Soy Diseñador Industrial , y e quedado maravillado de su imaginacion , usted en un pais desarrollado y con acceso a estudios hubiera sido muy famoso por sus diseños e imaginacion para crear cosas ; Es increible que con solo una pequeña tijera , una brocha y un martillo usted haya podido crear este bote , cuando una persona se propone hacer algo si le pone corazon e interes no hay nada en este mundo que lo pueda frenar , ( FELICIDADES. )
I'm impressed with your thinking outside the box with how you formed the tubes I have used plastic pipe. I've done quick and dirty molds for projects both on the job and personal projects. I think the skin is a bit light but again I use to build fiberglass boats and parts for a living.
I was going to say something similar regarding the skin and joins to be a bit light. For the join for the Hull base with the ducky tube , I would of used and entire sheet across the width instead of small strips, as with any home fibreglassing job, de-lamination will occur over time and stronger joins will help reduce that.
Selamat pagi saudaraku. Menyenangkan sekali melihat video yang bagus dan menarik. Perahu fiber yang keren. Kerja bagus, saya suka video Anda. Saya berharap di masa sulit ini, kita memiliki semangat yang sama dalam meraih sukses bersama. Semoga sukses untuk Anda dan semua yang terbaik dan saya menunggu kunjungan Anda berikutnya.
какой конструктив изящный, сетка, ай да молодца Серёжа! Все ребятам в пример! Глаз не оторвать! Спасибо тебе наш далекий юго-восточно-азиатский друг)) Все-таки рыба в рационе большое дело!
Powinieneś używać wałka malarskiego odpornego na żywicę poliestrową i epoksydową zamiast pędzla. Będzie szybciej i wygodniej. Do żywicy używaj pojemnika z obciętego pojemnika po oleju samochodowym. Używaj rękawiczek gumowych , nie będziesz miał oklejonych dłoni. Zawsze to bezpieczniej. Wiem co mówię. Też działam w tej branży.
Nice design.... But you can improve it's boyouncy and prevent from sinking. If that thing gets punctured, the boat might sink because it's one big air... or water... container. You can section the chicken wire mesh hull's interior with several closed/sealed empty 8-to-10 liter plastic water bottles. You put those empty water bottles inside the chicken wire mesh, and then you seal it with fiberglass. In case it gets punctured, the boat will stay afloat since the other airtight bottles won't take in water. But if the fiberglass resin will affect or melt the plastic bottles, then the plastic bottles should be wrapped in several layers of paper before encasing them with the chicken wire mesh and fiberglass.
If it gets punctured, it'll sink. You need to put several empty 8-to-10 liter plastic water bottles inside the U-shaped hull. Wrap the bottles with several layers of paper before putting it in the chicken wire mesh... Fiberglass resin might affect or melt the plastic bottles so wrapping them up in paper would prevent the melting. In case it gets punctured, the other airtight bottles will keep the boat afloat.
Vive les bulles d'air 😅😅 il faut debuller quand ont applique la résine sur le matt ( avec un vrai debulleur), sinon sa provoque des bulles et risque de casse donc risque d'infiltration d'eau 😅😅 sinon bonne idée pour la matrice 👌
@@владвло-ъ4р Весь каркас, включая дно, можно было делать из сетки.И даже киль можно сварганить. И да, бутылок-пятилитровок накидать в баллон ни сил ни денег много не заняло бы. Сама идея бомбическая, а остальное дело техники.
@@владвло-ъ4р плавучесть и так норм если сильно не грузить, а транец приклеивается стекломатом и смолой , только дно тонковато минимум слоев пять стеклоткани давать нужно.
I wonder why not just leave the plywood glued to the fiber glass to make the hull even more rigid and stronger instead using it only to make a rough mold?
Very cool boat. What was the release goop on the ply floor? And the paper used on the chx wire? Thus would be a great way to fix old inflatables with dead hypalan . Cheers
Sir , I m making spoiler for my car first time with fiberglass . But I didn't no how many layers should be added to make spoiler stronger. Can you please tell me. ❤
Dear BKS Creative...... question for you sir? do you feel this is a high strength way to use fiberglass & I ask b/c I don't know much about glass. I've fixed a few small cracks many years ago but I've been looking at building a Styrofoam boat w/ glass over it & now I see you using a wire product & that has me asking more questions? Also, could you use foam & wire in the same build? Dumb questions I'm sure but I was here & you seem to know so I'm asking you? Thanks for the videos, peace
Your work is sensational, I really liked this idea, when I make mine I will place pieces of Styrofoam inside the screen to give it more buoyancy and increase the feeling of security.
Üstad sana 1 sorum daha olacak rahatsız edip duruyorum kusura bakma polyesterin yoğunlu kaç olmalı viskozitesi yani 60-100-190 var hangisi uygundur cam elyafa ?
@@dmitryzhvirblia8053 не меняет сути вопроса. Нельзя на болгарку ставить то что может заклинить. А пила очень даже может быть деревом зажата. Палки конечно не страшно а вот че потолще...
Ok but how is it inflatable?? That's a rigged hull, not an inflatable. It will work for awhile but there's not enough support from just the chicken wire to stop the fiberglass from cracking
Soy Diseñador Industrial , y e quedado maravillado de su imaginacion , usted en un pais desarrollado y con acceso a estudios hubiera sido muy famoso por sus diseños e imaginacion para crear cosas ; Es increible que con solo una pequeña tijera , una brocha y un martillo usted haya podido crear este bote , cuando una persona se propone hacer algo si le pone corazon e interes no hay nada en este mundo que lo pueda frenar , ( FELICIDADES. )
I'm impressed with your thinking outside the box with how you formed the tubes I have used plastic pipe. I've done quick and dirty molds for projects both on the job and personal projects. I think the skin is a bit light but again I use to build fiberglass boats and parts for a living.
I was going to say something similar regarding the skin and joins to be a bit light. For the join for the Hull base with the ducky tube , I would of used and entire sheet across the width instead of small strips, as with any home fibreglassing job, de-lamination will occur over time and stronger joins will help reduce that.
Selamat pagi saudaraku. Menyenangkan sekali melihat video yang bagus dan menarik. Perahu fiber yang keren. Kerja bagus, saya suka video Anda. Saya berharap di masa sulit ini, kita memiliki semangat yang sama dalam meraih sukses bersama. Semoga sukses untuk Anda dan semua yang terbaik dan saya menunggu kunjungan Anda berikutnya.
какой конструктив изящный, сетка, ай да молодца Серёжа! Все ребятам в пример! Глаз не оторвать! Спасибо тебе наш далекий юго-восточно-азиатский друг)) Все-таки рыба в рационе большое дело!
Спасибо, брат мой 😊😄👍
Ok po design at proseso pero dapat may in structions as you do the project na mabanggit po yung mga materiales na gianagamit po.
I've never seen anyone do so much with a pair of nose hair sissors!
I am so impressed by your methods. So resourceful and clever use of materials.
Powinieneś używać wałka malarskiego odpornego na żywicę poliestrową i epoksydową zamiast pędzla. Będzie szybciej i wygodniej. Do żywicy używaj pojemnika z obciętego pojemnika po oleju samochodowym. Używaj rękawiczek gumowych , nie będziesz miał oklejonych dłoni. Zawsze to bezpieczniej. Wiem co mówię. Też działam w tej branży.
Вот так шутя можно за месяц построить цеелый флот! 👆 Просто гениальное использование пластиковой трубы 👍👋 Подписался!
Beautiful work! Thanks for sharing this.
Pembuatan kapal dengan cetak fiberglass sangat bagus hasilnya kawan
PADLLEE POINT 2 AAND 8 STICK COVERED FFOOR 2
I am congratulating you Sir. You show me a new world of Do It Yourselves. I applaud you. Greetings from Switzerland
A few minutes in I can tell it's not going to be inflatable with a rigid body. But, still gets a like.
This is absolutely genius!
Nice design.... But you can improve it's boyouncy and prevent from sinking.
If that thing gets punctured, the boat might sink because it's one big air... or water... container.
You can section the chicken wire mesh hull's interior with several closed/sealed empty 8-to-10 liter plastic water bottles.
You put those empty water bottles inside the chicken wire mesh, and then you seal it with fiberglass.
In case it gets punctured, the boat will stay afloat since the other airtight bottles won't take in water.
But if the fiberglass resin will affect or melt the plastic bottles, then the plastic bottles should be wrapped in several layers of paper before encasing them with the chicken wire mesh and fiberglass.
I admire your way of doing things! 🙏🏻
The first fiberglass layup I ever saw was for a canoe using chicken fence as the frame. 😂
Mantapppp sendiri buat jimat belnja,,terbaik sahabtku..👍👍👍Salam kenal
Приветствую. Золотые руки. Новых идей. Всех благ.
Bravo très bon travail plein d'ingéniosité 😀
Nice job. Thinking outside the box. I'm impressed big time.
Great! Are you God?
Lightweight, strong, excellent buoyancy and stability, this is no more rubber boat that sinks on hooks and fish dorsal fins!
If it gets punctured, it'll sink.
You need to put several empty 8-to-10 liter plastic water bottles inside the U-shaped hull.
Wrap the bottles with several layers of paper before putting it in the chicken wire mesh... Fiberglass resin might affect or melt the plastic bottles so wrapping them up in paper would prevent the melting.
In case it gets punctured, the other airtight bottles will keep the boat afloat.
terimkasi senior ilmunya salam dari kepulauan aru maluku salam kreatif dan salam sehat selalu
The size of the scissors. Respect.
Misleading title. That’s 1/2” hardware cloth. However, the ingenuity is impressive.
Doesn’t seem very inflatable either.
inspirasi ini mah,, lanjutkan mas bro
Great job. But please, someone buy this guy a better pair of scissors.
It's a solid boat!
It's just great!!! tell me, what kind of glue did you use for impregnation???
Not a glue, it's Red resin😊😄👍
Awesome job so far!
very good. thanks
Keren suatu saat mau bikin yg kyak gini ditunggu part 2 nya bosku
Muito legal esse projeto, estou fazendo um barco também e seu canal jfoi a inspiração exata
this guy is a genius
Excellent work. I see you have the gift of 3 dimensional sight. Not too many can do this. Liked and subscribed.
Beautifully built.
Very good thanks🙏🙏🙏👏👏
Thats not exactly inflatable but still very clever design.
Vive les bulles d'air 😅😅 il faut debuller quand ont applique la résine sur le matt ( avec un vrai debulleur), sinon sa provoque des bulles et risque de casse donc risque d'infiltration d'eau 😅😅 sinon bonne idée pour la matrice 👌
excelente trabajo, el vídeo de la parte 2
Cara ngukur papan ttup belakangnya gmna mas
Anda tinggal menempelkan papan tersebut, gunakan pensil atau pulpen untuk menggaris tanda sesuai dengan bentuk belakang perahu tersebut😊😄👍
Very nice work
OUTSTANDING!!😁
Pas de chance au départ mais après belle remontée 😊
😂😂😂педикюрными ножницами порезал сетку😅😅😂😂
Very good work.
the simple thing in life are often the best
Did you just use butter as a releasing agent? That's actually a good idea when working with wood.
Butter or Margarine 😊😄👍
Для надежности в балоны, пластиковые бутылки можно было положить.
Зачем?
Думаю можно запенить и будет отличная плавучесть вот как транец теперь прикрепить? и дно слабое
@@владвло-ъ4р Весь каркас, включая дно, можно было делать из сетки.И даже киль можно сварганить. И да, бутылок-пятилитровок накидать в баллон ни сил ни денег много не заняло бы. Сама идея бомбическая, а остальное дело техники.
@@владвло-ъ4р исходим из недорогих материалов. Бутылки везде валяются, пена как и пистолет стоит денег.
@@владвло-ъ4р плавучесть и так норм если сильно не грузить, а транец приклеивается стекломатом и смолой , только дно тонковато минимум слоев пять стеклоткани давать нужно.
This awesome. Thank you for this video!
Конструкция дна слабая на такой лодке только дома в ванной безопасно, но сама идея фармовки не плохая.
Если добавить ещё несколько слоев стеклоткани то все будет отлично
Canal CairoSouza passou aqui novamente do Brasil
Should have put the fiberglass on the base so the joints overlapped with a big bit at the front on the second lot put on 👍👍🇬🇧🇬🇧
What a clever man
nice video so far but sure as hell doesn't look like its going to be inflatable
Sangat kreatif sekali ditggu video diatas air
Ive been looking for this video.
Tanya lagi bang, Abang beli kawat rol ukuran yg 1/4 apa 1/2 lebar berapa c/m ?
What purpose did the salad dressing have when you spread it over the wood have.
It appears to be a releasing agent so the fiberglass would come off the wood.
Saya kira abang orng thailand.. Kreatif bang
Terima kasih sobat kreatif 😊😄👍🇮🇩
@@bkscreativeWhat is that material you put on under the chopped strand fiber glass building a similar pontoon style boat
Kalo bisa pake tulang bang biar kuat pake peralon tulang nya bisa jg
I wonder why not just leave the plywood glued to the fiber glass to make the hull even more rigid and stronger instead using it only to make a rough mold?
Good job❤
На боковины сел и ушол 😅 Китай рулит 👍
very good thank you! how many Square meters of fibreglass sheet did you use?
I don't know how many square meters I use, but I know it in kilograms, I use approximately 5 kg of fibercloth 😊😄👍
@@bkscreative what is the white paper you used on the chicken wire before you put the fibercloth?
Very cool boat. What was the release goop on the ply floor? And the paper used on the chx wire? Thus would be a great way to fix old inflatables with dead hypalan . Cheers
Nice I want to make one too
using PVC tubes is a lot easier, you can get them large diameters, like 48' and more, stop ends and bends are available, think about it,
Прикольно!
Sir , I m making spoiler for my car first time with fiberglass . But I didn't no how many layers should be added to make spoiler stronger. Can you please tell me. ❤
I think 3 or 4 layer is fine 😊😄👍
Brp total biaya yg keluar bang,tnpa besi dan mesinnya.. thx
Kurang lebih 700-800k😊😄👍
Well done
Красавчик
Resin Epóxi or Resin Poliéster ?
Resin polyester 😊😄👍
Bang itu lem di kawat sama bawah boatnya pake fiber glass sama resin kah dan yang putih sebelum fiber glass itu apa bang kertas kelayang kah
Ya benar sekali, kertas Kelayang atau kertas minyak 😊😄👍
That is not chicken wire. It's called hardware cloth,
Dear BKS Creative...... question for you sir? do you feel this is a high strength way to use fiberglass & I ask b/c I don't know
much about glass. I've fixed a few small cracks many years ago but I've been looking at building a Styrofoam boat w/ glass
over it & now I see you using a wire product & that has me asking more questions? Also, could you use foam & wire in the
same build? Dumb questions I'm sure but I was here & you seem to know so I'm asking you? Thanks for the videos, peace
Well done! Thanks
Ukuran brapa bang
Resin ny hbis brp kg
Hadir bang nyimak...
well done.
Congratulações guy, good job.
Good evening my brother, I would like to see the second part of the video, how it turned out I intend to make a similar one.
Your work is sensational, I really liked this idea, when I make mine I will place pieces of Styrofoam inside the screen to give it more buoyancy and increase the feeling of security.
My name is Flávio Lima, I'm speaking from here in Brazil, state of Bahia, ok, I've become your fan, may God continue to bless you.
Good idea 😊😄😄
Batambah mantap ni
Find some wire cutters.
Thats some impressive work, well done 👍🇬🇧
Thank you sir 😊😄👍
He just copy my idea he just copy on channel
fantastico!
Üstad sana 1 sorum daha olacak rahatsız edip duruyorum kusura bakma polyesterin yoğunlu kaç olmalı viskozitesi yani 60-100-190 var hangisi uygundur cam elyafa ?
Bravo!
Apa itu kuat....
Or just only conteent😉🤔
Sudah tentu sobatku 😊😄👍
Excellent
а что болгаркой можно пилить дерево? а если закусит? Что куда отлетит? Болгарка, диск или рука? :-)
@@grimskal13 на болгарку можно поставить дисковую пилу.
@@dmitryzhvirblia8053 не меняет сути вопроса. Нельзя на болгарку ставить то что может заклинить. А пила очень даже может быть деревом зажата. Палки конечно не страшно а вот че потолще...
Pak..berapa kg resin & serat carbon yg di butuhkan utk pembuatan 1 unit perahu itu.?
Dalam video ini saya menggunakan 15kg resin Dan 10kg serat fiber 😊😄👍
Super
How do you inflate/deflate it?
Funny question!!!
Is it all right to work with fiber-glass by naked hands?
It doesn't matter with naked hands, as long as they don't touch the resin liquid 😊😄👍
Ok but how is it inflatable?? That's a rigged hull, not an inflatable. It will work for awhile but there's not enough support from just the chicken wire to stop the fiberglass from cracking
Put empty airtight plastic water bottles inside the hull. About several 8-to-10 liter bottles.
Tanya bang, diameter gulungan kawat ayam tsb sebelum di resin berapa inchi atau c/m bang ? Mohon informasinya. Terima kasih.
Di video ini diameter nya 10 inchi😊😄👍
Syang ya???ukuran detailx kurang di prjelaskan🙏
Did you put margarine on the boat 😳
Yes😄
What material was the white stuff that you wrapped the tubes with?
Newspaper 😊😄👍
Is that a Barbie tape measure?