I recently purchased my emove cruiser, after a few charges I noticed the charge port is starting to get loose , great video good thing I watched it because I was going to start taking off the battery cover and all
Hey voro, Another Useful video that you can make is, things we have to regularly do with our screws and everything about our tires and Tire pressure and things we should change... you know regular scooter stuff that we should do every few weeks. Thank you so much I think that would be really really useful. If you can please include wich Air pump is good for our scooter.
I have been trying to get the locking washer back in place for an hour. Out here sweating my arse off. Like you said you’ll get it eventually someday.😢 and my fingers not long enough to reach the damn nut tighten it shit
Hey aj i purchased a Emove cruiser and when i put it on the charger it made a spark in the charging port and now it doesn’t charge i bought a new charger also, You think replacing the charging port should resolve my issue?
The washer is kind of a joke. My factory installed washer came loose after about 3 weeks. Putting this one on took 45 minutes. The wires are not the same color as the video: mine were white and red. I pulled the wires just like the video stated and the red wire snapped leaving a piece of it in the connection to the battery. I had to unravel the red rubber to get to it. Carefully pulled the piece out and connected the new wire to the battery wire....then I tried to put the red rubber back over the connection and SNAP!!...the wire leading back to the battery snapped. Needless to say...my scooter is toast....lasted me 15 months...not sure if I'm going to buy another. May try another brand. Was showing signs of trouble...drove it to my doctor's office 2 weeks ago...came out and it would not start....suddenly about 2 hours it worked. You guys need to up your game!
Anyone that is watching this video and need to replace the port. PLEASE MAKE SURE TO UNPLUG THE WIRES BEFORE DOING ANYTHING ELSE! I had a stuck washer and made the mistake of A) not unplugging the wires first, and then B) using metal tools near the charing port trying to get the stuck washer off. I made accidental contact with the positive/negative on the port and BIG sparks flew and melted the connector to the point where I need to order a new one :( the scooter still runs and voltage reading fine, but I can't charge for now. BE SURE TO UNPLUG EVERYTHING FIRST!!
I just got my EMOVE Cruiser yesterday, and my question is... Can u over charge it? For example: I go ride for awhile, I get home to charge it, I forget to unplug and it's tha next morning. How damaging is that and it is unsafe especially when I'm sleeping.
Hi there, while we would not consider it "unsafe," per se, especially if you leave the scooter charging for an extra few minutes or hours, the standard chargers are not smart chargers, so over time, leaving the scooter plugged in after it has already reached full capacity in its battery will lead to damage to the battery cells and battery degredation over time, meaning the scooter will hold less and less charge, compared to when it was first received. This is why we recommend unplugging the charger from the scooter as soon as you can after it changes from "red" to "green," indicating it is at full charge.
Hey aj i purchased a Emove cruiser and when i put it on the charger it made a spark in the charging port and nis if doesn’t charge i bought a new charger also, You think replacing the charging port should resolve my issue?
Hey aj i purchased a Emove cruiser and when i put it on the charger it made a spark in the charging port and nis if doesn’t charge i bought a new charger also, You think replacing the charging port should resolve my issue?
![ฮักเทื่อสุดท้าย - บอย ศิริชัย [OFFICIAL MV]](http://i.ytimg.com/vi/-1PoPoQ-B-k/mqdefault.jpg)
I recently purchased my emove cruiser, after a few charges I noticed the charge port is starting to get loose , great video good thing I watched it because I was going to start taking off the battery cover and all
Thanks! My washer came loose and the whole unit was just hanging by wires. After watching your video it took just 15 minutes to fix.
Glad it helped!
Hey voro,
Another Useful video that you can make is, things we have to regularly do with our screws and everything about our tires and Tire pressure and things we should change... you know regular scooter stuff that we should do every few weeks. Thank you so much I think that would be really really useful. If you can please include wich Air pump is good for our scooter.
I can do this. Thanks for the detailed video!
You're welcome! Thanks for watching!
I have been trying to get the locking washer back in place for an hour. Out here sweating my arse off. Like you said you’ll get it eventually someday.😢 and my fingers not long enough to reach the damn nut tighten it shit
Is all wiring the same in all EMOVE scooters because it says to plug black into yellow but im pretty sure mine is black
Hey aj i purchased a Emove cruiser and when i put it on the charger it made a spark in the charging port and now it
doesn’t charge i bought a new charger also, You think replacing the charging port should resolve my issue?
Please AJ, can you tell me the size of the washer so I can use an open end wrench to tighten it. Ty!
Would this also apply to the Emove Cruiser S model as well?
The washer is kind of a joke. My factory installed washer came loose after about 3 weeks. Putting this one on took 45 minutes.
The wires are not the same color as the video: mine were white and red. I pulled the wires just like the video stated and the red wire snapped leaving a piece of it in the connection to the battery. I had to unravel the red rubber to get to it. Carefully pulled the piece out and connected the new wire to the battery wire....then I tried to put the red rubber back over the connection and SNAP!!...the wire leading back to the battery snapped.
Needless to say...my scooter is toast....lasted me 15 months...not sure if I'm going to buy another. May try another brand. Was showing signs of trouble...drove it to my doctor's office 2 weeks ago...came out and it would not start....suddenly about 2 hours it worked. You guys need to up your game!
Anyone that is watching this video and need to replace the port. PLEASE MAKE SURE TO UNPLUG THE WIRES BEFORE DOING ANYTHING ELSE! I had a stuck washer and made the mistake of A) not unplugging the wires first, and then B) using metal tools near the charing port trying to get the stuck washer off. I made accidental contact with the positive/negative on the port and BIG sparks flew and melted the connector to the point where I need to order a new one :( the scooter still runs and voltage reading fine, but I can't charge for now. BE SURE TO UNPLUG EVERYTHING FIRST!!
got it
Glad we could help!
-AJ
I just got my EMOVE Cruiser yesterday, and my question is... Can u over charge it? For example: I go ride for awhile, I get home to charge it, I forget to unplug and it's tha next morning. How damaging is that and it is unsafe especially when I'm sleeping.
Hi there, while we would not consider it "unsafe," per se, especially if you leave the scooter charging for an extra few minutes or hours, the standard chargers are not smart chargers, so over time, leaving the scooter plugged in after it has already reached full capacity in its battery will lead to damage to the battery cells and battery degredation over time, meaning the scooter will hold less and less charge, compared to when it was first received.
This is why we recommend unplugging the charger from the scooter as soon as you can after it changes from "red" to "green," indicating it is at full charge.
@@VoroMotors ok cool. I believe by this time next year. Ima need a battery
I don't know what I did Wrong but after putting mine in, I plugged in my Charger and POP 💥 WHAT DID I DO WRONG???
any reason it gets loose
Is this also possible with the touring?
Yeap!
How can I get an emove cruiser in Cameroon
We can ship to Cameroon, just go onto our website - Press Add to cart and checkout
Is that if you burnt it out?
It could be for a variety of reasons! burned out, ripped out, or just malfunctioning. - AJ
@@VoroMotors so do I just gotta replace the 3 pin
You need a 6 year old child or be willing to rip all the skin off your finger to get that damn washer back on. Every thing else was a piece of cake
Hey aj i purchased a Emove cruiser and when i put it on the charger it made a spark in the charging port and nis if doesn’t charge i bought a new charger also, You think replacing the charging port should resolve my issue?
Hey aj i purchased a Emove cruiser and when i put it on the charger it made a spark in the charging port and nis if doesn’t charge i bought a new charger also, You think replacing the charging port should resolve my issue?