If you can not find your answer on how to fix a dead HDD in this video. I posted another video to show how to fix the PCB for a dead HDD . Here is the link to the new video : th-cam.com/video/M61MKqRGlDs/w-d-xo.html If you like the video hit the thumb-up 👍 and subscribe for more content like this.
You are a star, this just worked for me too. Some flux on the connector and heated with the soldering iron. Works again now. Never again will I buy a cheap HDD again!
@@fathizaky141200 Yeah, it is a liquid that prevents the metal from oxidizing rapidly. It slows down the process so that there is a good connection. I've done LED lights before and when I first did them, I didn't use flux and even though the Solder/SolderingMetal had contact between the LED and the power: the oxidized metal reduced/blocked the current from going to the LED light. So Solder makes it much easier to get a successful connection.
Try to tap the hard drive 4 to 5 times a bit harder. Seems like the read/write arm gets stuck in a problematic parking position. Just did that last night and my hard drive works like a charm again.
Great job, assuming someone badly needed the data from what is typically$100 drive these days, and said data is nor backed up elsewhere, and deems that data worthy of data recovery/drive repair services!
What worked for me: I tapped it a bit harder 4 to 5 times: now works like a charm again. I guess the read/write arm got stuck in an inconvenient position.
Thank you. I have a 1 TB SEAGATE BACKUP PLUS EXTERNAL HDD . I use it by attaching it with my honor 7x mobile through OTG for data transfer (bothside). I purchased it 11 months back from flipkart. I use it max once or twice in a month. I used it with desktop 3 times only since purchased. Yesterday when i was working with in by attaching it my mobile , suddenly one beep sound came and HDD light turned off. I performed safe remove process from top bar and after few seconds , it showed that " its safe to remove now" . I removed it and reattached it with mobile but no light no detection. Then again i removed safely and attached it in Sony laptop. It showed new usb driver installation. After completion of the same , no pop up came , no light on HDD , no drive shown in my computer . Then I went to printer & devices and found that it is showing the HDD there but when I went to its properties ; there is blank in VOLOUME TAB . In GENERAL TAB it is showing " device type : disk drive ; manufacturer : standard disk drive ; Location : on USB mass storage device ; device status : this device is working properly " . Another msg shows " windows cannot use this hardware device because it has been prepared for safe removal but it has not been removed from the computer (code 47) . To fix the problem , unplug this device from your computer and then plug in again ". I unmounted safely it by right clicking . Then reattached the same . Result is still same. Then removed. Restarted the laptop , attached again... same results... pls advise
Hi, I plugged in my toshiba hard drive, the led light was flashing and stayed on, it spins too, but my Mac just doesn't read it. Eventually, the led light went off. Could it be the connection problem? Should I try to solder the connection to fix it?
My external hdd.. Light the blue and stuck on it.. My pc cant recognized the hdd.. The sound is like a fan no clinking.. I changed the pcb i thought its the problem with the change of bios and firmware but still not workibg any one find it out.. What is the problem should be.. I really need help i have alot of important files
That was flux, not glue. It helps to make a good solder connection. It is important to use flux meant for electrical connections as the other sorts of flux will destroy the connections.
Hi there! I have 2 pcs of external hard disk with the same brand and same model. Suddenly one of it is not detected and i noticed the light is there when I insert it into the port but the light is not as bright as the other model that work just fine. I know this case is not similar with your video where the light is totally dead, but could this method fix it?
I think its the connection of my external drive because it used to just blink and just now, I reconnected cable after seeing your video and the light stopped blinking and I can hear it spinning like normal only think I want to see is it pops up on my PC. Any suggestions ??
Hi, i liked your video, I'm gonna try to do the same with my dead toshiba hard drive. Can I ask you... how or where can I capacitate to work with this technical issues? I don't know exactly how to look for it, like "technical hard drive support school", lol. I would be greatful. Keep like this!!
Found a fix so your drive doesn’t get corrupted. Turn off auto updates on your Xbox. You can also unplug your drive when you turn it off or unplug before you update
there is a light and my pc would detect it, but when i try formating the whole drive, its stuck for infinity...is there a way to make the hdd usable again? idc about the datas tho
Hi, please read this and reply. I have the same Toshiba model hard drive, when I connect it to the computer it lights up, and continuously blinks, but it doesn't show up on computer, I also hear normal sound of the rotating disk. I removed cover and visually checked that disk is super clean (without any damage) and actuator arm/slider was parked in its place. I also removed PCB and checked the contacts visually, also good condition. The only problem is that I don't know how to read the PCB to diagnose and fix the problem if it really is on the board. I know it sounds really random but if you could help me with that would be great - I can pay you depending on difficulty level lol =) I can send you pictures of hard drive condition itself or we can directly videocall... I have multimeter tester and soldering tool... If you can not, I will understand, at least I tried :) Thank you!
If the external hard disk drive is running but not showing in the computer /desktop and a sound coming out of it then what was the issue coming? Plse tell me the reason and solution for recovery.
I have the exact same device! Though my LED does function and the drive is spinning. I've checked it using Apple's Disk Utility App and it recognizes there are 14209 files stored on it but I can't "activate" it and "repairing" doesn't wrong. All that seems to keep me from using it is the error-message: Unable to read FAT (Input/output error). Please help!!!
If it is not "mounting" and using the repair tool doesn't work, then you would need to take in your external hard drive for repair. Apple software can only help so much when it may be a hardware issue
I bought the seagate onetouch, and after not even a month it stopped working. The led is off and doesn't turn on, but I can feel the HDD working when I pick it up, but my computer will not see it. What could be the problem?
I have the same problem too. 😑 Is it possible to swap board to another board with a sata port? I have a Toshiba HDD with the same board and port like this.
If they charger connector is completly lose could you also buy a new had and just use that circuit board? I just want to recover data from my old one but the connector has come extremely lose.
do you suggest buying a new cable if my hard drive stops working first? Because I don't want to risk damaging the hard drive if I attempt to get it repaired.
If the cable looks physically damaged then yes. Otherwise, listen for any noises or look to see if the light is blinking for indicators of what is going on
My PC detects my hard-drive. The icon and hard-drive name shows up on the bottom right to eject but I tried all the PCs in my house and I still can't open the hard drive and its not showing up on file explorer at all.
what about if the light does spin, i even connected the sata bridge connector and still does not work, i opened the drive and reader was in position, it actually spins as well, but nothing shows up on the pc,
I love that fix, but I have basic soldering iron. I could get the flux, but I worry that I wont be able to hit the pins with the right amount of heat. I am thinking about finding the same model Toshiba Canvio 2TB and switch the boards. Do you think that will work? Thanks for any help.
Hi sir.. how to fix the problem on this scenario? I also have toshiba drive, there is an LED indiscator.. However, the driver is not detected on laptop.. The LED keeps on blinking and the drive continous on spinning. this is 1TB drive.. Please help
I was wondering if you can help me, I have a 2.5 inch WD my passport ultra (4TB), 2017 version, suddenly it did not show the files and it does not eject when I eject it on my MacBook Pro, when I eject it, it comes back and it makes a very light sound, then turns normal, is there anyway to fix it rather than open it? Is it possible that the PCB is not working properly? I checked the HDD health and it says it's good nothing wrong with it, I installed the wd recoverit app and check it for a bit and it showed files, meaning I can restore them, but not yet cause I don't have enough storage, so in order to restore my missing files I am gonna need to buy a 4TB or 5TB one, that led me to make a search, I found out there are CMR, SMR and other types of drivers, I figured my WD ultra (4tb) 2017 might be a SMR drive, that is why it is faulty now or maybe it is the PCB! So, as I mentioned before I wanna buy another (4TB), that is why I wanna make sure that I buy a CMR one, Can you please give me a list of 2.5 inch (4Tb) drives that are CMR not SMR? Even if it was a 2015 or 2016 versions? Or any older, newer ones? Or any good reliable 2.5 HDD recommendation or advice? I would be grateful! Thank you
For me, the drive does spin, light is fast blinking, but doesn't read files. I have it hooked up to my Xbox as additional storage and have vital, irreplaceable data on it. What can i do?
I have a question if you don't mind. My HDD is 1tb, type DTC810, but everytime i plug on any pc, it only reads about 126mb and has some shortcut named "x". Any suggestion?
Hey I have Toshiba ext HDD (not the same model as yours) I dropped it and the led doesn't light up and it is not recognizing and the disk is not spinning. Will I be able to recover the files if I take to a shop?
With data recovery, it is always an attempt to recover, nothing is fully guaranteed. If you would like to send it in, we have all the information located in the description. Hope to hear from you soon! 😀
I am not sure where to post this question, I am sorry if it is wrong here. My wife has a Samsung s2 portable exteenal hard drive. I think the USB connector pins are dead. The connector is soldered to the drive. Can anyone suggest me someone, who could exchange the USB connector? Thank you in advance!
Hello! What is the board exactly? I mean what is its function? Can the board be replaced as a whole, without soldering, and if it is possible, where can it be found?
My portable hd was regularly connecting and disconnected issue but when I'm moving data it was corrupted and now all partition is showing but become Raw data but sometime on fresh connection it shows 1 partion internal data but unable to operate. Any idea
My external drive (Seagate USB 3.0) does not show in file explorer or disk management but the option to safely remove it is available and the LED light on PCB turns on. After I opened the case, disconnected the PCB and connected the drive to my computer using a SATA-to-USB3.0 cable, the option to safely remove is not available and the drive still doesn't show in file explorer or disk management. Any ideas on what may be the issue?
I want to ask. If your External Hard drive light is blinking but the vibration doesn't last long a minute. How to fix it? My game. In ps4 suddenly doesn't detect it nor my pc.
Hello sir. Thanks for the video. My device light is on and click sound from hard drive is heard but it is not appear in my computer. Can you help me? Thank you so much.
I have the same issue my external Toshiba has no power, but this happened after fallin from the 2nd floor on the ground, what can u tell me about it, after the drop it just didn't power up at all
Mechanical drives are very sensitive to drops. There are a lot of moving pieces inside them that help them work. If any part gets even a little bit of damage, it will not work properly. There is still a chance to get your data off even after drops. It will have to go in for specialized repair in these cases
Good day! I have my problem with my external drive. I used my external hard drive as a tool to download the drive for windows 11. After downloading the whole file needed for installation, my external turned to esd. Then, I turned to back to usb. Suddenly, all my files in usb are missing. I think they are gone. Please help me to find a way how I recover my important files in my external. What should I do?
I have a troubleshooting external hard drive that I can not get to work . I have tried everything that I could think of . I have videos and photos that I do not want to lose on it
What could be the problem if there is no light on the LED (not even Windows recognizes it) but the disk does spin? Two disks were damaged like this at the same time, I had both drives connected to a powered USB hub when they stopped working
If you can not find your answer on how to fix a dead HDD in this video. I posted another video to show how to fix the PCB for a dead HDD . Here is the link to the new video : th-cam.com/video/M61MKqRGlDs/w-d-xo.html
If you like the video hit the thumb-up 👍 and subscribe for more content like this.
Do you have an email address or another way to contact you
I own a Seagate
What do you to do to sodder the broken port?
Do you have shop
You are a star, this just worked for me too. Some flux on the connector and heated with the soldering iron. Works again now. Never again will I buy a cheap HDD again!
pardon me for asking, but what's a flux? is it the liquid he's applying?
@@fathizaky141200 yes it's the liquid he's applying
@@fathizaky141200 Yeah, it is a liquid that prevents the metal from oxidizing rapidly. It slows down the process so that there is a good connection. I've done LED lights before and when I first did them, I didn't use flux and even though the Solder/SolderingMetal had contact between the LED and the power: the oxidized metal reduced/blocked the current from going to the LED light. So Solder makes it much easier to get a successful connection.
@@fathizaky141200soldering flux/soldering compound
it's not the HDD being cheap it's people mistreating connectors. This is a standard connector.
wow your fixing really look legit man,,like other youtube channels where they first investigate and open the platter..
Even though I have a different HDD, it was a pleasure to watch your video. Thankyou.
Phew, this is TOO MUCH WORK!
Try to tap the hard drive 4 to 5 times a bit harder. Seems like the read/write arm gets stuck in a problematic parking position. Just did that last night and my hard drive works like a charm again.
not really.
Great job, assuming someone badly needed the data from what is typically$100 drive these days, and said data is nor backed up elsewhere, and deems that data worthy of data recovery/drive repair services!
Nice nice. Truly informative 🤝🏾
What worked for me: I tapped it a bit harder 4 to 5 times: now works like a charm again. I guess the read/write arm got stuck in an inconvenient position.
you gave me hope. my hard drive is broken now :(
Mine is working it's just that it Keeps getting errors when I connect it into my ps4
Thanks for this. Now works great
Do you have any advice on how to do this with out a soldering iron?
What tools are you using ?
Thank you. I have a 1 TB SEAGATE BACKUP PLUS EXTERNAL HDD . I use it by attaching it with my honor 7x mobile through OTG for data transfer (bothside). I purchased it 11 months back from flipkart. I use it max once or twice in a month. I used it with desktop 3 times only since purchased. Yesterday when i was working with in by attaching it my mobile , suddenly one beep sound came and HDD light turned off. I performed safe remove process from top bar and after few seconds , it showed that " its safe to remove now" . I removed it and reattached it with mobile but no light no detection. Then again i removed safely and attached it in Sony laptop. It showed new usb driver installation. After completion of the same , no pop up came , no light on HDD , no drive shown in my computer . Then I went to printer & devices and found that it is showing the HDD there but when I went to its properties ; there is blank in VOLOUME TAB . In GENERAL TAB it is showing " device type : disk drive ; manufacturer : standard disk drive ; Location : on USB mass storage device ; device status : this device is working properly " . Another msg shows " windows cannot use this hardware device because it has been prepared for safe removal but it has not been removed from the computer (code 47) . To fix the problem , unplug this device from your computer and then plug in again ". I unmounted safely it by right clicking . Then reattached the same . Result is still same. Then removed. Restarted the laptop , attached again... same results... pls advise
Hi what size screw driver did you use to open up the hard drive screws I can't seem to find the right size to loosen the screws connecting the board.
Search online for 'Samsung tools'. It's a star shaped point screwdriver.
whats the liquid thing put?
THANK YOU ...FOR THIS VIDEO 👌🙏👨💻 I WORKS FOR ME
Is it possible to replace the logic board itself in order the hard drive to function properly?
Bro it shows the light and we can feel the disk moving but it doesn't appear on any of my devices
did you get it fixed? is so please tell me how cuz im having the same trouble
Sameee
Same did you get it fixed
Same issue, I can't find a fix for this.
i have this issue did u fix it?
What is the solution for hard disk display obytes
My drives spin but the led light is not coming on and when I’m on my Xbox it doesn’t connect but I hear it spinning
Same
Same here. Lights on, spinning correctly but nothing detects it. Not computer, not xbox, nothing.
have you fixed it?
@@jonmac380 same here did you fix it
Same here any solution ?
Hi, I plugged in my toshiba hard drive, the led light was flashing and stayed on, it spins too, but my Mac just doesn't read it. Eventually, the led light went off. Could it be the connection problem? Should I try to solder the connection to fix it?
Same issues anyone to help out
My external hdd.. Light the blue and stuck on it.. My pc cant recognized the hdd.. The sound is like a fan no clinking.. I changed the pcb i thought its the problem with the change of bios and firmware but still not workibg any one find it out.. What is the problem should be.. I really need help i have alot of important files
Mine lights up but it makes very suspicious noises and doesn't show up. Likely corrupted data?
Hi, what is the glue you apply on the solders? Can you share the link to this product? Thank you!
That was flux, not glue. It helps to make a good solder connection. It is important to use flux meant for electrical connections as the other sorts of flux will destroy the connections.
Hey man what did you apply to fix it??
4:29
I used FLUX to re-solder any broken pins and restore connectivity to the USB.
what did you do to fix this? mines having same issue. i tried using electrical cleaner which did nothing.
Hi there! I have 2 pcs of external hard disk with the same brand and same model. Suddenly one of it is not detected and i noticed the light is there when I insert it into the port but the light is not as bright as the other model that work just fine. I know this case is not similar with your video where the light is totally dead, but could this method fix it?
I think its the connection of my external drive because it used to just blink and just now, I reconnected cable after seeing your video and the light stopped blinking and I can hear it spinning like normal only think I want to see is it pops up on my PC. Any suggestions ??
Hi, i liked your video, I'm gonna try to do the same with my dead toshiba hard drive. Can I ask you... how or where can I capacitate to work with this technical issues? I don't know exactly how to look for it, like "technical hard drive support school", lol. I would be greatful. Keep like this!!
What did you apply to the connectors??? I'm trying to repair mine 😢
What are you using to open the case?
This method works! Tqvm!
Tysm
May i know what is liquid put on the PCB board? Thanks.
It is Flux ... see link in the description.
Great! It's $34.99. Practically half the price of a brand new HD drive. No thanks!
Found a fix so your drive doesn’t get corrupted. Turn off auto updates on your Xbox. You can also unplug your drive when you turn it off or unplug before you update
there is a light and my pc would detect it, but when i try formating the whole drive, its stuck for infinity...is there a way to make the hdd usable again? idc about the datas tho
I'm also experiencing the same problem... I don't have the soldering tool and there's a lockdown too... what should I do!
my toshiba doesnt light up but you feel like its alive inside and it does get hot. is this the same way to fix it?
Mine too.. did u fix urs? :''c
Hi, please read this and reply.
I have the same Toshiba model hard drive, when I connect it to the computer it lights up, and continuously blinks, but it doesn't show up on computer, I also hear normal sound of the rotating disk. I removed cover and visually checked that disk is super clean (without any damage) and actuator arm/slider was parked in its place. I also removed PCB and checked the contacts visually, also good condition. The only problem is that I don't know how to read the PCB to diagnose and fix the problem if it really is on the board. I know it sounds really random but if you could help me with that would be great - I can pay you depending on difficulty level lol =) I can send you pictures of hard drive condition itself or we can directly videocall... I have multimeter tester and soldering tool... If you can not, I will understand, at least I tried :) Thank you!
Got solution???!!
Is it solved I am facing the same
same problem here
@@bhaskargowda-3955 found it?
mine's Led is on, sometimes it flickers and sometimes it doesn't and I can feel something vibrating/spinning inside
still not working tho
Did u find a solution
What's the fix?
If the external hard disk drive is running but not showing in the computer /desktop and a sound coming out of it then what was the issue coming? Plse tell me the reason and solution for recovery.
Dear same is the problem for me it sounds when i insert it but not showing up on pc... Did you get your answer?
I have the exact same device! Though my LED does function and the drive is spinning. I've checked it using Apple's Disk Utility App and it recognizes there are 14209 files stored on it but I can't "activate" it and "repairing" doesn't wrong. All that seems to keep me from using it is the error-message: Unable to read FAT (Input/output error). Please help!!!
If it is not "mounting" and using the repair tool doesn't work, then you would need to take in your external hard drive for repair. Apple software can only help so much when it may be a hardware issue
Hey when I plugged in the HDD , there's a light but the HDD not detected..
iman akim same
You will need a recovery tools to recover your data.
below your hard drive is a printed circuit board, remove it and clean all the electrical contacts with fine sandpaper
Hello! What's the brand of the FLUX? or any reference? Thanks in advance.
Hey sir.. how about the port is broken? Can be replaced? No shop want to do that 😭😭😭😭
Mine just keeps flashing but it does work, is mine fine?
I bought the seagate onetouch, and after not even a month it stopped working. The led is off and doesn't turn on, but I can feel the HDD working when I pick it up, but my computer will not see it. What could be the problem?
I have the same brand it lights up but my computer cant read it and it heats up so much in one portion can it be fixed?
what liquid are you applying to the thingies near the usb hub?
Rubbing alcohol
Flux
I have the same problem too. 😑 Is it possible to swap board to another board with a sata port? I have a Toshiba HDD with the same board and port like this.
What kind of oil did you put on it?
It is FLUX not oil, to help melt the solder and restore connectivity to the USB Pins.
@@lapfix thank you i have toshiba 1tb external hard drive has no power.. i will try this one..
If you think that what he put was oil please don’t try to fix it
Can i use a flux pen to attempt this fix? Or does it need to be heated, pressed down etc.
If they charger connector is completly lose could you also buy a new had and just use that circuit board? I just want to recover data from my old one but the connector has come extremely lose.
but i don’t want to open it
do you suggest buying a new cable if my hard drive stops working first? Because I don't want to risk damaging the hard drive if I attempt to get it repaired.
If the cable looks physically damaged then yes. Otherwise, listen for any noises or look to see if the light is blinking for indicators of what is going on
@@lapfix sounds good. Right now I'm thinking it is the connector on the hard drive because it does look a little worn now that I've inspected it.
So you just heated up the connections and applied liquid fluix...how doeas this repair the connection?
Can you help how to fix if the cover has a cut and the inner part will be damaged just asking
Will super glue work as well or no?
No, You will need to use soldering tools.
@@lapfix ive seen the flux in those syringes or whateevr, are those okay?
Hit it hard 5 times with a hammer
Do u need a solder iron or anything else as well? Or can i just buy flux in the syringe and apply.
In the issue I had it was only the connection. Any additional work you need to do see the tools section in the description.
thank you. I will try it on my adata nho1 nobility
what did you use to open the hard drive?
Most of these are usually held in by clips, a flat edge should help pop it up
Is there any case for this hard disk
I have some question ? Can you answer please
Does the hard drive circuit board needed to be heated up on the USB connector before adding the Flux?
I'm getting power into mine but it's leaking oil and not showing up at all. Can I recover the data?
My PC detects my hard-drive. The icon and hard-drive name shows up on the bottom right to eject but I tried all the PCs in my house and I still can't open the hard drive and its not showing up on file explorer at all.
what about if the light does spin, i even connected the sata bridge connector and still does not work, i opened the drive and reader was in position, it actually spins as well, but nothing shows up on the pc,
I love that fix, but I have basic soldering iron. I could get the flux, but I worry that I wont be able to hit the pins with the right amount of heat. I am thinking about finding the same model Toshiba Canvio 2TB and switch the boards. Do you think that will work? Thanks for any help.
Replacing the board is not going to work. You have to remove the firmware chip from the old board to the new one.. Each HDD is unique.
Hi sir.. how to fix the problem on this scenario?
I also have toshiba drive, there is an LED indiscator.. However, the driver is not detected on laptop.. The LED keeps on blinking and the drive continous on spinning. this is 1TB drive.. Please help
Exactly the same scenario! But with 2TB drive. Did you fix the problem mate?
I was wondering if you can help me, I have a 2.5 inch WD my passport ultra (4TB), 2017 version, suddenly it did not show the files and it does not eject when I eject it on my MacBook Pro, when I eject it, it comes back and it makes a very light sound, then turns normal, is there anyway to fix it rather than open it? Is it possible that the PCB is not working properly? I checked the HDD health and it says it's good nothing wrong with it, I installed the wd recoverit app and check it for a bit and it showed files, meaning I can restore them, but not yet cause I don't have enough storage, so in order to restore my missing files I am gonna need to buy a 4TB or 5TB one, that led me to make a search, I found out there are CMR, SMR and other types of drivers, I figured my WD ultra (4tb) 2017 might be a SMR drive, that is why it is faulty now or maybe it is the PCB! So, as I mentioned before I wanna buy another (4TB), that is why I wanna make sure that I buy a CMR one, Can you please give me a list of 2.5 inch (4Tb) drives that are CMR not SMR? Even if it was a 2015 or 2016 versions? Or any older, newer ones? Or any good reliable 2.5 HDD recommendation or advice? I would be grateful! Thank you
What if the light is on and the drive is spinning but it just doesn't work? I use it for my xbox one.
I have same issue. Can't figure out what the problem is.
for my hard drive the pin is broken only 2.0 is working
any solution for that?
Yes , create jumpers and get your data ASAP.
What 2.5" portable HD are better: Toshiba (e.g. Canvio Advance) or WD (e.g. Black)?
Canvio advance very bada choice
For me, the drive does spin, light is fast blinking, but doesn't read files.
I have it hooked up to my Xbox as additional storage and have vital, irreplaceable data on it. What can i do?
I guess same is happening to me n mine is Lenovo… I don’t have those tools 🛠 but all my music data’s are inside the hard drive…should I do the same?
I have a question if you don't mind. My HDD is 1tb, type DTC810, but everytime i plug on any pc, it only reads about 126mb and has some shortcut named "x". Any suggestion?
Hey I have Toshiba ext HDD (not the same model as yours) I dropped it and the led doesn't light up and it is not recognizing and the disk is not spinning. Will I be able to recover the files if I take to a shop?
With data recovery, it is always an attempt to recover, nothing is fully guaranteed. If you would like to send it in, we have all the information located in the description. Hope to hear from you soon! 😀
I am not sure where to post this question, I am sorry if it is wrong here. My wife has a Samsung s2 portable exteenal hard drive. I think the USB connector pins are dead. The connector is soldered to the drive. Can anyone suggest me someone, who could exchange the USB connector? Thank you in advance!
Are they physically broken? Either way, we have our contact information in the description if you want to recover the data
need to fix it in a vacumn room ?
Hello! What is the board exactly? I mean what is its function? Can the board be replaced as a whole, without soldering, and if it is possible, where can it be found?
The solder connects the board unless there's a hidden plug.
My hard drive spins inside but doesn’t light up on the outside mine is for an Xbox one there’s nothing that shows my situation
What did u do because same prob with my drive.
this is happening to everyone, probably because of the last update rip
My portable hd was regularly connecting and disconnected issue but when I'm moving data it was corrupted and now all partition is showing but become Raw data but sometime on fresh connection it shows 1 partion internal data but unable to operate.
Any idea
Mine has the same problem not turning on but I tried it with the same wire on my other storage device and same thing is it the wire??
My external drive (Seagate USB 3.0) does not show in file explorer or disk management but the option to safely remove it is available and the LED light on PCB turns on. After I opened the case, disconnected the PCB and connected the drive to my computer using a SATA-to-USB3.0 cable, the option to safely remove is not available and the drive still doesn't show in file explorer or disk management. Any ideas on what may be the issue?
I want to ask. If your External Hard drive light is blinking but the vibration doesn't last long a minute. How to fix it? My game. In ps4 suddenly doesn't detect it nor my pc.
Hello sir. Thanks for the video. My device light is on and click sound from hard drive is heard but it is not appear in my computer. Can you help me? Thank you so much.
My segate hdd is dead coz of a shower in rain, will it work again ?
My usb completely is detached, is it even worth trying to solder it?
Hi, mine fell 2 times and now it won't work? There is no light showing. What should i do?
My external HDD keeps blinking but is not shown...device manager doesn't show it as well...what to do in this case..? Thanks.
Usually there is an issue with the hard drive physically, best thing would be to take it in to recover the data
@@lapfix thanks!
did understand what you did ? did you just clean the pcb or what
I have the same issue my external Toshiba has no power, but this happened after fallin from the 2nd floor on the ground, what can u tell me about it, after the drop it just didn't power up at all
Mechanical drives are very sensitive to drops. There are a lot of moving pieces inside them that help them work. If any part gets even a little bit of damage, it will not work properly. There is still a chance to get your data off even after drops. It will have to go in for specialized repair in these cases
My hard drive was damaged by a magnet,
Is it possible to recover the data?
We do data recoveries on damaged drives. We have all our contact information in the description
Where I can get this flux plz? I have this problem with my t hard drive.
You can get it from Amazon : AMTECH NC-559-V2-TF Solder Flux - 30cc
@@lapfix Thanks I will try this way hope it works.
Can i use Flux Amtech NC-559-ASM-UV(TPF)
Or AMTECH RMA-223-UV Soldering Flux 10CC
mine is spinning and shows the led for a while before the light turns off but nothing that’s downloaded on it will come up
Mine blinks but after a blink it stays solid blue what would that be
Good day! I have my problem with my external drive. I used my external hard drive as a tool to download the drive for windows 11. After downloading the whole file needed for installation, my external turned to esd. Then, I turned to back to usb. Suddenly, all my files in usb are missing. I think they are gone. Please help me to find a way how I recover my important files in my external. What should I do?
I have a troubleshooting external hard drive that I can not get to work . I have tried everything that I could think of . I have videos and photos that I do not want to lose on it
What could be the problem if there is no light on the LED (not even Windows recognizes it) but the disk does spin? Two disks were damaged like this at the same time, I had both drives connected to a powered USB hub when they stopped working
Can this flux used in Seagate external drive ?
Yes, As long it is a connection issue. Please see tools section in the description for the Flux I used.
What about the platters making noises the light comes on but the drive will not read. It shows in Windows, but you can't access files.
Sounds like a mechanical issue. We work on that issue as well. All our contact information is located in the description