ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2024
- Trying to figure out how to take apart your Samsung refrigerator? This video shows how to disassemble some of the key components of the refrigerator. Use the table of contents below to jump to a certain area of the refrigerator.
Table of Contents:
0:00 - Intro
0:17 - How to remove ice maker
2:43 - How to remove refrigerator evaporator motor & cover
4:27 - How to remove water filter case assembly (Includes filter head and water inlet valve)
7:02 - How to remove left door
8:17 - How to remove freezer evaporator motor & cover
9:43 - How to remove condenser fan motor
10:37 - How to remove main control board
Refrigerator model shown in video: RF263BEAESG/AA
Appliances break, but repair & maintenance doesn't need to be difficult. Find the right part for your job at partsdr.com/
We sell new OEM appliance parts for Whirlpool, Maytag, Kenmore, Amana, Estate, Roper, Frigidaire, Electrolux, Tappan, Westinghouse, Kitchen Aid, Jenn Air, Bosch, LG, Samsung, and more.
If you found this video helpful, please click the thumbs up button and leave us a comment below.
Connect With Us:
Facebook: / partsdr
Twitter: / parts_dr
Repair Forum: forum.partsdr.com/
Blog: partsdr.com/blog/
Subscribe to our TH-cam channel: / @partsdr
#PartsDr #MakeAppliancesGreatAgain #Samsung - แนวปฏิบัติและการใช้ชีวิต
Very helpful. I had a loud noise coming from the evaporator fan, figured I would be buying a new fan motor. After removing the cover I discovered that the ice buildup and the lines had built up to the point the fan blades were striking the ice. Removed ice and reassembled. Quiet as a church mouse now.
Nice job fixing it!
I got the same problem. This video is very helpful. Thx, Parts Dr!
Thank you!! Parts Dr!! You are better than Samsung A/S Center.... - Great thanks!
Great Video. Very Helpful. Thanks
Thanks for explanations!!! That was so helpful 👍👍👍👍
We are glad that you found it helpful! 👍
Good video! Thanks for sharing this knowledge.
Thanks! We are glad you found it helpful!
Thank you so much, saved me a headache
Awesome 👊
Fantastic , great video
Thank you very much. Best tutorial I've ever watched
Thanks!
@@PartsDr I'm sad you don't do international sales
I have this exact model so it was a great example - my center shelf support and evaporator cover came from the factory not properly attached and have to have a repair tech come out to fix - now I see what is wrong or at least what to do to see why the shelves do not set level - thanks
Can you please tell me what is at the bottom of this fridge that looks like a plastic guide for something and it touches the ground.
Excellent Job, I still think I need to hire a local pro
Thanks!
Thanks, very useful! 👍🏼👍🏼👍🏼
Great!!!!
How do you remove the cool select pantry top
I need to remove this to clean the glass, but I don't want to go through the trouble of completely disconnecting the water filter
Nice video thanks for sharing.
You're welcome!
Very helpful video...
Great to hear!
Thanks, the only thing missing is how to remove the interior door panel, I'm trying to remove the little braket that holds the hinge in place because it is not aligned with the entire assembly and keeps braking the hinges. Thanks
Thank you
You're welcome!!!
Very good video
Thanks! We are glad you found it helpful!
Have a major buzzing/humming noise coming from the back of the fridge where the water lines go in. I do have water hooked up.also, still makes noise after i shut the ice maker off. Any idea how to diagnose or fix this? (PS- it’s not the evaporator fan rubbing on ice)
I've been watching your videos for a long time now to fix several problems on my Samsung fridge. I was looking at this one expecting to find a clue to a problem still persists....: The back cover of it is seatting too much and constantly in the upper right corner, where the ice maker is located. So much that the metal cover began to rust some time ago. I took out the water hose to the ice maker looking for a puncture or if it was out of place with no results. Everything seems to be fine. There is a lot of ice build up aroung the ice maker. I fixed it twice already but I can not get rid of the problem. Could you suggest me something to find a final solution ? I have been asking some other technicians but I had no answers. I would really appreciate yout attention and expertise on this subject. I do not want to spend more money on parts until I know what the real problem is. Thanks a lot, Ramon Perera, Miami
What a great vid mate 🙏 , im hoping to find out how to fix the ice / water mechanism - once depressed the water supply doesn't turn back off - i have had to disconnect the water from fridge. Thankyou
Hard to diagnose over a TH-cam comment. It could be a bad dispenser switch, bad water valve, bad main control board or something else.
How do you remove the flex zone basket????
The tolerances are so close, it's almost impossible to reinstall the shelves, not to mention more critical parts. Thanks for the information that Samsung is apparently unable to provide. It's not a brand I'll favor in the future.
at the 4:27 mark to remove the water case assembly. i press in the two tabs and i cannot get it to release!! any suggestions?
Excellent, great video!, is there any link of spare parts that you would recommend for this exact model? Thankyou
I have a fridge that Samsung could not fix. The technicians told me that it may be and electrical issue that they cant get to. They even changed out the computer board. Has that happened to anyone else? Sounded like they just gave up. But now i have a $2700 fridge that does not get cold. Any ideas?
In removing the refrigerator evaporator cover, I followed the instructions to the letter, however the thing simply will not come out. Is it possible it is so iced up that this is why it will not come out?
Yes, that is likely what is happening.
Hi I m from India using Samsung side by side 585L from 7year want to know can I remove back side compressor Fan and once I clean that hot pipes behind fans with water n blower clean well but after compressor wasn’t start I check everything thing in inverter but there was no fault then I waited for dying of hot Coil I thought May there was any sensor in that coil which controls coil cooling and compressor start stop. After waiting for 30 to 40 minutes and compressor started normally no issue want to is there any sensors in Hot coil behind I always clean in 6 months but this time I did water splash to to and I got know this can I clean with always next I have two push buttons in despenser one for ice and one for water but there no Led light to show I check inside there was a circuit for LED but no component so I fix one Led to work on dispenser switch it glow with vibrations of current and not too much light so dropped my idea pls let me how to that because at in dark we can see
properly in dispenser and how to detach both door size long round Pipe shape handles and how to stop water flow coming from fridge and freeze coming from inside and falls on floor when it in defrosting mode pls reply Thankyou
Your video is great and very helpful. One thing I did not see was how to remove the flip top over the cheese drawer. Any advice?
You might be looking for this video here: th-cam.com/video/ztLzfRDPfXE/w-d-xo.html
Do you have a video on how to remove/replace the Damper Control Assembly?
Sorry, we do not for a Samsung refrigerator.
Is there any way to take the back off the fridge??? A connector burnt where the evaporator cover fan plugs into the little housing at the upper left. There has to be a way to replace that harness or get at the back of the connector to try and wire a new one, no???
No, the cabinet is foamed in place and it is not designed to be taken apart.
Is it possible to fix the clip where evaporator fan connects to the back of the refrigerator. Mine was rusted and when I unplugged it broke one of the pin.
We do not know of a fix for this. We have heard of some people attempting to cut into the liner of the refrigerator to try to splice into the wiring.
How do we clean the drip pan? It smells and makes the fridge smell. But appears difficult to actually remove to be able to clean it.
Also how do you remove the glass from the shelves? There is dirt under the edges.
The drip pan is not something that can easily be cleaned. Check out 9:43 for this area of the refrigerator.
The glass can be removed from the vegetable cover assembly, but the glass in the upper shelves cannot be removed from the plastic.
I used a knife to pop up the white squares holding the glass took the glass off after I removed the entire shelf and after I cleaned it I popped the squares back on
How can I access the refrigerant lines behind the plastic interior. Mine freezes up and I believe it is because of it going from a uncondioned to conditioned environment.
2:43 and 8:18 show removing the evaporator covers to access the evaporator coils. If you are looking to access something inside the wall of the refrigerator, that is not serviceable.
My problem is that the fan motor connector socket (the one that is mounted on the interior wall shown at 4:16) is broken (the pin inside the socket is gone). How do I replace it? Do I need to disassemble the whole back cover to have access to the wire that is connected to the socket? That seems like a mission impossible.
If it is the connector on the refrigerator wall side, those parts are not intended to be serviceable. Everything inside the wall of the refrigerator is foamed in place from the factory which makes servicing those pieces very difficult.
How to remove the interface board ?
This video here might be what you are looking for? th-cam.com/video/dM8c5o-aTsE/w-d-xo.html
Worst refrigerator ever
I totally agree!