Setting the Correct Voltage- Tattoo University
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Proper way to set up your tattoo machine. How to find the correct voltage. What is the Sweet Spot. Prevent your machine from overheating. Easy way not to cause a lot of damage to your client.
website:
gotattoou.com/
Facebook:
www.facebook.c...
A few hours ago, someone told me to watch this guy's videos with the speed turned up to ×1.25. It literally makes it go in a normal tempo!
THANK YOU!
@@kelseyshaver1378 anytime 👌
😭😭
@@guaca7869 don't be sad, we here for u
best advice!
Its very rare when ppl actually make a video about so specific but extremely important at the same time in tattooing..
thank you very much ;)
Like I never knew how to put the needle in .. a lot of times I had it upside down.. :D
I recognize that sound! I had no idea my wife did tattoos!
🤣🤣🤣🤣
😂
Hahaha 😂😂😂
🤣🤣🤣😭💀
🤣🤣🤣
He really takes the time to put it in laymen terms so you can understand and yes he keeps his voice calm and even makes for a relaxing listen thanks for such a good video..
Awesome vid bro! I did an apprenticeship over 20 years and then never tattooed due to the military. This was a great refresher.
Glad to help
How many of y'all closed your eyes ? Lol
ScrewedUpPapi lol my 4 year old daughter was watching this video with me and she said” mommy he said close your eyes 👀 “ she closed her eyes then I closed mine and listened lol this video was very helpful though I must say!
I did... Wtf
“Crank up the voltage and going to town on someone “ I’m screaming
I buggered around with lower voltages until I got to the magic 8. Leaves good crisp clean lines. 7 was just too soft, 7 or lower would have been good for softer work. But 8 works pretty great.
What machine are you using where you need 8v to run loaded? My machines run smoothly at 4 to 6 volts, but I build my own so I know what to expect.
My liner also runs 5-6v@@deanstephens5940
I saved this video awhile back because i knew this would be an excellent reference for when it was go time for me. -my uncle called my number and i watched this vid before and when tuning my liner and it was clutch. Not only did i get into a good lining rhythum my auntie that i tattooed smiled and is happy so far with our first ink session. -thank you bro you helped me stay focused and keep it clean and crispy (it was a brand new machine too). 🤙🤙🤙🤙 Greeting's from the island of Guam 🇬🇺 🇺🇲 .
Best ASMR video I've ever listened to. I started drifting into dreamland
I'm going to do a tattoo asmr video now. Stay tuned for it.
I was thinking the exact same thing and felt it too!
Finally someone explained exactly what I've been wanting to know! Thank you!
This is the first video I see with someone saying to close ur eyes and listen...It helped out a lot , Thanks...
You are Welcome!
Thank you sir! I watched 5 videos today and you made more sense with the voltage thing so far. The ear thing was something I was dependent upon and you are the first person I heard reference it. Much appreciated.
I love this video to help fall asleep every night. his method is great tho, but don't be afraid to turn up the voltage, depending on your machine build it could vary, do what he shows you with the finger, if it stops its too low, you have to hear the machine sound change when entering skin, that's what your looking for, if you put your finger on the bar and there is no sound change, it's too high. good luck
he's relaxing to listen to almost like Bob Ross
Thank You!
Issac Thornburg totally the Bob Ross of Tattooing I’ve learned so much from this guy I gotta check out his IG and website. I dig the tips
Thank you for sharing your knowledge in such a patient and non-condescending way! Means a lot to us that are just getting started :)
Chicano tats
Dude, solid information, just the right amount of detail and explanation 👍🏽👍🏽to you. This is a crucial part of the process and I remember what it was like first starting out. It can be intimidating at first. So keep up the great work and continue spilling solid information
Dude your videos are so helpful. You’d be amazed how many artist I worked under don’t know anything about machines and say that. They just set up and go. When I would ask they wouldn’t know. Simple things too.
Probably the best video and information out there.
Dude sounds just like Brian Posehn and I couldn't be more excited about it.
I get that a lot
I've been tattooing (practice skin) on 3.5 because I was afraid of it being too high.
Thank you so much for this video!
Glad to help
@@TattooUniversity Subscribed!!!
“Look.Feel.Listen” Love it!
...taste.🤣
Far best video about voltage and right tune coil machine ❤
First morning laugh goes to Tyler hughes, thank you 😆🤙... Best video ive watched by far. Thank you for the detail. The Bob Ross of tattooing!
You helped me get sum good sleep bro..cranking up the voltage
Awesome video brother! Very informative for any beginners out there including myself! Thank you!
The sound thing helps me a lot. thank you.
This was more helpfully then any video I've watched
Thank you, you explained this very well. I see I was taught by someone who did not know what they were doing.
The setup volts depends the amount of wraps on your coils. There is no sweet spot. Got 4 different liners machine for different lines, one is running on 3.6 volts the setup is for a 3 round liner needle till maximum 5RL needle the bigger the needle the more power a need to get the needle in the skin. So for a 7 or 9 RL I got a different machine. And need more volt to get it run .... because I need a little bit more power I need different coil, coils with more wraps. Most important know how a coil machine works, if you know how it works, then you know how to adjust.
A machine is not going faster if your put more volts in it ... it goes harder... not faster it's a big difference.
Good looking with this I personally have an issue with setting the coil machines.. so I got accustomed to rotary. And I like your break down. With the voltage this has been the most informative video for tattoos I have watched. Thanks for the lesson
Glad to help!
@@TattooUniversity also I have another question I can't seem to find an answer to. When lining is it better have the machine hit harder or softer with the needle? and the same question for shading.
Thank you for this video. I’m a super noob to tattooing and bought a kit just to touch up my own stuff. Not for a career. I did really well first day but these are the things I need to learn. I subscribed and will watch and learn. Thank you.
Just learn as much as you can first before tattooing on yourself.
I’ve been watching quite a bit. First touch up I did came out good but I think I had the needle out a hair too far because it would get hung up in my skin. So I think less needle and a bit of angle on the gun rather than straight down will make for a better experience. Although what I did cane out good.
Someone get this man a glass of water. Awesome video tho
so thirsty
ah man you have all the answers im after thank you so much , I have been running jack hammers and this info is so damn hard to find with everyone using pens now ... your a legend
Thanks. I plan on adding more videos soon.
dude I watched a lot of your videos you helped me a lot just did my first tattoo on my leg came out incredible I applied everything I learned from you just want to say thank you for helping me along my journey. keep up the good work
Cool did that too 2 yrs ago. I've done about 12 so far = all super good
Man... When I started 20 y ago... Tattooists didn't share knowledge, I scrubbed toilets and mopped floors for a year before I was able to start setting up his station for him to work.. It was 14 months before he "let" me get my first machine.. An antique Spaulding & Rogers, and it was the same.... Fuck! I remember him yelling at me... Close your godamn eyes! Listen to your machine! It will tell you everything you need to know. - No digital then.. Just the knobs.. Good times.. Thanx for the flashback!!!
Awesome! What I find is even if someone has learned differently they will come to the same conclusions. I learned a lot about machines on my own. Then I would read a book and it would tell me some things that I was already doing. Just made me feel better knowing I was on the right path. Machine tuning is an art that you need to practice a lot because you start to know what is right by feel. The more you touch it and mess with it the quicker you learn what feels right and what is whack. You need to look, listen , and feel when the machine is working properly.
Thank you! This cured my insomnia
Glad I cold help
The front looking double armature bar while running is a good tip also.
Boi that voice has a certain sound to it... A particular type of depth... No denying it.
Hey man,great vid. I have a question,when I’m doing line work,or even shading,my lines I use about 7.5-8.5 volts,using a dragon hawk rotary machine. Now when doing line work,why is the needle sometimes,get stuck in the skin as I’m laying a line? Is it because the machine is a china-cheaper machine? Idk,but it is driving me crazy,please if u can do a video on it,that would be AWESOME !
I used to get that, too! Man, slowin' down, taking your time, chopping it up with your collector...
Yeah, try it out.
You’re probably pushing too deep. Needles tend to get caught if you’re going too deep and too fast. Try and pull back your needle a couple of mm or work on your depth control, that should help you out a lot
@@misakisadur needles out to far
Rotary is slower than coils i use to use a hummingbird rotary and i move very slow which gives me a clean line as for coils will always be faster than rotary
Also, a rotary machine doesn't always stop with the needles withdrawn when you cut the power! Depending on where in the rotation it is, the needle can be full out when you lift off, thereby getting caught. That is the main disadvantage of rotaries, and something that no-one talks about! They're ok for shading- with a bigger bundle of needles, but for single needle, or a 3 round liner, they're no good. Go coil- your lines will be finer, and more controlled.
Definitely a great teacher in the arts
This video really helps considering iv just going to start giving tattooing ago maybe pig skin first don’t want no shity job on anybody till got it down too a t awesome video
I’ll say one thing, your needle isn’t retracted when not powered which is a safety Nono, accidental sticks can happen.
This helps me so much. Thank for the video.
Really good Video. Thx and greetings from Germany
Idk how much i trust this dude. I don't see a single tatt on his arms lmao
Watch newer videos
Also just watch more videos. You don't have to trust me. The proof is in the video. I only show what's tried and true information
Thank you, you’ve helped me so much! Great video you explain it perfectly! :D
Cool I’m sure you made videos on this topic before but I’m having trouble mining with the new rotary machine with needle cartridges. Is that common or is there a way to have the needle stay in place?
Hi Just Found Ur Channel and I've gotten Some Good pointers from You ...i just Bought a Beginner tattoo kit so I can LEARN How to tattoo on Myself I got some PRACTICE Skins but Some Questions I Still have and I just HOPE You keep posting cuz Last Video I seen if yours was a Year ago and Nothing RECENTLY.... If you have a NEW CHANNEL Please Keep me posted... Thanks for your INFO cuz You Explain it WELL and EASY
This video was so easy to follow and understand! Thank you!
You don't need two bands, one and a slight bend in the needle is plenty. You are causing extra drag on the bar, so extra volts to run,
good advice
Some use extra band in case one snaps.
12T90 LSD25 a lot of people prefer coils because their softer on the skin, no to mention, coils carry to much culture to become obsolete, the tattoo industry thrives on its traditional values. Coils would never become obsolete.
12T90 LSD25 I use rotary machines, don’t use coils, never have. But I don’t have to use coils to know they won’t become obsolete. Lol
12T90 LSD25 yeah that’s better.
I could meditate and learn tattooing at the same time. However watching this I learned that my feelings as a person BEING tatted, the artists had their machines too high. I am an illustrative and creative artist and can at least tell by ear how much buzzing is in the field of irritation. I have had some bad experiences. Even now when I exercise particular line work will swell from certain artists. As well, I decided I would only entertain brown artists, being that it seems they are more understanding of our skin conditions, moisturizing and aftercare, fat distribution and etc. Can we all introduce discussions around checking in with the clients when it comes to voltage/riding the tube issues??
And with respects. I am satisfied with my viewing experience.
Awesome vid! Glad that I found it.
Got a new coil recently but that machine also confused me.
It’s so powerful that can only start at 3.5 and it kicking loud. And I can normally do lines at about 3.7.
I guess it’s depends to the machine
Hope it’s normal. 🥴
Very normal. If it's working how it should. Somewhere down the line this voltage confusion was thrown out there. I always run 8 volts bull crap. You only use what it takes for the machine to run correctly. 😁
@@TattooUniversity Thank you for replying me president 🙏 This channel is a community with love. ✌️ Peace
Thanks man! I really appreciate the info! Just got my first kit!
Glad to help. Hope you learn a lot.
lol who else had to turn up the playback speed to 1.25 , just talks a Lil to slow for me but good video
Not often do people create videos about something so specific yet crucial in the world of tattooing..
I try to do videos that will make a difference
So funny my eyes were closed before he said to do it
Same here 😅
Im 1st timer and i just ordered a tattoo set and this vid help me understand how to tune my machine.. I wonder if this also applies if its shading machine?
Machines are tuned the same. They are adjusted with different tension and stroke length. The basics are the same. You need everything lined up so it works. Once it is set to work you adjust it to do what you want.
Bruh tried to put me to sleep 😴
very helpful thank you
What if your kit gun wont work unless u crank the voltage... Do i need to tune my tattoo gun
Any tattoo machine you get online or from a kit will need to be tuned before using, good luck
This was fantastic. Thank you!
Bob Ross of tattooing!!
Thanks for all the videos! How about the shading? That should be higher voltage right?
I want to meet with this guy, trade some artwork, and smoke a bowl or two. Bet we can trade some war stories! Hahaha well explained sir!
That would be a good time. I have a lot of war stories to tell.
Oh, i've been going with a bit too slow power. (Traning on fejkskin)
Lol this guy's "one more time" is like my "5 more minutes".
Also, thanks to the cat that gave the 1.25x playback speed comment. Wish they had that feature in highschool 🤣
Good info though.
I love your voice!!!!!!!
Thank You
theres a lot more variables to that adjustment and final setting but you did hit the nail so to speak but the variables that also affect the final product are important to know and address before you ever clipped the cord and stepped on the peddle like point gap , spring reflex the angle the point screw and spring are set at then theres coil size armature bar weight and position and needle bar ,tube configurations and rubber bands holding bar in place all have a direct effect on that final power setting and quality of work it will do
There is a lot to fit into one video, so I try to break it down into several videos. It takes years to learn all this information. That would be difficult to condense into one session.
right on i was just saying that there are a lot more things that go into the pre check n insertion of a needle into someone than the lay man would even think could affect the outcome and i really enjoyed your video as it sounded like you actually get what it takes to do the work and unselfishly shared it to all thanks really not meant as negative criticism or disrespect just a point of my experiences and what i encountered along the way huck though he dogged paul rogers out has the best info for tattooing n even he missed some so i hope i didnt piss ya off as wasnt my intent just passing along my info to help another out and preserve the art n its artists as well as the mechanical aspects often unrealized untill they are affected by it .
Can u buy the plastic bag that goes around the cord in a store?? Like store store not online
Really good tips in here, thank a lot! Just a question, you’r setting up the voltage of your machine like this for human skins... But what about fake skin, who is stronger; adding 1 volt would help no? Thank and keep going the good work!
I listen to machine but it doesn't make that noise until 10 volts 😬 everyone talks about 7 or 8 volts but my machine doesn't sound like that at those volts. What could it be??
Will larger needle groupings need higher voltage to overcome the higher surface tension?
Clip have two ,but on my coil machine as only have one brass part for the power supply, looking for the second brass
Hey man I really appreciate you helping out people who just can't afford expensive equipment start off with what they have. My machine has a frame similar to yours with an angled rear deck. I just can't tune it so it runs properly in lower voltages. I've tried taking off some of the tension on the rear spring by bending it downwards, I can get it to run at very low voltages but even if I turn it up it just hits weakly and feels wobbly. If I put more tension on the rear spring, it hits nice and hard but I have to crank the voltage up to 8 volts, less than that and it won't hit hard enough. Make it a 10 if I put the rubber band on. I ran the supply through a multimeter and it checks off. The gap between the rear coil and armature bar is already very small, also the armature bar is lined up with the coils and vise. The front spring is off center because the contact post's hole where the contact screw goes was drilled diagonally for some reason, so the contact screw is angled to the side. Gotta replace that, I guess.
Anyway, do you have any advice for me? I'm going for a sculpting liner so I can start lining real slowly like you mentioned in the video about straight lines. I'm trying a dime gap at first since anything more than that and I have to crank the voltage up to 12v+, sometimes even for it to just run. Is it okay to tattoo with a high voltage if the machine is not chewing up my skin?
By the way my clip cord/foot pedal's wires are nice and fat.
The guy who sold me this one said those were 10 wrap coils, but I didn't cut then open to take a look. Is there any chance that the voltage issue has something to do with weak coils?
usually I have to see how the machine is set up. This way I can see if something is off. Send me some pics. juantyartist@hotmail.com
diesel why don't you try getting an apprenticeship like a real tattooer??
@@brianmackenzie3617 why don't you mind your business, 90 percent of "real tattooers" started out at home.
Good tattoo tips I started tattooing a mont ago
What coil machine or rotary machine would you recommend for a beginner and power supply??
Like your videos .
thank you for this video :)
I have the same tattoo machine and flame coming out from bar why is it normal ?? Thank u
are you willing to do a video on you tattooing and going through fundamentals while Tattooing a client and how to treat your client. I think you would get a lot of responses to a video like that. If your clients allow you to record and talk while tattooing them lol.
I'm actually working on that. Had someone coming over last weekend but they showed up too late. Problem is people being flaky. It is hard to tattoo and shoot video at the same time. Need someone there to use the camera while I tattoo. I'm going to try it again. Eventually I will find someone who can do the job.
It is actually easier just to tattoo yourself and shoot a video. Since I don't have a lot of room left for that I need to find clients who are willing to let me do this. Clients that will show up on time and not complain about me taking time to explain some things while I tattoo. I might have to do some free tattoos as incentive. Also getting someone who knows how to use a camera. I've been working on it. I think I'll get that done really soon.
Tattoo University Yea that's my problem I would do time lapses of my tattoos but getting a decent camera person is difficult. And I'm sure its hard to find someone to allow you to take twice as long to tattoo so you can tell the camera what your doing and why. Also yes people flake a lot in tattooing and its very annoying when you set IP your whole day sometimes week for specific tattoos and decline others cuz your busy and then they not show on time or at all..very annoying!
Tattooing is one thing. Learning how to videos yourself tattooing is another skill all together. Also explaining what you are doing while going through the process does slow things down. Then you have to get out of the way so the camera person can get a good angle. It is a process. Something you don't think about until you try to do it. Then you have memory cards that need to be changed during the tattoo. You have to take your gloves off and mess with a camera. It is an experience.
I encourage other artist to show what they are doing. I never intended to do tattooing videos. It just happened because I was trying to help some people get better. Then I decided to post them and help a lot of people out instead of just a couple. I've had to learn a lot about shooting video and editing video. I had to work out lighting issues and audio problems. I'm still learning that stuff. Then you have to work through the problem of explaining things to people. Sometimes it is difficult to tell people so you have to come up with ways to show them. You really have to put time into it. I think this is why you don't have a lot of people doing it. You have to be a teacher, actor, and a tattoo artist all at the same time. I think the best way to help improve the tattoo community is to share information. If someone is willing to do it then I have no problems helping them out.
My maschine sound all the same. Just louder and faster. It doesn't make this klick sound and chance the sound. Could this be or is something wrong?
This video was very informative, thank you!
right!
Thanks man! My sweet spot is 6.3
Most of my machines run from 5-7volts. I rarely go over that.
Depends on your machines. The larger the coils and the larger the frame the higher the voltage needed
Awesome video could you do one on your sanitation prep like how you wrap everything and prepare it!
watch video where I set up the station
I have a ? I have to use my machine at prety high volts,but still seem like not enough power,power supply is one of those dual liner/shader.sumthin is not rite n e ideas?thank ya
Machine tuning is the key. If the machine isn't set up correctly it will not tattoo. Learn how to tune it or find someone who can tune it for you.
Amazing video bro 👊 thank you 🙏
Finally a video that makes sense
Thank You
Could you do a video on why the needle drags or sticks to the skin please ?
@@Scooter3194 The tattoo machine springs don't have enough upward tension or there is too much hang. Put the needle in more or adjust the tattoo machine. I can do video.
Thank you because I’ve adjusted needle idk how many times and it still drags
@@Scooter3194 Machine needs to be tuned. You can try to loosen up your springs. Put it out to the side and bend it upwards. Then put it back and it will have more pull toward the contact screw. Might give you enough pull to get the needle out of the skin. This will change your duty though. Could be good or bad. Here we get into tuning tattoo machines. One adjustment will effect how the machine runs. Everything needs to be correct to work. You can try it though and see if that does the trick.
I hate the dreaded blowout of ink and the blurr of the untattooed pattern. And spotted lines due to poor circulation in the tip
Thanks so much for going over the clicking. helped a bunch!
You are welcome. Glad it helped!
So does this mean that you can use the same machine for lining and shading there doesn't need to be different springs or anything
This answer to that is a long and complicated one that people love to fight about. Let's see if I can answer in this comment. Hope your sitting down this could wind both of us. You can use the same machine to do anything you want. You can line, shade, and color pack with any machine if you know what you are doing. It also helps if you understand machines. Let's take it down another rabbit hole. Machines aren't liners, shaders, or color packers. They are just machines. People call them those three names to try and simplify things. You have faster and slower machines. You have different machine frames that allow for more or less stroke. The amazing thing is artist like different things. You can adjust the machine to do what the artist wants. I line with what someone might call a shader. It is a slower harder hitting machine with a longer stroke. A shader set up with less tension on the rear spring. If I move my hand faster I can shade with it. If I slow down I lay down a solid line. Take a "shader" sometime and put short tapered needle in it and start filling in color. The needle adjustments will effect how you can tattoo. Yes you can do anything with one machine if you understand machines, needles, and your art techniques. You can also adjust your machines so they do specific jobs. I can adjust a machine so it does line work better than shading. I can adjust a machine so it's easier to shade with it by adding more tension on rear spring. Certain machines will make it easier to do your job. Faster shorter stroke machines are good for one liners. Longer stroke machine with hard hit is good for color packing. The key point I'm trying to make is learn as much as you can. Knowledge will give you the power to make decisions because you know the equipment and how to manipulate it. You know the marks you want to make. Match it with a machine that allows you to make those marks successfully. So the answer is yes and no. You can adjust yourself or your machine.
Very good informations thanks for your Easily understanding explanations...
Wow you are amazing at teaching
I assume you'd use the same concept with rotary tattoo pens.
so what is the machine you used for that voltage?is it a liner or a shader coz i cant figure it out.....
up
This is a long complicated answer but I will try to make it short. Voltage varies from machine to machine. The amount of wire and quality of your coils will effect your voltage. The clip cord and power supply will effect your voltage. You need to know how the machine runs and adjust your voltage accordingly. Also depends on what you are doing. With a coil machine you can turn up the voltage and get a harder hit for color packing. Turn down the voltage and get a soft hit for shading. You need to understand how the machine works in order to understand what voltage to use. Typically cheaper machines use more voltage because they are lower quality. The wire is thinner wire and they usually are 10 wraps. More wire typically more voltage needed to run. Same machine with better materials will take less voltage to run. So when someone tells you to run your machine at a certain voltage they don't know what they are talking about unless they have experience with that machine. There is a way for you to tell how much voltage your machine needs. You turn the voltage up until you feel it hit hard enough to do what you want. Put your thumb under the arm bar nipple and feel it. It is only correct when the machine does what you want it to. If it still isn't working you need to tune your machine. There is probably more that goes into this. Too much to put in one answer. Short answer is do what works. If it doesn't work something is incorrect. Voltage is a variable that depends on other factors. Your machine set up and how it is built. What you are trying to do and your style of tattooing.
What is the best tattoo gun to get I have the Chinese kit can I get a 10 coil are a 8 coil I even have the pen it does not put in the ink in the skin right what the best gun to get
I just gotta set up from my brother...so i had my volts on 7...i was doin great for like almost a hour practicing on fake skin. an for some reason it wont go back down its stuck on 16 volts an the knob wont turn it down. What you think happend? Oh an my power supply didnt come with a power cord...i got a 125v power cord...but the box says i need a 250v power cord. You think this is the problem? The box isnt hot at all
When you're practicing stuff like this is good because you learn from it. From my experience you don't want to force things to work. You don't want something like this to break down while you're in the middle of a tattoo. It will make you look unprofessional and it will take a lot more time to finish the job. My suggestion would be to keep looking for some equipment that is better. If you have good or bad equipment always look for ways to improve.
I have had some really bad power supplies when I first started. I had to go through about four of them before I finally found one that worked correctly. When you get the cheaper ones they tend not to work like they should if you can eventually go for a better power supply. Having a really good power supply is a must and it will last you a really long time
@@TattooUniversity thanks!
You give me anxiety explaining the why who what where and the how..lol I get what you're saying but I feel like you could have made this a 5 min video
Dry eye commercial.🥴
Is that a liner ,or a shader machine. I'm still learning the difference ,and can you just use either one for both ?
You can use both. Typical liner machine is fast and has short stroke. Used with thinner inks. Typical Shader has longer stroke and higher tension on the rear spring. Yes you can line with a shader. I find it more helpful if you use a thicker ink. It all depends on what you like and your hand speed.
How about the amperage. How much do machines draw
What plastic did you cover your equipment with?