How To Spray Paint a Metal Gate
ฝัง
- เผยแพร่เมื่อ 24 เม.ย. 2020
- If you've got a metal gate that needs painting,, this video will show you how to prep and paint a gate using spray cans. Whether it is a rusty gate that needs wire brushing and sanding or just a gate that needs another coat of paint, this quick video will help you.
• How To Spray Paint a M... - แนวปฏิบัติและการใช้ชีวิต
Thanks so much! Glad I saw your video.
You're Welcome!
Well done, gonna do that on the strength of this.
Sweet-good luck!
What kind of spray paint should I use ?
(" I only poked out the overspray from a previous paint job") That was the main thing I wanted to see. Because on the video @1:19 I can see the metal screen is clogged.
Very nice thank you. Should I also use safety glasses to protect my eyes while painting?
It never hurts!
Hi Mike! Nice paint job! I wanted to know if you installed that metal screen yourself. If so, was it difficult. I would like to do my wrought iron gate.
I didn't do this one but have done many before. It is not difficult. The sheets are usually sold in 3'x5' screens and screw in with self-tapping screws. Be careful though-if you have to cut it, it is razor sharp so wear gloves and protect your pet!
Can you tell me what is the approximate time it would take to prepare and repaint one gate such as this?
Thanks for watching! Leave any questions or comments below:
My gate is exacly like yours. How many cans did you use? Thanks, it looks great
I think I bought 4 cans and used 3 of them. Too much is better than too little!
Thanks! 😊
What did you use to poke the holes through
I used a small nail, but you can use anything small and pointed.
does the spray missing go all over the place or is that just air which you can see ?
Mine was very atomized and so there was to overspray, but I use the cardboard to protect the surround areas
👍
Did you use regular spray paint ?
I used Rustoleum spray paint
That was great, but you didn't show how to pop the screen out and replace it.
Gillian Culff Actually I did not remove the screen, I only poked out the overspray from a previous paint job. If you want to remove the screen it’s held in place with a series of screws around the perimeter of the gate. Usually takes a small nut driver to remove them!
Don’t you need to put a clear sealant after that?
Nope! You can add more coats if you like but a clear sealer is not necessary
I thought the pet mesh would have been filled with paint
It will if you don't move the spray can enough!