Mr. Ho, you are an unbelievably skilled thinker and fabricator. To know as many fabrication disciplines as you do is a true blessing. You molded glass mat, modified the jet drive to fit, welding, etc. It seems that there is nothing that you cannot do! Awesome build of this little jet boat!
Unless you are a fabricator or work with your hands you cannot fathom to appreciate the skills this guy has and in addition the minimal amount of tools he uses in relation to this project
Xem bạn chế từ mấy năm nay rồi cái nào cũng đỉnh của chóp🥰 bạn ko chỉ giỏi về các nguyên lý của từng sản phẩm mà còn rất giỏi về cơ khí chế tạo nữa🥰 video của bạn rất đặc biệt
That's some straight up next level custom fabrication..Built better than the boats in the water today .1200cc engine .153 mm jetpump..trim..Ride plate..mikuni super 44 carbs..Love it!!!
I don't comment much on videos but I have to say something. Sir, you are one heck of an engineer. It's truly unique the ideas you come up with and how you make those ideas come to life. You use the tools and materials that you have available to make incredible masterpieces. Keep up the amazing work. I am a subscriber for life.
Absolutely incredible !!! Very simple operatives......... clever hull construction......... and a motor that provides a very quick turn of speed. Love the Mikuni 44s.
I am 66. Built many high performance cars. You Sir, are amazing. You exhibit the essence of hotrodding. Very impressive design, and build. I hope you are very successful! Outstanding!
Mr Hò you always do a awesome job of building these craft! I doubted you when you first took it out and it was obvious that the trim of the boat was off! But you sorted it out immediately!! By putting on a flow reducer to maximise the thrust efficiency!! Yet another awesome video my friend! God bless you ❤❤❤
Mr Hồ, Một công trình tuyệt vời khác của bạn. Sở trường xây dựng đơn giản của bạn luôn làm tôi ngạc nhiên. Hãy tiếp tục tạo video của bạn, tất cả chúng ta đều thích chúng.
If this is only a hobby, he is wasting his skills, he built a 13,000 dollar boat, he could sell it for 20,000 or 30,000., he is clearly a professional.
Beautiful work sir awesome very nice. My son-in-law used to have a Waverunner that had 350 horsepower that engine in yours would go like heck it would go 80 miles an hour in a Waverunner can you imagine what would go with your boat awesome nice work sir God bless good luck from USA😊
Truly incredible. The only thing i have concern about are the motor mounts only into the fiberglass. Seems like a more structural support is needed for longevity. A metal plate maybe? Also a metal plate on the transom to help take and spread some impact stress load incase you hit something with the jet.
im a fabricator designer I love this channel because he can create things on the fly without a bunch of drama it's just common sense building and it always turns out great I have learned some valuable ideas from him and I especially like the boats which is led me to designing my own catamaran boats. keep up the good work it's always fun to watch this channel
I love watching your builds but please please wear a respirator when you’re cutting fiberglass! You work with it a lot and I don’t want you to get sick from it :( Best wishes!
my new favorite build from your hands, this is one of the most amazingly well done hand built boats ive seen come out of a back yard in a very long time, like 25 years or so, favorited the video so i can go back in the future an try to build the same boat for myself just a meter longer as im 6.10 ft tall, awesome power coming from that engine an what a sound it has
Sir you are a true craftsman, watch start to finish. Simply amazing wonder what you could achieve if you had a whole fabrication/ machine shop with all the advanced tools. For your next project build a one person plane.
Nice boat Mr Ho. My first time watching your channel - and now a subscriber. Excellent job on the build , truly a man of many talents Keep safe on the water , maybe ware a life-jacket .. oh, and add a bulk head ( air tight ,) with some expanding foam incase you strike a rock or something - Well done again Mr Ho .... I'm off to watch some more of your videos... ☘️
This looks and sounds very good! Excellent work! Are you going to add tuned exhaust at some time in the future? You are leaving a lot of power on the table with straight pipes.
Luar biasa kreatif sekali kawan,, saya sangat suka dengan skill dan ketrampilan yang teman punya,,, sukses selalu kawan,,, salam kenal dari Indonesia🇮🇩🇮🇩❤❤❤
Yes, the engine is really being held back by lack of proper scavenging. That said, The design and build is great, adding another 30-40% to the top end might be a wild ride. Love Mr. Ho's work. Proof it's not the cost of the tools, but the knowledge of the guy running them that makes the difference.
Dude ive watched a few of your builds and you impress the sht out of me. Never have i seen such i dont even know the words. Like a mad scientist. Very kool. Cant wait to see whats next and awsome job on showing us the steps you take. Very kool
that little boat seems to get a pretty good speed , one thing im slightly worried about is if its going to submarine should the engine quit while going full speed , that could realy spoil the fun and sink the boad in a hurry (doesnt has floating chambers ) pack some styrofoam on the open spaces that way it stays mostly afloat when filled with water or upside down and you can at least find it back might need to glass in some stringers on the inside of the bottom as i wouldnt be supprised if the bottom flexes at speed , should make the hull last a bit longer
i'VE WATCHED SEVERAL OF YOUR VIDEOS AND THEY KEEP GETTING BETTER AND BETTER....I'm honestly surprised a company hasn't asked you to develop a new boat design....but you know what if I was you get someone to financially back you open your own company and sell a really cool looking boat or trail bike....Your designs would sell on the global market...
I would say now that you have the metal mold for the fibreglass body you can turn this into a business! Bet there are loads of people out there looking for a boat like this
Your channel is the best source of inspiration for me in making mini boats. I really like it, I'm always waiting for your new video, I hope one day I can see your creativity in Vietnam. 🤩😍
Mr. Ho, you are an unbelievably skilled thinker and fabricator. To know as many fabrication disciplines as you do is a true blessing. You molded glass mat, modified the jet drive to fit, welding, etc. It seems that there is nothing that you cannot do! Awesome build of this little jet boat!
Jf
Очень долго не было Вашего видео 😱. Ещё раз скажу, Вы гений. Очень интересно смотреть Ваши работы. Однозначно супер 👍👍👍
Well, not a genius, just a bored man with a lot of money
Unless you are a fabricator or work with your hands you cannot fathom to appreciate the skills this guy has and in addition the minimal amount of tools he uses in relation to this project
This is impressive to say the least! Sounds like a absolute beast!
I built boats for 20yrs still to this day we use fuck all tools a grinder, sandpaper, orbit sander, drill and thats about it.
@damianmurray1792 hats off to u man! That's freekin awesome! Very cool skill/ knowledge to have..
This guy is a mechanical genius.
Minimal? Drill press, lathe, arc welder, plasma cutter …
Việt Nam rất tự hào vì có một người tài giói sáng chế như bác
One of the best youtubers around, Mr Ho never ceases to amaze !!! Can't wait for the next video, more please ;-)
Xem bạn chế từ mấy năm nay rồi cái nào cũng đỉnh của chóp🥰 bạn ko chỉ giỏi về các nguyên lý của từng sản phẩm mà còn rất giỏi về cơ khí chế tạo nữa🥰 video của bạn rất đặc biệt
Rryryrrrryitryrrgfuuy
How much to buy one ???
❤😮
😮❤
That's some straight up next level custom fabrication..Built better than the boats in the water today .1200cc engine .153 mm jetpump..trim..Ride plate..mikuni super 44 carbs..Love it!!!
You should make the seating how they sit in f1 cars then produce a bunch of them and sponsors a race, it might catch the right eyes
U know ur thing
I don't comment much on videos but I have to say something. Sir, you are one heck of an engineer. It's truly unique the ideas you come up with and how you make those ideas come to life. You use the tools and materials that you have available to make incredible masterpieces. Keep up the amazing work. I am a subscriber for life.
That's all you do is comment
😊
Good! Hi
That's pretty cool Mr Ho. The smile on your face after the last run, says it all 👍😊
บารมีที่ขลบ9
Glad to see you are still at it Mr Ho! You will always be one of my hero’s. Another great job Sir!
Recently bought my self a medium mini speed boat and watching this is just fascinating, beautiful work
Mr. Ho, Bạn thật tài giỏi, ai rủng rỉnh tiền thì mua thuyền chứ ra ngoài tự đóng một chiếc mà không biết hướng dẫn thì sao? Tuyệt vời
You just became my first non-English speaking channel subscription! Great work!
Absolutely incredible !!! Very simple operatives......... clever hull construction......... and a motor that provides a very quick turn of speed. Love the Mikuni 44s.
Mr Ho, you sir are truely talented man! Thanks for sharing and bringing a smile to my day!
Amazing project and skill. You are very talented and your video build was excellent. Great job and thanks for sharing.
I am 66. Built many high performance cars. You Sir, are amazing. You exhibit the essence of hotrodding. Very impressive design, and build. I hope you are very successful! Outstanding!
Did you see how he molded the hull? Impressive.
You know your good when you make that all look so easy
All this work with a welder, handtools and a metal lathe.
Mr Hò you always do a awesome job of building these craft! I doubted you when you first took it out and it was obvious that the trim of the boat was off! But you sorted it out immediately!! By putting on a flow reducer to maximise the thrust efficiency!!
Yet another awesome video my friend!
God bless you ❤❤❤
Обалденный вариант, молодчага🤝🤝🤝 так держать себя всегда✌✌✌✌✌
Mr Hồ, Một công trình tuyệt vời khác của bạn. Sở trường xây dựng đơn giản của bạn luôn làm tôi ngạc nhiên. Hãy tiếp tục tạo video của bạn, tất cả chúng ta đều thích chúng.
How long did it take to type all those little symbols in your comment, respect
😊
@@beemerkon there are non english keyboards
@@GhulamAli-kj3tx 4
please ty❤đ
Очень интересно получилось! Классно, без лишних слов, всё по делу! Удачи и процветания вам в вашем хобби!
If this is only a hobby, he is wasting his skills, he built a 13,000 dollar boat, he could sell it for 20,000 or 30,000., he is clearly a professional.
Beautiful work sir awesome very nice. My son-in-law used to have a Waverunner that had 350 horsepower that engine in yours would go like heck it would go 80 miles an hour in a Waverunner can you imagine what would go with your boat awesome nice work sir God bless good luck from USA😊
Truly incredible. The only thing i have concern about are the motor mounts only into the fiberglass. Seems like a more structural support is needed for longevity. A metal plate maybe? Also a metal plate on the transom to help take and spread some impact stress load incase you hit something with the jet.
My thoughts are to have wood stringers for rigidity and also to bolt the motor mounts to
im a fabricator designer I love this channel because he can create things on the fly without a bunch of drama it's just common sense building and it always turns out great I have learned some valuable ideas from him and I especially like the boats which is led me to designing my own catamaran boats. keep up the good work it's always fun to watch this channel
Kinda nice when they just build and don't have to talk about losing the shop every five minutes
Sometimes to make things perfectly we take a hassle when we can make things easier.
That's what because they make things for business an justify the price with the effort,but when it's a personal project,it can be done simpler.
He's got pretty well calibrated eyeballs
saya dari indonesia sangat suka konten ini , boleh saya bertanya itu memakai mesin bekas apa ya tuan Ho 🙏
Kênh như này lẽ ra phải được vinh danh lên đài truyền hình quốc gia 🇻🇳👍
Can you imagine how much stronger it would run with proper expansion chambers?
It would be sick. Good job my man .
Or if he port matched that exhaust, Jesus Christ that was rough
@@BikingVikingHH yes and pipes it would scream, I dedicated 17yrs to the high performance 2 stroke industry and enjoyed every day of it.
U did what us regular people wish we could! Good for u brother!
I love watching your builds but please please wear a respirator when you’re cutting fiberglass! You work with it a lot and I don’t want you to get sick from it :(
Best wishes!
Came here to say the same thing!
Can I tell you how awesome your work is when I clearly have not finished the video?
That is absolutely awesome. If I had the money I would fund you to build custom mini boats like that.
My friend you are definitely blessed.
Quá tải giỏi 👍👍👍⭐️⭐️⭐️. Con làm đi xuất khẩu qua Campuchia và thái lan. Là con giàu!!!
Chúc mừng con ❤❤❤
Always impressive to see the little speed monsters you craft!
my new favorite build from your hands, this is one of the most amazingly well done hand built boats ive seen come out of a back yard in a very long time, like 25 years or so,
favorited the video so i can go back in the future an try to build the same boat for myself just a meter longer as im 6.10 ft tall, awesome power coming from that engine an what a sound it has
That’s amazing, I want to buy one, how much?
Sir you are a true craftsman, watch start to finish. Simply amazing wonder what you could achieve if you had a whole fabrication/ machine shop with all the advanced tools. For your next project build a one person plane.
Looks to be very fast , at least 70!to 75 mph !!!
So awesome this bad ass powerboat
You guys are the best builders
Kênh càng ngày càng làm giỏi !
Đồ làm vỏ ca nô đã có khuôn Composit khá chuyên nghiệp !
I don't know when I first realized that you guys totally knew what you were doing! I'm enjoying this the boat really looks great!
Chất luôn! Việt Nam vẫn có những người nông dân giỏi
Nice boat Mr Ho.
My first time watching your channel - and now a subscriber.
Excellent job on the build , truly a man of many talents
Keep safe on the water , maybe ware a life-jacket .. oh, and add a bulk head ( air tight ,) with some expanding foam incase you strike a rock or something -
Well done again Mr Ho .... I'm off to watch some more of your videos...
☘️
Anh mải là đỉnh cao vược ngoài mong đợi ❤
Em là Phan cứng của anh nhiều năm nay video nào anh ra là em coi hết 😊 chúc anh trai càng ngày càng thành công trong tương lai 🎉❤
This looks and sounds very good! Excellent work! Are you going to add tuned exhaust at some time in the future? You are leaving a lot of power on the table with straight pipes.
У меня нет слов , это просто фантастика ,у тебя золотые руки!!!
J'attends toujours avec impatience les nouvelles vidéos ! Beau travail (comme d'habitude)! Merci beaucoup ! 🤗 👏👏👏
These builds never get old
Luar biasa kreatif sekali kawan,, saya sangat suka dengan skill dan ketrampilan yang teman punya,,, sukses selalu kawan,,, salam kenal dari Indonesia🇮🇩🇮🇩❤❤❤
Hi Mr Ho! I'm new fan from Spain.
Just want to say that your work is awesome!!! 👏🏻👏🏻👏🏻
We are waiting for the next surprise
You are certainly a fabrication and mechanical genius as well as a highly skilled and knowledgeable Craftsman! Brilliant!
This guy is second to none. Brilliant in everything he does. First class work.
Just EPIC . You're a professional car , boat , bike or whatever you get your hands on . 💯❤️👍🙌
Tay nghề của bạn ở Việt Nam phí lắm, tìm cách ra nước ngoài đi có nhiều máy cũ cho bạn làm và kiếm nhiều kinh tế với tài năng này. Bạn thật sự giỏi!
Amazing build. Only comment I have is I would have laid up several more layers of fiberglass and put in some additional wood in key stress areas
Stringers
@@LifenSantaBarbara Yup
I was missing you Mr Ho! Excellent build, congratulations!
Happy to see that you have a great team too .. congratulations all 👏🏻
Its always fun watching him work with the fiberglass and finishing since its the stuff i do at work.
Nice build Ho.👍🏻
Một công việc tuyệt vời khác Mr Ho, xứng đáng là một kỹ sư, Bravo
Great job. I'd like to see expansion chambers on each cylinder for your exhaust. You'd get crazy mid and top end pull. 28:34
Yes, the engine is really being held back by lack of proper scavenging. That said, The design and build is great, adding another 30-40% to the top end might be a wild ride. Love Mr. Ho's work. Proof it's not the cost of the tools, but the knowledge of the guy running them that makes the difference.
Thiết kế đẹp, rất giống mấy chiếc cano đua tính giờ. A chịu khó làm 3 cây pô bụng nữa nó mới phê.
As always Mr. Ho another great video you are a gifted person. Keep it up and God bless.
Love it brother I always look forward to your project. Keep it 👍
Damn man, I'm impressed as hell. You have some very high level skills. What a great little boat.
That thing looks like it would be a blast. Only missing one thing. Needs a couple of fishing pole holders😅
He’s back! You make it all look so easy. Super inspiring stuff. Gotta turbocharge one of these engines!
Great boat Mr Ho
Would like to see a video of how you made your dock, or Jetty. That looks great
That jump out of the water launch is amazing!! Well done sir!!!
This guy should have aleast 1Million subscribers by now.
Awesome work 👍👍
Dude ive watched a few of your builds and you impress the sht out of me. Never have i seen such i dont even know the words. Like a mad scientist. Very kool. Cant wait to see whats next and awsome job on showing us the steps you take. Very kool
Замечательно 👍, молодцы 👏 моделисты конструкторы 👍👍👍👍👍👍👍🙏💯💯💯
Your boats are getting more and more professional looking every time! That boat is very quick!!!
Классная работа, Поздравляю, Молодец! 👍🏻😊
that little boat seems to get a pretty good speed , one thing im slightly worried about is if its going to submarine should the engine quit while going full speed , that could realy spoil the fun and sink the boad in a hurry (doesnt has floating chambers )
pack some styrofoam on the open spaces that way it stays mostly afloat when filled with water or upside down and you can at least find it back
might need to glass in some stringers on the inside of the bottom as i wouldnt be supprised if the bottom flexes at speed , should make the hull last a bit longer
i'VE WATCHED SEVERAL OF YOUR VIDEOS AND THEY KEEP GETTING BETTER AND BETTER....I'm honestly surprised a company hasn't asked you to develop a new boat design....but you know what if I was you get someone to financially back you open your own company and sell a really cool looking boat or trail bike....Your designs would sell on the global market...
Far out, round 2 made a huge difference!! Nice job guys!!
Нереально крутое видео! Светлая голова и золотые руки! 👍
Отлично ! Mr Ho, нужно осваивать технологию подводных крыльев. Это следующая ступень.
Уважаемый, Вы сами до какой ступени дошли?
Only thing I would have done differently is thicker glass mat.
Unbelievable build 👍 👌
These people have golden hands, send me one to Russia please😂, Well done guys
Đợi hoài hôm nay mới thấy sản phẩm của Mr Hồ😂💯like
Super nice, I think you could sell these as fast as you can build them Great job
That boat rips! Congrats on the build, she's marvelous!
Proud of your hard work. Please keep inventing, hope your kids learn from your hard work.
wow! As a tool maker, I am super impressed! Skills 100%
Keep it up Mr.Ho, one day you Will have your own factory..😊
Amazing I enjoy watching people build something from many different parts.
Quá giỏi đáng ngưỡng mộ bạn
The best always Mr Ho ❤❤❤
❤❤❤❤❤❤❤❤❤
@@thanzin6127.f😮bbcdd cbdbbqna
How much is that sir
Wow, very powerful for such a small boat! Nice design and construction! You are a good engineer and fabricator!
Крутой мастер!
Лодка ***БОМБА***!😊🎉🎉🎉
Man that looks fun!! Great build!!
I would say now that you have the metal mold for the fibreglass body you can turn this into a business! Bet there are loads of people out there looking for a boat like this
Excellent fabrication and design skills, Mr. Hô! That engine in the boat RIPS!
Ngưỡng mộ bạn quá
You have earned all my respect and admiration for such remarkable skill. Congratulations, you are a true artist! 🌟
🇧🇷🇧🇷🇧🇷🇧🇷
A beautful craft, awesome work as always!
Классный аппарат получился!👍🏻
Nada mejor que el propio ingeniero constructor pruebe la maquina tal como la imaginó cuando vio las piezas sin armar. Felicidades Mr Ho desde México.
Viet Nam not Mexico.
Kiero una lancha igual como la consigo?.
Anh quê KG nè, em cũng quê KG , phải chi có 1 chiếc như này chạy đi thăm ruộng thì khỏi bàn 😁
Your channel is the best source of inspiration for me in making mini boats. I really like it, I'm always waiting for your new video, I hope one day I can see your creativity in Vietnam. 🤩😍