Qidi X Max 3 Unboxing and First Review - 3D Printing POWERHOUSE
ฝัง
- เผยแพร่เมื่อ 30 ก.ค. 2023
- Pre Order your Qidi X Max 3 here: s.zbanx.com/r/WnsUztTKQti8
Thank you for watching and don't forget to subscribe!
We hope you enjoyed our first look and impressions of the new Qidi X Max 3, which definitely impressed us more than we were expecting and we can’t wait to bring you some HUGE projects with this printer very soon.
Qidi did supply us with this printer but on the basis that we gave our honest opinions during our review.. which we hope you found helpful!
For more Play Conveyor videos and 3D models you can find us AND our designs below ⬇️
LATEST DOWNLOADS & COMMERCIAL LICENSE TO SELL OUR PRODUCTS:
💾 / playconveyor
🎥 TH-cam - © / @playconveyor
📸 lnstagram - / playconveyor
🎙️TikTok - / playconveyor
🙎♂️Facebook - / playconveyor
Print More. Play More. - วิทยาศาสตร์และเทคโนโลยี
This is so cool!!! Looking forward to showing more work😘
Thank you!!
if bambu labs made a 300^3 or even 350^3 printer they would take over the market. I for one would drop 1500-2000 easily for one of those. I cant wait for that day and i hope its sometime this year
If their customer service didn’t suck so bad…. Qidi has the best service in the industry and they don’t repair parts, they ship new ones quickly if anything breaks.
Same here. I bought a QiDi Max3 because I couldn't wait.
Referring to the latest official statements from bambu they still don´t plan bigger sized printers than the x1 carbon so they literally stuck at the 256 mm square print size. I got the X Max 3 myself and used to print with the reality Ender 5 plus for bigger prints before - but even with some optimization as Bondtech extruder among other things the print quality was still average (in the best usecases) and 4 times slower than the Qidi. Otherwise the Qidi does not reach the quality of my Raise 3D IDEX which has - to be honest - a complete different prize tag an still is much slower than the Qidi.
Dont be an "apple fanboy" lmao. There are much better current released large volume printers like the Kobra 2 Max (it makes flawless prints) Bed leveling is amazing. Does a larger volume than bambu will ever produce.
You do know that anything you do on a bambu printer gets sent to them. any gcode any stl everything you put in that software. You can not do anything that requires a NDA. If you are serious about doing prototypes and dont want others to have access to your design you are not going to want to do it on a bambu printer.
I just ordered the Qidi X Plus 3 and it is amazing, it's so incredibly fast and prints well
*I put my QIDI on a store-bought ball-bearing turn-table screwed on to a 18" plywood sqaure also bought at the lumber store for $25.00 total / Now I can spin it around to the rear easily.*
This printer is giant bigger than my x1c I also like ur humour tbh
It’s insanely big!! I’m falling in love with it!
Very cool 3d printer
I've had an x-plus since it came out and I love it. It's a workhorse. If this is the same build quality as my x-plus, it's worth the money.
You are a legend
Thanks just subbed. I'm curious about firmware. If it is running klipper and has fluid access, are you able to change config file? Can you do things like add ABL/auto purge that only does probing to the size of the object instead of the whole bed? This is easy to do with stock klipper on any machine. Im hoping you can still manage macros and change config for things like this. Thanks!!
Im stuck on P1S vs this or plus3 vs k1. Also they made a camera for this and ams coming soon.
the filament loading system had me stumped for about 15 minutes. ive never used a 3d printer before and we got this one at work so i set it up.
I know on my other printers i put a longer petf tube coming out the side but does this one have a box you have to load it into? It was only shown for a sec
SO, is if you only get one, Qidi Max 3 or the Bambu X1 with AMS? Thanks for the video.
How does it compare to Bambu Lab X1-C? Is the lack of sonar a deal breaker, or does it manage without?
At least you printed something other then PLA, because that is why i want to buy this printer, to use high temperature abrasive filaments. I would like to see more prints with that and the hardened nozzle. And why you set the chamber temperature to 50° and not to 65° which is the max possible temperature, every Kelvin counts ?
Thanks for the watch! Yes definitely, since we’ve had it it’s basically being used to print TPU, ASA and Nylon, so far it’s not failed once and the results have been excellent! The 50c was just to save a bit of energy, even though would be very minimal saving, I’ve found ASA prints fine at 50c heated chamber… especially the Filamentive stuff!
@@playconveyor Which is the strongest ? Polycarbonate ? Most are blended anyway and should be possible to print with the qidi x max 3.
What software do you use to prepare the files to add supports and everything?
you can add a camera yourself.... theres a usb on the motherboard for it... qidi has a video guide on installing one ... its really easy.
also regarding the filament.... put it at the rear side inside the dryer box.... not on the back.
btw, the dimensions width and depth is actually smaller than the og xmax... which had a smaller build area
Could you post a link to the video guide on cam install? For some reason I didn't see it...probably just missed it.
@@steveh8724just grab the camera and it comes with instructions
That is a big printer 😅 I also felt the filament spool holder… over engineered spool holder needed!!
Oh definitely… an excuse to get on fusion again! 😎
I'm sure an extender can be made to top mount
@@kyky7kyle7 yeah definitely some post design work to be don’t by us in next couple of weeks for the spool holder!
actually smaller in size than the original xmax
As soon as I seen that paper gap check I was done lol. I'll wait for bambu to make a bigger model.
isn't it just for first initial level setup for calibration you never need to do it again ya sook lol
@@jamierichards925 I've only seen people have problems with these since I said this 2 months ago. These things are garbage.
Nice video title
I just setup my x-max 3 a couple of days ago...I contacted support asking what type of filament was sent...they responded it's their rapido PLA
Ah makes sense.. it printed really well in fairness! Seems to keep up with the speed! How are you finding you’re X Max?
@@playconveyor This is my first 3d printer and so far I really like it...I just wish there was an actual manual for it besides just the quick guide. Thanks for making this video...I now know how to clean any jams in the extruder... I didn't have any issues like you did. Yes I do think the filiment box on the back sucks. I bought some bowden tube and I'm going to try with the box next to the machine...not sure if that will work...
@@davsyl94 is online under support
Nice thumbnail
Needs multilcolour to be competitive tbh
It’s a really interesting topic is multicolour 3D printing.. I’m not convinced it’s there yet because of the waste and time it takes! I’m still waiting for someone to come up with competition for the AMS!
@playconveyor yeah it does take look long and I was hoping the prusa xl was the solution. But the printer seems so slow also :(
Xmax3 ams from qidi is coming soon.
It really. Multi color is still a bit of a gimmick. It wastes an incredible amount of material. Unless you’re doing an IDEX setup, single extrusion multiple color prints are a huge waste of time and filament.
It depends o what you want from a printer. I want speed an quality. And build volume is way more important than colour changes.
Ams is awesome but its not a deal breaker for me.
Havent had a printer for a while . I found them too frustrating. I guess the question for me is, why does a printer in 2023 still have problems like the layer shift that needs the butter to go through customer support and mess with stuff?????? Its frustrating
Manual leveling???
Only for the first calibration… then auto levelling! I can’t make my mind up on in.. one hand it’s inconvenient, but on the other it means I can dial in exactly how I want my first layers to be..
looks like a toaster oven though lol
Is so want a reply from this guy
👍🏼
Thanks so much!!!!
My dream = Meet you
Yes it does atleast that's what my ex told me 😔
"It looks nice, I think it's a smart looking thing" How much did you get for saying that!?
We only ever do reviews where we have full and unbiased control over the content… which Qidi were more than happy to agree with, which was really refreshing to see from a company! It’s the only way to give value to you guys and the company…
We think it’s a pretty cool looking machine.. what do you think?
looks great to me.... and im not getting a thing.
but then again... i have 3 qidi machines, theyre reliable workhorses
Calm down bud. He just said the thing looks nice. He's not on his knees slobbering knob.
"Qidi" pronounced as "Chee Dee"?