Great vid!!.. and wat people dont realise is... its rwd based anyway so it doesnt affect ANYTHING! After 40mph the power goes all to the rear wheels anyway 🤷♂️... you are literally just cutting off the front wheels.
Just stating from experience. It will fuck the car up. The system continues to try to engage even without the fuse it does not fully disengage 100%. It is still a computer system so it does still try to check itself. You will start snapping front axles left and right. Have fun. Don't say I didn't warn you.
What do you do about the assisted traction control management that still exists in the rear. Even after you turn off traction control. I have done this but the car still drops rpms when you spin the tires.
@kingsmotorsports3781 no it doesnt i have done it. The traction control wontnlet you spin the tires longer than 3 seconds Let me rephrase that into a question...are you working with a manual or auto.
Theirs 2 fuses the first one in the bay do it while ur cars off n then turn it on without the fuse and then put it in neutral and take the fuse out from under the steering wheel
@@kingsmotorsports3781 I tried this when I first got my car but I remember removing two fuses and watching a video that told me to do so and my shifter locked up and I couldn’t get the car into drive imma try this tomorrow, is there any negative side effects stress on the front axles/differential etc
Yeah but awd is better imo I’ve owned both and I can tell you this ppl sleep on awd. Technically it is. Rwd after 40mph on the Highway it has that intelligence awd system which is pretty dope
Yea you're right ppl def sleep on awd but they both have their pros n cons, rwd has less drivetrain loss and is a little lighter but doesn't have the grip and traction of awd
Yes turn vdc off and you have to floor it and have the wheel turned. If you floor it at say 20mph not much will happen other than some slip bc I believe esp still stays on
What i dont like is that he says theres nothing wrong with doing it but literally comments that if you leave it off for a long period it will fuck up the car so theoretically you only do it for whatever reason you gonn do it
They're 2 completely different things, removing the fuse will disengage the awd, it doesn't remove any parts. If u want it to be rwd all the time then u would have to swap out all the awd components or buy another g37
@@v36glo pretty sure tho that you could also just pull the stop lamp fuse (by drivers side on the left of where the brake/clutch pedal is) but that will also stop ur brakes lights from working so proceed with caution and at ur own risk
hey man i did this messing around trying to do a burnout and when i put the fuse back in the lights went off but when i started driving the car felt like it was slipping until i got to about 20 mph then my AWD light started flashing? any ideas why? or what to do
@@kingsmotorsports3781 nah man what happen was i put 20s on the rear to try and burn them off i thought it’d be fine just for a day and the car said no sir. sounds pretty dumb but i didn’t think it would cause all that 😂💀
i pulled just the ets sol fuse on my 2010 g37x cuz i just wanted to drift (don’t really care for burnouts) but yeah i pulled the fuse and it worked great, my only questions and concern is that does it matter how often i pull the fuse as long as i put it back every time?
@@kingsmotorsports3781 like what kind of problems? The axles have been taken apart and only the axle ends are left in the front diff along with the ends in the hubs. No issues so far but I’ve only put about 100 miles on the car since it was done
You pulled the wrong fuse, just put it back in and restart the car and drive for a little bit or put the fuse in the disconnect the battery and reconnect after 5min
Yes your destroying the rear dif bushing from spinning your tires. It's an awd g trust if you do this you are destroying the tranny. The awd tranny is already weak I own I know. Doing this will ensure you finish off your tranny a lot sooner then you expect. Anyways to each their own do this at your own risk of blowing up your rear diff and tranny I'll be ready to take your block
The transmission is the same whether it's AWD or RWD the only difference is the addition of a transfer case, front diff and axles to drive the front wheels. This is only meant to be done once in a while and for a very short period of time.
I done this and had a fun night on snow then I pluged it back. The next day my front diff exploded when I driving it normally. DO it with your own risk.
There’s two fuses not just one The second fuse he didn’t talk about in that fuse Controls the brakes for the front so if he wants to tap the brakes too hard it also be on the front differential
Great vid!!.. and wat people dont realise is... its rwd based anyway so it doesnt affect ANYTHING! After 40mph the power goes all to the rear wheels anyway 🤷♂️... you are literally just cutting off the front wheels.
Yea bro its a great little trick and alot of ppl dont understand and think it hurts the transmission or awd system lol
It’s after 15 mph that it goes to rwd, unless you need the extra traction. If it’s in snow mode it will wait until 25 mph
Just stating from experience. It will fuck the car up. The system continues to try to engage even without the fuse it does not fully disengage 100%. It is still a computer system so it does still try to check itself. You will start snapping front axles left and right. Have fun. Don't say I didn't warn you.
Facts, this is not for long term use, it's only if u want to do a quick burnout, donut or dyno run.
@@kingsmotorsports3781 so if I take it out for an hour to do donuts and put it pack after it damages it?
Depends how many donuts and how hard u push the car but technically it should be fine
@@kingsmotorsports3781 okay how much do u recommend I do this because it’s fun so I want to do it a lot 😭 unless it’s ruining my car of course
@@elite8565id recommend really just for the one time😭 :)
Great info 👍🏼 super easy
Why not just split the wire on the power side of the fuse and run a toggle switch into the car so you dont have to go through that process everytime
That also works but I don't do it enough to warrant adding a switch
Yo that’d be a great idea
@@kingsmotorsports3781can that affect the car switching it so many times
@@yochr1sz198YES
@@yochr1sz198these infinities are strong cars b lol
What do you do about the assisted traction control management that still exists in the rear. Even after you turn off traction control. I have done this but the car still drops rpms when you spin the tires.
After removing the fuse all of the traction control turns off
@kingsmotorsports3781 no it doesnt i have done it. The traction control wontnlet you spin the tires longer than 3 seconds
Let me rephrase that into a question...are you working with a manual or auto.
@@plimmeljighave you have to remove 2 Fuses. the traction fuse is located in the car to the left of ur parking break.
Theirs 2 fuses the first one in the bay do it while ur cars off n then turn it on without the fuse and then put it in neutral and take the fuse out from under the steering wheel
Hey bro how much did you spend on the supercharger set up after install?
Did you upgrade engine internals for the supercharger?
Nope still stock motor
👍🏼👍🏼I’ll try this tonight
Lol have fun, lmk what u think tom
@@kingsmotorsports3781 I tried this when I first got my car but I remember removing two fuses and watching a video that told me to do so and my shifter locked up and I couldn’t get the car into drive imma try this tomorrow, is there any negative side effects stress on the front axles/differential etc
@@christians8114 if its a g37x then its only that one fuse and no there's not
@@kingsmotorsports3781 i have a 2012 g37xs, this should work with no problems right?
I did what he did in the video and now I’m getting a speed sensor code with rough shifts and can’t get past 3rd gear 😢
Where did you get that front splitter from?
why does the gas cut out when I try to do a burnout (vdc off)
Did u pull the right fuse?
Stop brake light fuse. Google search it
Yeah but awd is better imo I’ve owned both and I can tell you this ppl sleep on awd. Technically it is. Rwd after 40mph on the Highway it has that intelligence awd system which is pretty dope
Yea you're right ppl def sleep on awd but they both have their pros n cons, rwd has less drivetrain loss and is a little lighter but doesn't have the grip and traction of awd
can i drift my car even with the awd still turned on? cuz theoretically it would just help me straight out after i initiate the drift wouldn’t it?
straighten*
Yes turn vdc off and you have to floor it and have the wheel turned. If you floor it at say 20mph not much will happen other than some slip bc I believe esp still stays on
Only if the car has alot of power to stay in drift otherwise maybe in the snow or rain but dry pavement I doubt it
Trying to tune my g37x would I be able to take the fuse off just for a tune and out it back on ?
Yes
So if I take this fuse off does this mean I can run a staggered wheel set up on my g37X without an issue?
Theoretically it won't upset the awd system bc it will be turned off but that means u will always need to have it off
@@kingsmotorsports3781 will removing the fuse mess up your transmission?
If u do it for long periods of time it will mess up the front differential
@@kingsmotorsports3781 how long is a long period of time ?? Can I keep it out for 2 months? Or a month
Is there any downfall? Main reason i want to pull my fuse is to drift. Will this cause any major damage besides what drifting already does to car
No it will not, the only downfall is turns off the vdc system but either way u don't use it in drifting
do not do this he did this to run the dyno its going to burn out your fwd clutch and will fry it
@@afshawnemran4376 how??
@@afshawnemran4376 link to some proof of this?
What i dont like is that he says theres nothing wrong with doing it but literally comments that if you leave it off for a long period it will fuck up the car so theoretically you only do it for whatever reason you gonn do it
can it be done in bmw 2 series xdrive😢
Not sure bmw ecu are touchy it might throw u into limp mode
Whats da different ? Did you recommend no awd ?
i just do this to rip donuts lmao but just for driving i keep it in awd
it is necessary to set it to N before removing the fuse or just adjust P and remove the fuse?🔥🔥
Yes car has to be off as well
Would I be able to swap my car to a manual transmission if I keep it rwd by removing the chip?
Doubt it our drivetrains are different and besides you’d save money selling it and just paying a bit more for a manual
They're 2 completely different things, removing the fuse will disengage the awd, it doesn't remove any parts. If u want it to be rwd all the time then u would have to swap out all the awd components or buy another g37
I pulled the ets fuse but whenever I try do a burnout it only revs to like 2000rpms... what's the fix? (VDC and tc are turned off)
Same bro what’s the fix??
@@v36glo fix for me was plugging the fuse back in and instead wiring a switch into the AWD module harness... took maybe 15 minutes all together
@@v36glo pretty sure tho that you could also just pull the stop lamp fuse (by drivers side on the left of where the brake/clutch pedal is) but that will also stop ur brakes lights from working so proceed with caution and at ur own risk
@@mustafagak2852 what fuse did u put back in I’m a little confusef
@@mustafagak2852 I pulled out both and it put my G in limp mode
hey man i did this messing around trying to do a burnout and when i put the fuse back in the lights went off but when i started driving the car felt like it was slipping until i got to about 20 mph then my AWD light started flashing? any ideas why? or what to do
Does it still do it? That shouldn't happen especially if u take it out n put it back in right after
@@kingsmotorsports3781 nah man what happen was i put 20s on the rear to try and burn them off i thought it’d be fine just for a day and the car said no sir. sounds pretty dumb but i didn’t think it would cause all that 😂💀
@@griddyyyyyy it happened to mine it means the front or rear wheels are slightly smaller I got bigger tires and it went away
Lmao ohhh yea wheel size can't be different from front to back or the awd system will bug out
i pulled just the ets sol fuse on my 2010 g37x cuz i just wanted to drift (don’t really care for burnouts)
but yeah i pulled the fuse and it worked great, my only questions and concern is that does it matter how often i pull the fuse as long as i put it back every time?
Awesome bro 💪 just don't do that for long periods of time or it might mess up the front diff
@@kingsmotorsports3781 i thought the front dif was just not working while i had the fuse pulled?
Will it still slide decently even with the diff being open. If not are rear lsd's available for awd models?
Just weld it
Did u pull the stoplamp fuse
Is it possible to hook up a separate toggle switch to illuminate taking out the fuse like a Killswitch
It should be possible if u get some kind of switch on a relay
the car comes with a fuse puller too
Yea but I like to keep it where it is so I don't loose it
Can I remove it and just leave it it off for ever?
No it will mess up your front diff
Will this work on a m35x?🤔
Yes just don't do it for long periods of time
I need to know how to make my rwd to Awd I live where it snows
Better off selling urs and just buying an awd g
What if I do this and completely remove my front axles? Would I be fine to do this permanently then?
Taking out the front axles will just create more problems for u with the front diff, I don't recommend it.
@@kingsmotorsports3781 like what kind of problems? The axles have been taken apart and only the axle ends are left in the front diff along with the ends in the hubs. No issues so far but I’ve only put about 100 miles on the car since it was done
@@solowgarage751how about now ? any issues yet ?
Yooo.. Where can I get those headlights
Hit up @kings_customworkz on ig
Aye bro what tire setup u running
275 35 19 all around
When you put the fuse back in and it goes back to awd does it mess anything up?
Nope goes back to how it was before u took it out
once you put the fuse back in will it go back to awd?
Yes watch the video before u do it
Hey where the headlights from super clean
Thanks man, we make those custom in-house. Check out our ig kings_customzworks 🙏
Do you have stock transmission or built?, also how much psi are you at I wanna go boost but not sure if it’s reliable
This is a stock vr30 transmission out of a q50, I'm running around 15-16 pounds of boost right now. I highly recommend it if u can swing it
Is it worth it? You still have the weight of the diff
Yea its worth it if u wanna do burnouts and donuts. This mod is not for saving weight its just to have fun with ur car
It didn’t work for me. I have a 2012 G37xS coupe any suggestions?
Did the awd light go on the dash when u took it out? If not then u pulled the wrong fuse
Do u think it’s safe to weld my diff on my awd q50 so I can do donuts with fuse pulled ?
You dont need a welded diff to do donuts but yea u can weld the rear diff if u want
@@kingsmotorsports3781 so u sayin my awd q will swing like a normal rwd with fuse pulled and open diff
Does this work on a 2008 g35x
Yes
I did this and did a half donut and my car only move on Neutral now reverse and drive it don’t move at all need some help brothas
😂😂😂
How many miles on the car?
@@kingsmotorsports3781 it has 180k miles I still haven’t got it fixed and I noticed that when I rev it on park it doesn’t go past 3000 rpms
It never does go above 3-4k while in park and that's alot of miles, trans might've been on its way out already
@@kingsmotorsports3781 it was the transmission about to try it again just got my car back haha
Quick question so do you put the fuses back on after getting a tune ? Did you just remove them to get tuned?
Yes remove just for the dyno
Can i leave it permanently off?
No I wouldn't do that
Does the car feel slower once pulled fuse? (Stock)
No, might actually feel faster
will it mess up the transmission or is there any consequences
No it doesn't mess up anything 👍
yes it does its only meant for dyno runs on rwd which is what most tuners do but it will burn out the clutch if you continue to do it
@@afshawnemran4376 what clutch lol I own one and nothing happens
Only my AWD light came on is that normal or
Yes, after u take out the fuse the light will come on
I pulled the fuse and got a speed sensor code and can only goes to 3rd gear
You pulled the wrong fuse, just put it back in and restart the car and drive for a little bit or put the fuse in the disconnect the battery and reconnect after 5min
@@kingsmotorsports3781 didnt work getting a new speed sensor for it
How do you tell if the front dif is messed up from doing it too much? I'm looking into buying one but the guy says hes been running it like this
Buying what, a g37? You'll hear noise coming from the front and if it fully breaks it won't engage awd and u should get some kind light on the dash
what headlights are those bro?
Custom headlights done by us
Is it safe?
Yes
Do i have to turn on the traction control off too or just pull the fuse ?
It might turn it off for u when u pull the fuse if not turn it off if u want to do donuts or burnouts or drift etc.
why would you wanna do this ? just asking
This allows u to do burnouts, donuts, slide the car
Which fuse
Does this hurt the vehicle
If done for long periods of time then yes, it will hurt the front diff
Let me make it easy for you, yes you car will need to be fixed if you do this on a normal (every once and a while will still do damage
@@ryandesko4607 let’s say once a week most
So there won’t be any consequences from this?
Not if u take it out then put it back after ur done doing ur hoonigan shit. Can't leave it out forever or it can mess up front diff
Yes your destroying the rear dif bushing from spinning your tires. It's an awd g trust if you do this you are destroying the tranny. The awd tranny is already weak I own I know. Doing this will ensure you finish off your tranny a lot sooner then you expect. Anyways to each their own do this at your own risk of blowing up your rear diff and tranny I'll be ready to take your block
The transmission is the same whether it's AWD or RWD the only difference is the addition of a transfer case, front diff and axles to drive the front wheels. This is only meant to be done once in a while and for a very short period of time.
Any tune shop in ny?? Do you know anyone?
Hit up AdminTuning @adminnycdyno tell them we sent you
I done this and had a fun night on snow then I pluged it back. The next day my front diff exploded when I driving it normally. DO it with your own risk.
Still don't understand why it will mess up the front diff
There’s two fuses not just one The second fuse he didn’t talk about in that fuse Controls the brakes for the front so if he wants to tap the brakes too hard it also be on the front differential
Hard to understand what u wrote, there's no need to take out any more fuses especially the fuse for the brakes
Update: found out the left front cv axle is broke. Front diff is ok
@@kingsmotorsports3781why do most other videos say to take the break light fuse out
Hey , are you from buffalo NY ?
Sorry man we're from NYC
would this also work in the g35x
Yes
Will this damage anything
It will if u do it too often