This works ! I’ve done it on a EX35, if you want to do a burn out you have to also remove the brake lamp fuse that’s inside of the car. Car won’t let you brake and floor it at the same time with it in
Hi Ed I hope you do get to see this- There is a 15A INJ fuse beside the 10A ETS fuse in the fuse box at the battery compartment. What does the INJ fuse do? My RWD Base M37 comes without those fuses. Can I put the 15A INJ and the 10A ETS fuse? Will putting the INJ fuse have an impact on the fuel trim?
This was part of a different video I uploaded earlier. Go to the 23:00 mark of this video and you'll see it in action th-cam.com/video/JfvSjkAJoWE/w-d-xo.html
CAn COmone plzzzz confirm if I do that and later when i install the fuse back again, will the Warning light disappear itself without needing a dealership or OBD. somone plzz comfirmmmmm
Do you just plug the fuse back in? Also how to turn off the traction control completely, not just the vdc. Turning off vdc doesn’t really do much, it still bogs down for me when traction control kicks in.
Yep, as simple as that for the AWD. For the VDC, people usually put in a switch online with the wire that goes to the yaw sensor (under the center console). For temporary fun, you can also unplug the brake switch, but make sure your car is in gear already.
@@Ocky313 try fuse #45 in the IPDM. Also, check #11 in the fusebox located in the driver kick panel. They are both 10A fuses. What I usually do is just replace them rather than a plain visual check.
I mean, you might find that it takes a little longer to stabilize upon take off, but if you don't mind the lights in the gauge cluster, you could try it
The front axles only turn if the wheels turn. Think of it like front (or rear) drive wheels with the transmission in neutral. The axles might turn but they are not driving the wheels, they are just along for the ride.
Nissan did develop ATTESTA For the R32 gtr so they're more than capable making a comprehensive AWD drivetrain but in the crossover market open diffs are sufficient.
This works ! I’ve done it on a EX35, if you want to do a burn out you have to also remove the brake lamp fuse that’s inside of the car. Car won’t let you brake and floor it at the same time with it in
Is that also located in the fuse box?
this is a great video, love the editing!
Love your content.
Thank you!
I removed fuse and put switch and now i can switch from AWD to RWD.
update this worked in 2016 qx50 spinnin when its dry now 😳
Bro I been tryna do this to my car I got the exact one I’m finna go turn up
Hi Ed I hope you do get to see this- There is a 15A INJ fuse beside the 10A ETS fuse in the fuse box at the battery compartment. What does the INJ fuse do? My RWD Base M37 comes without those fuses. Can I put the 15A INJ and the 10A ETS fuse? Will putting the INJ fuse have an impact on the fuel trim?
Wish you would have shown us the process of it going back to AWD
This was part of a different video I uploaded earlier. Go to the 23:00 mark of this video and you'll see it in action th-cam.com/video/JfvSjkAJoWE/w-d-xo.html
Thanks for the information. Are you able to do this on the Q70 all wheel drive and M56x M37x?
Did it to my m37x and had a little fun. Don’t know if there will be any damage but it does like to swing. Do it at your own risk I guess
Yes indeed. It is the same for the sedans
@@EdBwoy well there be damage to the front axles? Thinking of doing it on my g37
When you pull the fuse, the front driveshaft and axles will just turn as if you're coasting in neutral, but they won't be powered
@@Kholmes97 forums.nicoclub.com/06-m35x-drive-without-front-propeller-shaft-connected-t624865.html
Why your engine sounds like a diesel?
i have jeep meridian can i try on that?any damage in this process??
CAn COmone plzzzz confirm if I do that and later when i install the fuse back again, will the Warning light disappear itself without needing a dealership or OBD. somone plzz comfirmmmmm
i don't have an ETS fuse on mine what do i do in this case?
Hi i have problem 4wd Wer surcharg problem after drift
Do you just plug the fuse back in?
Also how to turn off the traction control completely, not just the vdc. Turning off vdc doesn’t really do much, it still bogs down for me when traction control kicks in.
Yep, as simple as that for the AWD.
For the VDC, people usually put in a switch online with the wire that goes to the yaw sensor (under the center console).
For temporary fun, you can also unplug the brake switch, but make sure your car is in gear already.
How do i get my fx50 back to normal? After playing around in RWD the fuses are back in place and the AWD light and IBA off lights still are on.
I have to ask, have you turned the car off and back on?
@@EdBwoy yes its been weeks since i switched it to awd
Hang tight. There are 2 other fuses you could check
@@Ocky313 try fuse #45 in the IPDM. Also, check #11 in the fusebox located in the driver kick panel. They are both 10A fuses.
What I usually do is just replace them rather than a plain visual check.
@@Ocky313 as a matter of fact, replace the ETS fuse as well and start troubleshooting there.
Any damage? How easy is it to revert back to awd
No damage from that. To go back to AWD, just plug it back in
Thanks Bro. But if i dont have snow button in my QX and then ? its mean that my car doesn't have lock awd ?
qx is built off of the same chassis as a pathfinder, they are based out of front wheel drive so it probably won't work
It's not a lock AWD, it just delays the switch from AWD to rear bias when pulling away
If I did this in a M45X and drive it daily would it cause problems?
No, it should not.
I mean, you might find that it takes a little longer to stabilize upon take off, but if you don't mind the lights in the gauge cluster, you could try it
Does it always show an error after that?
it almost always will. missing fuses are normally huge dangers to the car.
I have a button on mine to disactivate awd
which car??
How you not get more thumbs up, must be a lot of mechanics mad 😡 🤣🤣🤣🤣
do the front drive axles spin still or are they stopped
The front axles only turn if the wheels turn.
Think of it like front (or rear) drive wheels with the transmission in neutral. The axles might turn but they are not driving the wheels, they are just along for the ride.
Ha ima start drifting
I have learned one thing from this video. Infiniti/Nissan AWD is garbage. From an Acura owner. SH-AWD is the way to go
As a M550i owner, xdrive shits on sh awd
@@ToxicCookie you wish buddy
Nissan did develop ATTESTA For the R32 gtr so they're more than capable making a comprehensive AWD drivetrain but in the crossover market open diffs are sufficient.
SH-AWD is amazing, no doubt. If I may ask, what would happen to a SH-AWD-equipped vehicle if you pulled a fuse like this?
@@EdBwoyWhen I say it's garbage I'm talking about the wheels spin before you pulled the fuse out
Will that work for a fx 45