Link to other Know How Now videos about water shut off valves you might find helpful: th-cam.com/play/PLvce66kQTjJRuwqmH0S5Shjfj5HeRdbMr.html There are hundreds of videos at Know How Now, subscribe so you can always find the channel…. It’s free. I always respect your time and do my best to keep the videos brief, but informative. Check out the channel with this link: www.youtube.com/@Know-How-Now/videos
Your instructions were the most clear presentation that I have ever seen about plumbing. Not only did you show what to do with its contingencies, but you explained EXACTLY how to do it. AND you did not have your hands in the way when it came to performing any of the steps. I have watched a lot of plumbing videos about replacing and fixing parts including whole house hook-ups to wells, faucets, toilets, RO systems. They are usually frustrating because they do not include all of the information that you need - usually at the critical point where you need to see how they are inserting new parts. I realize the shut off valve is an easy fix (if you are lucky) and I am going to go straight to your website the next times I have a plumbing repair to do.
Thank you for the compliment. I try to make every video with all of the detail needed and as short as possible. TH-cam and internet search engines do not always reward this behavior and rank the videos at the top of the search page. I have many other home repair videos on the channel which are grouped by topic in the playlists. You can also search the channel's contents by typing in keywords in the search box on the Know How Now channel page. Here's the link the plumbing videos playlist: th-cam.com/play/PLvce66kQTjJTz0cqcI_HDnaLbNLDONCVP.html
Wow, fantastic video! I am a DIYer and watch lots of vids on various topics. Rarely do you see one so well organized, thorough, and clearly explained. Hats off to you on this 5-star vid!
Thanks for the compliment, Dallas. I do spend a lot to time making the videos. I'm having fun making them and I like helping people solve problems. There are now over 200 how to/repair videos on the channel.
@@unbotheredmovement No need to tie things to gender here. Can we simply call something great when it is, and lacking when it's not based on objective measures and leave gender/race/religion out of it? Greatness doesn't discriminate.
@@dallasbiggz7007 I agree, but listening to her gave me the courage to tackle my valve leak. So, if you don't mind, can I shout "Girls Rock" for a lil while longer? Please and thank you! 🤗
I had almost gone through an entire pack of Teflon rope trying to fix these leaks in my valve stems. You were really helpful showing the whole process of closing up the leak by continuing to tighten the packing nut little by little. Being afraid of overtorquing the nut, I wasn't tightening it enough for the leak to stop and had almost resorted to replacing the whole valve. Thanks a bunch.
I'm a licensed electrician but I've been doing property maintenance for the past 6 years. I do everything from carpentry electrical plumbing flooring etc etc pretty much everything. We have over 200 units and there's only me on a service truck. I run into my first packing nut leak today and was just going to replace the valve like I always do, but it would have cost me two or three hours to do so. Thank you for taking the time and your videos on TH-cam it was a huge help and very successful to me. 💯👍
I can't thank you ENOUGH for this well-done, informative video! I had no idea what process was needed to stop the leaking at the shut-off valves behind the washer. But as I watched and listened to your video, it made perfect sense why the leaking was occurring at the faucets. As the comment below mentions, I couldn't find the valve rope ANYWHERE, and I was SO ready to get the leaking fixed. I decided that until I was able to locate and purchase the rope, I would improvise with "MEGATAPE" pipe thread tape. I figured I didn't have anything to lose, and it was worth a try. It was a little difficult because of the cramped space I was working in -- but I eventually got several rounds of tape wrapped around the stem beneath the nut (which I had raised up because of your instructions). I slowly screwed the nut downward, compressing and incorporating the tape into the threads. By the time the nut was seated where it needed to be, the leak had stopped! Obviously this is a temporary fix until I can get my hands on some valve rope, but for now the seal is holding. Thanks again for this wonderful insight into a perplexing problem.
FANTASTIC! I had a leaky valve, exactly the one you showed in the video. I live in NYC where EVERYTHING is expensive. Over the phone, all the plumbers I called quoted me over 100 bucks and some said I would probably have to have them replace the whole valve. They said that once it leaks from the stem, you need a new valve sweated into the copper pipes. That wold cost a few hundred dollars. I've changed washers and seats for many years but never knew how to stop the leaking around the shaft. After all the crazy estimates, I just said no. There MUST be a way to fix this myself. SO, I found your video and VOILA! I did the job and changed the washer while I was at it and it is PERFECT. Good thing you mentioned the sweet spot. YOU SAVED ME MONEY ! ! ! GOD BLESS YOU ! ! !.
Thanks for taking the time to comment about your experience, Tony..... way to go on using common sense and finding a solution to the problem! The channel has over 200 how to/repair videos that are organized by playlist. You can find them by clicking on the channel name. Many people have subscribed to the channel, its free, and you will easily be able to find all the Know How Now videos.
I appreciate that you made sure to explain things thoroughly. I don't know the exact terms and what things are called and you explained it all so it's easy to understand. Thank you!
I've never commented on a youtube video before, but this video deserved it. Thank you so much for saving me a lot of unnecessay work changing out the cutoff valve. Which is exactly what I was about to do before stumblng upon this video. Your video was informative and very well detailed.
You are welcome. It's my pleasure to help. Thank you for watching the video and taking the time to comment. If you haven't already done so, click on the channel name and check out the rest of the videos on the channel.
Wow! You saved me one plumber trip today! You gave such explanation in detail, and could follow it to the teeth. My leak stopped! God bless you and you may continue to use your expertise for many out there. Thank you again!!!
After a handful of videos, I finally came across this one. Very informative, great lighting, good up close camera angles, clear audio, steady camera, etc. Thank you for making this video. Much appreciated.
You are welcome. Thank you for taking the time to comment and show your appreciation. I strive to make accurate and informative videos. Please consider supporting the channel and subscribe. It's free and it will allow me to continue to make more videos.
@@Know-How-Now Very helpful video. It's extremely frustrating when someone feels the need to add music & try to be funny. You kept your video short, easy to understand with clear instructions & good lighting.
Thanks for the compliment. I am always trying to improve the videos. This one was one of the earlier vintage. There are now over 200 how to/repair videos on the channel. I am having fun making them and it's nice to hear that people are finding them helpful. Have a great day.
Agree. There are too many poorly quality videos on TH-cam. It is so nice when a creator takes the time to produce a clear, understandable, high quality video.
ditto that! Great production values, wonderful audio. Poorly made videos make simple things like this difficult to do, and yours makes a simpler (but new to me) fix even easier. Kudos.
I watched a few videos before this one, and yours was by far the best. I just repaired my washing machine valve stem leak, and I have a few tips to add. 1 The big box crews may not know what packing rope is. Check online to make sure they have some. I went to one that didn't. I went to another that did. 2. Make sure that you get the nut threaded back on securely before you turn the water back on. I thought I had it, but no I didn't. Took another trip to the water shutoff. I should have gotten the smaller packing rope. You need a few nut threads exposed to catch hold of the valve threads. 3. The old packing in my nut was compressed to the point of being like a gooey concrete. It was difficult and time consuming to remove. Think about how the packing works. It has to be a bit squishy to close the gap around the stem. If there's no squish left, the gap won't close. If it's leaked before and been tightened to the max, you will have to clean it out.
I was wondering if the old packing material had to be removed, I have 2 of these gate valves that are 46 yrs old, they have leaked before when shut off, I would like to fix them so they don't leak the next time I shut them off when I replace the washing machine with a new one.
This worked! Thank you so much. Saved me over a hundred dollars not to call a plumber. You show how easy it is to repack the valve, which I didn't realize I could do at all. I inadvertently closed my browser window and lost your video. When I searched for "repair straight stop valve" again, it took me about ten minutes of looking through other, less helpful videos until I found it again. Once I had your video back up it took less than ten minutes to fix!
You are welcome, Daniel. Way to go on saving yourself some money! There are now over 200 how to/repair videos, organized by playlist, on the channel. I am always trying to improve the quality of the videos. If you subscribe to the channel, you will easily be able to find the videos.
I watched several videos and yours was the simplest and clearest. During the repair process (I used packing material) the shutoff handle broke. Went to my hardware store, got the handle replacement and put it on, and everything is working fine and no leaks. Doing laundry now. Thank you very much!
An angel. My house shutoff valve was spraying water and I had visions of having to replace the valve. After watching the video, I tighten the bonnet nut and problem solved. This was a clear and precise presentation. Hugs your way. Thanks.
A+++ Video! When 2 different plumbers came by the house to inform me that this was going to be a THOUSANDS of dollars job to replace the entire gate valve AND the piping to the street supply valve, I thought I’d check UTube in desperation, to see if I could find a solution. This video gave me extremely clear and concise info on repairing this gate valve!!! Everything worked as instructed, and it worked as stated! Thanks for taking the time to put such a great video together 👍🏼👍🏼👍🏼
You are welcome, Harold. Sorry to hear you had two bad plumber encounters. As the saying goes knowledge is power. Congratulations on the successful repair.
I just fixed two toilet valves using your video. I knew what to do, but it had been more than 20 years since I last had leaking toilet valves. I did a quick Google search to confirm what I remembered or fill in any blanks in my knowledge. I was right, it turned out, but until I watched your video I was afraid to do the work. Thanks very much for this.
Thank you so much for this tutorial. I just repkaced my hot water heater and this exact thing happened to me with my stop valve. I was just getting ready to go to the hardware store then stopped and watched this first. The tightening tip on the bonnet totally worked. Much appreciated.
You are welcome. There are hundreds of home repair videos on the channel which are in playlists by category and you can search the channel page with keywords. Please subscribe, it's free.
A very nice and helpful video. It gave me the confidence I needed to do the job. It saved me time, potential water damage AND a lot of money. Blessings to you!
Great video -Right to the point with no nonsense banter. My sink water valves leaked after I closed them and reopened them after replacement of a faucet. I closed the valve, took of the handle and slid off the packing nut. Inside was plastic and junk. After cleaning that mess out. I used Nitrile O-Rings from Harbor Freight and slide two down the valve stem. Tightened the packing nut and re-installed the valve Handle. The problem was that indeed the packing washer or whatever was used had failed. The O-Rings compressed and stopped the leak. Thanks for the informative videos.
Thanks for the compliments and for taking the time to write about the details of how you repaired your valve. It will be helpful to others who have the same type of valve. Great idea to use O-Rings.
After watching a bunch of videos, yours was the only one that was easy to understand and worked! Thanks for posting! Now if I only can get my hot water heater up and running again, ugh ! Cheers
Thanks for the compliment. I try to make the videos as short as possible, but still include the information that you need. Good luck with the hot water heater!
Thank you so much!!! I had to turn off my tub's hot water and cold water feeds to replace an old faucet handle and back plane (escutcheon) and when I went back to open the shut off valves after, the hot water one started dripping! Your video's first thing to do, tightening that connection, WORKED! You know your stuff! Thank you, again!
Excellent video! So well explained, I love how you get right to the point and slowly explain the repair without unnecessary banter. I had a leak and didnt want to call anyone. Because of this video, I was able to fix it myself and my shut off valve is no longer leaking! Tightening the nut was enough, and I like the explanation of making sure I didnt tighten it too much....Thank you!
I've been through over a dozen videos looking for a solution for my washing machine shut off valves and this is the only one that even mentioned "tighten the packing nut." Thank you!
You are welcome, Rob. As many others have done, please consider supporting the channel and subscribe. It's free and you will always be able to find over 200 videos on the channel (If you don't want to subscribe, check out the videos by clicking on the channel name). They are organized by playlist.
Thank you very much. I discovered a leaky valve in the basement today (Christmas day of all day!) I was about to call a plumber but then decided to do a quick search on youtube first. I simply tightened the packing nut and NOT MORE DRIPPING.
You are welcome. Thank you for watching the video and taking the time to comment. I am always trying to improve the quality of the videos. There are now over 200 videos on the channel that can be found by clicking on the channel name.
You are welcome, Deborah. Good job on being resourceful and finding a solution for the problem. As many others have done, please consider supporting the channel and subscribe. It's free and you will always be able to find over 200 videos on the channel (If you don't want to subscribe, check out the videos by clicking on the channel name). They are organized by playlist.
I just wanted to say thank you for this video, I almost left for a hardware store to buy another valve because it didn't even occur to me to just tighten up mine. You won a like
Great video. Clear explanation without technical stuff I can't understand. Good to know I don't have to go buy expensive tools. Just what I was looking for. Thanks so much.
This video really helped. All of a sudden my hot water valve for my washing machine started leaking. I bought a new push fitting valve to replace it. Then I tried just tightening the nut and it stopped leaking. Thanks for the help.
Thank you so much for your clear, easy, directions on how to repair a leaky shut off valve. You saved me a lot of time and frustration. I was thinking I had to take the entire value apart and replace washers when, in my case, all I had to do was tighten up the packing nut to stop the leak. Much appreciated !!
This video just made my day! I have had a leaking valve for the last year and a half and all i needed to was tighten the packing nut. Thank you so much!
This video is clear, concise, and saved my bacon from having to call a plumber as I don't know anything about plumbing! Thank you for your simple instructions!
You are welcome, Brandt! As many others have done, please consider supporting the channel and subscribe. It's free and you will always be able to find the almost 200 videos on the channel (If you don't want to subscribe, check out the videos by clicking on the channel name). They are organized by playlist.
I have this issue on my old toilet shut off valve and have never worked on any sort of pipes or vales before, this is very informative! After I go buy some of the supplies I need I will try and fix it up, hopefully it all goes well! Thank you for making such a great video with so much detail!
Wow, what I need to know to feel comfortable with this repair. Thank you for your time sharing your expertise in an empowering manner. Two thumbs WAY UP!
Thanks for the video! I tried tightening the packing nut first, but it still dripped. I then tried the packing rope, tightened down the nut, and now no more dripping. Thanks again!!
You didn't seem to mention to never back off a packing nut if you overturn it. This will possibly cause a leak again, as the material has been compressed and now loosened. It's best to just adjust the nut slowly.
So what you're saying is, if you've overtightened the nut, it's not actually overturned, as it's not currently leaking. I sure wish you guys would keep your incorrect concepts to yourself.
Great tutorial, it was so easy for a beginner like me to follow and understand so good work and please keep sharing and thank you for knowledge sharing. I am now a proud subscriber to this channel!
Thank you for subscribing and the compliment. This was an earlier video, so it's a little rough. I am always trying to improve the quality and content of the videos. Have a great day.
Know How Now Your video sure helped me. Thanks. Saved me a lot of money because the packing rope was only $3.40! It stopped leaking after turning on the water supply!
Thank you! Plumbing is not my thing, but I can tighten a nut. Your video helped me! I was planning on taking tomorrow off of work and spending 8 hours cutting and soldering pipe. It turned out that the nut was loose. Thank you!!
At 2:00, I'd recommend using a second wrench to stabilize the valve housing itself so that when you turn the packing nut, you are not torquing the pipe. That could result in a much bigger, more complicated issue than a leaky valve stem.
I agree, a back up wrench is best practice. As you know, you likely just need to turn that packing nut about 1/4 turn... not very much torque at all. Perhaps I should have mentioned it in the video, but I'd bet most folks watching the video and doing this repair don't have a 2nd wrench anyway.
Thanks for the video and the inspiration to try fixing my valves again. I saw similar videos in the past and have had mixed results... some successful, some only partially successful, but "good enough". After watching your video, I thought I try it again, and now things are good!
Thank you!! I’ve watched many of these, but the confidence finally clicked with yours!! ❤ I successfully fixed mine today and I keep peeking at it and shouting BONE DRY! 😂
one of the best, most complete explanations I've seen. great video, really showed what was going on. thank you, you just saved me $400 in plumbing costs.
Thank you so much for this video. Here I was gonna call a plumber and after I seen this video I was able to do fix it all by myself and it took a heavy weight off my shoulders.
You are welcome, Diana. Way to go on the successful repair. There are over 200 how to/repair videos, organized by playlist on the channel. If find a few spare moments, click on the channel name and explore. Subscribe and you will easily be able to find the channel. Thanks for watching the video and taking the time to comment.
O, that's *UNBELIEVABLE ! ! !* I thought for a long time it's Mission Impossible to fix my dripping tap without an overhaul, *BUT IT'S NOW FIXED BECAUSE OF YOUR VIDEO !!!* *THANK YOU SO MUCH, YOU'RE SUCH A DARLING >3< >3< >3
You are welcome. It's always nice to hear the videos are helpful. As many others have done, please consider subscribing to the channel. It's free and you will easily be able to find over DIY videos.
Thank you so much for this video. It was soo well done. We were able to save $400 because we found this video, your explanation and tips! Thank you once again!
Seen a few videos first as others have also stated in your comments. Yours was the best at explaining things step by step. I have a leaking cold water valve going into my water heater. I tried teflon tape but not rope. Will do this tomorrow. Thank you!
You are welcome, Isabel. It's great to hear the video has helped to solve your problem. There are now over 200 repair/how to videos, organized by playlist, on the channel. If you have a couple of moments, click on the channel name and check it out.
I already did this job, but this would have been helpful. Outdoor spigot was leaking at stem. Got it apart (no easy task) and wasted time trying to find a rubber cone washer. I learned about packing material graphite or TPFE (teflon) types. I used the TPFE type and used larger diameter than the one show here in this video. I only wrapped it 1.5 times. There is no rule but it does come in different diameters. You don't want to over do it. I also bought the graphite packing as back up if my TPFE attempted failed. My research says they both Graphite and TPFE work well, but TPFE is best for high temp applications. High temp as in steam not hot water. The TPFE worked well. Besides wasting time to find a custom washer, getting an outdoor faucet spigot apart was a pain. I cleaned up all corrosion. ^The other leak is due to a washer at bottom of valve stem where water drips out the spigot outlet not around stem at packing nut.* This requires you take the valve body out and replace a washer at bottom. In this case you do NOT use packing. You have to buy a rubber washer, but fortunately they are very standard and easy to find. You can buy a kit with a varity of sizes for less than $10. The other thing to know where that rubber washer seats at the bottom against brass, a grove in brass can form over time where washer sits. There is a tool to dress that out. Be ready to clean everything up from corrosion. I used nylon tooth brush, Dremel tool with rotary brass wire brush. When putting it back together a light coating of petroleum jelly on valve stem and threaded parts to resist corrosion helps. This includes where handle slips on stem. That was a pain to get off. Outdoor spigots out in weather for years or decades can become so corroded you can't take them apart. They have to be replaced. The way they are installed (at least mine) it is almost impossible to replace the whole unit without taking out drywall and/or brick. I hate they make access so difficult. These spigots are also sometimes soldered in as well. It is within DIY land but it would be a much bigger job than just repacking the valve. If you call a plumber we are talking big bucks to repack the valve. To replace it with access issues really big bucks. That does not include repairing dry wall which plumbers will not do. In my case the washer and dryer are in the way in a small laundry room and getting at that outside wall would be a big pain requiring both washer and dryer being moved.
Thanks for taking the time to write the descriptive comment. I'm sure viewers will find it helpful. One thing I can add is that if you can't get the outdoor faucet apart, treat the stuck threads/connection with PB Blaster penetrating oil. Don't bother with WD-40 - it doesn't work well for this situation. Ideally, treat the stuck part and wait 24 hours and then try to loosen. If that doesn't work, treat again and give it a few gentile taps.... try again the next day. Patience is your friend.
Thank you so, so much! I watched a number of videos and yours was definitely the most helpful! Cleaning off some of the deposits and packing rope seems to have fixed it 🤞. I didn't see any washer/fibrous material, maybe a little bit of waxy material/graphite, but not what looks to be a substantial amount. Hopefully didn't knock any/too much off when I was fiddling with the brush in the tight space 😬 but seems to be holding. Also little edge bit of the packing rope was squeezed on the threads and pokes out a bit.
Know How Now I enjoyed your video. The instructions / explanations were delivered in easy-to-understand language and the video was a great help. My question is, shouldn't the old worn out packing be removed and the channel be cleaned before installing the new one? There might be so much old packing in there already that isn't room for the new stuff. Or, after the old stuff is removed, there might be debris that could keep the new packing from sealing properly. I'm not being picky but as a former Navy engineer stuff like that pops up and catches my attention. You've got a lot of great videos and I hope you keep making more. Thanks!
Hi Jim, the packing material deteriorates over time. The easiest thing to do is to just add more so it can make a seal. The old material just "squishy" and likely no too dirty. If you turn the valve constantly, you might consider replacing it. For most people's situations, adding some more packing material is the easiest and best solution. I do have a video that shows how to do a rebuild on the valve. Thanks for watching the videos, it's nice to hear from you. th-cam.com/video/g8ORORWGsWw/w-d-xo.html&feature=emb_logo
Thank you for your very informative video on fixing a leaky gate valve. I was worried that I needed to replace the one in my basement that is connected to the cold water main. All it needed was a 1/8th turn to snug it down a little. There is still a tiny amount of water oozing from the stem, but it evaporates before dripping and is not enough to be concerned about.
On the 2nd water valve you show (about 4:30 in) wouldn't replacing that washer there on the end probably stop the leak without needing the packing rope?
The washer on the end of the stem presses against the valve's seat and shuts off the flow of water. The packing rope/material seals the valve's stem.... they are two different seals doing two different things.
Link to other Know How Now videos about water shut off valves you might find helpful: th-cam.com/play/PLvce66kQTjJRuwqmH0S5Shjfj5HeRdbMr.html
There are hundreds of videos at Know How Now, subscribe so you can always find the channel…. It’s free. I always respect your time and do my best to keep the videos brief, but informative. Check out the channel with this link:
www.youtube.com/@Know-How-Now/videos
You did a great job with this video! Anything I don't do on a regular basis, previous experience or nor, I watch a video for a review. I'm a fan!!
I'd been waiting for the handyman for over 2 weeks who was not turning up. Ultimately this video solved the problem in 12 seconds.
You've made good use of your time while waiting for the handyman. Good to hear you were easily able to fix the problem.
Your instructions were the most clear presentation that I have ever seen about plumbing. Not only did you show what to do with its contingencies, but you explained EXACTLY how to do it. AND you did not have your hands in the way when it came to performing any of the steps. I have watched a lot of plumbing videos about replacing and fixing parts including whole house hook-ups to wells, faucets, toilets, RO systems. They are usually frustrating because they do not include all of the information that you need - usually at the critical point where you need to see how they are inserting new parts. I realize the shut off valve is an easy fix (if you are lucky) and I am going to go straight to your website the next times I have a plumbing repair to do.
Thank you for the compliment. I try to make every video with all of the detail needed and as short as possible. TH-cam and internet search engines do not always reward this behavior and rank the videos at the top of the search page. I have many other home repair videos on the channel which are grouped by topic in the playlists. You can also search the channel's contents by typing in keywords in the search box on the Know How Now channel page. Here's the link the plumbing videos playlist: th-cam.com/play/PLvce66kQTjJTz0cqcI_HDnaLbNLDONCVP.html
this video saved my life. thank you
Wow, fantastic video! I am a DIYer and watch lots of vids on various topics. Rarely do you see one so well organized, thorough, and clearly explained. Hats off to you on this 5-star vid!
Thanks for the compliment, Dallas. I do spend a lot to time making the videos. I'm having fun making them and I like helping people solve problems. There are now over 200 how to/repair videos on the channel.
I was literally just thinking the same thing what a great job on this video.
We as women tend to give great detail to delicate matters. I watched several vids and hers was far superior. Sorry fellas! 😘
@@unbotheredmovement No need to tie things to gender here. Can we simply call something great when it is, and lacking when it's not based on objective measures and leave gender/race/religion out of it?
Greatness doesn't discriminate.
@@dallasbiggz7007 I agree, but listening to her gave me the courage to tackle my valve leak. So, if you don't mind, can I shout "Girls Rock" for a lil while longer? Please and thank you! 🤗
Clarity in instructions, speaking voice and accompanying visuals. Attention to detail while being succinct. Very well done and helpful.
You are welcome, George. Thank you for the compliments.
Hands down this is the best video on this subject, on TH-cam!
Wow, thanks the the compliment!
I had almost gone through an entire pack of Teflon rope trying to fix these leaks in my valve stems. You were really helpful showing the whole process of closing up the leak by continuing to tighten the packing nut little by little. Being afraid of overtorquing the nut, I wasn't tightening it enough for the leak to stop and had almost resorted to replacing the whole valve. Thanks a bunch.
You are welcome. It's my pleasure to help. Thank you for taking the time to comment. Your note will help other people with the same concern.
Fixed my issue in under 2 minutes. Everyone should make fixit videos like this.
I'm a licensed electrician but I've been doing property maintenance for the past 6 years. I do everything from carpentry electrical plumbing flooring etc etc pretty much everything. We have over 200 units and there's only me on a service truck. I run into my first packing nut leak today and was just going to replace the valve like I always do, but it would have cost me two or three hours to do so. Thank you for taking the time and your videos on TH-cam it was a huge help and very successful to me. 💯👍
Hi Rich, it's my pleasure to help. Thank you for taking the time to write, I enjoy hearing from people who watch the videos.
I can't thank you ENOUGH for this well-done, informative video! I had no idea what process was needed to stop the leaking at the shut-off valves behind the washer. But as I watched and listened to your video, it made perfect sense why the leaking was occurring at the faucets. As the comment below mentions, I couldn't find the valve rope ANYWHERE, and I was SO ready to get the leaking fixed. I decided that until I was able to locate and purchase the rope, I would improvise with "MEGATAPE" pipe thread tape. I figured I didn't have anything to lose, and it was worth a try. It was a little difficult because of the cramped space I was working in -- but I eventually got several rounds of tape wrapped around the stem beneath the nut (which I had raised up because of your instructions). I slowly screwed the nut downward, compressing and incorporating the tape into the threads. By the time the nut was seated where it needed to be, the leak had stopped! Obviously this is a temporary fix until I can get my hands on some valve rope, but for now the seal is holding. Thanks again for this wonderful insight into a perplexing problem.
You are welcome. Thank you for taking the time to comment about your experience....way to go on finding a temporary solution!
Thank you. This explanation is much more clear and the video angles make it easier to understand than other TH-cam videos on the same topic.
You are welcome, Ann. It's my pleasure to help. Thank you for taking the time to comment. I try to make quality videos.
FANTASTIC! I had a leaky valve, exactly the one you showed in the video. I live in NYC where EVERYTHING is expensive. Over the phone, all the plumbers I called quoted me over 100 bucks and some said I would probably have to have them replace the whole valve. They said that once it leaks from the stem, you need a new valve sweated into the copper pipes. That wold cost a few hundred dollars. I've changed washers and seats for many years but never knew how to stop the leaking around the shaft. After all the crazy estimates, I just said no. There MUST be a way to fix this myself. SO, I found your video and VOILA! I did the job and changed the washer while I was at it and it is PERFECT. Good thing you mentioned the sweet spot. YOU SAVED ME MONEY ! ! ! GOD BLESS YOU ! ! !.
Thanks for taking the time to comment about your experience, Tony..... way to go on using common sense and finding a solution to the problem! The channel has over 200 how to/repair videos that are organized by playlist. You can find them by clicking on the channel name. Many people have subscribed to the channel, its free, and you will easily be able to find all the Know How Now videos.
I truly liked the ways you carefully described things. You were very precise, thank you.
You are welcome. Thank you for taking the time to comment and for the compliment.
I appreciate that you made sure to explain things thoroughly. I don't know the exact terms and what things are called and you explained it all so it's easy to understand. Thank you!
You are welcome!
one of the best descriptions of fixing the problem. Very clearly explained in good English. Thanks
You are welcome. Thanks for the compliment and for watching the video.
I've never commented on a youtube video before, but this video deserved it. Thank you so much for saving me a lot of unnecessay work changing out the cutoff valve. Which is exactly what I was about to do before stumblng upon this video. Your video was informative and very well detailed.
You are welcome. It's my pleasure to help. Thank you for watching the video and taking the time to comment. If you haven't already done so, click on the channel name and check out the rest of the videos on the channel.
Wow! You saved me one plumber trip today! You gave such explanation in detail, and could follow it to the teeth. My leak stopped! God bless you and you may continue to use your expertise for many out there. Thank you again!!!
You are welcome. It always makes my day to hear that one of my videos was helpful.
After a handful of videos, I finally came across this one. Very informative, great lighting, good up close camera angles, clear audio, steady camera, etc. Thank you for making this video. Much appreciated.
You are welcome. Thank you for taking the time to comment and show your appreciation. I strive to make accurate and informative videos. Please consider supporting the channel and subscribe. It's free and it will allow me to continue to make more videos.
@@Know-How-Now Very helpful video. It's extremely frustrating when someone feels the need to add music & try to be funny. You kept your video short, easy to understand with clear instructions & good lighting.
Thanks for the compliment. I am always trying to improve the videos. This one was one of the earlier vintage. There are now over 200 how to/repair videos on the channel. I am having fun making them and it's nice to hear that people are finding them helpful. Have a great day.
Agree. There are too many poorly quality videos on TH-cam. It is so nice when a creator takes the time to produce a clear, understandable, high quality video.
ditto that! Great production values, wonderful audio. Poorly made videos make simple things like this difficult to do, and yours makes a simpler (but new to me) fix even easier. Kudos.
I watched a few videos before this one, and yours was by far the best. I just repaired my washing machine valve stem leak, and I have a few tips to add.
1 The big box crews may not know what packing rope is. Check online to make sure they have some. I went to one that didn't. I went to another that did.
2. Make sure that you get the nut threaded back on securely before you turn the water back on. I thought I had it, but no I didn't. Took another trip to the water shutoff. I should have gotten the smaller packing rope. You need a few nut threads exposed to catch hold of the valve threads.
3. The old packing in my nut was compressed to the point of being like a gooey concrete. It was difficult and time consuming to remove. Think about how the packing works. It has to be a bit squishy to close the gap around the stem. If there's no squish left, the gap won't close. If it's leaked before and been tightened to the max, you will have to clean it out.
Thanks for taking the time to write the additional detailed and helpful tips.
Lowes and Menards both carry the stem packing material, graphite and teflon
I was wondering if the old packing material had to be removed, I have 2 of these gate valves that are 46 yrs old, they have leaked before when shut off, I would like to fix them so they don't leak the next time I shut them off when I replace the washing machine with a new one.
@@dddddd2100 Maybe not. It would be best to remove it if you can.
This worked! Thank you so much. Saved me over a hundred dollars not to call a plumber. You show how easy it is to repack the valve, which I didn't realize I could do at all.
I inadvertently closed my browser window and lost your video. When I searched for "repair straight stop valve" again, it took me about ten minutes of looking through other, less helpful videos until I found it again. Once I had your video back up it took less than ten minutes to fix!
You are welcome, Daniel. Way to go on saving yourself some money! There are now over 200 how to/repair videos, organized by playlist, on the channel. I am always trying to improve the quality of the videos. If you subscribe to the channel, you will easily be able to find the videos.
I watched several videos and yours was the simplest and clearest. During the repair process (I used packing material) the shutoff handle broke. Went to my hardware store, got the handle replacement and put it on, and everything is working fine and no leaks. Doing laundry now. Thank you very much!
You are welcome, Margaret. Kudos to you on the successful repair.
An angel. My house shutoff valve was spraying water and I had visions of having to replace the valve. After watching the video, I tighten the bonnet nut and problem solved. This was a clear and precise presentation. Hugs your way. Thanks.
You are welcome. It's always good to hear the video was helpful.
A+++ Video! When 2 different plumbers came by the house to inform me that this was going to be a THOUSANDS of dollars job to replace the entire gate valve AND the piping to the street supply valve, I thought I’d check UTube in desperation, to see if I could find a solution.
This video gave me extremely clear and concise info on repairing this gate valve!!! Everything worked as instructed, and it worked as stated!
Thanks for taking the time to put such a great video together 👍🏼👍🏼👍🏼
You are welcome, Harold. Sorry to hear you had two bad plumber encounters. As the saying goes knowledge is power. Congratulations on the successful repair.
I just fixed two toilet valves using your video. I knew what to do, but it had been more than 20 years since I last had leaking toilet valves. I did a quick Google search to confirm what I remembered or fill in any blanks in my knowledge. I was right, it turned out, but until I watched your video I was afraid to do the work. Thanks very much for this.
You are welcome, thanks for watching the video and taking the time to comment. Way to go on the successful repairs.
Not the Valve video I was looking for, but the one I didn't know I needed
Thank you so much for this tutorial. I just repkaced my hot water heater and this exact thing happened to me with my stop valve. I was just getting ready to go to the hardware store then stopped and watched this first. The tightening tip on the bonnet totally worked. Much appreciated.
You are welcome. There are hundreds of home repair videos on the channel which are in playlists by category and you can search the channel page with keywords. Please subscribe, it's free.
@Know-How-Now Subd
Thanks, Welcome to Know How Now.
A very nice and helpful video. It gave me the confidence I needed to do the job. It saved me time, potential water damage AND a lot of money. Blessings to you!
It's my pleasure to help, Dar. Way to go on being resourceful and finding a solution & the successful repair.
Great video -Right to the point with no nonsense banter. My sink water valves leaked after I closed them and reopened them after replacement of a faucet. I closed the valve, took of the handle and slid off the packing nut. Inside was plastic and junk. After cleaning that mess out. I used Nitrile O-Rings from Harbor Freight and slide two down the valve stem. Tightened the packing nut and re-installed the valve Handle. The problem was that indeed the packing washer or whatever was used had failed. The O-Rings compressed and stopped the leak.
Thanks for the informative videos.
Thanks for the compliments and for taking the time to write about the details of how you repaired your valve. It will be helpful to others who have the same type of valve. Great idea to use O-Rings.
After watching a bunch of videos, yours was the only one that was easy to understand and worked! Thanks for posting! Now if I only can get my hot water heater up and running again, ugh ! Cheers
Thanks for the compliment. I try to make the videos as short as possible, but still include the information that you need. Good luck with the hot water heater!
Thank you so much!!! I had to turn off my tub's hot water and cold water feeds to replace an old faucet handle and back plane (escutcheon) and when I went back to open the shut off valves after, the hot water one started dripping! Your video's first thing to do, tightening that connection, WORKED! You know your stuff! Thank you, again!
You are welcome, Paul. It's nice to hear that you had an easy repair. Have a great day.
Excellent video! So well explained, I love how you get right to the point and slowly explain the repair without unnecessary banter. I had a leak and didnt want to call anyone.
Because of this video, I was able to fix it myself and my shut off valve is no longer leaking! Tightening the nut was enough, and I like the explanation of making sure I didnt tighten it too much....Thank you!
You are welcome. It's usually an easy fix.... just a little turn of the packing nut.
I've been through over a dozen videos looking for a solution for my washing machine shut off valves and this is the only one that even mentioned "tighten the packing nut." Thank you!
You are welcome, Rob. As many others have done, please consider supporting the channel and subscribe. It's free and you will always be able to find over 200 videos on the channel (If you don't want to subscribe, check out the
videos by clicking on the channel name). They are organized by playlist.
Everything is perfect about this video! Very informative and every step was shown at a close up!
Thanks for the compliment. I try to make quality videos.
Thank you very much. I discovered a leaky valve in the basement today (Christmas day of all day!) I was about to call a plumber but then decided to do a quick search on youtube first. I simply tightened the packing nut and NOT MORE DRIPPING.
You are welcome. Way to go on saving your Christmas day.
My father was a master plumber, and I still found this video very helpful. Thank yoou.
You are welcome. Thank you for watching the video and taking the time to comment. I am always trying to improve the quality of the videos. There are now over 200 videos on the channel that can be found by clicking on the channel name.
Excellent video and easy to follow!! My faucet stopped leaking, using the Teflon tape as you demonstrated with Teflon rope. Thanks a bunch!!
You are welcome, Deborah. Good job on being resourceful and finding a solution for the problem. As many others have done, please consider supporting the channel and subscribe. It's free and you will always be able to find over 200 videos on the channel (If you don't want to subscribe, check out the videos by clicking on the channel name). They are organized by playlist.
I just wanted to say thank you for this video, I almost left for a hardware store to buy another valve because it didn't even occur to me to just tighten up mine. You won a like
Thanks for taking the time to comment with some kind words and for the like. Have a great day.
I have an outdoor faucet that’s leaking like this. Now I know how to fix it - a great way to start my first day of vacation tomorrow! Thank you!
You are welcome, Gregory. Have a great vacation.
Hey, this works for needle valves too!!
I have a leaky valve under my sink. Watched a number of videos, but this by far was the best. Thank you.
You are welcome and thank you for the compliment.
I watched 6 other videos and this one explained the best and showed the best. Big thumbs up from me
Thanks for the compliment... I try to make quality videos. This was an early one, so it's a little rough. The newer ones are better.
Easy to understand the instructions for a beginner DIY with a well thought detailed information. Thank you.
You are welcome. Thank you for the compliment.
Great video. Clear explanation without technical stuff I can't understand. Good to know I don't have to go buy expensive tools. Just what I was looking for. Thanks so much.
You are welcome, Maryl. It's my pleasure to help.
Thank you so much! Fix my leak in 2 minute...1 minute was finding the wrench. Didn't need to add packing material just needed to tighten it.
You are welcome, Bob!
This video really helped. All of a sudden my hot water valve for my washing machine started leaking. I bought a new push fitting valve to replace it. Then I tried just tightening the nut and it stopped leaking. Thanks for the help.
You are welcome. Way to go on being resourceful and finding a simple solution before you replaced the valve.
Thank you so much for your clear, easy, directions on how to repair a leaky shut off valve. You saved me a lot of time and frustration. I was thinking I had to take the entire value apart and replace washers when, in my case, all I had to do was tighten up the packing nut to stop the leak. Much appreciated !!
You are welcome, Scott, it's my pleasure to help.
This video just made my day! I have had a leaking valve for the last year and a half and all i needed to was tighten the packing nut. Thank you so much!
It's my pleasure, Paul. Good to hear it was an easy fix for you.
This video is clear, concise, and saved my bacon from having to call a plumber as I don't know anything about plumbing! Thank you for your simple instructions!
You are welcome, Brandt! As many others have done, please consider supporting the channel and subscribe. It's free and you will always be able to find the almost 200 videos on the channel (If you don't want to subscribe, check out the
videos by clicking on the channel name). They are organized by playlist.
I have this issue on my old toilet shut off valve and have never worked on any sort of pipes or vales before, this is very informative! After I go buy some of the supplies I need I will try and fix it up, hopefully it all goes well! Thank you for making such a great video with so much detail!
You are welcome. Best wishes for a successful repair.
Wow, what I need to know to feel comfortable with this repair. Thank you for your time sharing your expertise in an empowering manner. Two thumbs WAY UP!
You are welcome, Bill. Thank you for the compliment.
Thanks for the video! I tried tightening the packing nut first, but it still dripped. I then tried the packing rope, tightened down the nut, and now no more dripping. Thanks again!!
You are welcome! It's always great to hear the video has been helpful.
You didn't seem to mention to never back off a packing nut if you overturn it. This will possibly cause a leak again, as the material has been compressed and now loosened. It's best to just adjust the nut slowly.
Wish I read this comment during lunch because it looks like I'm not having dinner tonight.
So what you're saying is, if you've overtightened the nut, it's not actually overturned, as it's not currently leaking. I sure wish you guys would keep your incorrect concepts to yourself.
I can't afford food and a plumber too!@@danielfiore8865
I love your videos. You helped me figure out a problem for a client and put money in the bank! Thank you!
You are welcome, Frank. Thanks for watching the videos!
Great tutorial, it was so easy for a beginner like me to follow and understand so good work and please keep sharing and thank you for knowledge sharing. I am now a proud subscriber to this channel!
Thank you for subscribing and the compliment. This was an earlier video, so it's a little rough. I am always trying to improve the quality and content of the videos. Have a great day.
Know How Now Your video sure helped me. Thanks. Saved me a lot of money because the packing rope was only $3.40! It stopped leaking after turning on the water supply!
You are welcome. Some times it's a little tough finding the packing rope, but it's worth the hunt.
A top-notch video. Clear and concise.
Thank you for this video - made the repair, no leaks now!! Thanks so much for posting.
You are welcome, Kent.
Thanks for explaining the details that other videos don't include like how many turns of the rope to use before tightening the packing nut. Etc.
You are welcome, it's my pleasure to help.
Thank you! Plumbing is not my thing, but I can tighten a nut. Your video helped me! I was planning on taking tomorrow off of work and spending 8 hours cutting and soldering pipe. It turned out that the nut was loose. Thank you!!
You are welcome. The 5 minute repairs are the best kind!
Thank you this helped us stop our leak! Now we can return the valves we bought.
You are welcome!
At 2:00, I'd recommend using a second wrench to stabilize the valve housing itself so that when you turn the packing nut, you are not torquing the pipe. That could result in a much bigger, more complicated issue than a leaky valve stem.
I agree, a back up wrench is best practice. As you know, you likely just need to turn that packing nut about 1/4 turn... not very much torque at all. Perhaps I should have mentioned it in the video, but I'd bet most folks watching the video and doing this repair don't have a 2nd wrench anyway.
Absolutely! This is a good point.
Thank you! I’ve been dealing with fixing plumbing issues here and there in my house for entire month. This one just one of the issues.
Thanks!
You are welcome! Best wishes for the plumbing repairs.
Thanks for the video and the inspiration to try fixing my valves again. I saw similar videos in the past and have had mixed results... some successful, some only partially successful, but "good enough". After watching your video, I thought I try it again, and now things are good!
You are welcome. Way to go on the successful repair!
This video just saved from a world off stress....Thanks for posting this.
You are welcome, Billy.
Thanks for taking the time to make this video. It is easy to follow. Well done.
You are welcome, it's my pleasure to help.
Thank you! My son in law just watched this and your video helped him stop the leak. I found your video tho! Thanks for sharing this! 👍❤️
You are welcome, it's my pleasure to help.
Thank you!! I’ve watched many of these, but the confidence finally clicked with yours!! ❤ I successfully fixed mine today and I keep peeking at it and shouting BONE DRY! 😂
You are welcome. I too find it satisfying when I have a successful repair. Way to go!
one of the best, most complete explanations I've seen. great video, really showed what was going on. thank you, you just saved me $400 in plumbing costs.
You are welcome, David. I always enjoy hearing that the video has helped someone.
Thank you so much for this video. Here I was gonna call a plumber and after I seen this video I was able to do fix it all by myself and it took a heavy weight off my shoulders.
You are welcome, Diana. Way to go on the successful repair. There are over 200 how to/repair videos, organized by playlist on the channel. If find a few spare moments, click on the channel name and explore. Subscribe and you will easily be able to find the channel. Thanks for watching the video and taking the time to comment.
This was so helpful and easy to understand. You just saved me a lot of money! Thanks so much!
You are welcome! It's always great to hear the video has helped someone.
This lady is smart. I would love to have her on my team at work!!
Thanks for the compliment, Thomas.
This was just what I needed to fix this problem!!! Thank you for posting this video!!!
You are welcome!
Thx for making this video. It helped me fix the leaking cold water valve behind my washer.
You are welcome. Way to go on making a successful repair.
Thank you! I had a very slow leak around a stem and tightened a tad. Now, no leak!
You are welcome! Way to go on the successful repair!
Why do all these videos show a new looking valve compared to mine which looks like a piece of coral?
😂
That's hilarious.
So true. Mine looks like the color of a Tiffany box. 😂😂
This may have just fixed our problem. Thank you so much for taking the time and effort to make this video!
You are welcome Erik!
O, that's *UNBELIEVABLE ! ! !*
I thought for a long time it's Mission Impossible to fix my dripping tap without an overhaul,
*BUT IT'S NOW FIXED BECAUSE OF YOUR VIDEO !!!*
*THANK YOU SO MUCH, YOU'RE SUCH A DARLING >3< >3< >3
You are welcome. It's always nice to hear the videos are helpful. As many others have done, please consider subscribing to the channel. It's free and you will easily be able to find over DIY videos.
Thank you so much for this video. It was soo well done. We were able to save $400 because we found this video, your explanation and tips! Thank you once again!
You are welcome. I try to do good things. There are many more plumbing and home repair videos on the channel.
Seen a few videos first as others have also stated in your comments. Yours was the best at explaining things step by step. I have a leaking cold water valve going into my water heater. I tried teflon tape but not rope. Will do this tomorrow. Thank you!
You are welcome, Mike. It makes my day to hear the video is helpful.
Phew!!! This video saved the day! Problem solved by 1:57. Thank you!
You are welcome. Way to go on finding a solution to a problem and making a successful repair!
Thank you!! It never occurred to me that all I needed to do was tighten that nut. I was about to head to the store to get a replacement valve.
You are welcome, Charles. Thank you for watching the video and taking the time to comment. Have a great day.
Excellent! 1/3 turn tighter fixed the leak.
wow thank you so much you are awesome...I couldn't figure out why it leaked if the tap was too loose. You are the best!!!
You are welcome, Isabel. It's great to hear the video has helped to solve your problem. There are now over 200 repair/how to videos, organized by playlist, on the channel. If you have a couple of moments, click on the channel name and check it out.
Thankyou!! I fixed 2 leaky valves in my home because of your excellent video!! Subscribing! 👍
You are welcome, Rich. Thanks for taking the time to comment. Welcome to Know How Now.
Thank you posting this great video. It helped me fix the leak in my shut off valve!
You are welcome, it's my pleasure to help!
You saved me a boatload of headache under our kitchen sink. Thank you so much 👍🏻
You are welcome, Daniel.
Great video, really helped me out with a late night leaky valve. Thank you.
You are welcome.
great video. You always provide clear and accurate information! Thanks!
You are welcome, thanks for the compliment and for watching the videos.
The "sweet spot" is a great tip! Didn't realize... glad i didn't just keep tightening
Thx for the vid - gave me the courage to tweak the packing nut - hey presto - no leak.....
You are welcome.
Thank God for the internet and theses people that know how to fix things just fixed my leaking valve in basement
It's my pleasure to help, Dustin. There are over 200 how to/repair videos on the channel. Have a great day.
I already did this job, but this would have been helpful. Outdoor spigot was leaking at stem. Got it apart (no easy task) and wasted time trying to find a rubber cone washer. I learned about packing material graphite or TPFE (teflon) types. I used the TPFE type and used larger diameter than the one show here in this video. I only wrapped it 1.5 times. There is no rule but it does come in different diameters. You don't want to over do it. I also bought the graphite packing as back up if my TPFE attempted failed. My research says they both Graphite and TPFE work well, but TPFE is best for high temp applications. High temp as in steam not hot water. The TPFE worked well. Besides wasting time to find a custom washer, getting an outdoor faucet spigot apart was a pain. I cleaned up all corrosion.
^The other leak is due to a washer at bottom of valve stem where water drips out the spigot outlet not around stem at packing nut.* This requires you take the valve body out and replace a washer at bottom. In this case you do NOT use packing. You have to buy a rubber washer, but fortunately they are very standard and easy to find. You can buy a kit with a varity of sizes for less than $10. The other thing to know where that rubber washer seats at the bottom against brass, a grove in brass can form over time where washer sits. There is a tool to dress that out. Be ready to clean everything up from corrosion. I used nylon tooth brush, Dremel tool with rotary brass wire brush. When putting it back together a light coating of petroleum jelly on valve stem and threaded parts to resist corrosion helps. This includes where handle slips on stem. That was a pain to get off.
Outdoor spigots out in weather for years or decades can become so corroded you can't take them apart. They have to be replaced. The way they are installed (at least mine) it is almost impossible to replace the whole unit without taking out drywall and/or brick. I hate they make access so difficult. These spigots are also sometimes soldered in as well. It is within DIY land but it would be a much bigger job than just repacking the valve. If you call a plumber we are talking big bucks to repack the valve. To replace it with access issues really big bucks. That does not include repairing dry wall which plumbers will not do. In my case the washer and dryer are in the way in a small laundry room and getting at that outside wall would be a big pain requiring both washer and dryer being moved.
Thanks for taking the time to write the descriptive comment. I'm sure viewers will find it helpful. One thing I can add is that if you can't get the outdoor faucet apart, treat the stuck threads/connection with PB Blaster penetrating oil. Don't bother with WD-40 - it doesn't work well for this situation. Ideally, treat the stuck part and wait 24 hours and then try to loosen. If that doesn't work, treat again and give it a few gentile taps.... try again the next day. Patience is your friend.
Excellent video. I had trouble lining up the handles correctly when reinserting the valve.
Thank you so, so much! I watched a number of videos and yours was definitely the most helpful! Cleaning off some of the deposits and packing rope seems to have fixed it 🤞.
I didn't see any washer/fibrous material, maybe a little bit of waxy material/graphite, but not what looks to be a substantial amount. Hopefully didn't knock any/too much off when I was fiddling with the brush in the tight space 😬 but seems to be holding. Also little edge bit of the packing rope was squeezed on the threads and pokes out a bit.
Know How Now I enjoyed your video. The instructions / explanations were delivered in easy-to-understand language and the video was a great help. My question is, shouldn't the old worn out packing be removed and the channel be cleaned before installing the new one? There might be so much old packing in there already that isn't room for the new stuff. Or, after the old stuff is removed, there might be debris that could keep the new packing from sealing properly.
I'm not being picky but as a former Navy engineer stuff like that pops up and catches my attention.
You've got a lot of great videos and I hope you keep making more.
Thanks!
Hi Jim, the packing material deteriorates over time. The easiest thing to do is to just add more so it can make a seal. The old material just "squishy" and likely no too dirty. If you turn the valve constantly, you might consider replacing it. For most people's situations, adding some more packing material is the easiest and best solution. I do have a video that shows how to do a rebuild on the valve. Thanks for watching the videos, it's nice to hear from you. th-cam.com/video/g8ORORWGsWw/w-d-xo.html&feature=emb_logo
Thank you for your very informative video on fixing a leaky gate valve. I was worried that I needed to replace the one in my basement that is connected to the cold water main. All it needed was a 1/8th turn to snug it down a little. There is still a tiny amount of water oozing from the stem, but it evaporates before dripping and is not enough to be concerned about.
You are welcome, George. Thank you for taking the time to comment. It's always nice to hear from the people who watch the video.
One small turn of the packing nut and BAM, leak fixed. Thanks!
You are welcome. Thanks for watching the video and subscribing to the channel.
On the 2nd water valve you show (about 4:30 in) wouldn't replacing that washer there on the end probably stop the leak without needing the packing rope?
The washer on the end of the stem presses against the valve's seat and shuts off the flow of water. The packing rope/material seals the valve's stem.... they are two different seals doing two different things.
Perfect amount of talking. Good descriptions. Many men could learn from this video (how to fix and how to talk).
Thanks for the compliment, Dennis. I do my best to keep the videos short, but give all the information you need. Have a great day.
Thanks so much fixed in 2 minutes, again thank you 🙏🏻
You are welcome, Thomas. It's my pleasure to help.
Truly excellent instructions and video.