Test & Fix Your Briggs Starter!
ฝัง
- เผยแพร่เมื่อ 11 ต.ค. 2015
- In "Taryl & Jr Go Deere Hunting", another display of hilariousness mixed with education, Taryl and Taryl Jr are on a hunting trip tracking a Deere before Taryl properly shows you how to disassemble and re-assemble a Briggs & Stratton starter. He also goes over useful tips on what to look for with your starter bendix. Be sure to check out the Dactal Family Hunting Trip photo album at the end of the video as well. And there's your dinner!!
Special Thanks to Rudy and Cody Rowland for use of their land/supplies and Ben Abbott for the inspiration for the sketch.
Please Subscribe to the channel and Thumbs Up our videos and be sure to 'Like' Us on Facebook for all the latest news and updates!
You can pick up all your TARYL APPAREL here: www.tarylfixesall.bigcartel.com
(T-Shirts, Coffee Mugs, Shop Products and More!) Shippping worldwide and daily!
LIKE us on FACEBOOK! / tarylfixesall
We're on INSTAGRAM too! @tarylfixesall
#briggsandstratton #starter #smallenginerepair #tarylfixesall #grassratsgarage #starterassembly #hunting #fishing #deerhunting #deerehunting #lawnmower #ridingmower #troubleshoot #troubleshooting #mowertroubleshooting #valves #valve #valvejob #setvalves #mowerrepair #mower #diy - แนวปฏิบัติและการใช้ชีวิต
![อาจารย์ยอด : ลุงแว่วเล่าเรื่องผี [ผี]](http://i.ytimg.com/vi/Fd2Qsy4dqpM/mqdefault.jpg)
Taryl that looked more like a Sasquatch than a Bear.....LOL
What a great place to carry your "piece". Gives new meaning to "Dirty Hairy".
This old style comedy is missing in this day and age. Very informative and entertaining. Thanks for the knowledge and the laughs my friends. Hope you have a great day!
Man vs nature and mochine and having quality time with Jr priceless! Makes me all teary n stuff
Really dig your attention to detail in everything you teach. Zero confusion understanding what your explaining👍🏻
I had a 14.5 Briggs that the magnets broke loose in the starter housing. I carefully inspected where they went, cleaned the surfaces, and epoxied them back in place. I then adjusted the valves and it worked like a charm.
Your're a Great Dad to take Junior Deere Hunting with you !!!
Thank you for this video! My starter was seized, ended up being broken magnet pieces jamming up the armature. Cleaned it up, reinstalled and starts like a champ.
Thanks for showing those pins to hold the brushes, I used coat hanger and it worked like a dream.
The intro was hilarious! 😂
Thank You Taryl !
Once again you saved my ass !! I'm not a small engine mechanic but I love messing around with them. Those damn brushes and springs gave me about 45 minutes of grief until I thought about looking to your channel for answers.
GREAT VIDEO! Thanks for your efforts love your channel watch all learn alot and chuckle alot, thanks again
😂I'm diggin the fact you stayed in character for the whole video
I rebuilt a starter for a Briggs 2 cylinder flathead. The engine had been sitting outside for a long time.
I carefully took the starter apart, the top bushing was froze. Took apart, cleaned put back together and it worked great. Patience, and being careful is the key.
This is a great video, with very useful information. It would have been a big help if I seen this first.
OMG dude! That intro is hilarious 🤣. So glad I found this channel.
You guys are knucklehead s butt I love watching! Good bunch of eggs. Easy on the deeeere!
It don't get no better than that. Thanks Taryl .
Don’t get no better than this. High quality entertainment and expert repair advice.
These videos are funny as hell ...... great job on the skits and the how to vids.
Looks like some mighty fine eatin' in store for the Dactyl family this fall! Lol. Thanks for another great video.
You're welcome Mr. Goosepit, sir.
Appreciate your starter repair videos!! ---- ---- !! I had to drill bottom plate to insert nails as homemade retainers in order to reassemble. The outcome is picture worthy. Thought I would share, too!
Love the vest and all technical Tips!
Thanks Taryl, you did a great jobs explaining and there was really good video to help.
Another great job . Great videos guys,funny.you know your stuff! Thanks
Great work, pure genius!
I always use a couple small zip ties to hold the brushes back then I pull them out after its put together.
Thanks for this video, especially your measurements for the spring retainers. I had a snafu with a Briggs and Stratton starter, and this helped a lot with fixing it!
Would have been funny to see the hood of the Deere hanging on wall behind him lol😄😁
Another excellent installment Taryl.
Thanks!!
Hey I watched this a bunch of times and it always gives me a good laugh. Dirty Harry. Excellent video tutorial
Funny stuff and a great tutorial. Thanks guys!
I always learn a lot from you guys And I always laugh a lot because of you guys thank you so much
Just watched this video for the very first time and I am thankful and very appreciative for the educational video from beginning of starter repair, break down, parts description, special tools/technique, and reassembly. My magnets in the main housing are all broken in pieces. So I guess I am going to try and find a replacement new or used. My starter wouldn't spin at all. Again thank you for the video from beginning to end
Thanks. I needed some entertainment from this mower not starting. Good teaching video.
Another great video from beginning to end!
You’ve helped me out on a lot of my repairs
Venison steaks for the winter. Your vids rock and I learn a lot. Thank you.
Wish I would have seen this video before I rebuilt that started last week. Great video.
ATTENTION GRASS RATS! It was brought to my attention by (+suchfunstuff) That Rotary has a brush & bushing kit for the Briggs opposed twin starter. Here's the Rotary part # 9354 The OEM Briggs kit DOES NOT COME WITH BUSHINGS. Brushes & springs only.
+Taryl Fixes All LLC
Taryl for president :)
now who is whit me ?
+Nagy Andras I'm with you, but I'm not wit you. I put my own vote, and several dead people's votes in.
Taryl Fixes All is the top cap bushing able to be changed?
Taryl Fixes All 4R6
Hi I just wanted to say you have some awesome videos I like them very much I’ve been repairing smaller jeans for a lot of years and it’s great that you’re doing this keep up the good work I enjoy it
Oh my god. I like to died laughing at the beginning. You git 'em, Taryl!
Bang bang yow,haha good stuff guys thanks for the laughs,and great info
Thanks Taryl. You are just like Clarissa. You explain it all.
Thanks Taryl, im smart now ! Thats a Nice Deere, you got there !
great hunt! good video of starter repair. what about taking starter off on an old 18.5 craftsman? you helped me with my deck repair dont let me down now. and there s your dinner.
Taryl; I was confronted a few years ago with the same problem you had (worn upper bushing) on the horizontally opposed B&S engine starter. The bushing was so worn that the armature pole pieces were rubbing on the magnets in the housing! I went to the local auto-electric place (Brian Roberts Auto Electric in Victoria BC Canada) and showed them the top housing with the worn bushing. The guy went into the back for a couple of minutes and came out with an exact replacement. Cost was $2.00. As part of the starting system overhaul I also replaced the wimpy U1 battery with an Optima "Red Top" car size battery, replaced the solenoid with a full size car solenoid, and replace all the starter circuit wiring with 4 gauge or thicker wire. When I hit "start" on this thing now you better believe it starts! The only problem now is I keep breaking the plastic starter gears... they split in half. I guess they can't handle the torque. Vince
+Vincent Sullivan You made it too better!
I was wondering if brass or copper, or maybe even if a weaker steel, shim stock might be a fix? Replacement bushing maybe fabbed on a mini-lathe might be a solution. I have to take one apart and see the design is.
Great Presentation !!
I'm late to the party but subbed and belled. Zero experience here and scooped a craftsman t1600 couldn't beat free. After finding you and hours of watching re watching I got the darn thing to actually fire... not run not yet hahahaha. Thank you for your Chanel knowledge and good laughs..
The brush keepers can be made out an old thottle linkage. And the magnets can be pieced together and glued back in the houseing. I have done it many times and it does work.
Thank you for the info. Two thumbs up.
You’ll are nuts Lololo
AllWAYS fun to watch you’ll have fun
Merry Christmas 2022
Nice, humerous, video. Learned a bunch. Wish I'd have seen this before I spent the $133 on the new B&S starter.
Great entertaining post, cheers !
That intro was a fever dream. Like I used to do some dangerous substances and that is still the strangest thing I have ever seen. loved it bud
I like your style!!
Big paperclip made a quick & easy brush tool.
After three weeks of watching these videos, my wife finally busted me. Just happened to be during the fight scene in this video. Told her I was learning how to fix our John Deere mower, but she doesn't believe me. Great videos! Helped me get a used l118 running like new.
Thanks for the info! I have an Allis Chalmers scamper that has a starter with a bad starting gear, like the teeth are ground down on the starter.
Yet again great advice. I see the bear come up with the beer.
Think I enjoy your old videos more than the newer ones but they're all good.
Another great video! Really helped. I did everything just as you described, brushes & magnets looked fine but I cleaned them anyway. Marked the case liked you said & put back together correctly BUT, when I went to test the starter liked you showed, touching the positive lead to the starter screw (starter case grounded to negative bat terminal) ...all I got was a big spark. Starter didn't spin.
HELP! What do think is causing this?
All good stuff here!
Another great video !!!!! Happy hunting !!!! Hahahahahahaha Thank you !!!
That bear was probably just trying to protect its cub...(cadet)!
From who, the scrap yard? Cub Cadets are not so great and if you got one with a Kohler engine it is likely not to last very long. They have a number of problems with them.
John Doe well, for one, apparently the humor flew over your head. Also I personally own several cub cadets made by International Harvester that were built in the mid to late 60's, they all have Kohler engines and are still going strong. So I'd say 50yrs. is pretty good, wouldn't you?
@@jhitt79 For sure IH built before MTD took over
Nice Oneida Eagle bow Taryl!!!
Thank you for sharing the videos. I love you men
Great job thanks 🇨🇦👍
Too funny...the right to "Bear" arms. Nice shooting and way to cowboy up! Just subscribed.
Your videos are great.
If you don’t have the tool to punch the ring on, I used the closed end of a 3/8s wrench and it worked great.
love the video....Jerie
Great instructions!
WELL DONE AND THANK YOU
great video good job guys
Great vid. I wish I had seen this before rebuilding the bendix on my Craftsman, but it works ok, but even with a charged battery and what I think are good connections and solenoid (new) I have to physically bounce the tractor to get it to turn the starter. Maybe new brushes? Great fashion statement with the cutoff tweed blazer! Glad the bear got Slippers.
+ug mold Might need the valves adjusted or new cam
+Taryl Fixes All LLC Maybe some new tires.
LOL
We got us a deere ! We got us a deere ! weeoow hoo
Good stuff
Alt/starter shops have a bushings that will work if rimmed out a tad
That’s what I use to rebuild them for years
I'm fixing to rebuild my starter on my B&S 23hp Intek................Taryl, I forgot you had done this video...LOL! (Still think that Bear looks more like a Sasquatch)🤣
You are hilarious. Thanks! Jim Bilbrey
You da man!
Thanks again.
The man knows what hes doing..good info,good vidio.good job,just watch for that bear, ha ha.
Nice vest
I am 6 years late. This is comedic brilliance. A pair of yankees up north doing what we do down here south. As so do our days of our lives. Looking for a guiding light. TH-cam is a looking glass. Just saying.. Searching for tomorrow.
thanks or the brush tip...had no idea how to get that back together, haha
One of my kids saw that opening skit and is now scarred for life....
Taryl....the Trailer Park Boys meet The Grass Rats...What a show that would be...
Yeah it’s the valve clearance and the mtd deck you hold the mower engage handle back while you hold the clutch down
Hi Taryl,
You make good videos!
My starter motor on my ride on mower the magnet is broken. Can be glue it?
Hey Taryl love your videos what causes a starter motor to burn like that?
Cranking to long or any thing that is causing excessive load on the starter.
Can anyone help please, I have an old 12 hp briggs tractor, I noticed there was some some smoke coming from under neath the starter for a about 10 seconds, it still starts up ok but does not turn off by key these days, does it need what Taryl shows us on this video ?
Thanks for a great informative video.
You’re crazy Taryl 😜😂😂😂
I didn't think anything could make me laugh with wretching stomach cramps at 2 am.
Very informative 🎉🎉🎉🎉
Taryl and Junior might be able to teach Ted Nugent a trick or two on tracking Dear...haha. Very informative vid !
I used Alan wrenches to hold the brushed
I wish I would seen this, I just did mine 2 weeks ago and used toothpicks for brusges
A 9mm socket fits perfectly over the circlip.
Enjoy your meal, guys, you really deserve it 👍🥩
Taryl what is that song at the end, that's in all of your vids? And what are you saying in that lyric???? I've been trying to make it out for weeks.......
There is a bushing/ brush/ spring kit that has the top bushing you need for the twin starter. It's aftermarket and cross references to the Briggs brush kit. Not sure who makes it, could be rotary if I had to guess. I ordered one recently for one of those starters.
Awesome! Do you know the part number?
+suchfunstuff Your right I found it Rotary has it with the bushings. They're the only ones that offer it with the bushings. Briggs # is brushes & springs only. Thanks for the lead on that part. There's my dinner!
LOL! STILL laughing......ha ha ha!!!!!
You are absolutely nuts you make me laugh so much