Yes pretty much all HID and LED has a ballast. With the HID it’s better to have a harness that connect to the battery, if not some cheap kits one might be on and another no. Then you have to turn off and on few times before both comes on.
I drive a 2018 Forester. Are these lights Subaru approved? I would like better lighting I just don't want to install lights that will burn the protective plastic or wiring.
How well do these hold up with off-roading ? Dirt, dust, mud and deepish water crossings? My concern is the cooling fans and the ballasts looked like they were vented. Thanks.
Just a question I have a 2017 Forester and I have halogen headlights can I just replace the bulbs and it'll still work? Or do I have to switch out the entire headlight unit with a projector?
Yes, the headlight conversion is designed for the stock halogen housing. Also, there are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K or 8000K lights on the road because they are more natural to the human eye.
I've just installed these and have had two drivers in total flash me so far. We were also on a hill (either I was going down and then up or vice versa). Do not stare directly at it, it is BRIIIIGHT
Unfortunately, you are not able to swap your stock HID to aftermarket LED as the products are incompatible. The ballast and bulb fitments are entirely different. It would entail swapping out your entire housing and stock wiring, which we do not recommend.
Great video. I would like to order these, but my only concern is that this blind oncoming traffic. They look VERY bright. Will the Auto feature still work to turn lights on when it gets darker?
Yes, the auto feature will work exactly as it does with your halogens. Also, there are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K lights on the road because they are more natural to the human eye.
Ok, I have a base model 2014 Forester as my winter car. I am in canada, is the link above the exact ones used in the video? So, just to be clear, you think if I order the ones in the video, they won't be distracting to oncoming drivers?
Yes, the product linked in the description is the exact same as installed in the video. There are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K lights on the road because they are more natural to the human eye. For this reason, we only carry the 6000K color for headlight bulbs.
I'm interested in upgrading my Subaru headlights but noticed the disclaimer on your website that these are illegal. Can you shed some light, no pun intended.
2014 Forester Premium - for the high-beams you suggest a 9005 LED. Since the highs and DRL are controlled by the same bulb - how does the LED adapt as a DRL?
There would not be any issues when installing the 9005 kit on your highs, as it would also upgrade your DRLs. The kit will work for both your highs and DRLs without any problems, as our LEDs are designed to dim once your DRLs ignite.
Yes, here is the correct H11 bulb fitment for your 2014 Forester: www.precisionled.com/premium-h11-21-smd-5730-led.html Please note, this is for a single LED bulb, and you would have to adjust the quantity to 2.
Both the parking light and trunk light would use the same T10 bulb, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
Hi there, i have few questions about this product. 1. Just to make sure, this will work on a 2017 base model 2.5i forester right? 2. Is the pricing of $139.99 for both sides or just one side? 3. Do i need to re-aim the lights after installation? Or are they already set at the correct height? Thanks
Thank you for your interest. Yes, the kit linked in the description is compatible with your 2017 model. The 139.99 cost is for both sides of the vehicle. No, you do not typically have to adjust the headlight cutoff line after installation. The LEDs would be set to the correct height.
just picked up a 16 forester xt touring. Are these considered as an upgrade from the factory HIDs and are they street legal? I also, wanna get an led high beam replacement.
Unfortunately, you are not able to swap your stock HIDs to aftermarket LEDs, as the products are incompatible. The ballast and bulb fitments are entirely different. It would entail swapping out your entire housing and stock wiring, which we do not recommend.
We do not have an installation video specifically for the 2016, but it would be the same installation process as shown in this video. The parking light would use a T10 bulb, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
Sorry, a 2012 Forrester headlight has a dust cover which does not allow anything larger than a H11 bulb to fit. I know this because I have a 2012 Subaru Forrester
My bulbs no where to be located, i have the steering responsive light. Does anyone know how to change the headlight bulbs? 16 forester xt premium australian
Thank you for your interest. No, it does not matter in this vehicle's case, as the housing is designed to shine line evenly onto the road. Also, our LED bulbs come with a great even light pattern. Regardless, you should only be able to install the bulb into the housing in a single orientation.
You can install on your highs if you like. We just found that to be less popular, as not many people use their high beams out here in California. If you would like to install on your highs, you would use this kit: www.precisionled.com/premium-9005-cree-led-headlights.html
Do you by any chance have any info about 2013 Forester DRL/High Beam LED swaps? I've been reading online that I would need to disconnect the DRL resistor, but I can't locate it. All the info I've found online have only been for 2014 models and newer or 2012 and older, but absolutely nothing on 2013. Any suggestions would help. Thanks in advance!
For the high beam swap you would install this kit: www.precisionled.com/shop-by-led/headlight-leds/9005-led.html Our products call for a simple plug-and-play installation, so you would not need to do anything other than follow the instructions in the video above. There would not be any issues when installing the 9005 kit on your highs, as it would also upgrade your DRLs. The kit will work for both your highs and DRLs without any problems, as our LEDs are designed to dim once your DRLs ignite.
You can find our Legacy LED installation here: th-cam.com/video/IuEn1-VZw3M/w-d-xo.html The headlight installation would be identical to as shown in this Forester installation video.
Thank you for your interest. You can find the proper LED for your license plate here: www.precisionled.com/t10-5smd-leds.html Please note, you would have to up the quantity to 2.
No, the installation shown is for the low beams only. If you would like to install on your highs, you would use this kit: www.precisionled.com/premium-9005-cree-led-headlights.html
You would have to add the courtesy T10 bulb to your cart separately, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
Hi! This video is specifically for the 4th generation, years 2012-2019. You may be referring to a 2020+ headlight assembly, which we have no had a chance to work with yet.
Thank you for your interest. Yes, we do carry a kit for the 2017 Subaru Forester low beams, which you can find here: www.precisionled.com/premium-h11-cree-hl-gl-headlight-led.html Please note, this kit is only compatible with your vehicle if your vehicle comes with stock halogens, and NOT stock HIDs.
I was told that the headlight housing designed for Halogen does not properly reflect LED lights, as the direction(s) of emission are quite different. Also that if/when changing bulbs like this, one needs to monitor and possible adjust the aim of the headlights. Else they may well be shining above recommended heights, and this all is why they are not deemed legal for DIY changes.
This is how you blind other people. LED bulbs in a reflector housing is such a dick move. You can even see a PERFECT example in the shot where he has one halogen bulb installed and one LED. The halogen isn't directed into the camera on the right of the frame, but the LED on the left of the frame is not a focused beam and some of the light is directed at the camera. Get projector housings or don't do LED.
![[ENGSUB] UNPRODUCTIVE DAY ใช้ชีวิต (เปื่อยๆ) ด้วยกัน 1 วัน! | OUROAD CLOSEFRiEND SS2 EP.9](http://i.ytimg.com/vi/pyYKZ3kra9w/mqdefault.jpg)
Best video for these lights I've seen after like 15 other ones that were terrible! Thanks for the detailed description and the best angles
Do all HID to LED bulb conversion kits like this require a control ballast to work?
Yes pretty much all HID and LED has a ballast. With the HID it’s better to have a harness that connect to the battery, if not some cheap kits one might be on and another no. Then you have to turn off and on few times before both comes on.
I drive a 2018 Forester. Are these lights Subaru approved? I would like better lighting I just don't want to install lights that will burn the protective plastic or wiring.
Do you guys do installation of the headlights. Its rough being old and disabled
great vid, excellent camera angles, focused on job.
Thank you for the positive feedback!
Does precision have any solutions for DRL?
Are these LED's better than the HID XT model headlights? Those damn HID bulbs are crazy expensive.
How well do these hold up with off-roading ? Dirt, dust, mud and deepish water crossings? My concern is the cooling fans and the ballasts looked like they were vented. Thanks.
just want to confirm, this product will work with a 2013 US forester? also you still get high and low beam correct?
Just a question I have a 2017 Forester and I have halogen headlights can I just replace the bulbs and it'll still work? Or do I have to switch out the entire headlight unit with a projector?
All of our kits are simple plug-and-play, you would just install our LED headlights using the instructions in the video!
What is the difference between the Cree and the Kepler?
Can you use this in a stock halogen housing,it won't be blinding to other drivers
Yes, the headlight conversion is designed for the stock halogen housing.
Also, there are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K or 8000K lights on the road because they are more natural to the human eye.
I've just installed these and have had two drivers in total flash me so far. We were also on a hill (either I was going down and then up or vice versa). Do not stare directly at it, it is BRIIIIGHT
My 2014 Forester has a built in HID for low beam, I'm not satisfied with it. is there a possibility that it can be changed to LED? Thanks!
Unfortunately, you are not able to swap your stock HID to aftermarket LED as the products are incompatible. The ballast and bulb fitments are entirely different. It would entail swapping out your entire housing and stock wiring, which we do not recommend.
Great video. I would like to order these, but my only concern is that this blind oncoming traffic. They look VERY bright. Will the Auto feature still work to turn lights on when it gets darker?
Yes, the auto feature will work exactly as it does with your halogens.
Also, there are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K lights on the road because they are more natural to the human eye.
Ok, I have a base model 2014 Forester as my winter car. I am in canada, is the link above the exact ones used in the video? So, just to be clear, you think if I order the ones in the video, they won't be distracting to oncoming drivers?
Yes, the product linked in the description is the exact same as installed in the video.
There are many factors and many upgrades to headlight housings over the years that help mitigate any glare to oncoming drivers. It is more or less the color of the light which causes distraction and not the actual brightness intensity itself. If you notice, the most distracting lights to see on the road are the blue HID lights which cause a lot of glare for the human eye, whereas you probably never noticed the 6000K lights on the road because they are more natural to the human eye. For this reason, we only carry the 6000K color for headlight bulbs.
Best led lights always put them on all my cars
Thank you so much for the support, we really appreciate it!
I'm interested in upgrading my Subaru headlights but noticed the disclaimer on your website that these are illegal. Can you shed some light, no pun intended.
Do you have a similar application for the Forester fog lights?
2014 Forester Premium - for the high-beams you suggest a 9005 LED. Since the highs and DRL are controlled by the same bulb - how does the LED adapt as a DRL?
There would not be any issues when installing the 9005 kit on your highs, as it would also upgrade your DRLs. The kit will work for both your highs and DRLs without any problems, as our LEDs are designed to dim once your DRLs ignite.
How much will parts O'Reilly said that they don't have them nice video thanks
Thanks! Please check out the links in the description box for all pricing details.
Hi there! Do you happen to have LEDs to replace the halogen fog lightbulbs for a 2014 Subaru Forester? Thanks!
Yes, here is the correct H11 bulb fitment for your 2014 Forester: www.precisionled.com/premium-h11-21-smd-5730-led.html
Please note, this is for a single LED bulb, and you would have to adjust the quantity to 2.
What bulb did you use for the parking light? Also, what bulb would you suggest to upgrade the trunk bulb in a 2014 Forester? Cheers.
Both the parking light and trunk light would use the same T10 bulb, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
Hi there, i have few questions about this product.
1. Just to make sure, this will work on a 2017 base model 2.5i forester right?
2. Is the pricing of $139.99 for both sides or just one side?
3. Do i need to re-aim the lights after installation? Or are they already set at the correct height?
Thanks
Thank you for your interest. Yes, the kit linked in the description is compatible with your 2017 model. The 139.99 cost is for both sides of the vehicle. No, you do not typically have to adjust the headlight cutoff line after installation. The LEDs would be set to the correct height.
just picked up a 16 forester xt touring. Are these considered as an upgrade from the factory HIDs and are they street legal? I also, wanna get an led high beam replacement.
Unfortunately, you are not able to swap your stock HIDs to aftermarket LEDs, as the products are incompatible. The ballast and bulb fitments are entirely different. It would entail swapping out your entire housing and stock wiring, which we do not recommend.
@@PrecisionLED what about my high beams? Can replace them with a 9005 kit?
Hi! HIDs are usually dual beam so unfortunately you would not be able to install LED high beams.
@@PrecisionLED my car has HID headlights but halogen drl/highbeams
@@miGz325 In that case yes, the 9005 kit would be the correct fitment for your vehicle!
Hey guys - do you have any videos on how to swap the stock Parker lights for LED lights on a 2016 Forester? Cheers
We do not have an installation video specifically for the 2016, but it would be the same installation process as shown in this video. The parking light would use a T10 bulb, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
Compatible with 2008 Subaru Forester?
Yes, that is correct!
That was a great help, thank you
Sorry, a 2012 Forrester headlight has a dust cover which does not allow anything larger than a H11 bulb to fit. I know this because I have a 2012 Subaru Forrester
My bulbs no where to be located, i have the steering responsive light. Does anyone know how to change the headlight bulbs? 16 forester xt premium australian
Does led have to be vertical or horizontal or doesn't matter?
Thank you for your interest. No, it does not matter in this vehicle's case, as the housing is designed to shine line evenly onto the road. Also, our LED bulbs come with a great even light pattern. Regardless, you should only be able to install the bulb into the housing in a single orientation.
Question... what about the high beam headlight led bulbs? Is not necessary since are installed the low beams LED’s?
You can install on your highs if you like. We just found that to be less popular, as not many people use their high beams out here in California. If you would like to install on your highs, you would use this kit: www.precisionled.com/premium-9005-cree-led-headlights.html
Do they not make a kit that changes the whole unit? Clear plastic and all?
No, we do not sell any portion of the housing. We only sell LED conversion kits from halogen bulbs to LED.
Do you by any chance have any info about 2013 Forester DRL/High Beam LED swaps? I've been reading online that I would need to disconnect the DRL resistor, but I can't locate it. All the info I've found online have only been for 2014 models and newer or 2012 and older, but absolutely nothing on 2013. Any suggestions would help. Thanks in advance!
For the high beam swap you would install this kit:
www.precisionled.com/shop-by-led/headlight-leds/9005-led.html
Our products call for a simple plug-and-play installation, so you would not need to do anything other than follow the instructions in the video above.
There would not be any issues when installing the 9005 kit on your highs, as it would also upgrade your DRLs. The kit will work for both your highs and DRLs without any problems, as our LEDs are designed to dim once your DRLs ignite.
Can you do a video for a 2011 Subaru Legacy led change over ?
You can find our Legacy LED installation here: th-cam.com/video/IuEn1-VZw3M/w-d-xo.html
The headlight installation would be identical to as shown in this Forester installation video.
Do you have a kit for 2007 accord se 4 cylinder just license plate bulbs because my license plate bulbs burned out.
Thank you for your interest. You can find the proper LED for your license plate here: www.precisionled.com/t10-5smd-leds.html
Please note, you would have to up the quantity to 2.
Does the kit change the high beams to led as well?
No, the installation shown is for the low beams only. If you would like to install on your highs, you would use this kit: www.precisionled.com/premium-9005-cree-led-headlights.html
@@PrecisionLED Awesome, and this kit listed is high beams only correct?
Yes! The link is just for the high beams.
Does the courtesy light come with this kit or was it extra?
You would have to add the courtesy T10 bulb to your cart separately, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
i bought your led upgrades interior for my 2003 forester. is there a video for it?
Although we do not have a video specifically for your 2003, the installation process should be very similar, if not identical to the video here.
I would've put the zip tie first, then the sticky pad.
2019 Foresters have a sealed headlight. You can't replace the bulb, you have to replace the whole headlight assembly.
Hi! This video is specifically for the 4th generation, years 2012-2019. You may be referring to a 2020+ headlight assembly, which we have no had a chance to work with yet.
Do you have 2017 Subaru Forester 2.5 Turing LED?
Thank you for your interest. Yes, we do carry a kit for the 2017 Subaru Forester low beams, which you can find here: www.precisionled.com/premium-h11-cree-hl-gl-headlight-led.html
Please note, this kit is only compatible with your vehicle if your vehicle comes with stock halogens, and NOT stock HIDs.
do you have the fog light conversion for the Forrester
Yes, you can find the fog light conversion kit for the 2012+ Forrester here: www.precisionled.com/shop-by-bulb/exterior-leds/9006-led.html
2018 would be similar too?
Yes! Your 4th gen 2018 is compatible with this installation process.
@@PrecisionLED thank You sir.
Where can I find the led for the parking light?
The parking light would use a T10 bulb, which you can find here: www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
I was told that the headlight housing designed for Halogen does not properly reflect LED lights, as the direction(s) of emission are quite different. Also that if/when changing bulbs like this, one needs to monitor and possible adjust the aim of the headlights. Else they may well be shining above recommended heights, and this all is why they are not deemed legal for DIY changes.
This is how you blind other people. LED bulbs in a reflector housing is such a dick move. You can even see a PERFECT example in the shot where he has one halogen bulb installed and one LED. The halogen isn't directed into the camera on the right of the frame, but the LED on the left of the frame is not a focused beam and some of the light is directed at the camera. Get projector housings or don't do LED.
Much better
Thanks for watching!
Please show in you videos wall where the lights fall
Thank you for the suggestion. We will keep this in mind for future shoots.
Subaru’s original headlights are so darn difficult to remove
It is actually not very difficult, as you can see in the video you only have to pop the hood to access the lights.
Whats the diference between CREE and Kepler ?
Here is a video that details the key differences: th-cam.com/video/GiXBQ2wes6k/w-d-xo.html
What is the bulb for the courtesy light? What number is it? Thanks
We do have listed that the courtesy light would be a 31mm fitment.