvacbudget8600 Well im not considering ever getting rid of it, i used the tool for a week, then decided its a keeper, and took the dremel to it and got the sheath specially made :D
@@steffenfisker7577 Very cool!
This is a great tool for older folks like my Dad and his best bud who are now in their early 80's.They still have their 1st gen Leatherman tools and wear them every day. Now that they are having tactile issues, I am building them both a tricked out P4 with the bit holder from zapwizard. Doing offset colored cutter blades, and cool pocket clips from Donk.
I am also getting them each bit kits and ratchet drivers (when they are back in stock at a reasonable price)
Lol Amazon is gauging them for $68 at the moment so $74 with tax or so. Meanwhile I will keep fiddling with their P4's so they are butter smooth when I gift them.
@ Hvac Budget any thoughts on additions or extra items such as a micro light that would fit in one of the sheath tunnels? I am ditching the stock grey sheaths for the black ones to accommodate the bit kits and ratcheting bit driver.
That sounds like an amazing project and very thoughtful! I love how it's turning out! As far as a light I'm not sure, there aren't many good options. Klecker knives made a stowaway flashlight that is nonchargeable but it is compact. You might be able to use 3M tape they use with the niteize clip and attach a very slimline light to the sheath.
@@hvacbudget8600 thanks!
I'll check out the Klecker and see if it's feasible.
@@D-Man-lv9vu It's discontinued but still sold on Amazon and eBay through old stock. There are several keychain micro or nano lights. And Royvon sells some amazing keychain rechargeable lights as well but they are thicker profile.
I like my P2 its perfectly fine and the implements work well, the problem is a lot of people are to fussy, haha!
Very true.
Another great review.
I have the P4 - it's brilliant.
Very smooth opening, a good tool selection, pocket clip, all locking tools, relatively compact (although still weighty), nice scales & looks pretty sleek too.
What's not to like...?
Exactly!
Good review. I will be looking forward to some of your comparison videos. This is on my shortlist for a possible multitool Christmas gift.
Thanks for watching! It will be fun to compare this to some other great multi tools!
So you want us to pay you to buy multi tools? Lmao 😂 🤣 😂 🤣 😂
I honestly don't see a reason why people heavily criticize this model. I think it is great tool, and the one hand functions are amazing for those who need it.
I agree.
Great presentation mate. Merry Christmas & safe New Year.
Thank you! Merry Christmas to you as well!
Do these models have locking blades?
Yes.
@@hvacbudget8600 ah shame, currently looking for a UK legal multitool. Seems my choices are nextool black Knight or leatherman bond. Bit limited
@@themightychippy3756 The heritage PST is another option. Some of the older Gerber's were no locking as well. Even some of the older SOG pocket power pliers were non locking but pretty nice tools!
@@hvacbudget8600 I shall check these out! Thanks so much! If you think of any others please let me know!
@@themightychippy3756
Gerber MPT
Gerber Original Multi Plier
Leatherman PST
Leatherman Mini Tool
Leatherman Bond
SOG Pocket Power Plier
SOG Power Plier
SOG Para tool
I believe these are all non locking. The Leatherman fuse, blast and kick I can't remember if they lock or not.
Carried mine for over a year, and haven't seen one that could replace it. The magnets pick up grinding dust and metal shavings is my only gripe
Great to hear the review. Hope it keeps working good!
Thanks buddy, keep making videos!
People either love ‘em or hate ‘em, and the ones that hate ‘em, don’t like the magnetic architecture because they work around metal shavings, etc., and I get it. Then there’s the wobble, and I get that, too… but I find them very unique. 👍🏻
I agree! There always is room for improvement but for the size and weight it's pretty impressive.
Looking at the Wave+, Surge, Charge, or P4 after getting the T2.
Those are all fantastic tools!
Yah iv chipped those Phillips heads on a door jam before. After that I'm weary of those particular Phillips
Wow, that's to bad!
Great review and comparison
Thanks for watching!
If they switch out the serrated blade for a file and then replace the file with a small serrated blade like on the sidekick which is perfectly capable of cutting rope then this tool would be great. Also add the ruler to the large flat head and make the ruler something else like a chisel or something. Oh! and also make a proper awl! I dont need 5 flat heads! I barely need one... then the tool would be great
It would be neat to see some new options.
prefer the p4 than the other leatherman that i have. If i edc leatherman, will always be the p4. Price is getting more expensive now.
I love my P4!
@@hvacbudget8600 me too. leatherman should just update the P4 to use the existing bit adapter and i shall move all the bits, the rotating ratchet and the extender from my surge to the P4. lol
@@nitric75 Sounds Great!!
@@hvacbudget8600 by the way, my SOG poweraccess assist has reach local courier agent. Going to pick it up tomorrow. Gerber diesel arrived 2 weeks ago. Green splice and red clutch probably have to wait till next week. Then i can have a "family photo". lol
@@nitric75 That sounds great!!
😀😀😀cool
I had a P4 since they first came out. It was a birthday gift so I will keep it but I really don’t like it in its current form. The scissors aren’t very good compared to a Victorinox, the lack of a bit driver is a deal breaker and the file is not really very useful.
Also, I tried to use this tool but I’m around a lot of metal and metal filings and it gunks up pretty easily. That in and of itself isn’t a dealbreaker but it’s just one more problematic thing.
If they added a bit driver and replaced the saw with a blade exchanger ala the Surge, I’d definitely be interested.
Otherwise it’s a mediocre tool at a premium price.
There is a second party bit driver option by I believe zap wizard that he sells for the P2 and P4. Could help with the tool set.
@@hvacbudget8600 yep. I have it and installed it. Unfortunately, it doesn’t seem like it’ll last under moderate torque. I’ve seen mine flex. It also doesn’t fix the file issue.
@@dalecarr5445 Interesting. Zapwizard on shapeways also sells the t shank adapter which would give a file option. That is to bad the bit adapter seems flimsy.
@@hvacbudget8600 I haven’t tried the T-shank adapter. Does it require modification? For some reason I thought it required a mod.
@@dalecarr5445 You're right it is more involved and it doesn't hold a file. I just assumed a t shank would hold a file but it sounds like it's just jig saw blades.
love my p4 :)
Nice! It's a good tool!
I dont like the wiggling handles. Also weight can be a sign of strength too. This is not something you gonna use while building your house or garage and they never advertised it as such a tool. It is a hobby tool for people who occasionally do something other than watching tv. Nice review though.
Disagree, it's a reasonable tool for construction work.
@@GeertSawek it may be.
Completely disagree based on seeing multiple people build stuff using a free series.
It would have been better if it had a bit exchanger instead.
And the file is almost useless.
Noo then you lose bits
Free p4 Is the Better leatherman multitool and the more practical. Despite woht evryone say in America.
The tools are very practical and design Is a real revolución in multitool world.
Is the only leatherman Almost comparable with Victorinox swisstool quality.
If It wosnt for the usual leatherman poor and soft pliers steel. Specially in the pivot. After few hard wire cutting muy free p4 be came with a horrendous play in the pliers. Worst than MY others leatherman.
With a Little mod in the Phillips screwdriver i can use the leatherman bit adapter.
Leatherman must absolutley improve steel quality or Heat treatment.
Pliers are ti soft and rapidly take a indecent Play. And the theets Always bend.
If leatherman put on pliers the same steel of Victorinox pliers maybe can be comparable. And only in free series.
Sheath went immediately into the trash. Why tf can’t it ship with a Portland-made sheath? I will pay extra, guys, jc I just paid $150 for a Portland-made multitool 🙄
Who cares? It works
@@GeertSawek umm, someone like me who pays more than I have to for American-made tools, and, you know, keeps this company in business.
I haven't read, heard, or seen anything that convinces me that the Free series is anything more than a collection of toys. The serrated blade is actually pretty good, but the rest of the tools are jokes in search of a punchline. They have the balls to charge $150 for this POS? Shame on you, Leatherman.
I don't like that they are a filling 🧲. They have too many 🧲 to collect every metal shavings in the immediate area.
And the ✂️ aren't as good as others like the one in the surge.
And I don't like the comb blade either. You can get a straight blade in the p-2 though.