Thanks dor the video. One of the best and most informative videos for the A6 3.0 TDI with ASB engine, with the error code P0401. Same here. Next week I'll go to my mechanic 😁
Thank you so much for this video! It helped me with my 3.0 tdi (bmk). Are you going to do the same cleaning operation with egr? It would be great! Best regards!
From the workshop manual (sorry about formatting - the table layout can't be copy-pasted into comments) : Component Nm Bolts/nuts M6 9 M8 20 M10 40 M12 65 Except for the following: Drive plate to torque converter 85 1) Terminal B+ to starter 16 Engine support to engine 42 Gearbox mounting to subframe 23 1) Engine cross member to: Longitudinal member 68 Engine mounting 23 Bracket for noise insulation to subframe 9 Drive shaft heat shield to gearbox 23 Coolant pipe to gearbox 22 Battery wire to fuse holder 20 Air pipe (top) to engine 9 Torque reaction support to engine 40 Air pipe (bottom) to longitudinal member 40 Intake connecting pipe to: Intake manifold 9 Connecting pipe for exhaust gas recircula‐ tion 9 Torque reaction support bracket to air pipe (top) 40 Hose clips Width 9 mm 3 Width 13 mm 5.5
Det virker...litt ihvertfall. Ville vært bedre å ta ut EGR'en samt kjøleren til EGR'en og renset de også... Hender at feilmeldingen kommer tilbake, men når jeg bare clearer den i software så tar det et par måneder før den kommer tilbake. Men på såpass gamle biler så er det vel et evig vedlikehold, og mer 'brannslukking' enn å fikse ting for godt?
Thanks dor the video. One of the best and most informative videos for the A6 3.0 TDI with ASB engine, with the error code P0401. Same here. Next week I'll go to my mechanic 😁
It needs soda/nutshell blasting for the intake valves too
Thank you so much for this video!
It helped me with my 3.0 tdi (bmk).
Are you going to do the same cleaning operation with egr? It would be great!
Best regards!
8:28 is my favourite part
Thanks from France.
how many Nm of Torque for the several bolt tightenings did you use?
From the workshop manual (sorry about formatting - the table layout can't be copy-pasted into comments) :
Component Nm
Bolts/nuts M6 9
M8 20
M10 40
M12 65
Except for the following:
Drive plate to torque converter 85 1)
Terminal B+ to starter 16
Engine support to engine 42
Gearbox mounting to subframe 23 1)
Engine cross member
to:
Longitudinal member 68
Engine mounting 23
Bracket for noise insulation to subframe 9
Drive shaft heat shield to gearbox 23
Coolant pipe to gearbox 22
Battery wire to fuse holder 20
Air pipe (top) to engine 9
Torque reaction support to engine 40
Air pipe (bottom) to longitudinal member 40
Intake connecting pipe
to:
Intake manifold 9
Connecting pipe for
exhaust gas recircula‐
tion
9
Torque reaction support bracket to air pipe
(top)
40
Hose clips Width 9 mm 3
Width 13 mm 5.5
Bravo pour la nature super
Did you feel that you got better fuel economy and more power afterwards?
Takker på forhånd.
The pre facelift models have dpf too?
how many miles had the engine done?
250 000 km - which is 155 000 miles
Ble feilen borte etter det? Jeg sliter med samme feilkodet og lurer på om den metoden du brukte virker:)
Det virker...litt ihvertfall. Ville vært bedre å ta ut EGR'en samt kjøleren til EGR'en og renset de også...
Hender at feilmeldingen kommer tilbake, men når jeg bare clearer den i software så tar det et par måneder før den kommer tilbake.
Men på såpass gamle biler så er det vel et evig vedlikehold, og mer 'brannslukking' enn å fikse ting for godt?
Does this engine have pdf filter or is without?
There is a DPF on this car. See here how I cleaned the DPF: th-cam.com/video/RvXIkEr2Ckg/w-d-xo.html