I found I engineering great..if you still hear a tapping sound on completion,put a spanner on the back dome but and move half a turn back the sound will go.its resonating sound between the rockers and the rocket box cover..couple of ways to fix,get new grommets for the two nuts and make sure the cork gasket is not squash down.you only need a small tightning..
i adjusted my valves a little tight by doing that i eliminated the tapping noise and the engine runs better could it harm the engine if the lash is a little tight
I’m not an engine builder or import tuner, but yeah, my understanding is that if you don’t have the proper gap then essentially your valves never close fully which could blow exhaust past your valves, cake the valves and seat surfaces, and burn the valves themselves. I’d take a little rattle over those. Surely this has been debated over the internet about just how tight is tolerable. Remember to adjust them warm!
Proper adjustment does certainly help reduce noise, but if there’s no gap at all, and the valve can’t fully seat closed inside the cylinder, then pretty serious damage will result in short order! Not to mention it will hardly run at all!
I found I engineering great..if you still hear a tapping sound on completion,put a spanner on the back dome but and move half a turn back the sound will go.its resonating sound between the rockers and the rocket box cover..couple of ways to fix,get new grommets for the two nuts and make sure the cork gasket is not squash down.you only need a small tightning..
Great video, very helpful thank you sir
🙌🏻
i adjusted my valves a little tight by doing that i eliminated the tapping noise and the engine runs better could it harm the engine if the lash is a little tight
I’m not an engine builder or import tuner, but yeah, my understanding is that if you don’t have the proper gap then essentially your valves never close fully which could blow exhaust past your valves, cake the valves and seat surfaces, and burn the valves themselves. I’d take a little rattle over those.
Surely this has been debated over the internet about just how tight is tolerable. Remember to adjust them warm!
@@AdventureTEQ If the valves are not fully seating- then they are not cooling properly.
Someone know we're I can find a complete video ? Thanks
What’s the purpose of the adjustment? Just to make it less noisy and annoying? Lol
Proper adjustment does certainly help reduce noise, but if there’s no gap at all, and the valve can’t fully seat closed inside the cylinder, then pretty serious damage will result in short order! Not to mention it will hardly run at all!
cuando suena entre la cámara y las válvulas del 22r
English por favor!
@@AdventureTEQ read my english tip..to understand what the guy is saying
@@AdventureTEQdoes it not Google translate for you?