For GTX 1660 Super, the best settings for great visuals and frame rate are: Overall quality = High FSR3 frame generation ON Make sure to turn dynamic resolution scaling OFF or it's not going to run smoothly at all...
Been trying to use fsr3 + frame generation with my 1660ti, but the game crashes when I activate them. If I disable fsr3 and use only frame generation, the game crashes after a few minutes of gameplay.
@@damboi8528 yea i have a dual 4090 setup with 120 GB of Ram and a 64 core cpu and its still having trouble i just think the game is just bugged and no i did not pirate the game i mean i can play cyberpunk 2077 in 8k no problem never drops below 144 fps
nice! went from average 40 to buttery smooth 130-144. It set everything to max settings by default for some reason and I didn't wanna go through figuring out which ones mattered
*Useful Information* So if anyone is struggling to select a perfect Anti aliasing for them or wanna use upscaling but don't like the blur and all, here's the solution: While testing on my own about graphics and performance I really wanted to shift to dlss cause smaat2x and taa are too shimery and after a little gagging and stuff I found the thing that can solve it --> Nvidia Image Sharpening and Radeon Image Sharpener. I was not performance hungry really wanted to use dlaa but didn't like the blur but this was a game changer Using sharpening of *0.20 - 0.30* with ignore film grane on zero on my rtx 3080 changed it all, the game looked more crisp and the blur was tackled. I tried and used dlss and boom the game looked like native but more smooth. So try using this range of Sharpening specified For only (DLAA, FSR3 or TAA) use Sharpening 0.20 - 025 For Upscaling use 0.25 - 0.30 The range may vary for different resolutions (I use 1080p) but keep in between 0.20 - 0.30 and use ignore film grain to 0 anything more is oversharpened
game is super well optimized, nixxes did it again, i have rx 6800 non xt , and running this game on maxed settings with fsr 3.0 on dynamic, game runs even above 1440p upscaling closer from 2000p i think and still hit very stable 60fps, what a joy to have well optimized game these days. and its not super heavy on my old r5 3600 cpu too like it was on horizon forbiden west :) 16gb vram also great stuff, in few zones ive seen above 13gb vram usage so i feel so safe
@@sebthegoat301 use vsync, either from andrenaline or nvidia panel or native game vsync it removes tearing, also make sure you set your native monitor refresh rate on dynamic upscaling, if its 60hz set it to max 60, it also helps a lot, i have no tearing cause of these
Thank you! I’m always quite skeptical of recommended specs. A lot of games I play on higher fps/resolution on less intensive specs than what it is stated.
Despite getting 70-80 fps (on a 144hz screen) the game feels choppy and there is a lack of smoothness that is present in other games like God of War 2018, Marvels Spiderman etc ?? Is there any fix ?? I am running this game on an Asus Rtx 4060 8GB GPU Laptop with i7 12700H.
I love Ghost but this game is just too erratic in frames. I’ll be getting 100-115 fps on custom with the only thing being on very high is terrain detail everything else is high, and I have frame generation on. And just out of nowhere the frames will drop by like 50 and stay there it’s so weird. I’m in a 4060ti(8gig) with 32gigs of DDR5 Ram.
I have the same problem with a rx7900gre ok everything on very high settings, I have native fsr but I’m using fg I get 13-150 but in some specific points of the map I have terrible fps drops, only in this game
My pc has an rtx 3060 which isn’t able to use frame generation. Weird though because it gives me the option and when I select it I get consistent 90 fps with everything on very high.
i have a rtx2070 my fps increased by around 30% with amd fsr 3.0 and future frame genration but somehow the game feels more laggier than wo those settings why?
I’m pretty sure I have the same pc specs as you but my cpu is heating to around 81 and will eventually crash. Any advice on how to fix the cpu temp for this game? I’m about 39 hours in and only crashed twice.
@@Lloyd-Franklin No I mean do I have to download any driver or something. Because turning on the frame generation didn't give any considerable increase in the fps rate.
@@erkuza9220 Actually it does. Just adapt and change the timing lmao. I've been doing it just just fine. If it affects yo so much then just dont turn on the settings lmao
Playing on a 5600,rx 6600xt fsr&upscaling(on) my gpu temp rises to 80 where eventually the game crash,on the same spec(youtube),I didnt notice any gpu temp rise,what could be the main prob here?also my game is dl from freesite
Is it possible to turn Fsr3 FG on and then lock the fps to 60? Cause whenever i do it in other games (such as robocop) the game feels like 40-50 frames
@@Luca-rc4bn thanks so much for recommending riva , it did the job but when i locked it to 60 , again it felt like 50-ish . But i locked it to 75 and now feels alright. Thanks a lot, much appreciated 🍻
I don't have this game, I never heard of this game, I don't plan on playing it but I stayed and watched the whole video only for this handsome man and his voice.
i cant seem to run the game with frame gen even with my high specs im getting stutters (7800x3d & 7900xtx) without the stutters i do get 100+ fps but i get those stutters every 20 seconds
lol i did a comment for some people and wow i was playing the game and didn't realize i had my computer set to only use 1 processor and i limited my ram for when i was playing arma i feel like such an idiot i was checking my device manager and only one thread was running out of the 128 i have lol god sometimes its best to remember when your drinking to check your settings before playing games because i like to set mine to low setting if im watching a movie or anime just so my computer doesn't overheat but i still got my extra fan to stop that but because my room tends to get down to about 20 to 30 degress at night and around 50 during the day it still stays pretty cold and if your seeing my ip i do not live in los angeles just so you know
Fsr 3 frame generation causes the game not to launch for me. But I’m on an older system. I7-6700, 1070 and 16gb ram. Plus installed on HDD. But so far on high settings I’m getting 45-60 fps. Only played opening scene so far tho
@@akashpaul7739 if I turn it on in game after launching it actually works great. Except some cutscenes have weird scanline type things occasionally but other than that I go from 40ish fps to 60-80
@@noot8076 I have one but only 120gb and most of that is taken up by windows software and other launchers/programs etc. I have been wanting to get a new 1tb one at least. Just in a tough spot financially for a few more months
@@Swanny098 i experience that scaling thing in cutscenes when fsr3 upscaling is on but its not an issue...the main issue is frame generation....it crashes the game during cutscenes and while opening the menu....i hope they fix it because the fps boost from frame generation is really helpful
Thank you! I had all settings set to Ultra and was having trouble consistently maintaining 60-70fps. With your configuration now the game works above 165fps for me! (1440p with DLSS Quality and FG, but without any of that the game still runs at 100fps) It's incredible how a good configuration greatly increases game performance
there's no setting for it currently but I remember this being a setting you could turn off in wo long: fallen dynasty, something like camera delay or offset right? Where you turn the camera but it's not instant and it feels slow.
It's insane that you can use both DLSS and AMD Framegeneration in this game. Been playing Cyberpunk: Phantom Liberty with frame gen. mod that way, and I prefer to play like that on my 1440p 240hz monitor 🤌
@@lokedd that's...not related to nvidia lmao fsr 3 works on everything. it's a bug with the game right now which they'll hopefully fix soon. fsr 3 is usually the best option for any gpu since dlss only works on premium nvidia cards.
@@lokedd same here, you have to leave FG off until you get to the main menu, then go into settings on turn it back on. if i dont do that my game crashes on startup.
dude has a face of ryzen 7800x3D and a voice of RTX 4090. beautiful man
🤔 Thanks 😂
lmao what a comment :D
you made him more powerful with that comment
I'm stealing this compliment
get a room for you two already
If i had this guy's voice i'd never shut up
Has a good voice for radio, that's for sure.
He got an amazing voice so soothing to hear
Sounds like every other guy in London but okay.
@@uhuh9595 not in London no
@@uhuh9595 You're just jealous man, soak in the glory of the western man's voice
For GTX 1660 Super, the best settings for great visuals and frame rate are:
Overall quality = High
FSR3 frame generation ON
Make sure to turn dynamic resolution scaling OFF or it's not going to run smoothly at all...
Been trying to use fsr3 + frame generation with my 1660ti, but the game crashes when I activate them. If I disable fsr3 and use only frame generation, the game crashes after a few minutes of gameplay.
High texture quality hits over 6348mb vram on my RX 5500 XT so I recommend you to use Medium. V.High hits over 7250mb.
why i get crash when i turn on frame generation
I get 90 fps constant by using nexus mod file on high graphics😅
my temps are above 80 when im playing the game with everything low
For rtx 30 series owners ability to use dlss and fsr 3 FG is amazing!
it looks like i play on high with dlss and fsr capped at 125 fps in 1440p in widescreen on 3060ti, works great
@@kahtyman7293I got a 3060ti too and bro I'm so impressed at the performance in this game, so immersive and beautiful
@benjamindo8142 huh? even a 4090 can't get 110 fps at 4k on this game
@@damboi8528 yea i have a dual 4090 setup with 120 GB of Ram and a 64 core cpu and its still having trouble i just think the game is just bugged and no i did not pirate the game i mean i can play cyberpunk 2077 in 8k no problem never drops below 144 fps
nice! went from average 40 to buttery smooth 130-144. It set everything to max settings by default for some reason and I didn't wanna go through figuring out which ones mattered
This guy's always early to whatever game I'm playing and saves me time.
*Useful Information*
So if anyone is struggling to select a perfect Anti aliasing for them or wanna use upscaling but don't like the blur and all, here's the solution:
While testing on my own about graphics and performance I really wanted to shift to dlss cause smaat2x and taa are too shimery and after a little gagging and stuff I found the thing that can solve it --> Nvidia Image Sharpening and Radeon Image Sharpener.
I was not performance hungry really wanted to use dlaa but didn't like the blur but this was a game changer
Using sharpening of *0.20 - 0.30* with ignore film grane on zero on my rtx 3080 changed it all, the game looked more crisp and the blur was tackled. I tried and used dlss and boom the game looked like native but more smooth.
So try using this range of Sharpening specified
For only (DLAA, FSR3 or TAA) use Sharpening 0.20 - 025
For Upscaling use 0.25 - 0.30
The range may vary for different resolutions (I use 1080p) but keep in between 0.20 - 0.30 and use ignore film grain to 0 anything more is oversharpened
game is super well optimized, nixxes did it again, i have rx 6800 non xt , and running this game on maxed settings with fsr 3.0 on dynamic, game runs even above 1440p upscaling closer from 2000p i think and still hit very stable 60fps, what a joy to have well optimized game these days. and its not super heavy on my old r5 3600 cpu too like it was on horizon forbiden west :) 16gb vram also great stuff, in few zones ive seen above 13gb vram usage so i feel so safe
no frame generation?
When I do that I get crazy screen tear with a better cpu
@@sebthegoat301 use vsync, either from andrenaline or nvidia panel or native game vsync it removes tearing, also make sure you set your native monitor refresh rate on dynamic upscaling, if its 60hz set it to max 60, it also helps a lot, i have no tearing cause of these
Damn this man is both good looking and has a great voice.
Getting over 100fps at 1080p with a GTX 1080, Mix of very high/high settings. I love frame generation! Game looks so damn good.
Appreciate the face cam. Feels better to not just hear a voice. (Although your voice is goated)
Fsr frame generation DOES NOT NEED fsr upscale method
It is the first game that lets u upscale via dlss and also use fsr3 Frame generation
Much better without upscale, way more sharp, detailed and runs 115-120 fps BUT it feels delayed, dont like it
What a voice, bro! Could you give an advise so I can practice a better voice for me too! XD
Thank you! I’m always quite skeptical of recommended specs. A lot of games I play on higher fps/resolution on less intensive specs than what it is stated.
Despite getting 70-80 fps (on a 144hz screen) the game feels choppy and there is a lack of smoothness that is present in other games like God of War 2018, Marvels Spiderman etc ??
Is there any fix ??
I am running this game on an Asus Rtx 4060 8GB GPU Laptop with i7 12700H.
I love Ghost but this game is just too erratic in frames. I’ll be getting 100-115 fps on custom with the only thing being on very high is terrain detail everything else is high, and I have frame generation on. And just out of nowhere the frames will drop by like 50 and stay there it’s so weird. I’m in a 4060ti(8gig) with 32gigs of DDR5 Ram.
I have the same problem with a rx7900gre ok everything on very high settings, I have native fsr but I’m using fg I get 13-150 but in some specific points of the map I have terrible fps drops, only in this game
I cant apply DSR to 4K on my 2K screen, it only works is exclusive full screen, anyway to make DSR 4K with full screen and not exclusive full screen?
What is Best For 3050Ti ?????🧐
My pc has an rtx 3060 which isn’t able to use frame generation.
Weird though because it gives me the option and when I select it I get consistent 90 fps with everything on very high.
it works in every device bruh
@@preyaskhuntia2190 This is the only game I’ve gotten the option for frame generation. Just by googling it, it says it’s limited to 40 series rtx.
i have a rtx2070 my fps increased by around 30% with amd fsr 3.0 and future frame genration but somehow the game feels more laggier than wo those settings why?
I get 90 fps constant by using nexus mod file on high graphics😅
What do you use to track your FPS in the background and show your computers info?
I'm FAIRLY certain this is Nvidia FrameView? I just use RTSS never tried frameview yet
i have micro stutters after 2-3hours of gameplay
Bro i wouldn’t expect your face like that you are handsome and cute. Great video by the way.
I’m pretty sure I have the same pc specs as you but my cpu is heating to around 81 and will eventually crash. Any advice on how to fix the cpu temp for this game? I’m about 39 hours in and only crashed twice.
undervolt
Why is it impossible to find a video that showcases the FOV settings?
To use AMD FSR optimization options do we need to install additional software?
No
@@Lloyd-Franklin No I mean do I have to download any driver or something. Because turning on the frame generation didn't give any considerable increase in the fps rate.
Yeah so I have an rtx 2060 but dlss option isn't there
Is there something wrong with my game or only 40 series cards have dlss in this game
update your drivers, it might help
TY man for the guide cause digital foundry and benchmarking taking too long for the video
Doesn't frame generation add latency/input lag?
Yeah a bit but its a singleplayer game anyways so it doesn't matter as much
@@supayam14 There is a parry system that requires timing so I wouldn't say that.
@@erkuza9220 ehh skill issue
@@supayam14 more like an IQ issue if you believe latency effecting your timing has anything to do with your skills.
@@erkuza9220 Actually it does. Just adapt and change the timing lmao. I've been doing it just just fine. If it affects yo so much then just dont turn on the settings lmao
Thanks man we have pretty similar frame rates I’m on rtx 3070. Turning on frame generation makes cut scenes flicker.
Playing on a 5600,rx 6600xt fsr&upscaling(on) my gpu temp rises to 80 where eventually the game crash,on the same spec(youtube),I didnt notice any gpu temp rise,what could be the main prob here?also my game is dl from freesite
Even though I have a 16:9 monitor I play at 4k but with 21:9 even with the black bars it suits this game/fov and about 10fps more performance.
Anyone else having problems in the shadows? For me, they are blurred and only become in high resolution when I get close.
Downloading the game now. By the way, what's the name of the app that you use to show the fps? Tia!
Nvidia GeForce experience
MSI afterburner
With dlss and frame generation I get 170-185 fps with shadows on high and everything else on maxed out. I got a 3080 and 10500
anyone elses audio just spikes up when you hit an enemy for the last time? its going from a normal level to its double its so annoying
I can't turn on FG, every time I apply this setting the game crashes, my card is 3050, please help me
sorry but your computer is probably wanting an upgrade
best setting for gtx 1650 4gb？
yes
you should just get a new computer
Thank you it really helped me optimize my game! Only this setting Frame Generation when i turn it on computer crashes dont know why?
when i turn on amd fsr, game after 10 minutes crashes, my fps is also 110
Is it possible to turn Fsr3 FG on and then lock the fps to 60? Cause whenever i do it in other games (such as robocop) the game feels like 40-50 frames
use rivatuner it will lock it to 60fps i use it
@@Luca-rc4bn thanks so much for recommending riva , it did the job but when i locked it to 60 , again it felt like 50-ish . But i locked it to 75 and now feels alright. Thanks a lot, much appreciated 🍻
@@jackieestecado6209I get 90 fps constant by using nexus mod file on high graphics😅
@@riseup2060 but the game already has an FSR3 FG built in. You mean the mode has some framelimiter?
@@jackieestecado6209 the mod just lock the fps..... For me 90 92 fps constant on DLS upscaling + FG and Nvidia reflex on+boost
great optimization in the game! i run 7900x and 7900 xtx and i get 165 locked with v sync and fsr 3.0
Why does it always crash when I turn on the frame generator?
Where did you get the game
@@KiryuuKazama From the only(thanks Sony) available place.
I don't have this game, I never heard of this game, I don't plan on playing it but I stayed and watched the whole video only for this handsome man and his voice.
You guys are so weird. If you haven't yet, just tell your dad you are gey then move on.
Bruh.. how have you not heard of GoT? It's amazing.
when I turn on my frame generation, my game crashes. What is the solution?
same
i cant seem to run the game with frame gen even with my high specs im getting stutters (7800x3d & 7900xtx) without the stutters i do get 100+ fps but i get those stutters every 20 seconds
its not working right currently def do not use it right now
Thank you!
lol i did a comment for some people and wow i was playing the game and didn't realize i had my computer set to only use 1 processor and i limited my ram for when i was playing arma i feel like such an idiot i was checking my device manager and only one thread was running out of the 128 i have lol god sometimes its best to remember when your drinking to check your settings before playing games because i like to set mine to low setting if im watching a movie or anime just so my computer doesn't overheat but i still got my extra fan to stop that but because my room tends to get down to about 20 to 30 degress at night and around 50 during the day it still stays pretty cold and if your seeing my ip i do not live in los angeles just so you know
Fsr 3 frame generation causes the game not to launch for me. But I’m on an older system. I7-6700, 1070 and 16gb ram. Plus installed on HDD. But so far on high settings I’m getting 45-60 fps. Only played opening scene so far tho
In this day and age you really need to get an SSD
in my case turning on frame generation crashes the game
@@akashpaul7739 if I turn it on in game after launching it actually works great. Except some cutscenes have weird scanline type things occasionally but other than that I go from 40ish fps to 60-80
@@noot8076 I have one but only 120gb and most of that is taken up by windows software and other launchers/programs etc. I have been wanting to get a new 1tb one at least. Just in a tough spot financially for a few more months
@@Swanny098 i experience that scaling thing in cutscenes when fsr3 upscaling is on but its not an issue...the main issue is frame generation....it crashes the game during cutscenes and while opening the menu....i hope they fix it because the fps boost from frame generation is really helpful
i run highest settiings on a rtx 4060 ti with 1080p monitor, game looks look with 140+ FPS
holy shit never seen this dude face before lmao
i have ryzen 5 3500u (vega 8) and 16gb ram.... can i play this game in lowest setting ?
no
Frame generation is also available for dlss
Thank you!
I had all settings set to Ultra and was having trouble consistently maintaining 60-70fps.
With your configuration now the game works above 165fps for me! (1440p with DLSS Quality and FG, but without any of that the game still runs at 100fps) It's incredible how a good configuration greatly increases game performance
what card you have? NVIDIA? :)
Anyone have a fix for the slow camera movement on controller? Or like atleast turning of the camera rotation acceleration so its at a set speed
there's no setting for it currently but I remember this being a setting you could turn off in wo long: fallen dynasty, something like camera delay or offset right? Where you turn the camera but it's not instant and it feels slow.
It's insane that you can use both DLSS and AMD Framegeneration in this game. Been playing Cyberpunk: Phantom Liberty with frame gen. mod that way, and I prefer to play like that on my 1440p 240hz monitor 🤌
So this would just skip the frame gen mod yeah?
I did the same for cyberpunk as well
@@Tushii yeah I already tested it and even used DLAA instead of DLSS getting over 100fps without noticable input lag
Does it not have added latency then? I tried it before on Avatar and absolutely hated it. Felt like 30fps even though I was on like 100
@@Brandywine92 you need to use Nvidia reflex and it's better if you have 60+ fps without frame generation on
@@Heartbraker69228 if I'm using fsr FG on a 3080, should I be using hardware accelerated scheduling?
I accidentally checked the little box in the launcher now my game crashes how to get it back to where I have the launcher
Uncheck the box... in the launcher options.
what sounds good in his voice please???
Can u use frame gen without upscaling?
Yes!
On certain cards. For Rtx 3 and under, can't use FSR frame gen without DLSS.
When using dlss + FSR Frame generation the game crashes. Therefore I can not use with dlss but with amd fsr.
RTX 3060 12GB GAMING X LHR
Ryzen 5 3600
am i late? when did the face reveal happened?!!!
My 1060ti is struggling 😭
Yeah, my Nvidia GTX 1050ti too 😁
really? i got a gtx1650 and it's running on relatively high settings fine
@@Inorepotatoes Yeah, because your graphics card is superior to myne 😂
But then, I'm glad that I own a PS4 slim 😏
@@gtsonev1988 not talking to you bro..
My game looks over sharpened after these settings
0:02 Ns here's me thinking he was ginger
wow..ur voice is computerice godlike
Is this playable with 13th Gen I5, RTX 3060 8GB, 32GB Ram?
are u serious
No, low setting only, and maybe you get 15 fps
I can’t tell if this is a joke or not 💀
3050ti 8gb ram?
Appreciate your video, and yes his voice is amazing
i have a 4070 and dont see a dlss frame gen
It won’t let me apply the frame generation I have a 4060
Best not to. That or Reflex causes random crashes.
This game makes my gpu run HOT 6900 XT
frame generation makes game crash
Im officially getting 700 milliseconds of render latency 😂 it only happens whenever I enter a village
I click new game and it doesnt let me play i dont know what to do
turn off fsr generation
oh my god bro is beautiful.
can i still use AMD FSR 3.0 even though i have a nvidia card?
idk everytime i try to turn it on my game crashes so nah prolly not
@@lokedd that's...not related to nvidia lmao fsr 3 works on everything. it's a bug with the game right now which they'll hopefully fix soon.
fsr 3 is usually the best option for any gpu since dlss only works on premium nvidia cards.
@@lokedd same here, you have to leave FG off until you get to the main menu, then go into settings on turn it back on. if i dont do that my game crashes on startup.
@@Bags1809You do that and it crashes during the game.
Needs DLSS on as upscalet for it to work with Nvidia cards
FSR 3 is huuuge for budget systems. can play now on max settings with absolutely no lag.
I cant launch the game now
He has a head 😮
I cant lock 60 fps why?
use rivatuner
Or nvidia control panel to put a fps cap if u have nvidia card.
U Look good and nice video
thanks you
Dude you're getting so many things wrong. Do the research before excretng anythiing.
هاي الجز الأول وين الجزء الثاني
the glazing in the comments is crazy
sounds like your brother is @panjno
worst optimization guide
You’re probably trying to run the game on a laptop 😂😂
Dude has a Nvidia card and decided to use FSR smh
He has a 30 series card. They only work on the 40 series
@@erkuza9220 yes but u can do dlss upscaling with fsr frame generation at the same time, dlss upscaling works on any rtx card
whenever i go above 1080p resolution on my RX6600 the game starts flickering so bad that it becomes unusable :( I dont know what to do
I get 90 fps constant by using nexus mod file on high graphics😅
I have by AMD Driver Timeout every 14min and this 0x887A0006: DXGI_ERROR_DEVICE_HUNG. help