I'd suggest taking some of your left over foam and inserting inside your PVC pipe before gluing it together. If you spring a leak, those pipes will all fill with water and cause you to sink. Foam inside would keep that from happening. Great design -- I've always wanted to build something like this.
Problem is filling it with foam will greatly reduce how much weight the boat can hold. You would need to use maybe a 16 inch pipe to make up the difference in lost buoyancy. A couple dozen life vests would be cheaper.
Nice simple design! Great. I’d like to see some smaller tubes mounted underneath the two bottom sides. That would give it lift and act as rail tubes to ride on
¡¡Qué maravilla y qué despliegue de ingenio!! Se demuestra un talento impresionante al diseñar y construir algo así. Un fabuloso medio de transporte por muy poco dinero. ¡¡Felicidades!!
Nice idea and build, the only things I would do diferrently would be to run a reinforcement from the motor mount to the wood at the stern and because I'm probbly twice his size would have been to upscale the boat and used a full sheet of foam for the main area and then two lite layers of fiberglass, because it's something I'd keep for quite awhile to fish from. Oh yes, and also would install a small aluminum beach chair, the type with short legs, into the deck to keep my old butt from getting too tired. Thanks for sharing.
I too would make it wider and longer. If you added 2 T's at the fore and aft thwarts to make two more beams you wouldn't need the foam...which is just going to break up and pollute the waterway. I think you could then make the prow a bit larger and add a T to each side but pointing inward and then connect to another 90, kind of reversing what he did to make the prow and then you would definitely have plenty of buoyancy. Then, I'd fill the insides of the pipe with spray foam to make is unsinkable in case of a crash. Cool idea though.
Hello! you are the best! I have been following for years! what I would like to see is you building something to fly with! and not a simple model but a real airplane! made in your style!
I know he was struggling in the boat because one is he shouting the video by a hand another is that he is giving accelate to the motor he is great person 👏 👍 nice I will support you we all are there
Thank you for such a wonderful video. Your channel is an inspiration for me to create a channel with similar contents. I hope that you look at it and give me your comments. Keep up the good work. Stay blessed and stay safe!
@@sakutaazusagawa208 aircraft needs an Airport or a large place to take off and Land. Big drone need to take off and Land verticaly. He needs 4 big motor, a battery, a controller, à stabilizer and thats all
If the tubes are water tight, adding foam or bottles would decrease the buoyancy rather than increase it, as they would add weight. Nothing would be more buoyant than air except perhaps a lighter-than-air gas like helium or hydrogen.
@@vivangreco1710 dont forget if the pvc had a good seal on it, you could pump out air and create a vacuum. Lighter than air means air at a lower pressure than 1 atm. If you could get it to a pressure of -7 psi, you might recieve somee bouyancy, there. Evacuating the air pressure would be brilliant. So flip the pump to deflate and pump that air out. You would need a one way valve flipped in reverse to achieve that and bouyancy would be increased withiut needing to fill with air. Aside from the raft now having less weight because of the weight of air, its macro density would decrease. The voids would i increase in bouyancy. If it was a very poweful vacuum, an elephant could not sink those pipes. Dont forget to have multiple chambers , on case a seal breaks. That chamber would take on water very fast. So this set up would require decent seals and many chambers, preferred. In order to put a lighter than air gas in those pipes, you would have to evacuate some air in them, creating a vacuum. At that point, o adding of any gas would be heavier than the vacuum, itself. Sense the walls are rigid. I love the idea but helium would juat be heavier to add in there after creating a vacuum to add any other gases.
Great boat. A keel might keep the boat from going side to side so much. That wood looked soft. Old pallets have hard wood. Every screw should be dipped in sealer to keep water out. Don't use power tools and flip flops.
Pretty cool. Curious, what would the cost be on this project? Did you by chance have a ballpark figure? Like others have said, pvc used to be cheap. Not no more. Great build
@Ramon Guillo los mini motos estan prohibidas haqui hace poco le an quitado los civiles una bici a un niño por averle incorporado un motor pequeño de gasolina y multa de 2.500€ por modificar la bici a motor gasolina, pregunta a la guardia civil antes de coger un vehiculo a motor gasolina sin importar cilindrada, ahora eso es en españa no se en otros paises
Great idea sir, looks lots of fun. I think though it would be much cheaper to just buy a good used boat! The pipe work and fittings would probably be more expensive! Definitely here in the uk anyway.
@@ChannelCreativeVN omg I cant believe you commented back I love you so much I want to be like you to make things I am just 13 and I don't have any assets to make or any sort but I love you so much thank you love u brooo🙏😔💙💙💙💙💙
![บุกร้านไอศกรีม VJ วุ้นเส้น !!!! [ดูคลิปเต็มหน้าช่อง] #Short | PANG ORNHIRA](http://i.ytimg.com/vi/g549nEhKZdc/mqdefault.jpg)
I'd suggest taking some of your left over foam and inserting inside your PVC pipe before gluing it together. If you spring a leak, those pipes will all fill with water and cause you to sink. Foam inside would keep that from happening. Great design -- I've always wanted to build something like this.
Hahahahahah...
Great idea. When the boat is sinking is not the time to wish you had some extra buoyancy.
the weakness is especially with the torque on those fittings from bouncing wave impacts.
Onde qui e qui eu encontro izopor dessa grossura
Problem is filling it with foam will greatly reduce how much weight the boat can hold.
You would need to use maybe a 16 inch pipe to make up the difference in lost buoyancy.
A couple dozen life vests would be cheaper.
too coool.... and the best part is him cruising the river filming himself thinking, "yeah, i'm bad... i'm bad". very good, bro!
So glad to see you use safety sandals, many people don't but you do! ;)
Those sandals very important. Lol
Ive been to places in the world where they do welding, concreting and high level building work in bare feet and t-shirts, no welding goggles either.
@@stephanguitar9778 what?! no safety sandals??
thats how you do in se asia.
Under rated comment👌😂😂😂
Nice simple design! Great. I’d like to see some smaller tubes mounted underneath the two bottom sides. That would give it lift and act as rail tubes to ride on
¡¡Qué maravilla y qué despliegue de ingenio!! Se demuestra un talento impresionante al diseñar y construir algo así. Un fabuloso medio de transporte por muy poco dinero.
¡¡Felicidades!!
very cool, just gotta find some free pvc. I've checked on price of anywhere from 6" to 12" pvc and it would be cheaper to buy a boat. Cool video
PVC ain't cheap
Especially now with the price of oil
Good luck finding some for free I tried this 5 years ago
That was 11 months ago brother you should check now it would blow your mind
Creative channel yep yep yep you are creative indeed
Love from India,Assam😠
This is a great design as the frame not only gives rigidity, but also buoyancy as well. Awesome!
Needs a chair a rod holder a rod can of worms ,an umbrella a pretty girl.Great job!
and beer.
This is absolutely too cool! I love your ingenuity! 👍😎
Wow, absolutely smashing job! All you need now is a luggage rack and an umbrella! - Jeffeo
Very nice. Looks durable, stable and sturdy
very simple and practice😀
Nice idea and build, the only things I would do diferrently would be to run a reinforcement from the motor mount to the wood at the stern and because I'm probbly twice his size would have been to upscale the boat and used a full sheet of foam for the main area and then two lite layers of fiberglass, because it's something I'd keep for quite awhile to fish from.
Oh yes, and also would install a small aluminum beach chair, the type with short legs, into the deck to keep my old butt from getting too tired.
Thanks for sharing.
Great result. I’m going to do the same design here for river fishing 🎣 thanks for sharing
Parabéns, muito bom 👏👏👏
You deserves an award for your ingenuity....!!!!
Nice projekt ! :)
Very efficient, inexpensive and safe! I could see the wave created by the boat is minimal.
I too would make it wider and longer. If you added 2 T's at the fore and aft thwarts to make two more beams you wouldn't need the foam...which is just going to break up and pollute the waterway. I think you could then make the prow a bit larger and add a T to each side but pointing inward and then connect to another 90, kind of reversing what he did to make the prow and then you would definitely have plenty of buoyancy. Then, I'd fill the insides of the pipe with spray foam to make is unsinkable in case of a crash. Cool idea though.
Tellnted Ship building engineer keep it up,
Very beautiful. Thanks
Fantástico, muito bom.
Thank goodness he is wearing his OSHA approved steel toe safety flip flops!
Nnnnnnnnnnnnnnnn!
🤣🤣🤣🤣🤣
Nice little boat. I would want it bigger so 2 or 3 people can go on it. Thanks for posting. Great idea. Lightweight and low maintenance. Perfect boat.
I was thinking using all the foam blocks = wider, more stable, and a stronger motor mount to withstand motor vibration and torque.
Wow.... Very nice project.. I like it..😀😀😀😀
Sensacional... parabéns pela invenção... vou fazer um barco igual a esse.
I love in the ingenuity Brilliant!
Tiu are a genius for all project
Good job👍👍..but the stability could be a problem..??
That’s awesome. Now I want to make one lol
Hello!
you are the best! I have been following for years!
what I would like to see is you building something to fly with! and not a simple model but a real airplane! made in your style!
You are a good inventor
Thank you for sharing and teaching me how to make a boat using PVC pipe.
Looks awesome! Now it needs a roof and solar!
Never thought, PVC pipe is useful in that many ways 😊
th-cam.com/channels/YZq90s29Jy4jfAULKkhT3Q.html
sx th-cam.com/video/6_2FmtsOiE4/w-d-xo.html
Next step would be wind musical instruments from PVC! Imagine a Clarinet from pvc!
Wow nice is good 👍👍👍👏👏👏👏👏👏
I like creative people like you
класс! 👍 мне понравилась! главное любой сможет такую сделать . только руки нужны а не грабли 👍
I like how he is impressionless after completing a project no happiness or excitement he be like "we do this shyt everyday boi" 😂😂😂
you mean expressionless? yea he's not expressive but i bet he's content. I made a pedal boat and it didn't turn out so great
8:53
I’m dead so tru
Pretty slick! Great innovation!!
Woww good job fantastic small pipe PVC boot
Parabéns pela criatividade muito simples e prático nota 1000
Great vid, a boat that can be thrown in the bed of my truck, no trailers needed.
ඔයාගේ නිර්මාණ ගොඩක් හොඳයි
I know he was struggling in the boat because one is he shouting the video by a hand another is that he is giving accelate to the motor he is great person 👏 👍 nice I will support you we all are there
i,am,your,very,big,fan
недавно переживал что этот мужик может пострадать от короны, хорошо что можно снова как и раньше переживать из - за самоделок, развалятся или нет)))
Thank you for such a wonderful video. Your channel is an inspiration for me to create a channel with similar contents. I hope that you look at it and give me your comments. Keep up the good work. Stay blessed and stay safe!
th-cam.com/channels/YZq90s29Jy4jfAULKkhT3Q.html
Ingenious! Your boat is so lightweight, it floats like a cork! Bravo!
You made it really good with great concept
*Waiting for build the passenger solar electric car at home part-2*
Same man
Ya
Yes I will check every day
Yes
I also waiting
That is an excellent job. I have never seen PVC pipes cut with a chainsaw before, hahahahahaha.
😂😂
Nice job!
Excellent project
Упор крепления двигателя нужно было делать ещё и к "соседней" горизонтальной доске , а так однажды двигатель уплывёт отдельно от всей конструкции 😊
Would be fun to watch him build a real ultralight airplane and fly on it
U mean a human drone isn't ?
@@luccanamps6668 no, I mean an actual flying machine, that can fly and be piloted by an actual human being
@@sakutaazusagawa208 aircraft needs an Airport or a large place to take off and Land. Big drone need to take off and Land verticaly. He needs 4 big motor, a battery, a controller, à stabilizer and thats all
Peter Sripol did something like that
@@bentleyc5646 I saw that. That's infact the reason why I said something like this in the first place
Nice boat 👌👌👌
You are a nice CREATOR
Wonderful Invention! Where can you get such large PVC and that great motor?
Good idea and very simple. You are amazing👍👍❤
Yes it good
@@nf_faerroyos416 0
Di
@@nf_faerroyos416 น
Nice job from America
Amazing ,like a kayak
Is this avail on amazon yet?
Nice Job!! You need to add a lounge chair and a drink holder!! :)
Good idea
Awesome 👍😎 just got to put a plastic sheet wrap it will be the best
Why am I glad that 775 motor isn’t in the title
Hahaha
yes a im from indonesia
sx th-cam.com/video/6_2FmtsOiE4/w-d-xo.html
Better know how to swim on that little boat
Cool boat.... I f I build one, I think I’ll pack the pvc tubes with plastic bottles and insulation spray foam to add extra bouyancy
If the tubes are water tight, adding foam or bottles would decrease the buoyancy rather than increase it, as they would add weight. Nothing would be more buoyant than air except perhaps a lighter-than-air gas like helium or hydrogen.
@@vivangreco1710 dont forget if the pvc had a good seal on it, you could pump out air and create a vacuum. Lighter than air means air at a lower pressure than 1 atm. If you could get it to a pressure of -7 psi, you might recieve somee bouyancy, there. Evacuating the air pressure would be brilliant. So flip the pump to deflate and pump that air out. You would need a one way valve flipped in reverse to achieve that and bouyancy would be increased withiut needing to fill with air. Aside from the raft now having less weight because of the weight of air, its macro density would decrease. The voids would i increase in bouyancy. If it was a very poweful vacuum, an elephant could not sink those pipes. Dont forget to have multiple chambers , on case a seal breaks. That chamber would take on water very fast. So this set up would require decent seals and many chambers, preferred. In order to put a lighter than air gas in those pipes, you would have to evacuate some air in them, creating a vacuum. At that point, o adding of any gas would be heavier than the vacuum, itself. Sense the walls are rigid. I love the idea but helium would juat be heavier to add in there after creating a vacuum to add any other gases.
いいアイデアもらったわ‼️ゴムボート代用可。コストダウン簡易テント🎪、ハウスボートになりそう🎵
Ide yang sangat bagus..MANTAP 👍👍
Great boat. A keel might keep the boat from going side to side so much. That wood looked soft. Old pallets have hard wood. Every screw should be dipped in sealer to keep water out. Don't use power tools and flip flops.
Also seal the wood so it doesn't rot
Hey man, I like your stuff I would like to get the plans for the car you build a few months ago... Thanks🙂
The weed eater motor for a boat motor is a genius idea
Buenicimo. Me gusto ese practico modelito. Pará la Pesca... Me voy a construir uno de esos.... Gracias por compartir la Geñal Idea... 👍👍👍👍
Поехал в соседнюю деревню на дискотеку, со своей фонотекой
Im seeing the beginning of a long tail boat with the 2 stroke engine....
I’m very impressed, this is creative genius !
Wish to see a manual bicycle riding on water with proper n detailed DIY
Can you do more step by step instructions on how to do your builds so we can follow along?
Waiting for solar car part 2
So good beautiful 👍😂
Very nice!but need to put handle or grip.for safety.😍😁
Hi I'm from South African just want to know what happened to the Solar car. Because the car looks so cool and love the shape
Dude its only been a week, this is one guy
do you know Lesotho I am from there
You should attach two pontoons under the boat. With 45 degree angles. Would give you more bouyancy and less resistance. Might hydroplane.
😊
Absolutely incredible. Smart smart man.
Very good idea...thanks so much for inspiration of me
Pretty cool. Curious, what would the cost be on this project? Did you by chance have a ballpark figure? Like others have said, pvc used to be cheap. Not no more. Great build
12" x 20 ft Schedule 40 PVC isn't that expensive. I posted a link to it but they took down the link. I haven't found the giant styrofoam blocks yet
That was pretty damn cool I’ll give him that
anjriiiitttt kerennn bangetttt.. buat mancinggg.. sueeee. cuman pake pralonnn toppp 👍👍👍👍👍👍
Hadir mantau selalu
muy buen invento, lastima de que aqui en España todo lo que se mueva a de ser con permisos y seguros quieren sacar tajada de todo
Que difícil, créeme que lo siento amigo ojalá las cosas cambien en tu país
@Ramon Guillo los mini motos estan prohibidas haqui hace poco le an quitado los civiles una bici a un niño por averle incorporado un motor pequeño de gasolina y multa de 2.500€ por modificar la bici a motor gasolina, pregunta a la guardia civil antes de coger un vehiculo a motor gasolina sin importar cilindrada, ahora eso es en españa no se en otros paises
@CNC Basic Portugal IGUAL.
My Desculpa lo mesmo.
Great idea sir, looks lots of fun.
I think though it would be much cheaper to just buy a good used boat! The pipe work and fittings would probably be more expensive! Definitely here in the uk anyway.
Ficou bom de mais, muito mais seguro que uma voadeira de alumínio porque tem essa placa de isopor não afunda.
Nota mil
E os canos estão vedados e cheios de ar, só afundam se tiverem danos
Bravo je suis admiratif.
Awesome build, looks easy to build. How long did it take you to build?
👍👍💯✌️
Almost two month hard work.Ahaha how unusefull are you?Why you ask moron,two or three hours its enough.😂😂
12 minutes 😎
Who else is waiting for the car passenger solar part 2
Me
Hi my friend, I'm so sorry for the delay, but I've been on a 1-month tour, and I've been going for a week now, I'll make Part2, when go home
@@ChannelCreativeVN *❤ok❤*
@@ChannelCreativeVN omg I cant believe you commented back
I love you so much I want to be like you to make things I am just 13 and I don't have any assets to make or any sort but I love you so much thank you love u brooo🙏😔💙💙💙💙💙
@@ChannelCreativeVN I understood 💙😔🙏
I love u so much
Not bad put a seat and a couple of coolers with air pumps on it and it would make a good single person fishing boat.
Kren bro bisa untuk mancing
ME: Ring these PVC pipes for me sir and the glue and saw.
Clerk: That will be 1800 dls sir.
ME: I think I left my wallet in my car.....
Я понял почему у него всё получается, всё нужно делать босиком ))